Thank you for these ideas for troubleshooting. I Have a Ricoma EM1010 and my operator manuals and parts book were pdf files on the USB sent with the machine. But they simply do not offer full info on these machines. You tube and FB pages have been indispensable for finding solutions to many issues! After trying for 2 days to rectify an issue with my machine going off center when restarting the design, your tip to look at info on OTHER machines lead me to a FB page that had a helpful guide of how to reset embroidery parameters to center the hoops! WHile it was not specific to my machine, it was a different model Ricoma, and the Control Panel information was similar enough that I managed to get the hoop recentered and the project was not a total loss! Thank you!
Hi, a question when putting the cap frame on, I pressed a lot on the base that moves the frame backwards and I felt that it moved a little backwards and now the cap is not centered within the caps parameter, is there a way that I can reset it factory so that the axis that you moved back is back in its factory place? Thanks
I was embroidering my cap and the needle broke, and I loosen the screw too much but I got that taking care of. Now it says my design is out of the hoop area now it says needle is not position correctly. How do I get it to position correctly so I can finish my design, I'm up to the last triming to be completed.
I recently embroidered some left front panel Richardson 112 caps. Now I can’t center my full panel caps on my driver. It keeps going back to my left panel. Any ideas to help me out?
I am having troubles with my bobbin thread. My top thread is not catching my bobbin after doing a routine maintenance on my tc-series machine. I can't seem to find anything that'll. help me resolve this issue. I have an order that's due to be delivered today, I am freaking out. Can someone please help me?
I got a broken needle in my rotary and removing the finger board is difficult not enough space for the Philips skrew driver even the thin one any advice
Can u help me pls. I'm having problem MAIN MOTOR OVERTIME. If i start the machine the degree show 90 and the machine is not moving n show in the monitor Main motor overtime. What is the problem excatly? I chk needle 1 to 12 by manually all is ok.
Hello was wondering if you can help I have a ricoma MT 1501 and I keep getting a 100 degree error I keep putting it on 100 and it keep saying it's need to be 100 degree I checked everything I don't know what else to do.
Hi I have issue with two of my needles not engaging to start embroidery. Needle 3 and 4 doesnt engage (doesnt go down to start the embroidery) all the other needles work well. i have tried different things but nothing helps to get them work. Help appreciated here please
I have an issue with my MT1501. I suffered a jam and now the shaft and the motor doesn't turn. Have you ever seen anything like that? Axis is at 100 and it's on a needle. I'm thinking the motor died but no way to actually know. Reciprocator moves manually so it seems fine there.
Hello, thats happened to us a couple of times. Sometimes the machine is trying to protect itself by locking up. It could have detected an obstruction. We've had to manually rotate the needle bar, align the needles to get it back. Service should be able to walk you through it. If you get it to work, I would love to know your solution. Take care.
I have an issue with my 1501 tc where the thread is not being trimmed when the machine goes for a trim it has caused issues because the machine goes on because the thread stay attached an starts to tug on the head which has caused some placement issues
Something is misaligned with your cutter. You have to clean out the knife housing, right above the bobbin housing area, make sure no thread or debris is there and do a cut command to make sure it’s cutting without any obstruction.
Haha, freak out is the first thing I do. I have a Ricoma EM1010 and it has NOT been a good ride since I got it. I’ve been with it a year and there’s always something. Right now I have a thread stuck in between that section where the bobbin goes and it’s too hard to pull out. I already removed the plate and looked in there and took all thread from there, but this one piece I can’t take out. Que hago?!?!?
Ok, yes, its happened to me too. You want to remove the needle plate and see whats holding it back. Most likely its tied in a knot somewhere. Get a good view and try to pull gently to untie the knot or the obstruction if possible.
@@RomeroThreads I did, and I took all the thread out but there is one piece that's jammed in a place where I cannot reach. The thread is peaking out and I can grab it, but it's to tight in there and I can't pull it out, it breaks.
How can you undone a bobbin stick into a cap hat? I can’t take the cap off cause it seems tangled into to. I don’t want to pull and mess the machine up.
Hello, you have to remove the hat (slightly pull it off) then cut the thread. If its bird nested, with a large amount of thread and its stuck, you're going to have to cut the hat. and open up the top of the bobbin housing area and remove all the thread.
@@RomeroThreads did it and fixed it thank you. Sorry one more question, i was able to remove it without damaging the hat and i wanted to continue the thread once i backed it up to where the thread was missing it won't thread after i push start. any suggestions?
For needle breaks, I first make sure the hat is hooped correctly, then ensure I have the correct needle. Usually 75/11 sharp should be good, sometimes you need 80/12 sharp. If thats not the problem, i’ll double check the design make sure I don’t have any area too dense. There is no 1 answer, you have to move backwards and see where the problem is at.
