@@samuelhumphreys7712 Rc Tanks & Trucks 24/7... and it was or is a land rover 1/8 scale not jeep. Apologies for that. He is considering couple different trucks to put it in. Just a matter of seeing which rc best suits the conversion.😁👍 and if your interested he has a hit and miss engine also that he reviewed.very interesting if your into the mechanical side of rc.👍😁
Very good Kev, it looks very impressive quality wise, much better than I thought and easy to setup as well, can't wait to see it running in a car. I've an RC hovercraft projec I've wanted to build for a while and that might do the job, as I was after something different than just a brushless setup. You could also try that in a lightweight dragster kit.
dream no longer this is how you do it, one you pick out the buggy you like two you call the place that sells them, three you pay for said buggy. four it arrives at your home after said time. i hope that helps
Hook the vent hose from the fuel tank to that brass barb on the bottom of the engine..it will blow the excess nitro back into the tank while giving the tank a small amount of positive pressure to help with fuel delivery to the carburetor.
Hi kev. Just want you to know that your videos almost always brighten up my day after school.
Same here. I always wonder what he'll post next
Ya'll need to watch Johnny Q90's channel... I've seen him work on this very engine... Machined his own water-cooled system for it...
yeah i also watch his videos he is great
He now has a V4 engine he's going to work on!
I even say YES!!! and I am a subscriber of JohnnyQ90.
He put this one in his semi right ?
I do
Where's the supercharger🤔? Or at least a twin turbo😂‼️
SLD RC that would be awesome!
@@treedoge6831 the best part is it would be a tying that keb would do👍‼️
He needs quad turbos
@@treedoge6831 and it would actually work on this engine!
I recommend that he uses a supercharger because they have instant torque unlike turbos which need to be at a certain rpm to give torque
Put a replica V8 and put it in the Rwd Burnout
A replica 1/4 scale engine is almost 10 grand!!!
Bruh
Mitch Puterbaugh why?
Yeah
@@Riley_Edgar25 it is a small following so it's all custom made by one guy and it's all made by hand with c&c machine and lots of man hour's.
*Wtf he didn't even put the engine in the toy car lol* 😂😅
Yeah . WTF?
Right
up! click bait!! wh da fu
Next vid
Click bait
Ohh....damn....very real good engine 👍never seen like this in Malaysia 😎😎
I think your better than PewDiePie (no offence)
That's not hard considering PewDiePie is a cock.
Someone doesn't know simple spelling...what a shame.
Poopdippie
@@19Herofade92 phuck u
@@mikey3816 You must be an artist, because your comment was very colorful. Bass Turd.
23 likes 4 visits omg youtube is broken!! Your amazing kev
Ok dude chill
Def put in to the TRX4 Kev 🥰🥰🥰
Love your videos Kevin. The best RUclipsr 👍👍😁😁😁😁
Looks good ... the beard 🙂
Put a longer exhaust get some back pressure and make it sound better😉😉
Kev put in in the monster truck. That be cool💯💯💯
Got a RUclipsr here in Australia putting this engine into one of those cheap 1/8 scale jeep crawlers. Awesome little engine.👍
What's the name of the youtuber?
@@samuelhumphreys7712 Rc Tanks & Trucks 24/7... and it was or is a land rover 1/8 scale not jeep. Apologies for that. He is considering couple different trucks to put it in. Just a matter of seeing which rc best suits the conversion.😁👍 and if your interested he has a hit and miss engine also that he reviewed.very interesting if your into the mechanical side of rc.👍😁
@@dwaynekaye2000 Ah thanks
Ni
Hi
You actually got one of these they are absolutely amazing I was wondering when u were going to review one😀
WOW! Galling ng mga bagong videos mo sa
iyong CHANNEL, funny and entertaining!! Inspirasyon ka saming mga BAGONG
RUclipsrs.. more power sayo!!..
Can't wait to see it 🤗
You could use a 2 or 3 speed automatic gearbox 😍😍😍
Wow its a true sound🤩🤩🤩
That was pretty cool. Be waiting for that engine fit video...👍👍👍
JohnnyQ90 pulled it off.....with a ton of knowledge and machining skills of course 🤣
Good ...i like it
This was a great video, Kevin.
So cool keV 🤘🤘🤘🤘
Kev you have the best eBay course I’ve done it 😀😀😀😀😀😀😀😀
nice! :)
Very good Kev, it looks very impressive quality wise, much better than I thought and easy to setup as well, can't wait to see it running in a car. I've an RC hovercraft projec I've wanted to build for a while and that might do the job, as I was after something different than just a brushless setup. You could also try that in a lightweight dragster kit.
I don't think it has that much power that's why i thought crawler with its low gearing, they do a v4 too :)
Finally! People have reviewed this motor, but I haven't seen it applied in RC vehicles
Can't wait for you to start the build 😁😎👌🏻
That is possible,,, whoah awesome 👍👌👏 mini engine to a toy RC car,,, it's very nice... thanks for sharing your video my friend...
