VW Golf mk4 fan control module replacement

Поделиться
HTML-код
  • Опубликовано: 5 июл 2022
  • A/C not working? Compressor not engaging? The fan control module (FCM) could be your problem. I was getting very low voltage at the compressor (1.75v), which is not enough to engage the clutch. All of the fuses were good, so I decided to replace the FCM since it was 21 years old and I had never replaced it before. Upon doing so, I noticed some corrosion on the wires at the 14 pin connector. I then had to locate a pigtail connector and then solder all 13 wires to the existing wiring and it worked! I now have cold A/C and the system works as it should. Make sure you purchase a good quality FCM, preferably VW, because there are some cheaper knock-offs out there that will cause you more problems. I hope that this video helps you and feel free to comment below.
    OEM Fan control module 1J0919506K:
    amzn.to/3OQtEF0
    14pin connector 6X0973717:
    amzn.to/3bWRY9F
    Soldering iron kit:
    amzn.to/3arKnQ2
    Video on the ground wires under battery tray:
    • VW Golf Mk4 electrical...
  • Авто/МотоАвто/Мото

Комментарии • 68

  • @sevexpei
    @sevexpei Год назад +2

    Thanks for the video! With some help I was able to replace my broken module with a used one from eBay, and repair a corroded wire. Now my AC is working great!

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      Excellent work! I'm glad that the video helped you.

  • @khalilRehman-fq8kq
    @khalilRehman-fq8kq Год назад +1

    very nice and use ful video many thanks

  • @octaviansorescu7427
    @octaviansorescu7427 2 года назад +1

    Super Good!!! Good Job!

  • @iam_mk1
    @iam_mk1 Год назад

    how do we know my if my relay os faulty?? my radiator fan speed is very low.

  • @user-vq3ws7it4e
    @user-vq3ws7it4e 5 месяцев назад +1

    Graxias muy buen video y diagnostico very good video thanx uuuu

  • @ericamoss1497
    @ericamoss1497 Год назад

    @Corysdiyauto Is it really necessary to get under the car to remove the two plugs from the FCM? It seems like the pigtails drop down from above so could you not unbolt the module and lift it up to remove the plugs? I'm curious now whether your module was actually blown or whether it was just the broken wires. Did you happen to test it?

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      I guess you could get it from the top if you wanted, it's your choice. I think it's easier from the bottom, but that's my opinion. As far as the FCM goes, I didn't test it. The corrosion from the wires could have been the problem, yes. I just decided to replace the FCM anyways since it was 21 years old.

  • @slimeprivilege
    @slimeprivilege 2 года назад

    were you having overheating issues at idle? i'm having an issue where my car is overheating and seemingly the driver side radiator fan doesn't kick in at all. normally it drives fine and only did this when it was 100+ out the past week, when it starts to overheat and i turn the ac off it stabilizes itself to normal operating temp. i checked the fuse and it was good, then I bench tested the driver fan itself and it spins fine on low and high speed. my coolant sensor seems to be fine too and it's the green top. all i could think to check next is this control relay. 2001 vr6

    • @Corysdiyauto
      @Corysdiyauto  2 года назад

      No, I wasn't having any overheating issues. My A/C compressor just wouldn't engage, that's it. I did have a decent amount of corrosion on the wires for the control module. I would check that area if I were you. I always wanted a VR6! It's definitely one of the best sounding engines in my opinion.

    • @koopaid8165
      @koopaid8165 Год назад

      I have this exact same issue with mk4 vr6 (24v). After driving down the highway for a while if I’m at idle it will overheat. The only issue I can think of is the fan control module. Somehow mk4’s overheating at idle seems to be a common issue and yet, no one has an answer…

  • @user-gk4jz9pl1i
    @user-gk4jz9pl1i Год назад

    Hey, is there a way to check which code model I need for the FCM without taking the old one out?

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      Try looking online at vwpartsvortex.com
      You just need to type in your vehicle information and then search the various parts diagrams and hopefully you can find the FCM part number. I hope this helps.

  • @jamesmanley8
    @jamesmanley8 Год назад +2

    Hi Cory, thanks for all the mk4 related videos youre doing, they are a very valuable resource for all mk4 owners! I’ve got a petrol anniversary with non working AC and the fans intermittently kicking in for no given reason. How did you know that a broken fan control module was the culprit for your AC not working? Did you experience similar symptoms of the fans turning on and off at random?

