This Will Break on Every Toyota Tundra / Antenna Ornament Base Grommet Bezel
HTML-код
- Опубликовано: 26 апр 2020
- Anina Antenna Ornament for 2014 2015 2016 2017 2018 2019 2020 Toyota Tundra Radio Antenna Base Bezel Mounted 86392-0C030 amzn.to/3nIcRsr
GENUINE TOYOTA 2014 - 2015 TUNDRA ANTENNA BEZEL BASE ORNAMENT OEM 86392-0C030
amzn.to/2ViHHsr
TOYOTA 86300-0C090 Antenna Assembly with Holder
amzn.to/2yIqEsA
Antenna Ornament Base Grommet Bezel - For 07-13 Toyota Tundra Truck Accessories - Mount Radio Mast Replaces OEM Replacement Parts 86392-0C040 -
amzn.to/34pWhma
TOYOTA 2000-2006 TUNDRA ANTENNA ORNAMENT 86392-0C010
amzn.to/3c5iJ6P
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
This Song was Downloaded Here www.epidemicsound.com/referra...
Royalty Free Music Provided By Epidemicsound
Tools used
Video Recorded With
4k Hd Camera Panasonic g7 amzn.to/2CQ9h9M
4k Hd Vlog Camera Sony RX100 Vii amzn.to/2Hv1oHe
1080p Action Camera Hero 7 Black amzn.to/33g0PJz
EDUTIGE ETM-001 Microphone amzn.to/2OV9P2V
MagiDeal Black Fur Microphone Windscreen amzn.to/2s5tpQY
Rode VideoMicro Compact On-Camera Microphone amzn.to/2ronlmD
COOSA USB-C Power Bank 5000mAh Portable Charger and Wall Charger amzn.to/2qTypI3
USB C to USB C Cable 6FT amzn.to/31Tdguj
Canon PowerShot G7X Mark III Screen Protector amzn.to/2MRo8EL
Filter Adapter amzn.to/2pozneX
Triple Cold Shoe Mount Gimbal Extension Bracket
amzn.to/2pmqySH
Manfrotto PIXI Mini Tripod amzn.to/2pWz3nAThanks
Thanks For Watching and Please Subscribe ruclips.net/user/subscription_c...
Facebook: / thelatemodeltech
InstaGram: / thelatemodeltech2.0
Pinterest: / thelatemodeltech
Twitter: / late_tech
________________________
DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing value to you!
For sponsorship, product reviews, and collaboration, you can email me here:thelatemodeltech@gmail.com
________________________
#TheLateModelTech #toyota #tundra 
Авто/Мото
Thanks so much for the video. I just installed a 7 inch antenna with this as a guide. It is much easier installing the rubber grommet when the antenna bracket has been removed as shown. I had to carefully pry the inner sections of the grommet that hold it in place in order for it to lay flush with the body but once that was done it was easy to get it all back together. I didn't use the same wrench to remove/reinstall the bracket but my ratchet with a 10 inch extender worked perfectly.
Wow, just what I needed!! I have a 2007 Tundra and my antenna grommet has completely disintegrated!!!
Thanks. Ordered the piece through your link. Easy to replace. Only 3 plastic clips removed and 1 bolt. Used a screwdriver with extension to unscrew bolt. 2014 Tundra. Just dropped a 9mm socket and left it at the bottom. Tried to fish it out but it took longer than replacing the base so I left it there.
Thank you so much for the info, it was a snap with your video tundra💪
Compliments on the video. Direct and to the point, as all instructionals should be. I’m replacing the antenna base (grommet) on my ‘16 Tundra Platinum and was looking for professional guidance and direction. Many thanks.
Perfect video for what I needed, thank you!
Great video, straight to the point and I’ll link this to my Amazon review for the antenna boot!
Thank you, Donny. I used this video as a template to install a new bezel and re-adjust the height of the antenna base on my 2012 Toyota Sienna. Before that, I extracted a broken antenna piece stuck in the base after having watched your video about how to do that using reverse/left-hand drill bits and a center punch. Excellent how-to-videos like yours are the reason I love being a student at "RUclips University." 1000 blessing to you and yours.
