All of the atachments are super cool. But the mix bucket that has the trap on the bottom to pour the material into the wheelbarrel for me is the coolest
thats awesome. I am about to re design my bruder, with metal boom screws etc........ for me getting thst bucket mechanism to tilt back when down, and dump when at full height is really tricky. I feel like i need to re design the geometry on it to get it right. Great video. i love the 906.
well i did some improvements last night, thanks very much for doing this video. It gave me the motivation to do the changes, now my conversion is already way better. not 100% but way way better. i am pumped on it!! last comment i promise lol
i have been watching this video every day lol, i cant wait to see it in action. id love to see it dumping into one of your cab over trucks. Or some heavy forestry work would be cool. Or some work with your red train. saw a cool real life pic of that once the train had dumping buckets on it. i bet you could do a cool video like that, hauling rock in a train with the 906 :)
@@BartsteRCModels thats too cool!! i cant wait to get some time to tinker with mine, and fix up that bucket assembly! but if you do a video with them both, that would be super awesome. fingers crossed :)
Great model. Had that before too. Back then it was quite simple with a servo and rope. Does the metal undercarriage exist somewhere or is it self-made? And where are the tires from? 
Sweet, I have the same exact bruder model but haven't done anything with it yet. Do you have the build video? I need ideas on how to go about it for mine, lol 😂
Open tx... Speed crontol instead of position control. The servo move slowly and keep the position when you go back to neutral, like an hydraulic steering. Much better for a loader, more realistic in control and the loader didn't "dance" whan you try to keep a position on steering when you unload your bucket.
Gibt es eine Anleitung wie man den baut? Um die Funktionen für für die Schaufel etc zu haben hast du das mit einem Stecker gelöst oder mit einem integrierten schnellwechseler?
@@BartsteRCModels d’accord Ça marche et après côté télécommande et l’émetteur récepteurs tu me conseillerais quoi 🙂 Car j’ai trop envie de faire le miens aussi ça a l’air trop cool😇🤩🤩🤩
You never cease to amaze us ... that's a 10 in 1 one little multi purpose wheel loader :) I love it
All of the atachments are super cool. But the mix bucket that has the trap on the bottom to pour the material into the wheelbarrel for me is the coolest
Can’t wait to see what kind of attachments for you to make for that. You always make great stuff. Great job.
C'est une entreprise qui prospère, les équipements sont top...
You are the Best !!!!
thats awesome. I am about to re design my bruder, with metal boom screws etc........ for me getting thst bucket mechanism to tilt back when down, and dump when at full height is really tricky. I feel like i need to re design the geometry on it to get it right. Great video. i love the 906.
Comme d'habitude encore une réalisation extraordinnaire, Merci :)
Absolutely amazing. I really like all the attachments.
Cool Bartste Rc Models Spielspass für alle da draußen auf RUclips
that's a sweet machine thx for the post.😊😊👍👍🚜🚜🚜🚜🚜
Coole und schöne Modelle von Bartste Rc Models Modellbau
well i did some improvements last night, thanks very much for doing this video. It gave me the motivation to do the changes, now my conversion is already way better. not 100% but way way better. i am pumped on it!! last comment i promise lol
i have been watching this video every day lol, i cant wait to see it in action. id love to see it dumping into one of your cab over trucks. Or some heavy forestry work would be cool. Or some work with your red train. saw a cool real life pic of that once the train had dumping buckets on it. i bet you could do a cool video like that, hauling rock in a train with the 906 :)
I have new train and new wagon. The loader have been tested for load balast in the wagon...
@@BartsteRCModels thats too cool!! i cant wait to get some time to tinker with mine, and fix up that bucket assembly! but if you do a video with them both, that would be super awesome. fingers crossed :)
Very nice job, I see you build all the frnt end of metal, did you use a reduction motor for each wheel?
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
Yes 4 N30 motor for all 4 wheels.
Thanks for reply one more question how many RPMS are the N30 ?@@BartsteRCModels
@@carloshnunez 65rpm 6v
@@BartsteRCModels Thank you
Such a cool machine - you are a wizzard Barste 👌
Franchement du bon travail, c'est limite une de mes chargeuses préfèré au niveau de la marque CAT !😂
Incredible !! 👏🏻👍🏼
Nice video and model 😁👍
It looks so Good 👍👌🇸🇪
So good ii boss 👍👍😊😊
Great model. Had that before too. Back then it was quite simple with a servo and rope. Does the metal undercarriage exist somewhere or is it self-made? And where are the tires from?

Undercarriage come from Hell-tec modelbau, link in video description. Tire come from WPL (hard) wheels come from Magom HRC
Excellent as always.
Do you have a mini concrete mixer? In a few months Bruder will make one 🔥
I'm waiting the new construction site set from Bruder, it will come in August
@@BartsteRCModels yes, that's exactly what I meant!
Du bist cool Bartste Rc Models
good job! 👌
Hi bro, love it. Please can i know what sound system did you used
Thanks, Das Mikro from aliexpress
Wundervoll. Du hast meinen kleinen noch verbessert💪🥰
Magnifique de la vrais magie noirs, petite question vous trouvez où les brosses rotative pour les balayeuses?
C'est une brosse de balayeuse bruder, disponible en piece detaché
@@BartsteRCModels merci beaucoup
👏👏👏👍👏💯💯💯💯
Sweet, I have the same exact bruder model but haven't done anything with it yet. Do you have the build video? I need ideas on how to go about it for mine, lol 😂
No buils video of this sorry
Sorry i have to ask, how on earth do you get your servo for turning to run so smooth?? it turns like its hydraulic.
Open tx... Speed crontol instead of position control. The servo move slowly and keep the position when you go back to neutral, like an hydraulic steering. Much better for a loader, more realistic in control and the loader didn't "dance" whan you try to keep a position on steering when you unload your bucket.
@@BartsteRCModels thanks for the info. I will read up more so i can understand the open tx. she purrs like a kitten, i love it!!
Can I ask where do you bought that small hydraulic pump? I have one from magom HRC, but it's too big
It's a fuel pump from HPtech modified in brushless. ZP25M14F
Wow!!
Gibt es eine Anleitung wie man den baut? Um die Funktionen für für die Schaufel etc zu haben hast du das mit einem Stecker gelöst oder mit einem integrierten schnellwechseler?
Non pas de videos de construction, ni d'instructions. La connectique des outils est parr connecteur type BEC et connecteur SBus. Comme mon cat 297D.
Great
That explains why you haven't posted 😅
Hi Bartste Rc Models
Hey. Toutes les modifications que tu as fait sur la chargeuse Caterpillar 906 tu les as acheté sur quel site pour le convertir hydraulique 🤩 merci
Vérins Magom HRC, distributeur Magom et pompe HP-tech modifié maison
@@BartsteRCModels d’accord et la peinture, les roues 🙂. Le démontage est un peu galères par contre
@@DTRC-TP77 Pneus WPL (hard), jantes Magom, la peinture vient de chez CAT
@@BartsteRCModels d’accord Ça marche et après côté télécommande et l’émetteur récepteurs tu me conseillerais quoi 🙂
Car j’ai trop envie de faire le miens aussi ça a l’air trop cool😇🤩🤩🤩
@@DTRC-TP77 Je ne conseil rien, mais j'utilise une Radiomaster TX16 et j'en suis content
💯💯💯💯💯💯💪💪💪💪💪💪💪👌👌👌👌👌👌👌👌🚧🚧🚧🎉🎉🎉🚧🚧🚧