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      Thanks man! I didn't have A/C because the compressor wasn't getting power from the control module. I also had some corroded wires that needed replaced as well. If you decide to replace the control module, get a good one (VW). Don't go cheap on it because they aren't reliable. Your intermittent fan situation could likely be a faulty control module, corroded wires, or the fans themselves.

    • @jamesmanley8
      @jamesmanley8 Год назад

      @@Corysdiyauto thanks for the reply! I didn’t realise the fan control module controlled the AC compressor clutch. Will defo give that a go!
      Another question, how are you finding your Koni shock absorbers and solid rear axle bushings?

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      I love the suspension setup. It's great for a daily driver, not too harsh of a ride. The Cupra R rear bushings were a good upgrade! You can definitely notice the difference when cornering.

  • @Lunchbox_323
    @Lunchbox_323 Год назад

    Not sure if this is my issue but my fans turn on when driving so that car won’t overheat but fans won’t run when I turn on the AC switch. Any advice?

  • @ericlarsen3511
    @ericlarsen3511 Год назад +1

    Hey Cory - say, how do you go about testing the fan control module? My 2004 TDI Golf keeps blowing the 30 amp fuse when I engage the AC but ONLY with the engine running. Without the engine running, I have both fans spinning. I disconnected the AC compressor coil and it still blows that (S180) fuse on the battery top box. I've inspected all wiring, pulled the FCM like you did in this video and my wiring, connectors, and FMC all look pristine. Pins all shiny and no corrosion anywhere. I'm befuddled. Don't want to spend $200 on a FCM if that's not the problem. I have the FCM pulled out but don't know how to go about testing it. Thanks! Good videos!

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      Thanks for watching! I don't know how to go about testing the FCM unfortunately. They are known to cause all sorts of weird issues though. You can always try replacing it with a used one to see if that fixes the problem. If you do buy a new one, make sure it's an OEM part and not a knock off. It needs to be a good quality replacement.

    • @ericlarsen3511
      @ericlarsen3511 Год назад +1

      @@Corysdiyauto Thanks for the reply, Cory! I appreciate it. Yeah, I don't think it's my FCM as I'm getting short to ground with the fans plugged-in but not with the fans not plugged in. So I'm into the weeds on my problem but it increasingly looks like the FCM is innocent! Thanks pal.

    • @mohamedhawel4094
      @mohamedhawel4094 11 дней назад

      ​@@ericlarsen3511 Hello.. Please let me know if you find a solution to this problem.. I now have exactly the same problem

    • @ericlarsen3511
      @ericlarsen3511 11 дней назад

      @@mohamedhawel4094 Hi Mohamed, Yes! I did find a solution -- it took replacing the fans. Apparently there is enough resistance that builds in the circuitry to keep frying the fuse. I went to the local mega auto parts store and bought new fans mounted on the plate. In my case, I can't easily get the mounting plate out of my Golf so I pulled the fans off of the plate and installed them in the plate that already was mounted in the vehicle. Only took about a half hour -- far less than the numerous days spent chasing shadows and going down rabbit holes. Once the new fans were installed, the fuse blowing stopped and has not returned since. It's been a year now. If it happens again, I would start by simply replacing the fans -- something that fixes most of the issues surrounding this problem.

  • @melebsby
    @melebsby Год назад

    Hello i got same case with my golf, when it need to start the cooler it get clicking sound like something not allowing em to start spinning is my problem the same as your ?

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      It could be, yes.

    • @melebsby
      @melebsby Год назад +1

      @@Corysdiyauto somehow l fix it hahaha my problem was fuse, thanks for reply anyway

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      Easy fix! Good job.

  • @patricksun8465
    @patricksun8465 Год назад

    Hello my left fan broke off and is hanging other fan isn’t moving at all. Took it in the shop and said fan replacement is 560$ and now they are saying my ac module I’m supposing is this is fried and when connected with the 50amp fuse is smelling like plastic smoke and said I need a ac module replacement any tips and things I should tell a new auto shop I’m in high-school and low on money

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      Sorry to hear about your issues. You could look for a good used fan control module on eBay and install it yourself to save on money. Or you can give it to your local mechanic to install for you if you don't want to do it yourself.

  • @steeloversteel
    @steeloversteel 2 дня назад +1

    Bonjour super vidéo !
    Elle va mettre utile énormément je te remercie encore j'aurais besoin du savoir car je possède un golf 4 tdi année 2002 mais je ne sais pas lequel prendre car il y a lettre k et M comment en être sûr

    • @Corysdiyauto
      @Corysdiyauto  2 дня назад +1

      Thank you. Look at your fan control module (FCM) and see what your part number is. Hopefully that helps.

