Love the idea, but this one needed a lot of bugs worked out. After 4 passes there was already a wear pattern on the wire brushes. The whole motor could have been clocked 15-20 degrees to ensure all brushes made contact. Feeding was from the wrong side and double feed rollers should have been used. A dust shield with vacuum port would help keep a user healthy.
Can you please tell your camera man that not EVERY shot needs to be done with a moving camera? The whole video has a nervous appearance. This is not an action movie! (same goes for the music btw)
Moving camera may cause disconcentration, please just use it to improve the techinical view of object. And it is terrible for viewing in double velocity. Thanks, and dont stop the projects!
A nervous appearance? FFS, it's a sad world when a man has anxiety while watching men do men shit and they get nervous because of how the camera moves. Go watch something about unicorns and rainbows if you can't handle it.
yeah maybe the cameraman can use a motorized slider or dolly track tripod .. it can give more stability ada better to watch ❤ , i love all ur videos anyway ! from Malaysia ❤❤🎉🎉
Love this! Only addition I would make besides some sort of dust collection is adding a front feeder that is chain/belt driven by the rear feeder to make the first foot or so of feed in a consistent speed before it reaches the rear feeder. May not be easy with the motor height controls on the left side, but I figure the sprockets/pulleys would be on the right with just an adjustable support on the left. Same idea as the rear feeder except just the opposite side. The idea may not be worth the trouble. Might just be an OCD thing. 😂 I wish I had a shop to learn to do just a fraction of the things you do on this channel. Very inspiring!
Love the vids. If I could make an editing suggestion, it would be much appreciated if you filtered out some of the high KHZ noise, maybe 8khz and above? It's especially harsh in the fast forward montages.
Glad to see you've finally built one of these. I saw one of these being built years ago though it had 3 sides of wire wheels at about 9 inches wide and was adjustable. The guy used nothing but rusty metal and was onrle of his first builds. If your using rusty metal building yourself one of these is definitely a must ..nice one extreme
you can install another actively moving roller on the oposite side with a v-belt, also can do a square like housing from the dust side that ends up into a vacuum. If you do these 2 mods you will have the ultimate rust remover machine
Love your builds, thanks for sharing them! 👏 A hopefully useful tip: spring gas cylinders are often mounted upside down (as much as possible) so their oil lubricates the seals. Makes the gas inside last longer; looks odd but works better.
I am always very happy to see when you upload a new video, I love your machines and they inspire me! The idea of the dust remover is very good. You could even adapt it to a surface grinder or polisher as others already said. Even if I consider you my masters, I would like to make 2 recommendations: 1: You really should add a dust collector. It just has to be a sheet dome with a connector to a vacuum, but you have to care more about your health, and also the flying rust increases the pace at which metal rusts in your workshop. 2: Don't torch the wood while you grind it. Sawdust is extremely flammable and one enough wood dust volume has filled the air it's gonna create a huge fireball. Lovely video as always, greetings from your biggest fan.
It's not a bad machine but it needs an emergency stop you can reach from both sides, and ideally a push stick. Like other comments pointed out, that thing is an arm mutilator if you get too close
the first bed roller in front and after the brush head should be powered and have a down pressure roller in front and after the brush head as well. a dust collection hood would a bonus, otherwise the whole thing needs to live outdoors
You could also add extraction system as you can clearly see where all the dust goes from the video. This way you don’t have it flying all over your shop and you do not breathe it in as at first instance it goes directly at you when you feed the piece into the tool. Just a suggestion. Great work, though.
Loved it. Maybe make an attachment for drum sander disks, and consider adding a second puller ahead of the spinning wheels to have a more consistent speed.
nice job. Functional can be expanded by replacing wire brushes to scotchbrite wheels. Hight adjusting system is easy to make, but difficult to use. I think spring loaded adjuster may be more handy. And definitely need to add a fender with a vacuum pump to take away and absorb rust particles and wood dust. But it still a good shop made machine. Way to go.
You should put a roller right under the wire wheels so they hit the beginning and end of the work piece with the same pressure. Good job though. Edit: An infeed top roller would also help.
NEEDS a fume hood SO BAD! I know no one would actually try and make this for themselves (cause its pretty dumb when an angle grinder does the same thing for a fraction of the space in your shop) but this will fill your whole space with deadly rust particles after mere seconds of use.
really cool I would have placed a support for the shaft opposite to the motor to increase the insability of the brushwheel. Anyway AMAZING JOB !!! as usually 10+ Result !
Why make the complex machanism to move the motor, its weight should be enough to hold it down, and you could just lift it with a crank to where you need it.
