Hipyo commissioned a keyboard build - How To Millmax Guide
HTML-код
- Опубликовано: 15 июл 2023
- Use code ANDYV50 to get 50% off your first Factor box at bit.ly/3H9tJB3!
SOLDERING TOOLS HERE: kit.co/andyvnguyen/keyboard-s...
I stream on Twitch ( / andyvnguyen ) on Tuesdays and Thursdays at 5:30 PM PT.
Join this channel to get access to perks:
/ @andyvnguyen
Let me know what you think of the review in the comment section below!
Please help support the channel by using the affiliate links on this page:
www.andyvnguyen.com/affiliates
All of my keyboard part recommendations are in this page:
kit.co/andyvnguyen/keyboards
My keyboard commission page:
www.andyvnguyen.com/commissions
Follow me on my social media platforms!
linktr.ee/andyvnguyen
Join my Discord community:
/ discord
Recorded with:
Sony A7IV - kit.co/andyvnguyen/streaming/...
Sony 35mm F1.8 FE - kit.co/andyvnguyen/streaming/...
Sound recorded via Oktava MK012 Hypercardiod - www.frontendaudio.com/oktava-... 
Наука
Use code ANDYV50 to get 50% off your first Factor box at bit.ly/3H9tJB3!
Thank you for suffering for me
It’s ok, just whip that big azz knob for me brother
I'm sorry Andy, but we'll need to have you pre-arrested after all that innuendo! 😂😂😂😂 But seriously, the video is very informative. When I studied electrical engineering at college in the early 1990s, the desoldering wick was my favourite "tool" for desoldering. One tip, if the desolder pump jams, you can use a straightened paper clip to clean the tip.
HAHHA sorryyy.
Oh shoot forreal? A paperclip won't get melted?
That =3 transition 🤌 *chefs kiss*
NGL been getting bored of the same old same old keyboard vids lately from all the channels. Thanks for doing something different and informative!
Of course! Trying to keep it fresh.
Been waiting for this video. HYPE HYPE HYPE
Factories are not legally allowed to use lead in the solder which is why we hate desoldering switches from the factory so much. 63/37 tin/lead solder is the best with a rosin core and allows you to easily solder with a lower temperature easily.
Exactly what I wanted to comment. If factories use leaded product, they would not be allowed to sell their products.
Love the editing lately :- )
Editor doing work!
alot of sticking in and pulling out here. rated r
I'm still at 5:23 of the video, but I want to say what really helped me with my desoldering is applying flux/soldering paste on each soldered pin before I do the sucker and iron method. It has not failed me thus far, and I have never had to resolder a failed suck in order to try again. Hope this helps someone out there who can't afford the big solder sucker gun.
Oh definitely. If you have a troublesome one that's def the move!
Hipyo dont like soldering because he dont like to get cancer. Ur a hero
awesome video andy!
thank yoU!
I say if you plan on being in the hobby for more than a couple boards. You NEED the FR-301. Thing literally is so easy to clean and won’t jam if you take care of it. It’s like a cast iron pan of desoldering.
unless you desolder boards for a living, u dont need a 340 dollar solder sucker to have a decent experience. that money could go to better things imo
@@d-floe you can find these brand new for 230 and on OfferUp for even cheaper sometimes. It’s a lot of money don’t get me wrong. But the time saved and potential to save my PCB by only desoldering 1 time makes it so worth it. But if you’re good at the solder sucker too by all means save some $$
Reverse millmax solved the issue with the 0305 to make the switch sit flush on the pcb. I wish the 3305 was available back then when I soldered my Volcano660
Using low melt solder makes the process extremely easy - adding low melt solder to a joint will create a solder alloy with a significantly lower melting point then regular leaded and unleaded solder, as well as staying liquid for a much longer period of time (3-5 seconds after removing the iron) giving plenty of time to use a pump/ wick with braid. I pretty much used only braid and low melt solder when I desoldered 2 keyboards for friends and it was easy... Also dont forget flux, you can never use too much flux as flux promotes nicer flow.
👀👍!
really like the effects on the new intro!
ps what plate mounted stabs did u end up using?
I just trimmed the stock ones tbh
THE INTRO LMAOOO
that =3 transition
As stabs did you use the tx plate mount?
I have 300 to buy high end alluminium case with very good sound, i have tofu, keychron and many more. But i want buy one of the best alluminium high end case with solid sound.
Can you advice me plz ? Only with pre order for the best ? Thank you in advance.
Unless you love atomic purple, I also think the window for a product like this has closed.
I think these are pretool MX reds, damn should be worth a buck
I was afraid that the only "quality" way to desolder is with something powered vs one of the manual pump deals. I've already gone as far as getting a better soldering iron but maybe this is what my life is. Sometimes, solder wick doesn't get into the crevices.
Yeah desoldering prebuilts sucks .. sorry.
I know this is kinda of a off topic question but whats your current configuration on your unikorn?
Inks on alu half with locked tsangan bottom
does anyone have the link to the clip @5:47 i need it very badly
u sus
yo finally
sorry it took forever
@@AndyVNguyen cant wait to see hipyo make it "thock"
You said the soldering guide was coming but this answered all my current questions. Unsubscibed. I don't need you any long. Hardy har har. Great content man.
doesnt sound that much better than before