Suspension problems with 2007-2014 Escalade: Replacing Z95 front struts in Cadillac, GMC, Chevy
HTML-код
- Опубликовано: 19 мар 2022
- In this video I share one of the top problems when buying a used 3rd generation 2007-2014 Cadillac Escalade, Chevrolet Tahoe, Suburban, GMC Yukon and Denali vehicles, and that is worn out, broken Z95 Magnetic Ride Control suspension. In this video I change out the magneride front struts in my 2010 Cadillac Escalade ESV Platinum. I did the unpopular fix and I put the OEM AC Delco struts back in to keep this riding like a Cadillac. As far as labor goes, it is a very easy job to do at home with some mechanical ability. The front struts can be bought on Amazon for a very decent price and I will leave the link down below! Make sure to double check your RPO codes to make sure you are buying the correct struts for your vehicle!
FOR Z95 MAGNETIC RIDE CONTROL OPTIONS:
ACDelco 580-435 Front Shock Absorber: amzn.to/3ujFmPM
(Will need 2- they fit both left and right front)
ACDelco 580-435 Shock(eBay): ebay.us/AC2nlL
Magnetic Ride Control Nut: amzn.to/3KXeqf3
FOR Z55 AUTORIDE OPTIONS:
ACDelco 580-433 Front Shock Absorber: amzn.to/3Ik808c
FOR NON Z95 and Z55 OPTIONS:
ACDelco 540-471 Premium Monotube Front Shock Absorber: amzn.to/36uhlNt
REPLACEMENT PARTS IF NEEDED:
Upper Strut Mount: amzn.to/3JsUwZ4
Lower shock mount nuts 11561429: amzn.to/3CTCxIY
GM Genuine Parts 15815519 Front Suspension Strut Nut: amzn.to/3JtuKUv
General Motors GM OEM Front Suspension-Strut Bolt 11610404: amzn.to/3JrDuL3
Filmed with:
GoPro Hero 9: amzn.to/3fhXgdQ
Neewer 660 Lighting: amzn.to/3bougA3
GoPro Mount: amzn.to/3ocP0Qr
Vanguard Tripod: amzn.to/3hldN3o
Amazon Links are associate links and I will receive a small portion of any sales 
Авто/Мото
![Roddy Ricch - 911 [Official Music Video]](http://i.ytimg.com/vi/5N3lAfydeWs/mqdefault.jpg)
Little trick.. Before you raise the truck off the ground, unbolt the strut (center nut) so that when you raise the truck, the suspension coil will expand and you wont have to pay someone to take the coil out... Put them back in, lower the vehicle and put the center nut on.
I'd like to see a video of that
@@nickmoore4923 Sounds a little dangerous...
Ill make a video as soon as I replace mine in the next couple weeks and show you
Following. Give us eBay links too
@@pyharpin what eBay links do you want
Dude thanks for the tip I’m about to do mine and will look at loosening the strut first…great video btw
Very well made video. Thanks for making it.
Thank you! If you need to order any parts check out the links in the description!
Going to do the front strut's in March.. Rear shocks worked out great!! Thanks for both videos!!
Awesome I am glad that the videos could help you out! If you order through my links that would really help out the channel!
@@streetriderscustoms I ordered the parts thru the link
Great Video! You sound like Ray Ramano narrating a car video! Its great!😁
Why does everyone say I sound like him???!
@@streetriderscustoms it's not a bad thing. Thanks for the great video
@streetriderscustoms It's not a bad thing at all because Everybody loves Raymond!😂😂
Ray romano, I love your video bud
Even my new ones don't work properly and in order to get credit for replacement, you have to have a dealer report showing its bad. My brother just replaced them with rancho and fool the sensor by taking the connector with magnet from old shock and just plug it back in. Glad your's worked the 1st time.Its a pain to remove shock from spring tower.
It's strange that you would get two new struts and they both wouldn't work. I don't think I have ever heard of that before. I know a lot of guys do the bypass the OEM but I wanted it to ride like it should this time around. Hope you get yours figured out
@@streetriderscustoms so now for all you Avalanche z55 guys ,I have a suspension code 6f2 and 7f2,very odd but if you search those codes belong to 2016 Cadillac escalades.go figure. So I ordered those springs and hope it solves leveling.plus I'm going to tear apart the old shock and show everyone the internals
I have a 13 cadillac escalade esv luxury rear wheels drive When I start move the truck I hear sound coming from the under carriage
Thanks for posting this. I have a 2013 ESV Platinum with 58,000 miles that I bought new and no modifications. I've developed a front end noise/drivers side when I back out and driving slowly over bumps. I can stand on the running board and bounce and get a terrible rub/squeak noise in the front drivers side. Could it be the shock? Doesn't do it on the passenger side.