In all honesty, what are you missing in the way of tools? Here goes: a laser welder and a laser cleaner. I'm quoting these tools because I've seen some really impressive videos on their use. Among other things, the laser cleaner can strip and remove rust with disconcerting ease.
Alright i see a version 2 of this. With like a spring tension almlst like a wood shipper how the feed wheels auto adjust to the size of the tree. So something similar for the feed rod on your rust remover. I just dont know if there is a spring small and strong enough to make it happen.
AWESOME! Such creativity and skills! Now spray paint it. I wipe down and spray paint all my good scrap metal so it doesn't rust (I live in a humid area) This works great to prevent the rust and the paint comes off easily using a paper towel and Acetone.
What will happen if the drum wire rotor turns backwards? It would be more efficient right? You could try it, it 's just changing two wires on the connection.
do some upgreats, put in front first roller to grab straght profile next put the feed roller in front of brush and instal last roller in old feed place take out profile from brushes, this will help u to clear more linear than now when u need in first step control feed with your hands
Hi, and thank`s for Your machine ideas. Just a tip, from an Engineer/Innovator: Make the main (bruch) motor reversible, and as the "drive motor" goes both ways, it`s just easier to reverse the brush, and clean up the ends, later? Or, if the "feeder" is powerful enough, just revers, the feeder. How`s that? Just a thought. from a Finn in Diaspora
Buy a laser welding machine. They include a magic death ray gun that turns rust into carbon practically instantly by moving the beam on the work piece. They're better than TIG for thin metal welding too. A barrel of Evaporust is useful to have too.
this seems impractical. I like that it doesn't give of sparks like a grinder. but having to go over every side several times just seems like a bother. A sand blast box with troughput holes would be a better solution. It would take care of the dust as well.
So... the roller bearings are never going to go bad? Since you put them in the frame via through bolts, then welded the frame around it... how are you going to replace them when they fail? Should have slotted them instead of through bolted. Otherwise, you're going to jave to cut the frame apart to replace a roller.
Надо было ещё щётки сбоку сделать , тогда очистка заготовок в два прохода была бы а не в 4. И систему пылеудаления нужно обязательно приспособить к этому станку 👍👍👍
this is like watching somebody build a automatic breakfast cooking mousetrap boardgame machine im waiting for the eggs to roll down shutes crack open into pans, toasts popping out and flying onto plates lol
Всегда лайк, но все же, с вашими навыками и оборудованием, очень странно, когда опорные ролики неразборны, штурвал наклоняется вместе с платформой, нет пылеудаления, проходной резец ниже центра (на быстросменной резцедержке)..
Приводные ролики надо было делать по обеим сторонам от обрабатывающего. Слишком долгая настройка под толщину профиля, удобно для массовой обработки, но не для мелкой серии, можно было сделать приводные ролики с ходом на жесткой пружине 2-4мм, ибо можно будет запускать только калибровку, иначе может вырвать и зарядить в пузо. И кстати отличная идея обжигать дерево без вытяжки стружки, деревянная взвесь отлично взрывается:)
A very basic surface grinder with a wire wheel on it. Not good for small or odd shaped parts. TIP: "Making a rust removal machine" for small or odd shaped parts. Buy an old but working electric cement mixer, fill it to one third full if dry grit, pebbles or tumbling media and then add your parts. Put on PPE and switch cement mixer to the "ON" position. The rotating drum action will tumble the parts in the grit and in a short time your odd or small shaped parts will be clean.
Bonita maquina con los cepillos circulares, si se quita la roña de los tubos o de lo que tu quieras poner, pero la roña la dejas por todo tu taller y no digamos nada de la que tu tragas ahi tienes que istalar un aspirador no muy grande, un cordial saludo, desde ESPAÑA.
I'm really surprised that you haven't made some bad azz electro plating gun and oven. So much more durable considering the environment most of your projects live in.
Well, the casing needed to be made with an exit for the vacuum cleaner!
that plus the drive roller is on the wrong side, or better there should be one on each side.
@@xConundrumx I think if you do that the brush motor direction should be reversed as well.
Love the idea, but this one needed a lot of bugs worked out.
After 4 passes there was already a wear pattern on the wire brushes. The whole motor could have been clocked 15-20 degrees to ensure all brushes made contact.
Feeding was from the wrong side and double feed rollers should have been used.
A dust shield with vacuum port would help keep a user healthy.
Now you need a rust-dust removal machine. Better get building one!
A big one!!!!
Project 0149 coming!
