Portable bass boat vs. large kayaks | 1232 Tracker Topper to Yak Killer
HTML-код
- Опубликовано: 8 сен 2024
- This is how to turn a 12ft jon boat into something that can invade the comfortable territory of a kayak with all the qualities of a true tiny boat. This project was formerly referred to as the JonYak; however, after careful consideration of this project's origins, the decision was made to call it what it by its original name: the Yak Killer - a jon boat to bass boat conversion created to redesign and reimagine what creates the standard for minimalist fishing & small water craft platforms.
_______________________________________________________________________________________________
Products for this build
Aluminum build kits: tbnation.net/c...
Livewell systems: tbnation.net/c...
Boat electrical: tbnation.net/c...
EVA foam boat flooring: tbnation.net/p...
*Find TBNation on other social media platforms by searching "tiny boat nation"
_____________________________________________________________________________________________
Time links for this video:
0:01 - Introduction
4:09 - Gutting the JonYak
5:19 - Solid Buck Rivet Install onto boat ribs
5:59 - Coosa Board Transom Upgrade
6:55 - Using stainless steel hardware on aluminum framing.
7:27 - rivet-together, water-proof totes
8:02 - Using cleco fasteners for sheet metal work
9:18 - creating the subfloor
9:35 - Gen-7 Subfloor plan
9:59 - Lining styrofoam subfloor sheets with aluminum tape for preservation and longevity
10:24- Cutting Aluminum totes to fit.
11:24 - Hinges & t-framing
11:38 - creating double-wall channels for serviceable boat wiring layouts.
12:04 - Water diversion lip | dry-hatch installation
12:52 - Gen-7 Core overview: Importance of micro-framing in a 1232 Jon boat.
13:21 - Welding vs. Riveting together micro-frames for boats.
13:58 - making an aluminum day box from scratch.
15:06 - finishing double-wall boat wiring channels.
16:37 - How we painted the jon boat
18:28 - Gatorglide super slick marine epoxy on aluminum boats
19:53 - finishing up the paint job.
20:22 - finishing the framing
20:34 - framing rod locker interface
20:53 - electric panel framing Part 1
21:15 - rod locker hinge install
21:52 - rear rod locker interface
22:05 - floating subfloor bracket install
22:37 - bending aluminum with a bench vice
23:29 - vented flooring install - perforated aluminum install
25:02 - vented flooring water test.
25:31 - electric panel framing Part 2
25:44 - back frame preview
25:54 - foam corner pocket preview
26:04 - transom Bracket install
26:14 - Gatorzkinz install pt.1
26:32 - Royz shallow water anchor install preview
26:45 - boat dolly install and preview
26:58 - rod locker interface finish
28:30 - side panels for rod locker double-walls
28:52 - eva foam side panel install
29:34 - double wall access panels
30:03 - benefits of a good electric layout
30:24 - corner foam pockets Part 2
31:06 - when pour foam goes BAD…
31:27 - using GAP filler for pour foam install
31:51 - eva foam interior layout33:20 - pour foam finish
32:40 - murdering out the frame
32:45 - gatorskinz softouch install
33:27 - creating the deck
34:01 - coosa board stationary panels
34:46 - Gen 7 micro framing - START
34:57 - using Duralar to template hatches.
35:12 - cutting aluminum sheets to fit
35:27 - attaching sheets to the hatch frame
36:18 - templating middle hatches
37:35 - Gen X Hatch overview & install
38:38 - channel lid supports
39:12 - the truck bed test
40:20 - Preparing hatches for eva foam
41:02 - eva boat flooring install
41:34 - hand-routing Orthodek eva foam on boat hatches
42:55 - Eva foam routing MONTAGE
45:12 - Installing stationary panels
45:32 - attaching hatches to hinges
46:34 - electric panel layout - START
47:56 - brief schematic on boat electrical
51:32 - fish finder installation
52:18 - bow plate fabrication
54:30 - pro nav marine overview
54:58 - Jon boats vs. Kayaks: Comparison of features
58:24 - End Reveal - the Yak Killer
___________________________________
* GET EXTRA HIDDEN VIDEOS OF THIS BOAT PROJECT:* Patreon.com/TBNation
Full Amazon Store: www.amazon.com...