Best comment of the month, thanks for sharing!
Thanks Donny. I just snagged a 2008 Tundra so I will be watching.
Great video bro, this just happened to my tundra, definitely helps switching it out, thanks.
Worked like a charm. Thank you!
Great demonstration. I will tackle this project myself. Thanks
You made it a lot easier and faster for me. Thanks!
Man..!!! You made my day with this video!
Very detailed! Thanks for sharing!
Door an door ,trim tools work great for getting those fender deals out ,im watching this because i broke mine trying to put aftermarket antenna on ,an it smashed the rubber, so good video because it just saved me 15 20 minutes.
Thanks for the great instruction . It took me about an hour to make this repair. Everything went smoothly.
Thanks! Made the repair on my 2015 much easier!
Thank you for saving me a lot of time!
That was Excellent 👌🏻 Thank You 👍🏼
Dude, thank you for making this video
Great video and its so true about the antenna and the drip seal. I do my best to not go through automatic car washes.
Thanks for your help!! Worked just as you said
Just what I needed! Thanks for making this video. Wishing I didn't have these Bushwacker fenders right about now!!! SMDH FML =]
Sweet saved me a ton thanks!
Thanks a million for this. Very cool.
Thanks for the video...just changed the base out on my wife's '14 CM...10 minutes and done!
Thank you... your videos are an asset
Awesome sauce thank you brother
Thanks man!
Thanks for the Video, New news too me!!
Thanks for the great video as I had no idea how I was going to change mine! The only problem I may have is that I have fender flares installed that I will probably have to un-bolt. Thanks again!!
Thank you! Easy with your help.
This helped a ton - THANK YOU!!
Most welcome Scott!
Thanks👍 I need to do that to my 2007 tundra.
Mine just peeled off on the 5th gen 4runner... Another in the mail. Thx!
Thank you. 👍
WOW, TY VERY MUCH
Thank you for the great instructional video did mines took a while to take off the plastic grommets,but once off it's easy. Thanks 👍
👍
Looks easy trying to save $$$ mine dry rotted from weather thanks
I just laughed when you said the only faults and YESSSSS that is 100% correct. Those are the ONLY two things my 2017 Tundra has had fail. Good job. Video was a little dark at first but improved as you progressed..
Just did this thanks for showing was a slice a cake 🎉
You’re welcome 😊
Nice to know how to put the rubber on easier. Ty. Was looking for the part #?
Cool thank you.
Just completed this with your guidance. Thanks.
Excellent!
Thank you! Video was very helpful.
Glad it was helpful!
Thanks for the video, very helpful, mine just parted itself out. True also for the reminder on the mast, I'm going to stick with the touch free car wash my antenna mast has made it to 15 years and 165k miles without snapping off.
Thanks mine broke on a 08 i dropped it in and had to see how to get inside your video helped TUNDRA4LIF3!!!!!
Thanks for the video! Door lock actuators also seem to be an issue.
Eres la pura vena, primo😎😎😎
Thnx bro good job
Thank you sir. Appreciate your videos on this gen. Tundra
No problem 👍
My 2015 Toyota Tundra Limited’s Grommet crumbled. No need to do anything but take antenna off, cleaner wax the area and pop the new grommet back on! 20 second fix!
Hell yeah video is perfect...thank you
🤘
This was very educational! I just replaced mine and was wondering why it wasnt fitting flush to the truck, now I know! Any videos on how to replace all that rubber all around the outside of the back window? Mine is shot!
Thanks bro
Thanks for the video. Just went through the process of replacing the headlight bulb...................................taking the whole front grille off, maybe this will seem a bit easier but they sure don't make anything too easy.
Well I just got through replacing the grommet and I guess this is one of those rare instances where neglect made something easier. The grommet was so deteriorated that it just completely fell apart on its on so I just screwed the antenna off, slipped the grommet on, screwed the antenna back on and..................presto, chango, it's a done deal.
Nice video
I was wondering what to do if during broken antenna extraction, I messed up the inlet where the antenna screws in... thank you
Thank you.
Welcome!
THANK YOU HOMIE!!!!
Welcome HOMIE!