  • @sniperpaintcorrection6790
    @sniperpaintcorrection6790 Месяц назад

    My radiator fan just keeps going even when the car is off and not hot . Untill the battery dies. I have to unplug the fan while the battery is connected so it turns off . Is this caused by a faulty FCM? I feel like this just started after my coolant overflowed on it

    • @Corysdiyauto
      @Corysdiyauto  Месяц назад

      That could definitely be the issue, yes.

    • @sniperpaintcorrection6790
      @sniperpaintcorrection6790 Месяц назад

      @@Corysdiyauto thank you. And one more question . I just changed the radiator yesterday and I have very little coolant leaking out the bottom mount screw where the rubbers go in at the bottom and the little pin that drops in .

    • @Corysdiyauto
      @Corysdiyauto  Месяц назад

      @sniperpaintcorrection6790 - I've never replaced the radiator in mine, so I'm not sure why you'd have a leak unless it's a defective radiator?

  • @warfirebg9354
    @warfirebg9354 Год назад

    What type of engine is that because every engine variant has different module my engine is 1.6sr 101hp

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      It's the 1.9l ALH

    • @warfirebg9354
      @warfirebg9354 11 месяцев назад

      @@Corysdiyauto Do you happen to know what module my engine has.

    • @Corysdiyauto
      @Corysdiyauto  11 месяцев назад

      @@warfirebg9354 - Sorry, I do not know. What year is yours?

    • @warfirebg9354
      @warfirebg9354 11 месяцев назад

      @@Corysdiyauto 1998-1999 ish

    • @user-ro9we8hw7i
      @user-ro9we8hw7i 5 месяцев назад

      ​moteur 130 la@@Corysdiyauto

  • @Adam-oi7kq
    @Adam-oi7kq Год назад

    I changed my relay box still not working I will ch age the radiator switch also don't know what else can be the problem

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      Check your fuses.

    • @Adam-oi7kq
      @Adam-oi7kq Год назад

      @@Corysdiyauto also checked

    • @Corysdiyauto
      @Corysdiyauto  Год назад

      @@Adam-oi7kq - Do your fans turn on when you push the A/C button inside the car?

    • @Adam-oi7kq
      @Adam-oi7kq Год назад

      @@Corysdiyauto no nothing could be resistor in the fan unit ?

    • @Adam-oi7kq
      @Adam-oi7kq Год назад

      @Cory's DIY Auto I also bridge the radiator fan switch and only seems to come on high speed when bridgeing

  • @vw_beetle_dave
    @vw_beetle_dave Год назад

    my ac fan works but my other big fan does not spin . . why would this be

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      Well, it could be several things. Check the simple things first, like the fuses. It could be the fan motor that's bad too, or a faulty FCM. I would check your fuses first, then move on from there. Hopefully this helps.

    • @vw_beetle_dave
      @vw_beetle_dave Год назад

      @@Corysdiyauto fuse looks good big fan does spin by hand but bit stiff

    • @Corysdiyauto
      @Corysdiyauto  Год назад +1

      Also, look for any signs of corrosion on the wiring. You could have a bad fan motor.

    • @vw_beetle_dave
      @vw_beetle_dave Год назад +1

      @@Corysdiyauto more then likely bad fan I’ll take a look.

    • @vw_beetle_dave
      @vw_beetle_dave Год назад

      @@Corysdiyauto looked at fan and it looks and feels bad so ill get a new one

  • @vampir335
    @vampir335 2 года назад

    I bought a cheap knock off and it never worked the way i wanted it to

    • @Corysdiyauto
      @Corysdiyauto  2 года назад +1

      That's not good. Sometimes you have to pay more for quality parts....... especially for these cars.

  • @dynamo4543
    @dynamo4543 6 месяцев назад

    the module is in such an annoying spot

  • @zdenekkindl2778
    @zdenekkindl2778 23 дня назад

    Why is your car so dirty? You should see my car…!

    • @Corysdiyauto
      @Corysdiyauto  23 дня назад

      It's my daily driver, not a show car. It's typical for western Pennsylvania.

  • @deyninhagmailcom
    @deyninhagmailcom 5 месяцев назад

    Pode ser problema no modulo, que não passa contato para o relé?