_______________________________________________
Instagram link: / tinyboatnation
Instagram: Handles
@tinyboatnation
@titan_of_DIY
_______________________________________________
*Find us on Facebook
Our Official Page: / tinyboats
Our Group Page: / 1705177409792306
______________________________________________
Music:
From RUclips Free Creator Library. or Artlist.io
@tincancrew_official
@senditjonboats
@tinyboatnation
@fireantboats
@fewmanboats
@nathanieleckhold
@adamryana@adubjones@jmbfishing@kayakdiy
Disclaimer: I am not a professional fabricator or builder.
I am a DIY Creator supported by this channel's audience
to put out concepts for people to view.
Modify your boat at your own risk. milwaukee
I love the idea of a smaller boat but it doesn't need more gizmo's than a Space Shuttle to catch fish. Nice work!
agreed, I guess thats the reason for these guys to use a jonboat instead because the kayak is so cramped and overloaded with stuff...the jonboat holds more stuff lol
Wrong
You can find REALLY nice used paddle kayaks (some even throw in nice paddles and life jackets etc) for $400-$700. I'm talking ocean kayaks, viking kayaks, Wilderness systems tarpons etc the types of paddle kayaks that I've personally caught saifish, tigers, mahi, huge kings, cobia, black tip/white tip etc and used the same kayaks to go inshore and slay bull reds, gator trout, stud flatties, mangroves etc.... and a different day plop it in some pond or lake and catch bass all day long. NOTHING will ever beat a kayak for the money. Even if Your talking new paddle kayaks capable of extreme offshore kayaking to calm ponds there are plenty in the plus or minus $1,000 price range that you can paddle all day long, they track well, are fast, cut through the waves like a hot knife through butter and will keep you in amazing shape... I went from 300lbs to 180lbs fit as a fiddle with more endurance than a horse. Truly, the kayak is king and with the workout you get... will add a couple years to your life.
I have kayaks and aluminum boats with outboards. I like them both. Each has it's advantages. I use whichever seems best for the kind of fishing I want to do. Michael builds some awesome boats but I don't look at the comparison between kayaks and tin boats as a competition.
As a yak dude i approve the name of "The Yak Killer" . That thing is awesome!
Guys, Im a 59 year old Aussie combat vet. I love my kayak fishing, my wife just bought me a 3.88m sea jay, Barra punt with an 8hp evinrude. You have inspired me to project the hell out of her.
Aluminum truck-camper builder here.... this is so well done! Love to see it. And thanks for a few ideas ;)
I didn't even realize that this video is over an hour long. Definitely enjoyed it.
Thanks!
After finding Send It John Boats channel I came over here. We sold our 17ft aluminum tracker a couple years ago. I miss having a boat plus I want to learn Tig welding. So here I am. Time to start looking for a Tincan and work on it as the budget allows. I'm in East TN so I have access to some good parts places around here but I'll be asking questions but hopefully there is already a video on what I need so I dont need to bug anyone.
That intro was the coolest 3½ minutes I’ve seen on RUclips. Now to go watch the rest of it!
Other than the hilariously pretentious and abrasively self-serving first minute or so, featuring imaginary naysayers and a severely overinflated sense of self importance. Unfortunately themes that run through many of his videos. Just let the work speak for itself without sounding like putting a deck in a jon boat is changing the world.
That really was amazing
The craftsmanship put into this boat is impressive. Such a cool thing to do.
I wish you could get these boats mass produced I think there is a huge market for your boats
I want one for sure. I love it but don't have the mechanical abilities to build and wire i don't think
Only problem is the man hours it took to build it. They would never be able to keep the cost low enough to make it work. It would probably over 5k for a boat like that, which is kinda stupid when you can get a job boat for cheaper.
Why?
It's top heavy as shit, and cost way more to make than he says.
He's clearly not considering tools or time.
The reason boats like this are not on the market is because they're garbage.
Just because you put power poles on something doesn't make it good.
The hull itself is gonna be 3k, factor in all that work and material and tools, and this dude is full of crap when he's trying to say he built this for under 5k.
@@marcuslarwa9098 It can be done. Air inflate flat top. Done.
@@kouchang13 then it’s not the same boat.
I must have watched this video a dozen times by now and I love it. Kayak killer? Not quite. But perhaps the most impressive utilitarian tiny boat to date.
Thanks for watching!
@@TinyBoatNation truly my pleasure man. Thank you for all of the knowledge.
@@TinyBoatNation how much
how much
That yak killer turned out so sick. It is cool to see everything packed in that small of a boat!