I have a question. My trimming function is inconsistent. Sometimes is leaves no tail. Sometimes it does. Sometimes its short, sometimes its long. Ricoma MT1501
I also faced the same problem but by this video i resolved my problem I think this video will help you a lot. 👉 ruclips.net/video/OKAXkuBxG_Q/видео.html
I also faced the same problem but by this video i resolved my problem I think this video will help you a lot. 👉 ruclips.net/video/OKAXkuBxG_Q/видео.html
Ricoma does not send a Manual with the machines they sell. At least the two 1501 machines I bought they did not send anything like that. I asked them for one and they told me thy don't come with them. Kinda hard referring to it if you don,t have one. If they made them for us owners it might save them a lot of phone calls from customers.
@@RomeroThreads Hi , I'm very new at this and I am watching your video and its great. However, I would like to have the manuals, trouble shooting manuals and a better understanding of how it all works. Please can some help with a link to where these are on their website. THANK YOU!
Hello, sounds like a needle or bobbin issue. Make sure the needle is straight and facing the correct side. Make sure your bobbin area is completely clean, bobbin is turning in the correct clockwise rotation and check your thread path. Thanks.
You need to turn the red knob that’s on the side of the needle plates it’s a round knob. Turn it slow until a needle number shows on the screen. You should be good to go when you see the needle number on the screen. This is the needle that happens to be over the hole that receives the needle in the bobbin. So depending on what needle happens to be over that hole, that is the needle that will display. This happens when the machine is not recognizing there is a needle over the needle hole above the bobbin. Should be a easy fix.
Love this video except for the compressed air. Engineers will tell you to never use compressed air because it can force dust or lint further in to the machine mechanics
Ive been using compressed air forever. Some techs have different advice. Its all a matter of preference but a small brush wont get those hard to reach corners. Thanks for the feedback.
Compressed air is fine to use if you actually know how to use it. They recommend not using it because not everyone knows not to sit there and hold the trigger until freon starts coming out.
With much respect, we should never use compressed air on our machines... It promotes rust deep within the machine, and forces lint and debris deeper than where it originally is.
![Lil Uzi Vert - Chill Bae [Official Music Video]](http://i.ytimg.com/vi/D7F42F_JM3U/mqdefault.jpg)
I have had my MT-1501 for about a year now, but just now really starting to get serious about using it. Your videos are AWESOME!!
How do you know when it’s tine to replace the rotary hook ty😊
im constantly getting skipped sticthes, i have a ricoma swd 15. ive had it for 2 years, the timing is perfect. would a bad rotary hook cause that
Thank you for these ideas for troubleshooting. I Have a Ricoma EM1010 and my operator manuals and parts book were pdf files on the USB sent with the machine. But they simply do not offer full info on these machines. You tube and FB pages have been indispensable for finding solutions to many issues! After trying for 2 days to rectify an issue with my machine going off center when restarting the design, your tip to look at info on OTHER machines lead me to a FB page that had a helpful guide of how to reset embroidery parameters to center the hoops! WHile it was not specific to my machine, it was a different model Ricoma, and the Control Panel information was similar enough that I managed to get the hoop recentered and the project was not a total loss! Thank you!
I’m having a main axis reverse issue I need help with I can’t find a video to fix
Hi, a question when putting the cap frame on, I pressed a lot on the base that moves the frame backwards and I felt that it moved a little backwards and now the cap is not centered within the caps parameter, is there a way that I can reset it factory so that the axis that you moved back is back in its factory place? Thanks
I was embroidering my cap and the needle broke, and I loosen the screw too much but I got that taking care of. Now it says my design is out of the hoop area now it says needle is not position correctly. How do I get it to position correctly so I can finish my design, I'm up to the last triming to be completed.
Hello Sir thanks for everithing would you please helpme a changing color cam-double rail-steel is broken, Do you know how change that.
thanks
I recently embroidered some left front panel Richardson 112 caps. Now I can’t center my full panel caps on my driver. It keeps going back to my left panel. Any ideas to help me out?
My needle head is stuck in the up position. Have you ever dealt with that? It won’t bring the needle down to stitch.
Yoo quick question did you ever get the problem fix if so how I’m having the same problem
I am having troubles with my bobbin thread. My top thread is not catching my bobbin after doing a routine maintenance on my tc-series machine. I can't seem to find anything that'll. help me resolve this issue. I have an order that's due to be delivered today, I am freaking out. Can someone please help me?
I have the same issue and also don’t find any helpful videos out there, where you able to solve the issue?
Same issue. I can't find anything online about this.
Is it 1 needle or all needles? If all, it’s a bobbin housing issue, maybe the timing or the spacing in the housing.
hi dear,i have feiya chines machine 12 niddle,i have problem ,when break upper thread machine is not stop automatically
I keep tightening my tension on top and when I hit start the machine start doing it’s job but won’t stich
Your tips are just great! Thank you so much!
