Hey Bro, I love the mods you do bro, one day, when I get my FG, I’m doing this to my car. Your the best bro. Best wishes to everything you do, and I’m gonna continue watching your vids forever!! Nice job brother 😅💯💯
12:45 Zac...that other hole you were "wondering" about, is the actual hole it should be going through 😂the end of the rod should be bent at about 70 degrees, and once you tighten it down the tension means it cant come out.
Loved the video ZacBaldy. I always love your videos. Can’t wait for the next video. I will be purchasing more merchandise in the not to distant future. From Jordan’s car reviews.
Move that battery clamp to the middle dude. ive used thode ones before doesnt matter how tight you clamp them down the battery still will want to slide. Given that theres bit of play on the bottom of your battery that it could slide. I know you cant budge it now but it will get loose and youll be using that fire extinguisher again.
you can sand down the LED tip, 1. to soften/disperse the light and 2. so it's not as long and you can push it all the way to the LED edge until it stops on the trim
Bro, please insulate the bracket if you are not going to move it to the middle hole. Remember that once you tighten it down it won’t slip out if you put the hook part facing toward the front. But if you don’t want to move it please insulate it. Even if you just cut an old bike tyre inner tube and slipped it over the top cross bar on the battery, it’s better than if the battery slips and earths out. Good luck buddy.
Thanks mate!! Yeah I think personally I’m going to try bend the rods and centralise the bracket. I might even try to get a battery that I can lay on the side and use one of them. Would make it a wholeee lot safer
So you call brands who gives this shit from the factory a ricer company? There is nothing rice about it, know what's rice? Underglow crap and rgb footwell lights...
Im suprised that you dont just put the battery in a battery box when relocating, thats what they are made for. Have you ever seen a car that has been shorting out and you cant disconnect it from the power it will burn to the ground..........
Ok Byfrenzy replied and I had no idea that the boot mount battery was stock. Sorry for big mouthing but I do recommend insulation for the terminals as much as you can aye. 😉
You are begging for a car fire with that battery mount. It's not a matter of if, but a matter of when.
Hey Bro, I love the mods you do bro, one day, when I get my FG, I’m doing this to my car. Your the best bro. Best wishes to everything you do, and I’m gonna continue watching your vids forever!! Nice job brother 😅💯💯
Thankyou so much legend ✌️❤️
12:45 Zac...that other hole you were "wondering" about, is the actual hole it should be going through 😂the end of the rod should be bent at about 70 degrees, and once you tighten it down the tension means it cant come out.
Hahaha yeah I thought that from how off the one I bought was😂 the one I had worked but yeah I might try bend them so it’s not as close to the positive
Which window wires did you splice into? Ive got a FG and did my exterior door handle lights, and am wanting to do the interior now
Loved the video ZacBaldy. I always love your videos. Can’t wait for the next video. I will be purchasing more merchandise in the not to distant future. From Jordan’s car reviews.
Move that battery clamp to the middle dude.
ive used thode ones before doesnt matter how tight you clamp them down the battery still will want to slide. Given that theres bit of play on the bottom of your battery that it could slide.
I know you cant budge it now but it will get loose and youll be using that fire extinguisher again.
Yeah the door lights look mint on your falcon mate.
Bro use the centre Hole on your battery stay. If you have to bend the right angle a bit more.
you can sand down the LED tip, 1. to soften/disperse the light and 2. so it's not as long and you can push it all the way to the LED edge until it stops on the trim
I didn’t even think of this!!!! Broooo great idea! I might do that!
Bro, please insulate the bracket if you are not going to move it to the middle hole. Remember that once you tighten it down it won’t slip out if you put the hook part facing toward the front. But if you don’t want to move it please insulate it. Even if you just cut an old bike tyre inner tube and slipped it over the top cross bar on the battery, it’s better than if the battery slips and earths out. Good luck buddy.
Thanks mate!! Yeah I think personally I’m going to try bend the rods and centralise the bracket. I might even try to get a battery that I can lay on the side and use one of them. Would make it a wholeee lot safer
no one notices the effort you put in behind the scenes, your work rate is insane, i’ll never understand how you pump out an upload a day
Till 3:40 bla bla bla
Thanks lol
If you sand the LED, it will diffuse the light better
could put some insulation between the positive and battery stay, like electrical tape or big heat strink
Positive should have a boot on it anyway.
Yeah I think I might try bend the rods and move it to the factory location
ZacBaldy “factory” locations 😂 when nothing is factory. But battery stay must be ;)
BoosterKings 😂😂😂😂 well I mean it’s better than it jumping around on the highway😂
ZacBaldy 😂😂😂 oath it’s is haha
awesome vid mate, love your content, your a legend
More LED's for your car, when are you doing Lukes? Keep to your word Zac
Was bout to comment the same thing haha don’t dog the boys Zac
Losing respect for him over this
Hahahahaha I will do eventually! I’m busy af currently 😂
You better
What 12 volt wire did you use and dose the light stay on all the time
Use the wires from the window switch for the light and it stays on when the lights go on.
Love The Blue Lights, Super Sick :)
I like how every r33 gtst the rear mount battery is in a different place, but It don’t matter
its in exactly the stock position on an r33 coupe?
Or held in by zipties 😂
i love to do thatbwan i buy my own car i think is nice
What wire did you tap it into?
A 12v wire lmao
Bro sorry i think that's a bit ricer shit bit I love the car itself
So you call brands who gives this shit from the factory a ricer company? There is nothing rice about it, know what's rice? Underglow crap and rgb footwell lights...
Hey Zac, if you don't want it to be as bright, you can use a higher value resistor
For leds an easy way to remember is "cut cat" (cathode). If the legs are already cut, the flat spot is negative because something is taken away.
What's happening with the B series?
I can’t get it due to the covid Restrictions 😢
@@ZacBaldy :(
there is a little red rubber cover on the positive terminal at least it looks like there is one chuck that over it for peace of mind
Race the skyline and not the falcon because if you work it right you have a track day car and a daily driver
a daily driver with 600hp ?! that’d be a waste of a car
Then whats the BA XR6 he just got for?
WILDEST eh what do I know I’m a 4WD man
TaffPlays :P
Im suprised that you dont just put the battery in a battery box when relocating, thats what they are made for. Have you ever seen a car that has been shorting out and you cant disconnect it from the power it will burn to the ground..........
That’s the stock position big fella
Ok Byfrenzy replied and I had no idea that the boot mount battery was stock. Sorry for big mouthing but I do recommend insulation for the terminals as much as you can aye. 😉
Awesome man
cars gonna come out fckn mint bro
Good vid bro keep it up
@@zlorpp5553 ??
PUPPYYYYYYYY
Nice
Nice vid, but that battery scares me.
Day three of asking for Zac baldy grass
😂
😂😂😂