Awesome man you gotta do one for the drip molding replacement
Lol. My drip molding is just glued down .
Yep, this broke on mine funny thing is the radio worked just fine without it. I have a 24 Tundra now and they fixed that antenna issue.
Got any advice for the 1st gen Tundra a 04-05 Antenna base replacement? Can't find the part number. Thanks👍
I have a 5th Gen 4 runner. I’m assuming this is done the same way? I tried installing the ornament over the antenna but it’s nearly impossible. Thanks!
Great clip, mines got damaged from car wash too.
2016 tundra car wash antenna victim. Si i replaced the antenna mast, but it doesn't tighten down all the way. It spins.
Looks like i might be able to tighten that nut underneath?
Any thoughts?? Thanks,
Im hoping to mot have to replace the whole antenna wire.
Did you do a base replacement video?
Thanks
🍻
I don't know how many of these you have done but I just remove the antenna mast and the old rubber boot. I slide the new rubber boot over the antenna base and into the hole in the fender, install the antenna mast and done. I haven't found the need to mess with the inner fender panel and unbolt the antenna base.
O Doyle rules. Probably 103
That part is good Donny, but I am replacing the entire antenna, and as with your video and others, it doesn't show replacing it through to where the new antenna clips in past the firewall in the car. i see everything you did, but am still confused where to pull the inside apart to clip in the new antenna. My grommet is still in excellent shape even after many years. The truck is a 2007 Tundra Limited and I might add new condition. Just the radio receives zero signals. If you get a chance make one on the entire replacement. Thanks.
Thanks and great video friend ….. yep, watching this as a car wash just broke my antenna ….. so I’m trying to learn how to extract the threaded base to replace with new.
Mine broke on my 2015 Tundra in a car wash recently. I didn't know this was a thing, otherwise I would've removed my antenna each time. We didn't replace the antenna for a few weeks. In that time, the remaining thread inside there worked its way back out, enough I could get my finger nails on it to unscrew it. Luckily we didn't have to go through the steps to remove that. Well when my husband put the new antenna on it, we discovered the rubber bezel was split in several places. I just ordered the part! It's on backorder with Toyota btw with no ETA as of 8/30/21. Amazon had it for $12.99 after tax though!
@@toshasmith7260 I just received my reimbursement check from the car wash company!
I haven’t paid attention to any disclosures at the car wash I use currently, but with other ones I have read on their signage they are not responsible for damage to your vehicle. Something to look into though, but too much time may have passed for me.
@@toshasmith7260 mine just issued me a check for $225., and I’m grateful for a reasonable and responsible car-wash chain. I wasn’t expecting them to do anything, so I was pleasantly surprised!!
How do you get the broken piece out?
Do you have a video replacing the antenna base with running the wire from the stereo bread unit?
sorry no
Just another reason to never use a drive through car wash. Hand wash only.
There's a trim tool to remove the splash guard trim pieces. Very cheap on Shamazon.
What's that tool called
Noticed mine was cracked a couple days ago. Sucks that 5 years into the truck and I have to replace this. Poor design. To be fair, the Florida sun kills everything. Anyway, still love my Tundra and thanks for the video, it really helped.
Same problem here as well. Pretty much everything mentioned at the start of the video.
Thank you. You just saved me some exploratory surgery on my truck!!
Most welcome, also take a look at this ruclips.net/video/czE-BHSW-Y8/видео.html
R/R mine awhile ago. The only place who had the part was Toyota@ $30.00.
I am new to your channel. Subbed! Do you have a video for the replacement of the door lock actuators on the Tundra? Looked through your vids and did not see one.
Sorry
@@Donnythelatemodeltech Feel free to post one, I would love to see you do it so professionally, before an "amateur" attempts the job.
Where did you purchase the wrench set you used in this video? Thanks for posting as my antenna base just fell off my truck. 2014 Tundra.
amzn.to/3RoxkPG
@@Donnythelatemodeltech Thank you for quick response. Keep up the great work teaching those of us who are trying to learn.
Slap some painters tape around the whole area before you start. Save the hassle of any paint scratches.
thanks for the video.. does anyone know the name of the wrench he's using or where to find them?