Sounds like the noise that I had going on right before I changed my old ones out. If you can jack the car up and get both front wheels off the ground then you can check to see if one of them is locked up like I showed in the video. More than likely you need to replace the struts. Check out the links to buy them cheaper on amazon!
@@streetriderscustoms Thanks for the helpful information!
Did you have any issues with aligning the bottom bolts when reinstalling? I had a shop put on new springs and now doesn’t align up. I guess just put it in a vise and try to spin it till it aligns?
Sometimes they can be out of alignment when installing new ones, its easy enough to turn them to get the bolts in. Sometimes you need to put a center punch through one hole to get it aligned and then you can get the other bolt in
I have the Magnetic ride on my 2008 platinum Escalade but mine doesn’t have those connectors on the top of the strut where you unplugged in the video, I can’t find an answer anywhere but is that normal for this older model? I have the z95 as well with air shocks in the back
The 2008 models are supposedly different because it was the first year they started doing the upgraded shocks. To really figure out what you have you need to look in your glovebox and look at the RPO code list and find the code listed for your suspension option
Geat video! Just curious the Z95 and Z55 difference as well as strut and shock. There are also similar thing like EBJ 580-435 as what your showed . No idea should chose that, since those from your link are unavailable.
You need to buy the shocks and struts that your vehicle came with. If you look in the glove box you will see a list of all the codes of how your car is built. You will see either a 'Z95' code or a 'Z55' code and that determines what shocks and struts you need. Let me know if you need any more help, I also looked at my links and everything was available on amazon
@@streetriderscustoms Thanks and sorry confusing, the link as ACDelco 580-435 and 580-433 showed either currently unavaiable or temporarily outof stock from my logging account. ACDelco 580435 may find out in Ebay anyway. AWS advised EBJ 580-435 *1 $238, ARSTAK *1 $345,Blrack *1339 LUFT MEISTER *2 $339. Totally lost my mind. And some suggest better to replace Rear absorber firstly, I wondering why front struts not affected bigger when driver seat amounted in front.
Awesome video. I hve a 2011 Escalade. I’m trying to decide between the Arnott ($372) from O’Reilly (Magnaride) or ACDelco ($366) from Amazon. There’s about a month wait time for the Amazon. Is there any significant difference?
People say the Arnott and the Acdelco is very close. I have had friends who used Arnott and had nothing but issues. Personally I always buy ACdelco, there is nothing better than OEM
@@streetriderscustoms thanks,took ur advice, went with the ACDelco, 2week wait.
Have u done any video about coolant system flush? I couldn’t find anything specific to the Escalade. (Any recommendations)
@@RasTona_ I have not made a video for the cooling system. Probably should get a flush with 200K+ miles on it. I hope the AC Delco shocks work out for you, any questions just let me know
@@streetriderscustoms Thanks, I'll definitely reach out. I'll let u know how the flush goes.
You can buy them completely ready to go in or just buy the conversion kit
You can not buy the z95 or z55 struts complete. The regular ones you can buy complete.
Was close to getting the strut master conversion kit for my 2009 Escalade. I held off to do further research. Not sure which route to take. My front struts need to be replaced asap
Use the links in the description and buy the correct OEM from Amazon. Don't cheap out, you want it to ride like it's supposed to. You get what you pay for
I ended up going with OEM front struts as per my mechanics recommendation as well. it drives like an absolute dream right now. Very noticeable difference. Glad I went OEM even if I had to pay more.. got an alignment next week. @@streetriderscustoms
@@Anthony-ns8ef where did u end up buying the z95?
@@RasTona_you can buy the z95 struts on Amazon at this link amzn.to/3ujFmPM
Can you tell me how I can get a replacement connector that go on top of the strut?
Best bet would be to find one being parted out and cut it off the donor car
I been looking for new struts the biggest problem I am having is finding the right ones with 22 in wheels I do have Z95 suspention
Follow the link for the Z95 struts. I have 22" wheels and Z95 and that's what I did in the video
Thanks
@@streetriderscustoms what link?
