Buy Engine Here - www.enginediy.com/collections/v8-engine-models/products/cison-small-block-v8-44cc-1-6-scale-water-cooled-4-stroke-8-cylinder-gasoline-engine-internal-combustion-model-kit-version 🚗Win one of my cars raffall.com/kevin_talbot
The first thing you should do with these, is take a large turkey needle. And inject it with oil before you rotate a single piece. Then let it sit. Drain it and subtract the difference. Then add according amount. People mess up putting the rings on wrong.
The idea looks good on paper, but I feel like it’s just gonna end up on the shelf next to the nitro crawler but should make for a good couple of videos👍…
Watching this after watching Jonnyq90 build one is like seeing chimps with a gun 😂😂😂 You just have to watch but you know something awful gonna happen. Great content.
The other 3 pin plug coming off the cdi unit is for a tachometer I’m pretty sure but you don’t need it, it just shows the rpm of the engine when it’s running
100% I'm building one at the moment and it's not needed to start the engine, but it does help a lot with tuning the engine by getting the timing and idle right.
even mounting it behind the cab would look epic kev. probably a more suitable area as well with shaft straight to rear diff housing. then eventually in future drop another v8 upfront possibly?😁
These engines are precision, finicky machines... I don't think they're "RUclips Kevin" friendly... 😅 I am rooting for the project's success, it would be an awesome rig! Good luck Kevin, you can do it! 💪
The machining on that scale small block is absoloutely exquisite. 2 large isn't cheap, but alot of precision machine work, scaling, mechanical drawing and attention to detail went into manufacturing that puppy. I want one.
@@turbocateyeS475nope all you need is connections and a social network I got a Toyota Avalon XLS which is the highest trim level for it for 500$…. Runs and drives and stops. Only thing is the radio is trashed and the speakers except one is blown out but it works. And I own a bmw 328i E92 and the sunroof in that thing barely works than the Avalon. I love it and 6 cylinder motors.
That engine is absolutely adorable lol Could fit it in the Raminator and make a really scale model of the full size monster truck. Probably wont have nearly enough power, but it would look really cool lol
Start making the motor mounts for the truck while your waiting for parts. Just because it doesnt run currently doesnt mean you cant start working on making motor mounts and drive shaft connections
Kev, Smart move using Castrol.👍 Make sure you run the engine super rich during break-in. I do believe with the other two you tried in the past both fell victim to running lean, that's when you run in to problems.😏
Next video on this build should be like your other videos where if you break it you just keep going on with the video length and instead of cutting it short. It’s better the longer video seeing it get to the done then you partially work on it and it end in the same results as last time
Buy Engine Here - www.enginediy.com/collections/v8-engine-models/products/cison-small-block-v8-44cc-1-6-scale-water-cooled-4-stroke-8-cylinder-gasoline-engine-internal-combustion-model-kit-version
🚗Win one of my cars raffall.com/kevin_talbot
FIRST REPLY!!
There's a 4 speed transmission there too.
Here is something that may help with a gearbox with your rc car.
Did you offset the piston ring gap on the toyan engine if didn't it won't have enough compression and won't run right the got to be at 10 and 2
I just recently got an Arrma body shell just like that. I was wondering what chassis is underneath yours?😊
Do a special video for 3 million subscribers
Everyone like BPPCUS.... Comment to get it to the top
@@JoshuaBlick-i9eno
Yes@@JoshuaBlick-i9e
Jump the Lamborghini!!!
I am going to ask my 500 subscribers 😁 to join his channel 😀 sure it will help him 😜😜😁😁
First thing to do after any engine build is to turn it over by hand for a couple of turns ..make sure its free and not binding up ...
Yes
It's basically the same as a "real" full scale motor so it makes sense
The first thing you should do with these, is take a large turkey needle. And inject it with oil before you rotate a single piece. Then let it sit. Drain it and subtract the difference.
Then add according amount.
People mess up putting the rings on wrong.
Kevin, I’ve waited so long for this video just for no progress😢
Same guy same
Exactly
Yep...
Give the man a break. He puts so much work into his other videos. If your just going to complain then dont comment at all
Imaginez le travail.....❤ impressionnant ..génération z tout tout de suite 😢
The idea looks good on paper, but I feel like it’s just gonna end up on the shelf next to the nitro crawler but should make for a good couple of videos👍…
Probably!
That's the whole point 😂
Watching this after watching Jonnyq90 build one is like seeing chimps with a gun 😂😂😂
You just have to watch but you know something awful gonna happen.
Great content.
FINNALY!!!!!!!!!!
The other 3 pin plug coming off the cdi unit is for a tachometer I’m pretty sure but you don’t need it, it just shows the rpm of the engine when it’s running
100% I'm building one at the moment and it's not needed to start the engine, but it does help a lot with tuning the engine by getting the timing and idle right.
That is correct
even mounting it behind the cab would look epic kev. probably a more suitable area as well with shaft straight to rear diff housing. then eventually in future drop another v8 upfront possibly?😁
I've been waiting for this for so long i cant wait for it to happen!!!!!
Wow 😮 Love your videos kev!!!
So close to 3 million kev you can do it
I love your videos so bad
I have been waiting soooo long for this video
Real
That engine is sick!!! The realism is out of this world!
I've been waiting so long for this video 😂
Part three better be coming soon :)
Been waiting so long for this
Really like these little engines KEv
Finally never mind
Been excited for this little build!
Been waiting for this one. 🚗🔥
Holy. We waited for ever. Just for you too mess it up again
LETSSS GO PART 2 also great videos
Let’s gooo!!!
I admire his mentality of never giving up! 😮
With the slanted front mounted distributor, it more resembles a Mopar engine.