Hi there, how do I fix a no needle sign on the tc 1501?
Hi I have a Happy embroidery machine and it was working and it does not started ,I don't know what's wrong. Can you help me . Thanks
Thanks for all the information you gave it, really helped me.
i have issues error number 70 cant find 210pos ? how to fix it sir?
my machine single head 12001TC
I got a broken needle in my rotary and removing the finger board is difficult not enough space for the Philips skrew driver even the thin one any advice
You should have a funny tool with a Philips head one side and flat head the other - this is what you need to use to remove the plate.
I do not have a manual for my MT1501? I need to lower my presser foot to do my hats. How PLEASE??
Can u help me pls. I'm having problem MAIN MOTOR OVERTIME. If i start the machine the degree show 90 and the machine is not moving n show in the monitor Main motor overtime. What is the problem excatly? I chk needle 1 to 12 by manually all is ok.
I need help for color change time out
Did you ever get a fix to this? I have the same problem.
What about showing how to change the Led light bar please ???
Hlo sir my misen full prablam sir. Mission dealer not respond.....? Plz help me sir my prablam
Hi,
My Tajima is not powering up, please help,
Thank you
How to correct popping threads?
Thanks
I keep getting the message of "Hook error" Do you have a video to help? Thank you,
Hello was wondering if you can help I have a ricoma MT 1501 and I keep getting a 100 degree error I keep putting it on 100 and it keep saying it's need to be 100 degree I checked everything I don't know what else to do.
My need keeps breaking on my MT 1501 and I can't get past these tread breaks
Hi I have issue with two of my needles not engaging to start embroidery. Needle 3 and 4 doesnt engage (doesnt go down to start the embroidery) all the other needles work well. i have tried different things but nothing helps to get them work. Help appreciated here please
How did you resolve this problem? I'm having the same problem and can't figure out what to dp
@@keeshamcneil8276 I haven’t I have tried different things and nothing works. Its fustrating
You are so informative thank you
How Do You Install A Circuit Board
I have an issue with my MT1501. I suffered a jam and now the shaft and the motor doesn't turn. Have you ever seen anything like that? Axis is at 100 and it's on a needle. I'm thinking the motor died but no way to actually know. Reciprocator moves manually so it seems fine there.
Hello, thats happened to us a couple of times. Sometimes the machine is trying to protect itself by locking up. It could have detected an obstruction. We've had to manually rotate the needle bar, align the needles to get it back. Service should be able to walk you through it. If you get it to work, I would love to know your solution. Take care.
Good video Romero.
My MT-1501 did not come with a manual, where would I get one? Ricoma wants you to watch videos. I want to see something written down.
I got my manual from the Ricoma website. I think its also available on the Ricoma Facebook group under files.
You are always so helpful!
Ummmm, what owner's manual? I have a USB with a few basics but truly isn't as comprehensive as you are suggesting. I have a Ricoma 1501
Do you have a good digitizer you recommend ?
Best of the best:
www.vitordigitizing.net
I have an issue with my 1501 tc where the thread is not being trimmed when the machine goes for a trim it has caused issues because the machine goes on because the thread stay attached an starts to tug on the head which has caused some placement issues
Something is misaligned with your cutter. You have to clean out the knife housing, right above the bobbin housing area, make sure no thread or debris is there and do a cut command to make sure it’s cutting without any obstruction.
How to do a cut command ?
Haha, freak out is the first thing I do. I have a Ricoma EM1010 and it has NOT been a good ride since I got it. I’ve been with it a year and there’s always something. Right now I have a thread stuck in between that section where the bobbin goes and it’s too hard to pull out. I already removed the plate and looked in there and took all thread from there, but this one piece I can’t take out. Que hago?!?!?
Ok, yes, its happened to me too. You want to remove the needle plate and see whats holding it back. Most likely its tied in a knot somewhere. Get a good view and try to pull gently to untie the knot or the obstruction if possible.
@@RomeroThreads I did, and I took all the
thread out but there is one piece that's jammed in a place where I cannot reach. The thread is peaking out and I can grab it, but it's to tight in there and I can't pull it out, it breaks.
Ok, you have to find a way to pull it on the opposite side from where your pulling from. You might have use some long tweezers.
@@RomeroThreads Yes, that’s what I’ve been using. 😭😩
@@RomeroThreads I finally got it out. I had to find houses to remove the plastic from the entire arm and it came out easily by the other side. 😃
My embroidery machine wants to sew over the embroidery item so many times what can I do about this please.
I would check the design file. The embroidery machine stitches out what the file is telling it to stitch.
How can you undone a bobbin stick into a cap hat? I can’t take the cap off cause it seems tangled into to. I don’t want to pull and mess the machine up.