@@gregskipper the links are in the description so you can order the parts right from Amazon
Other than the noise how did you know it was the shocks/struts? Did it have a sway/bounce so bad that if felt like you could loose control of the vehicle?
When these shocks get worn and need replaced, it will drive like a dump truck. If the ride is really harsh that would be the biggest giveaway that the shocks are bad
I replaced the same front struts, but my truck drives like shit, tire unblances on bumps and i could feel steering might move or truck may drift, i even changed bushing and stabilizers links
It could be your tie rods or ball joints. Basically anything in the front suspension or steering.
@@streetriderscustoms its painful to figure out, I took truck twice to good year and cadillac and they tell me nothing is wrong with the suspension, i replaced inner and outer tie rods as well, except control arms, i do not want to keep spending money while no one can confirm what is wrong, i replaced all rear suspension including control arms stablizer links shocks air compressor
Where did you buy the struts from?
I did original z95 on the front, and air ride original on the back. It rides better but still I have a lot of shaking and vibrations in a body. I don't know what causing it. Some guys suggested ESCM RESET. I TRIED MULTIPLE SCANNERS not working, need original tech2 from gm. Unfortunately that is 2 k. My driver side of a truck is 2 higher than left side. This truck is too complicated, I own it for about a year still have 3 years of payments, and it keeps eating my family budget. It's not worth it, any 4 runner, Highlander or sequoia is way better.
These vehicles are not too complicated. A good technician should be able to find your issue. Also you need to remember that none of the cars you listed are luxury cars. Luxury vehicles come with added repair costs and something to think about when buying an older luxury car that has miles on it. You could just buy a Yukon or a Tahoe and it would be comparable to those Toyotas you listed. Or you could swap in the non Z95 shocks in your Escalade....
What kind of suspension has this model? Air , magnetic or normal
This escalade has the Z95 suspension, so it has the magnetic ride control
You my Ninja 🥷🏾
Hope I could help with your project. Thanks for watching!
i waited for the end of the video for the link and i do not see it on my end, can you text me the link please
The links are in the description. Click down below the video and you will see the Amazon links to follow
Gm does sell them as a complete assembly
Not the complete Z95 magnetic struts
Well with my system it uses the z55 suspension and after 20000 miles they appear to have failed. My brother believes that their only good for 15K mi. Sad we don't have better engineers who will stop creating engineered failures.
Yes, most people do complain that these struts do not last as long as they should. Its unfortunate because putting in regular struts is like having a Suburban instead of a Cadillac
What’s the part number for z55 front struts
The part numbers and links are in the description
What do I do about the rear?
Here's the video I just did about the rear suspension... ruclips.net/video/MibjtPrqiUQ/видео.html
Just get the z55 delete kit! I converted it and it comes with resistors to delete the error code
This wasn't that expensive and I am very happy with the way it rides.
Why? It's a Cadillac. Yours doesn't ride anywhere near as good now
Post a link
Buy the shocks from O'Reilly's with Military/Veteran discount and get a life-time warranty on the shocks.
What brand did u go with? I couldn’t find AC Delco. Just arnauts
There are AC Delcos available on amazon. Follow the link in the description for the parts
@@streetriderscustoms Update: , So..ordered the pair on Amazon.($732). It was supposed to be delivered yesterday, 3weeks wait, didn’t happen, tracking # is useless. Apparently the seller (Metro 24 Wholesale Inc) is pretty famous for stiffing customers. I should hve read the customer reviews. I hope you’re not associated with this business.
I should have taken ur advice a month ago. Better late than never….so thanks.
Hi friend I'm looking for Headlights Scalade ,Ill need 2 side , Do you have to sell ?
Sorry but I do not have any escalade headlights for sale
The part I wanted to see is what you sent out. Ugh!
I know I'm sorry. My buddy took them over night and swapped them out so I could t get any videos of it.
Z55 delete kit
Just buy whatever shocks you want for a delete
Cadillac Escalade Ballast Completely Eliminated, Watch. This RUclips Video Is On Google.
Sorry, not much helping
Sorry it didn't help you
Use oem struts. It's a 80,000 dollar truck why put bs parts on it
All the struts I used on the video are OEM
@@streetriderscustoms said amazon lol my bad
@@jodyjohnstein I bought the OEM parts from Amazon. Which is the cheapest place to buy them And is a fraction what a shop or a dealer would charge
@streetriderscustoms I've never seen legit oem products on Amazon so this is good news for me because I'll be buying an escalade soon and I'm not paying anyone to fix anything on it