These engines are precision, finicky machines... I don't think they're "RUclips Kevin" friendly... 😅
I am rooting for the project's success, it would be an awesome rig! Good luck Kevin, you can do it! 💪
Great vid!!!! Love your channel! 😄
He did it!!!
Les go im early
The machining on that scale small block is absoloutely exquisite. 2 large isn't cheap, but alot of precision machine work, scaling, mechanical drawing and attention to detail went into manufacturing that puppy. I want one.
Man it’s so nice!!
Those headers looked like 3d printed metal.
id love to see a v12 aswell, that would be epic
i also think you should put those into a rovan baja 1/5 scale
I saw a v12 in an RC panther tank. Pretty scale
Kev that little engine is epic
First minute crew 😂😂😂😂
Much love ❤
kev we get it , it's the same as ur bloody monster truck.... as if I had forgotten
WE LOVE YOU
Don’t give up Kevin
watching kevin talbot after a hurricane hits hard
Finally after 9+ months 😀
Always something to look forward to 👍👍😁😎✌️
can't wait for the next video man....... I'd love to own of those engines👍
I've been waiting so longg 🎊
Amazing video
Kevin Talbot like the number 13 bus. Nothing for ages then 10 come at once!!! 🤣 Love the content, great entertainment and energy.
Exactly that!! Gonna slow down again soon, need to get back to filming
I love this channel
Classic kevin😂 makes us wait for this amazing project just to muck it up and make us wait some more lol. Hey, they say 3rd time is the charm though
That little V8 is so incredibly badass!
Favorite RUclipsr saludos desde México
For 2100$, I can buy a whole car!!!
Just comment saying this!!! 😂
@escos0410 😂 At least, I'm not the only one that is thinking like that
For 2100 US$ i get maybe a defective Nissan leaf.
Barely and it probably won't make it home. Post-C0vid prices got us messed up out here. Used to get daily bashers for $800
@@turbocateyeS475nope all you need is connections and a social network I got a Toyota Avalon XLS which is the highest trim level for it for 500$…. Runs and drives and stops. Only thing is the radio is trashed and the speakers except one is blown out but it works. And I own a bmw 328i E92 and the sunroof in that thing barely works than the Avalon. I love it and 6 cylinder motors.
FINALLY PART 2!!!!
Dude your killing me for real now I gotta wait another year to see the rest of the video
Love your vids kev
That engine is absolutely adorable lol
Could fit it in the Raminator and make a really scale model of the full size monster truck. Probably wont have nearly enough power, but it would look really cool lol
Would be epic but nowhere near the power it would take
@@KevinTalbotTV they make bigger ones that make more power but there expensive
Verry cool idea bud
Start making the motor mounts for the truck while your waiting for parts. Just because it doesnt run currently doesnt mean you cant start working on making motor mounts and drive shaft connections
man what's all the hype lol have to wait for the next one now pmsl
Impressive, not only the engine quality but Jonesy's ability to disable a pallet jack and a forklift in one go.
🤣🤣
been waiting for this video for ages!
The engine would make a great mid mounted rear wheel drive layout. 👍🏻
Amazing vid as always Kev 🎉
“Engine expert” breaks everything mechanical in the shop 😂😂
goated kev
Almost 3 mill Kev, you deff deserve it 🎉🎉🎉
Finally
Edit: and still no progress at all lol 😂
This engine is better than a Toyan V8 engine, make the most of it
I love how Kevin makes all his videos fun and entertaining
Kev, Smart move using Castrol.👍
Make sure you run the engine super rich during break-in.
I do believe with the other two you tried in the past both fell victim to running lean, that's when you run in to problems.😏
I think that putting the engine in the back would be cool if the front ends up not working. You could even do some side exit exhausts
Keep it up love your videos😃🎉
Those extra wires on the CDI box are for a digital screen you can order from them that monitors the engines vital signs.
The irony of Kev not being able to read the word kamasutra will never not be hilarious 😂
What’s the irony?
Nice doctor mate
Almost at 3 mill🎉. Go on brother.
Supercharge it kev❤
I love your videos and your my hero
That V 8 would look great in that semi truck!
Kev love it mate
ive wanted to see someone do this for forever.
As cool as those little v8's are, they dont make nearly enough power to enjoy in a RC car
Prob be same speed as a brushed tamiya lunchbox ha
I'm French and I love your videos I've been watching since 2018 and this is the first time I've commented but don't change you're very cool
Pretty awesome. Hope it works. Love you videos keep it up. God bless.
Special people. The blind leading the blind 😂
Yo Kevin, I’ve been waiting for this video for so long😂😂❤❤
To get your pellet lifter out put some big wood blocks under the forklift forks and lift the front up with the forklift
Next video on this build should be like your other videos where if you break it you just keep going on with the video length and instead of cutting it short. It’s better the longer video seeing it get to the done then you partially work on it and it end in the same results as last time
I've been waiting on this since I seen the guy build one. I missed part 1. Brilliant 👏
Brilliant? It didn't even start 😢
This is so cool. I love this stuff.
Need a tiny little dyno for the RC collection
Wouldn't it be a much better idea to mount the engine in the centre of the chassis??
This'll be interesting.
Yes part two
Who has a LAN line in 2024? Love your content!
Hi Kev love this channel and I love you energy ❤
I cant wait to see this
It's going to be an amazing to watch series, Kev!!
Sweet little engine, looking forward to seeing it run. Tilt mast all the eay back, place wooden block under mast, tilt mast forward, shes free!
I dunno how I missed this video
Man, I'm envious of your success in life and here on youtube. Good for you.
Hey Kev. Cison is working on a gearbox for that engine. That could be perfekt for that Projekt 😎
Kev and nitro / petrol engines = no worky as usual...