A nice homemade vacuum table
Can you please tell your camera man that not EVERY shot needs to be done with a moving camera? The whole video has a nervous appearance. This is not an action movie! (same goes for the music btw)
looks fine to me
Moving camera may cause disconcentration, please just use it to improve the techinical view of object. And it is terrible for viewing in double velocity. Thanks, and dont stop the projects!
A nervous appearance? FFS, it's a sad world when a man has anxiety while watching men do men shit and they get nervous because of how the camera moves. Go watch something about unicorns and rainbows if you can't handle it.
Jep 10 seconds into the clip and i know exactly what you mean
yeah maybe the cameraman can use a motorized slider or dolly track tripod .. it can give more stability ada better to watch ❤ , i love all ur videos anyway ! from Malaysia ❤❤🎉🎉
Like a wood planer for metal retooled for rust removal. Great work as always. Just needs a rust/dust collector on the entry side of the device.
Love this! Only addition I would make besides some sort of dust collection is adding a front feeder that is chain/belt driven by the rear feeder to make the first foot or so of feed in a consistent speed before it reaches the rear feeder. May not be easy with the motor height controls on the left side, but I figure the sprockets/pulleys would be on the right with just an adjustable support on the left. Same idea as the rear feeder except just the opposite side. The idea may not be worth the trouble. Might just be an OCD thing. 😂 I wish I had a shop to learn to do just a fraction of the things you do on this channel. Very inspiring!
Absolutely great job, a nice idea and a lot of work. Congrats !
The construction is craftsmanship at it's best. You know exactly what you are doing !!
Thank you for your support and your good comments! :)
Дай Бог вам здоровья, средств и бесконечных идей! Радует что Родина не обделена самородками как вы! Удачи!
Love the vids. If I could make an editing suggestion, it would be much appreciated if you filtered out some of the high KHZ noise, maybe 8khz and above? It's especially harsh in the fast forward montages.
Glad to see you've finally built one of these. I saw one of these being built years ago though it had 3 sides of wire wheels at about 9 inches wide and was adjustable. The guy used nothing but rusty metal and was onrle of his first builds. If your using rusty metal building yourself one of these is definitely a must ..nice one extreme
you can install another actively moving roller on the oposite side with a v-belt, also can do a square like housing from the dust side that ends up into a vacuum. If you do these 2 mods you will have the ultimate rust remover machine
Love your builds, thanks for sharing them! 👏
A hopefully useful tip: spring gas cylinders are often mounted upside down (as much as possible) so their oil lubricates the seals. Makes the gas inside last longer; looks odd but works better.
I am always very happy to see when you upload a new video, I love your machines and they inspire me!
The idea of the dust remover is very good. You could even adapt it to a surface grinder or polisher as others already said. Even if I consider you my masters, I would like to make 2 recommendations:
1: You really should add a dust collector. It just has to be a sheet dome with a connector to a vacuum, but you have to care more about your health, and also the flying rust increases the pace at which metal rusts in your workshop.
2: Don't torch the wood while you grind it. Sawdust is extremely flammable and one enough wood dust volume has filled the air it's gonna create a huge fireball.
Lovely video as always, greetings from your biggest fan.
Thank you for the plans. Love all the videos!!!!!!!
It's not a bad machine but it needs an emergency stop you can reach from both sides, and ideally a push stick. Like other comments pointed out, that thing is an arm mutilator if you get too close
Следующее видео: вытяжка для этого станка. А так классная работа👍
I’ve never seen someone chamfer like that. What a bloody time saver!
Running a file down the edge? Do it all the time quickest way to knock a burr or sharp corner down without having to use your tooling to do it
@@TheBigSki no to move both axis on the lathe at the same time to move diagonally
the first bed roller in front and after the brush head should be powered and have a down pressure roller in front and after the brush head as well. a dust collection hood would a bonus, otherwise the whole thing needs to live outdoors
Awespme engineering. I love it. Just add a rust dust collector/vacuum and it's complete
You could also add extraction system as you can clearly see where all the dust goes from the video. This way you don’t have it flying all over your shop and you do not breathe it in as at first instance it goes directly at you when you feed the piece into the tool. Just a suggestion. Great work, though.
"Зеленый" Как обычно фантазия не даёт покоя рукам 👍👍👍 продолжай!!!
Loved it. Maybe make an attachment for drum sander disks, and consider adding a second puller ahead of the spinning wheels to have a more consistent speed.
Version 2.0 should have auto-adjusting height using springs so you don't have to make manual adjustments
That’s one way to create a firestorm in the comment section. Expertly crafted content that stretches the imagination.
Ok you rocked on this one... It blow my mind.
