2014 Hyundai Sonata AC HEATER BLEND DOOR ACTUATOR REPLACEMENT
HTML-код
- Опубликовано: 18 май 2024
- 2014 Hyundai Sonata AC HEATER BLEND DOOR ACTUATOR REPLACEMENT
Thank you for watching and I hope my video helps.
My problem was the air only would blow through the top vents (defroster).
Tools needed:
•10mm socket
•8mm socket
•Quarter inch ratchet
•Very short Phillips screwdriver
• Pry tool 
Also make sure you stretch. Your arms and back will not like after this lol
You are a determined, persistent, motivated, talented lady, with a great personality!! Just WOW!!
About to do this for a 2015 Sonata. To get the pin in on the new actuator, turn the temp dial while ignition on to have arm rotate until pin aligns up. I found your video useful! Dealer prices to do this are outrageous! 5 stars for attempting this! This video should be entitled: "The Good, The Bad and the Ugly". The good is your son watching. The bad is twisting yourself as a pretzel to get it out and the ugly is the broken piece!
Love it. Thanks for watching
i’m having the exact same problem, AC only blowing through defroster! definitely gonna try this
My advice is make sure when you pull it off that the green or what ever color yours is either stays on or if it comes off that all the little arms goes in there groove.
Good luck hope this video helps you 😊
I’m currently replacing mine too on my 2014. But can’t get the white lever pin to line up (same one that broke on yours). Did you ever find out what door that broken pin controlled?