HTML-код
- Опубликовано: 8 фев 2025
- In this video, I'm showing how to debug a digital camera, replace components and fault-finding.
Did this video help you? Support CameraRestore for more free content like this here:
www.buymeacoff... also consider subscribing and/or sharing with everyone.
If you need parts for your 6D have a look here: bit.ly/3zMyZLv
DISCLAIMER:
CameraRestore is not responsible for property damage or injury incurred as a result of the information contained in this video. CameraRestore recommends safe practices when working with power tools and electrical equipment, use of lubricants, liquids, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of CameraRestore, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not CameraRestore. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad
Superb content. Thanks
Glad you liked it!
Excellent!
Many thanks!
Great work!
Thank you! Cheers!
can the old model of the base board be replaced with a new model of the base board, with the replacement of dc/dc, please answer, thank you
@CameraRestore...i bought a used Canon 6D and the only thing that doesn't work is the Wi-Fi connection. The previous owner told me that it stop working during a slightly rain in his Iceland trip. Do you have any suggestion about that ? Like, i don't know, internal wi fi module, motherboard or what else. Thanks ... i appreciate your videos.
Hi thanks, the Wi-Fi module is placed underneath the top cover, you will need to open it up and check the condition. Might be oxidation trace.
@@CameraRestore last question please .... i think to remove the top cover it's needed to remove some rubbers around. How can I put back in place them, kind of glue, replace them or what ? I think you understand what i mean. Thank you very much
Hi, I have a question about a 5D mark 1, cf card pins where bent by previous owner, I have managed to get them back to the right place but getting CF card error when in, would it be better to just replace the reader or is there a way to test the connections are still good? Thanks
Best would be to replace the whole card pins, not an easy job on the 5D ii
Where can I get the canon camera parts for replacement of the broken ones?
Drop me a mail, check the info page for mail address.
I tried modifying a canon 6D camera by removing the LP1 & LP2 filters and replacing them with Astronomik clear glass. Put everything back together and the camera works, except the LCD screen is blank. It will take photos and videos and store to the SD card OK but just a blank screen (top LCD display OK). So I bought another cheap Canon 6D, checked it was working OK and repeated the modification and guess what - exactly the same issue - blank screen but the rest of the camera working correctly ??? Any ideas ????
This is really a weird one. Did you took the battery out while you open the cameras?
Did you check if the screen will show anything when shining a light on it?
I had a camera from Panasonic where the Backlight Fuse was blown, after replacing that the screen worked again.