Really fabulous. And what's more, you have a CNC cutting machine.
A smart man would have made a dust collection attachment for this device.
Nice work have you considered adding a vacuum to reduce dust
A connection to vacuum is much needed as rust in the air is bad! Not mentioning the wood dust
Why you don’t make a dust filter? For wood and rust particles?
You should add another brush part on the side. 2 sides at a time!
Plasma drill press was new to me. Cool.
nice job. Functional can be expanded by replacing wire brushes to scotchbrite wheels.
Hight adjusting system is easy to make, but difficult to use. I think spring loaded adjuster may be more handy.
And definitely need to add a fender with a vacuum pump to take away and absorb rust particles and wood dust.
But it still a good shop made machine. Way to go.
I’ve actually been looking for something to clean my wood as I torch it. Nothing on the market currently
Cool build
I'm def seeing a shop vac dust collector in the future
I'm from India
Your all work is amazing
Best wishes for all team
I find that keeping your pipe oiled prevents rust in the first place. A good virgin oil is best too, rather than the recycled variety.
Awesome. Your machine works perfectly. Well done, dude.😃😃😀😀😄😄👍👍
I have two drum sanders for woodworking. I was thinking about converting one to use for metal. Any thoughts? They’re both 220 V motors
Отличная нужная приблуда, руки золотые у тебя! Думаю пылеотвод ты придумаешь. Удачи с твоими проектами.
You should put a roller right under the wire wheels so they hit the beginning and end of the work piece with the same pressure. Good job though.
Edit: An infeed top roller would also help.
Could be adapted to make a surface grinder with stone wheels and some adjustments 👍
NEEDS a fume hood SO BAD! I know no one would actually try and make this for themselves (cause its pretty dumb when an angle grinder does the same thing for a fraction of the space in your shop) but this will fill your whole space with deadly rust particles after mere seconds of use.
So where do you think the dust particles go when you use an angle grinder?
really cool I would have placed a support for the shaft opposite to the motor to increase the insability of the brushwheel. Anyway AMAZING JOB !!! as usually 10+ Result !
Why make the complex machanism to move the motor, its weight should be enough to hold it down, and you could just lift it with a crank to where you need it.
Super cool as always, dust extraction would have been nice 😊
Way cool, guys. A question: you choose to do not realize a support for the shaft of the engine to have the possibility of cleaning wider pieces?
Nice. When you want to replace the bearings, you'll have to cut it open.
Nice professional build. We shared this video on our homemade tool forum last week 😎
i would like to get one of those hand held rust remover lasers
Extreme indeed. I like it.
In all honesty, what are you missing in the way of tools? Here goes: a laser welder and a laser cleaner.
I'm quoting these tools because I've seen some really impressive videos on their use. Among other things, the laser cleaner can strip and remove rust with disconcerting ease.
Alright i see a version 2 of this. With like a spring tension almlst like a wood shipper how the feed wheels auto adjust to the size of the tree. So something similar for the feed rod on your rust remover. I just dont know if there is a spring small and strong enough to make it happen.
AWESOME! Such creativity and skills!
Now spray paint it.
I wipe down and spray paint all my good scrap metal so it doesn't rust (I live in a humid area) This works great to prevent the rust and the paint comes off easily using a paper towel and Acetone.
As always great job my friend😉
Make it Extreme, This video is fantastic! I liked it a lot!
Thank you! :)
profil sürme rulosunu keşke tüm alt rulolara zincirli sistemle yaysaydınız daha güzel olurdu bence. güzel çalışma.
What will happen if the drum wire rotor turns backwards? It would be more efficient right?
You could try it, it 's just changing two wires on the connection.
Yum, flying rust particles
My thoughts exactly.
Womp womp
dust collector.
Sorry, can't talk. My lungs are full.
It's iron, relax, our bodies can handle it...not as if its silica...🙄
do some upgreats, put in front first roller to grab straght profile next put the feed roller in front of brush and instal last roller in old feed place take out profile from brushes, this will help u to clear more linear than now when u need in first step control feed with your hands
Good job on the Extreme bits !
great work and great idea thanks my dear friend ❤♥
Add auto spring adjustment system according to the size of the pipe
I would have made the motor shaft with a LH thread for the brush containment nut. Very cool!
Your chest X-rays are going to be amazing!
Some dust collection would be great 😃👍
Anyways, great invention 👍👍
Highly suggest putting a trap and lid on that. Also, wouldn't a plainer work better for wood?
Good job mister beautifully done
Amazing machine❤
Чувак да ты чёртов гений!!!
