For the 2022 z650, might be 2020 - 2023, The flasher relay is on the Left side of the bike kind of above the horn. Take off the front fairing and you'll see a bank of relays. The one you want is mounted behind those. it'll be on a rubber...thingy. Put rubber thingy on the clip on the new flasher relay and hang back where you found it. you don't have to take off the whole front fairing, but it makes it much easier if you do. I even took off the very front fairing.
If you add you TST rear integrated tail light but you do not add the front turn signals. Do you still place the LED flasher relay? Will the LED flasher relay work with the stock OEM front flashers? thanks
Changing even one set of signals will precipitate a faster flash rate. If you are ok with the faster flash then you can potentially just leave it alone. But if you are using sequences in your tail light, the signal sequence will not light up all the LEDs so you are shortchanging yourself unless you get that flash rate back to OEM rate. And yes, our relay is compatible with mixed signaling devices so tail light in rear and oe fronts will work just fine.
This is located on the clutch handle side of the bike under the plastic shrouds at the front of the bike on the 2020 model. You will not have remove the plastic around the key.
@@lukeofearth1036 We have a 2020 Ninja 650 in the house and that bike has different connectors onthe rear signals. The tail light connection has not changed. I wonder if the signal connectors is what you meant. We are already selling a sub-sku of this light with the new connectors.
So I recently purchased those same exactly signals for my 2024 z650 I’m getting a combination of a hyperflash along with both rear and front signals flashing very dim, what is the issue I am having and how can it be resolved?
@@RollinWithSteven for this issue I will have to encourage you to connect with our customer service department theough our website. When you use our support portal you can exchange media and information, enabling our guys to solve your problem quicker and more precisely.
Can confirm if the z650RS has it on the same location? that means i have to remove the tank cause it doesn't have a top cover like that. thats a lot of work for just a relay replacement. I ordered the tst echo pods, hopefully i wont need to replace the flasher relay.
I looked at parts fiche for the RS model and it looks like the relay is mounted under the seat, up above the rear wheel. Much easier access than up front.
@@TSTindustries Its not there, forgot to mention, i live in Asia, probably its in a different location. i believe other region units are different some comes with a halogen turn signals, ours comes with LED turn signals already.
@@3xk890 well since you said you already have the signal lamps on the way, let's see if they will work without relay replacement. You may be fine if you are just changing one signal set. If not then we can try helping you some more.
I have a 2020 Z650 and i bought the set and installed them and they look awesome. However, I couldn't find the relay because it is not in the same place as shown in the video, so by any chance, you would know the answer ? otherwise awesome products.
According to parts fiche the relay is hung on a steel bracket on the left side of the bike just above the horn. This now mimics the exact setup that the Ninja 650 has. We currently do not have a video showing the installation but if you remove the left panel that has the Z sticker on it behind the headlight and below the fuel tank, you will find the relay.
I believe that bike has a two position plug on the relay. If you take a photo and send it to us through our support email on our website we can make you one that will fit. What would be even better, is if you sent us the relay. This way we can turn it around for you and send you one that we have tested to definitely work on your bike.
For the 2022 z650, might be 2020 - 2023, The flasher relay is on the Left side of the bike kind of above the horn. Take off the front fairing and you'll see a bank of relays. The one you want is mounted behind those. it'll be on a rubber...thingy. Put rubber thingy on the clip on the new flasher relay and hang back where you found it. you don't have to take off the whole front fairing, but it makes it much easier if you do. I even took off the very front fairing.
If you add you TST rear integrated tail light but you do not add the front turn signals. Do you still place the LED flasher relay? Will the LED flasher relay work with the stock OEM front flashers? thanks
Changing even one set of signals will precipitate a faster flash rate. If you are ok with the faster flash then you can potentially just leave it alone. But if you are using sequences in your tail light, the signal sequence will not light up all the LEDs so you are shortchanging yourself unless you get that flash rate back to OEM rate. And yes, our relay is compatible with mixed signaling devices so tail light in rear and oe fronts will work just fine.
Superb!!!! Just placed and order a minute ago....
Fantastic!
so if I have oem front and led rear will it cause any problems?
No problem. That is a supported combination.
Any idea where the flasher relay is on a 2020 Kawasaki ZH2
In examining parts fiche I found that the relay hangs on a frame fitting that is screwed to the bosses in front of the steering tube.
This is located on the clutch handle side of the bike under the plastic shrouds at the front of the bike on the 2020 model. You will not have remove the plastic around the key.
hmmmm...I can't wait to get one in house to re-make the video for the newer model
@@TSTindustries The connections on the factory taillight have changed too. But the light works and looks great.
@@lukeofearth1036 We have a 2020 Ninja 650 in the house and that bike has different connectors onthe rear signals. The tail light connection has not changed. I wonder if the signal connectors is what you meant. We are already selling a sub-sku of this light with the new connectors.
Yeah, the signals.
So I recently purchased those same exactly signals for my 2024 z650 I’m getting a combination of a hyperflash along with both rear and front signals flashing very dim, what is the issue I am having and how can it be resolved?
@@RollinWithSteven for this issue I will have to encourage you to connect with our customer service department theough our website. When you use our support portal you can exchange media and information, enabling our guys to solve your problem quicker and more precisely.
Can you tell me please which relay should I order what is its data?
Can confirm if the z650RS has it on the same location? that means i have to remove the tank cause it doesn't have a top cover like that. thats a lot of work for just a relay replacement.
I ordered the tst echo pods, hopefully i wont need to replace the flasher relay.
I looked at parts fiche for the RS model and it looks like the relay is mounted under the seat, up above the rear wheel. Much easier access than up front.
@@TSTindustries Its not there, forgot to mention, i live in Asia, probably its in a different location. i believe other region units are different some comes with a halogen turn signals, ours comes with LED turn signals already.
@@3xk890 well since you said you already have the signal lamps on the way, let's see if they will work without relay replacement. You may be fine if you are just changing one signal set. If not then we can try helping you some more.
@@TSTindustries im changing front and rear. may need to watch videos on how to remove the tank now. haha
will keep you updated
@@TSTindustries
Do you ship to Saudi Arabia? I would love to have all these set on my 2019 z650.
We have a dealer in Dubai that you can order from. Check out our deler locator here: dealers.tstindustries.com
Sir baka pwede pasabay paship dito sa pinas hehe
I have a 2020 Z650 and i bought the set and installed them and they look awesome. However, I couldn't find the relay because it is not in the same place as shown in the video, so by any chance, you would know the answer ? otherwise awesome products.
According to parts fiche the relay is hung on a steel bracket on the left side of the bike just above the horn. This now mimics the exact setup that the Ninja 650 has. We currently do not have a video showing the installation but if you remove the left panel that has the Z sticker on it behind the headlight and below the fuel tank, you will find the relay.
@@TSTindustries Followed your instructions and easy to install on 2022 Z650 thanks!!
Thank you! 🤘 @@TSTindustries
I have a 2020 z650 the relay location doesn’t look to be in the same place can you tell me where to look
From our understanding it's on the opposite side of the steering neck. So left side instead of right side.
You will find the steps in this video ruclips.net/video/fjZM4yerQCg/видео.html
Is the relay on 2019 z650 same shown here?
same, i just want to add on the 2022, the relay is behind a bunch of connections. you can't see it easily.
Ayeeeeeeee 😊😊
Is this available for a 2011 DR650
I believe that bike has a two position plug on the relay. If you take a photo and send it to us through our support email on our website we can make you one that will fit. What would be even better, is if you sent us the relay. This way we can turn it around for you and send you one that we have tested to definitely work on your bike.
Спасибо 🇷🇺