Hello, you have to remove the hat (slightly pull it off) then cut the thread. If its bird nested, with a large amount of thread and its stuck, you're going to have to cut the hat. and open up the top of the bobbin housing area and remove all the thread.
@@RomeroThreads did it and fixed it thank you. Sorry one more question, i was able to remove it without damaging the hat and i wanted to continue the thread once i backed it up to where the thread was missing it won't thread after i push start. any suggestions?
you have to push up the toggle switch and see the red light blinking, then hit start.
i have the em1010 i keep getting needle breaks on structured hats and cant figure out why
For needle breaks, I first make sure the hat is hooped correctly, then ensure I have the correct needle. Usually 75/11 sharp should be good, sometimes you need 80/12 sharp. If thats not the problem, i’ll double check the design make sure I don’t have any area too dense. There is no 1 answer, you have to move backwards and see where the problem is at.
@@RomeroThreads yeah thank you Im using titanium needles this has been my thorn i get a good run them boom.
I have a question. My trimming function is inconsistent. Sometimes is leaves no tail. Sometimes it does. Sometimes its short, sometimes its long. Ricoma MT1501
I also faced the same problem but by this video i resolved my problem I think this video will help you a lot.
👉 ruclips.net/video/OKAXkuBxG_Q/видео.html
Question: my cap driver continues to go off center when I frame...Help!
Very Helpful thank you 🙏
My machine knob won’t rotate, and it’s stuck on the 12 needle any suggestions please my manufacturer isn’t being helpful
?Sensory on embrodiary brother pe800. Having major issue with threading. Book is not helping
machine still runs even thread in broken,how to fix this
It keeps tripping the on off switch. Where can find the power fuse?
Sounds like your circuit breaker is tripping off. You need to see what other equipment is on that circuit breaker and make adjustments.
Jammed needles ?
Ricoma RCM-1501TC -7S; error machine not releasing pattern
Hello sir, my single head machine shows error 63 anyone Don't know what's the problem can you help me?
Where can I find a troubleshooting?
I also faced the same problem but by this video i resolved my problem I think this video will help you a lot.
👉 ruclips.net/video/OKAXkuBxG_Q/видео.html
Good tips thanks
I've noticed most videos with ricoma have isacord thread, is that the recommended thread?
That's the thread that comes w/ the machine. We like to use Madeira Polyneon Thread. Both work great.
I requested an owners manual. They said they don’t have one!
How to stop pop outs of my cotton out of the needle
Ricoma does not send a Manual with the machines they sell. At least the two 1501 machines I bought they did not send anything like that. I asked them for one and they told me thy don't come with them. Kinda hard referring to it if you don,t have one. If they made them for us owners it might save them a lot of phone calls from customers.
I got mine on their website and on the facebook group files page. You can probably email them or call too.
@@RomeroThreads That's good to know. Thank you.
@@RomeroThreads Hi , I'm very new at this and I am watching your video and its great. However, I would like to have the manuals, trouble shooting manuals and a better understanding of how it all works. Please can some help with a link to where these are on their website. THANK YOU!
I found it on line and printed it
I really need help, my machine is not sewing and the thread keep going down to the bobbin
Hello, sounds like a needle or bobbin issue. Make sure the needle is straight and facing the correct side. Make sure your bobbin area is completely clean, bobbin is turning in the correct clockwise rotation and check your thread path. Thanks.
Thank you!
👍🏾thanks
I need help my machine says “no needle error” but even if I move the knob it stays in 0 needles
How did you fixe this?
You need to turn the red knob that’s on the side of the needle plates it’s a round knob. Turn it slow until a needle number shows on the screen. You should be good to go when you see the needle number on the screen. This is the needle that happens to be over the hole that receives the needle in the bobbin. So depending on what needle happens to be over that hole, that is the needle that will display. This happens when the machine is not recognizing there is a needle over the needle hole above the bobbin. Should be a easy fix.
I have a ricoma 1010 embroidery machine.
Some of my threads keeps hooping instead
Love this video except for the compressed air. Engineers will tell you to never use compressed air because it can force dust or lint further in to the machine mechanics
Ive been using compressed air forever. Some techs have different advice. Its all a matter of preference but a small brush wont get those hard to reach corners. Thanks for the feedback.
I have a question, my ricoma machine keeps stop working everytime i push start it works for a couple of min than stops . What do i have to do?
Compressed air is fine to use if you actually know how to use it.
They recommend not using it because not everyone knows not to sit there and hold the trigger until freon starts coming out.
My machine won’t turn on?
With much respect, we should never use compressed air on our machines... It promotes rust deep within the machine, and forces lint and debris deeper than where it originally is.
Ive used compressed air forever, so has the local shops I visit. Never had any issues.
No manual
Thanks, but Ricoma support line SUCKS!!