😂😂😂😂
It really needs an in-feed roller. By the time you reach the out-feed half of the material is partially cleaned...
Now you need a dust extractor. Just an idea for next video.
20:10 would love to see his face reaction getting smothered with all that rust :D Nice work!
C'est super vous avez toujours des bonnes idées 👍
Hi, and thank`s for Your machine ideas.
Just a tip, from an Engineer/Innovator: Make the main (bruch) motor reversible, and as the "drive motor" goes both ways, it`s just easier to reverse the brush, and clean up the ends, later?
Or, if the "feeder" is powerful enough, just revers, the feeder.
How`s that?
Just a thought.
from a Finn in Diaspora
Title alone told me these guys are making a metal planner, that or a massive sandblasting setup.
Very cool and very useful
Прекрасная работа. Только необходима вытяжка. Пыль, любая, в определенной концентрации взрывоопасна.
Buy a laser welding machine. They include a magic death ray gun that turns rust into carbon practically instantly by moving the beam on the work piece. They're better than TIG for thin metal welding too.
A barrel of Evaporust is useful to have too.
You need one with an inflatable sanding drum
Ok, I see, I need a whole factory to do such machine
Pretty cool. Very useful. All the junk yard warriors are jealous now.
heheh indeeed. thank you for your support!
this seems impractical. I like that it doesn't give of sparks like a grinder. but having to go over every side several times just seems like a bother. A sand blast box with troughput holes would be a better solution. It would take care of the dust as well.
So... the roller bearings are never going to go bad? Since you put them in the frame via through bolts, then welded the frame around it... how are you going to replace them when they fail? Should have slotted them instead of through bolted. Otherwise, you're going to jave to cut the frame apart to replace a roller.
cut once and you wont have to cut it again. very small detail in the big picture.
Надо было ещё щётки сбоку сделать , тогда очистка заготовок в два прохода была бы а не в 4. И систему пылеудаления нужно обязательно приспособить к этому станку 👍👍👍
this is like watching somebody build a automatic breakfast cooking mousetrap boardgame machine
im waiting for the eggs to roll down shutes crack open into pans, toasts popping out and flying onto plates lol
Does it make sence to build switching so that motors can turn rotation direction - you get to the end and flip a switch and send it back
Add Dust Extraction , and tool is ready for market
Всегда лайк, но все же, с вашими навыками и оборудованием, очень странно, когда опорные ролики неразборны, штурвал наклоняется вместе с платформой, нет пылеудаления, проходной резец ниже центра (на быстросменной резцедержке)..
You should build a dustless sand blasting setup.
I don't have the skills to make that so I drop it into a tank of Evaporust.. Very nice work as always...
I am not rich enough to have a tank of Evaporust so i use citric acid(E330 food preservative).
I really like your videos 😀
Приводные ролики надо было делать по обеим сторонам от обрабатывающего. Слишком долгая настройка под толщину профиля, удобно для массовой обработки, но не для мелкой серии, можно было сделать приводные ролики с ходом на жесткой пружине 2-4мм, ибо можно будет запускать только калибровку, иначе может вырвать и зарядить в пузо. И кстати отличная идея обжигать дерево без вытяжки стружки, деревянная взвесь отлично взрывается:)
A very basic surface grinder with a wire wheel on it. Not good for small or odd shaped parts.
TIP: "Making a rust removal machine" for small or odd shaped parts. Buy an old but working electric cement mixer, fill it to one third full if dry grit, pebbles or tumbling media and then add your parts. Put on PPE and switch cement mixer to the "ON" position. The rotating drum action will tumble the parts in the grit and in a short time your odd or small shaped parts will be clean.
Me parece muy buena herramienta 👏👏👏👏. Pero un buen extractor evita el oxido en el aire flotando 😜
Bonita maquina con los cepillos circulares, si se quita la roña de los tubos o de lo que tu quieras poner, pero la roña la dejas por todo tu taller y no digamos nada de la que tu tragas ahi tienes que istalar un aspirador no muy grande, un cordial saludo, desde ESPAÑA.
Seems like the feed roller should be placed on the other side of the motor
Respirator not optional.
How to spend 80hrs and $7k to do what you could do with a $15 grinder just to breath the same rust dust.
Hell yeah! 🤘🏼😂
In reality, everything that a machine do, you can do with your hands, with this way to thinking, would be a reason to exist any automatic machines.
@@MiniCasaBrasileira until they take over the world
I'm really surprised that you haven't made some bad azz electro plating gun and oven. So much more durable considering the environment most of your projects live in.
You mean powder coating?
@@TheVivaLatrina
lol yeah.