Ford Fiesta Cabin Air Filter Replacement ( 2011 2012 2013 2014 2015 2016 2017 2018 2019 )
HTML-код
- Опубликовано: 24 мар 2023
- Website: undercarexperts.com/
eBay Store: www.ebay.com/usr/undercarexperts
The model shown in this video is a 2013 Ford Fiesta but installation is similar on the other models.
🛒 Visit our website: undercarexperts.com/
eBay Store: www.ebay.com/usr/undercarexperts
🔔 Subscribe to the UNDERCAR EXPERTS channel so that you don't miss the latest videos on car parts replacements ➜
If you're interested in our content, you can watch our other video tutorials:
📢 Find UNDERCAR EXPERTS on social media:
Instagram: / undercar_experts
Facebook: / undercarexperts
RUclips: / @undercarexperts
#undercarexperts #undercarexpertstutorial #undercarexpertstips
Buyer's Guide
Make Model Year(s)
Ford EcoSport 2018 - 2022
Ford Fiesta 2011 - 2019 - Авто/Мото
Find your parts today: www.undercarexperts.com
Thanks for the video.
Screw you Ford for putting those two screws up there. Just another example of engineers not thinking about maintenance.
I agree it is a poor design.
Find your parts today: www.undercarexperts.com
Designed by someone who knows they make enough money to never have to do it themselves!
I BET YOU PUT THEM BACK IN.
Thank you for the accurate video
thanks
Thx for the vid 👍
You bet
Find your parts today: www.undercarexperts.com
Nm finally got the sucker
That is great news!
Purchase your next filter at: undercarexperts.com/
Would this cause the car to stop blowing air completely?
Replaced fuse, relay, blend door actuator, blower motor resistor with car still not blowing air..hoping its not actually the blower motor itself as its a much bigger pain in the ass on fiestas being under driver side dash compared to most cars under glove compartment. Currently 90k miles, 2nd owner and dont think the cabin air filters ever been changed.
Thanks 👍
The cabin air filter should be changed once a year or ever 15,000 miles. This will help with air flow and putting less stress on your system when it is not impacted with debris.
Find your parts today: www.undercarexperts.com
I can't get to that last screw for the life of me
Is the screw not catching or stripped?
I can't reinstall the housing cover. What could be the cause?
Make sure to align the top of the housing first. It is also good to make sure that there are not any cables hanging down keeping it from fully closing. Once you have the housing fully aligned you should be able to install the screws.
Find your parts today: www.undercarexperts.com