Wow similarly same with real engine car nice bro.
Cool engine kev. Nothing like a tea and some nitro...hahahaha.
haha yes!
Best RUclipsr
When you go to like the video but its allready liked. 🤔
Yes.. Yes you can put an RC ENGINE in an RC CAR
Love your vids❤️❤️🤘🏻🤘🏻
Awesome little engine 👍
Nice!!cool video ,new suscriber ✌
Welcome aboard buddy :)
can't wait to see it 😉
Friggin Epic!!!! Can’t wait for that one boys!!!
THIS IS GONNA BE BADASS
I like what I'm seeing so far , I'm subscribing now
Stemp is a nut! Love that guy!
YES! absolutely should build a crawler around it
Ive seen these before but not installed in a RC, so that would be epic to put into one of the crawlers
How about the V4 version in the gravedigger?
1st love the vids keep up the worck
@emerald knight thx
I see you found a good use for the dodgy arrma remote 👍
haha about all its good for, and maybe a crawler
Do it but make sure you get some grease on the cam lobes itself and I would do a 2 stroke mix
@RC CRAWL actually the tube leaking nitro is for the oil catch normally there's another connection on top for the oil to come in.
Kev, put it in a crawler as it should have more power at low speeds.
Put it in a monster truck an make an custom dual stack exhaust for it 🙏
Roses are red
Violets are blue
I luv KEV and so should you!!!❤️❤️❤️
It's just a fancy nitro engine...it does look cool..thumbs up
Imagine putting a mini v12 in one
Really liked this video and want to see the rest
That's gonna be a sweet mod for 1 of your crawlers,cant wait to see it🤘
It’s always been my dream to build an rc
dream no longer this is how you do it, one you pick out the buggy you like two you call the place that sells them, three you pay for said buggy. four it arrives at your home after said time. i hope that helps
Hook the vent hose from the fuel tank to that brass barb on the bottom of the engine..it will blow the excess nitro back into the tank while giving the tank a small amount of positive pressure to help with fuel delivery to the carburetor.
Exactly what I am doing with mine bro
You should try to put that in the x maxx
P.S.your my favorite youtuber
Only engine...... No car....... 🚗🚙........ 😏😏😏
That is so cool! I hope it works out for the TRX4!
Put it in a crawler , will be fun.
That would be awesome on a crawler put a turbo on it kev please that would be look and sound awesome.
I literally got a rc car ad before the vid
Yes gonna wait for that, putting that engine in a crawler, sounds interesting kev😎
Cool project!
Didn’t think it would take long for people to start doing this.
That's way kool hope u put it in the crawler. Love what u do man
FINALLY!! AN ENGINE FOR MY ANATOMICLY CORRECT DRIFT CAR!!!
Hi Kev lov ur vids
I can’t wait to see this video
looking forward to the next episode
Haha Epic Kev 😎
Excellent! !!!
Put it in the 65 chevy
Can’t wait till u get this motor fitted it and running finished
Your my favourite yputuber and fellow Brit !!!
That machine is a awsome beast, I can't wait to see what you do with it.great into to it.👍👍💪
👍👍👌that's an awesome little engine kev. Beard looks OK too 😅👍👌great video cheers mate
I saw you smoke a joint before shooting this video😂😭💀
so what
I was looking for this comment, his eyes are blazing red
video: I PUT A ENGINE IN A RC CAR
Me: YoU mEaN lIkE a NiTrO?¡
Absolutely you should put this in a crawler
Can’t wait to see it in action!!!
I'm eating
candy while watching this video from Halloween yesterday🚯🚯🚯
Awesome Kev
Put it in a drift car, that would be sick.
Agreed
Nice I have wanted to design some mounts for this engine for one of my Rc conversions 😎🤓👍🏼
Yeah bro trx4 would be sweet in what ever you sit the body on im doing for you kev 😍😍😍👊
This is going to be great.
Alright I was waiting so long for you to get that engine! Can't wait to see it in the crawler! Keep the awesome content coming Kevin!👍
Put a race profile cam and a tiny turbo!
Hi great video as usual
You and your buddy drink tea ... meanwhile in America me and my buddies are crushing beers 😉.
Hell yea America brother
No wonder out country is over weight 😂
Really looking forward to seeing this come together! I think clutching is really the only obstacle!
Do it! 😁
0:32
I ❤ tea. But that's coffi
Nice Engine
Wow a "REAL ENGINE" in an R/C... what next an electric R/C car?
You need to pack extra grease into the rocker cover to protect the camshaft and lifters, love the vid.
🔥🔥🔥🔥🔥🔥 wow
Trx-4 full exaust out the side to😂😂
Wow!! Sick bro!
Stemps in love😂 got to see it in trx