This is the set. amzn.to/3aaDuzG
@@Donnythelatemodeltech Awesome!! Thank you
What size speed wrench? Is it metric? Also video was hard to see under wheel well.. unless camera phone was under, contrasts of light was a factor. Regardless good instructional video.
10mm
Is there a video for broken antena with part still stuck in?
Yes How to Fix Your Trucks Broke Off Antenna / Carwash Snapped off My Toyota Tundra Antenna Mast
ruclips.net/video/czE-BHSW-Y8/видео.html
I have a 2015 Tundra and my antenna broke off. The screw is half broke I side and I have tried to tap it buy no luck. Any suggestions? TIA
Left hand Drilled bit. I replace alot of bases due to corrosion not allowing the broken part to turn...
My antenna snapped at the base. Can you do a video on how to just remove the broke screw part of the antenna?
I can . It might be a little waiting.
Same thing happened to me yesterday, would love to see that b
Why did I do all that just to pop it on the top? I did it the way you did it but damn what a pain in the ass
where do I get the metal part for the antenna? I have the bezel, but I can't find that metal part that you actually screw the antenna into.
I can get the part number for you tomorrow.
The Late Model Tech heck ya bro! That would be greatly appreciated:)
@@MistaPookie1 amzn.to/2yIqEsA
@@MistaPookie1 TOYOTA 86300-0C090 Antenna Assembly
The Late Model Tech thank you bro I appreciate the help! :)
is there a video for the broken antenna? I did not find one on the channel
I'm about to film it.
@@Donnythelatemodeltech Awesome! Thumbs up on the first video, and a subscribe! My antenna snapped off in a carwash and I have been streaming ever since. I need to fix that sucker! I got the new grommet and a 6" mast antenna to replace it but it looks like there is a part of the old antenna stuck in there, or I just need to replace that whole piece. I was hoping not to have to mess with the wire through the firewall.
@@Anonymike365 lost it in the car was too, finally getting around to fixing. Not going to replace the antenna base ,but show how to get the broken stuck part out, I'll try to have it up soon , thanks!
Easier than replacing head lights 😂
Do people still listen to rhe radio? Mine broke off and I don't have any reason to fix it
Went through the car wash for the first time and here I am! 🤦🏼♂️
Oh ,my antenna is broken in the base, forgot to take it off allso.... video coming soon
Does this also work for the 5th gen 4 runner? #TheLateModelTech
Almost, the 4runners fender flares make the job more difficult, not sure if the parts numbers are the same. But, the technique is the same.
@@Donnythelatemodeltech Thanks a lot! Yeah I wasn't sure if i had to reach from under the hood or the way you are showing.
@@Donnythelatemodeltech Coming back to this subject: In my 4runner there are 2 lines of fasteners for that plastic liner. There are some Philips screws on the outer side and then the flares on the inside (closer to the engine). Do I need to remove both sides to be able to access the antenna? I was hoping to get away with only the Phillips screws, but from your previous post it sounds that I definitely have to remove the flares. Is that right? Thanks again for the help.There is no video out there for 4runners....
I actually just did this on a 4runner last week, not fun. Don't remove the flare, just take out enough hardware towards the door ,"half the Philip's screws and plastic inserts,lol" I just peeled the wheel liner back enough to get my hand in there, I did have the wheel off also. Lots of bad words also.... lol. Its just one 10 millimeter up there.
Cleaver title
Add more lighting next time. Hard to see
Both of these has happened all at once broke antenna at car wash and the rubber piece has ripped off
2008 tundra 350,000 miles orginal antenna never had this problem.
Was going to say the same thing. Mine only has 145k tho.
Did you ever service your transmission fluid?
You didn't replace the base.
Oh man ,scratches are character 😂, i take mine off road ,not like rock crawling, but it's got character, it's 2014 , an my wife was like 🤨 an i was like listen this is a TOYOTA TRUCK , not for shoe shopping, people complain about tundra not having all that tech ,guess what ,that antenna rubber, is what we deal with 😂, while there replacing trans ,an other stuff ,poor Toyota guys having to replace stupid rubber 😉