I have a 1232 riveted Jon and it makes a great river boat. I kept it pretty basic and just added a folding swivel seat on the rear bench, a sub floor, and anchor lift system. I can sit, stand, and walk up and down the boat no problem. Between the boat being so light and having an oversized trolling motor im able to talk it up river a few miles and float back down.
1st time to TBN today.
Thoroughly Impressed!
Great outfit, execution, information, knowledge and freely shared wisdom wins you a NEW SUBSCRIBER 🙌 this afternoon.
Thank you for what you are doing on TBN and the growing community of diehard enthusiasts who are dedicated to getting it done as inexpensively efficiently and correctly by sharing failures that lead to real world success in the small fishing platform niche.
Bravo's Mahalo's and Aloha's from lower western Michigan
Cool build for bass fishing. Love all the storage. Biggest advantage with a kayak is they can go anywhere including the ocean. I have a Solo Skiff which gives me the kayak with the 6hp motor but definitely lacks the storage of this build significantly.
The skiff is way better idea than this beautiful boat
Just now discovered TB nation i am excited to witness and see how these projects take shape and become very successful and easy to use.
Thanks! Glad to hear it.
@@TinyBoatNation how much
The routing skills were crazy good! Great build! I did this to an old Bass Tracker 3….this video makes me miss that boat! I agree… the tin boat community is top notch! They really came through for me when I needed their help!
Gotta love the Trackers!
Kudos, for all this filming and above all the editing. 👏
And the ton of information 🙌
Thank you!
I’ve been kayak fishing since 2012, since I could never afford a “gas boat”.
This is AMAZING! Wish I could afford to do this.
Simply amazing!
I have seen this video 10 times, every time I think, this I can do............ then I watch it again and say man this is too much for my unskilled ass to take upon myself, regardless its inspiring to watch every time. Thank you for the knowledge and great vid
You need to start with a basic version like he did,
That routing tool though. That was the most satisfying shit I've seen in a long time :0 takes it from 0-100 instantly
Horses for courses. I've had boats for bass fishing from 9.5 to 21feet in length. One thing that I know deep down now: If I'm driving to the lake, taking my free time to fish, I want to be able to run the water conditions when I get there. For me, that's a 20ft Gambler with 275hp. For others, it may be a 12 foot Jon boat. Just depends on your needs. I ended up with a full size bass boat after spending many weekends getting tossed around in big waves, big water, running out of storage, and not having enough deck space. Again, what works for me, might not be ideal for you.
I do commend the amount of effort that goes into these little boats though, and I'm glad they're inspiring people to get out on the water.
I gutted and remodeled a 16 Monark. And is the best boat on the water. Make the best of what ya got. 🙌
Completely agree!
Nice quality. Learned a lot here to help cut weight on a regular build. I would still prefer either a kayak or just a bigger heavier j boat.
You say that until you fish on it....
Now I want one so bad, it’s exactly what I’m looking for
Coming soon.
Absolutely fantastic job guys very impressive stuff now market them
anodizing may also increase the structural strength of your hatches and deck that coud be done in a reasonable tank im so glad i found you i have wanted to do a project like this for awhile
Very cool, well thought out build. But I think the last comment sealed the deal… “2 people? Not so much.”
My thought in transitioning to a truckable boat from a kayak would be to take a kid or even a buddy with, but I don’t think this would be stable enough for them. Sitting on a basic tandem kayak with fewer accessories allows them a safer platform to fish from, especially in our local lakes with lots of wake surfing going on.
Plus the boat is way bigger to store vs a kayak on its side for those of us with minimal space for stuff.
I still caught some great tips for build approaches and loved the fit/finish you got overall. Keep it up!
Awesome job on the boat ot looks great, i want to do something similar to my 12ft tracker!!
Really cool boat!! Nice job too, like those synthetic flooring and panels. Did really good freehand work with that trimmer. I’m a retired carpenter and remember I did some freehand trimmer work occasionally 👍
Well, don’t let those girls go to waste! Get some foam and try it out
what a cool little boat
Right on the stability. One thing i lerned decades ago. you do not want a flat bottom boat. Much more stability in v hull.
This is a bad ass boat, and I would love to own one over a hobie 360 any day. I find it hard to believe this could be built new by anyone for at or "just under" 5k. Would love to see an accurate price sheet for the build. Considering a jon boat, outboard, trolling motor, and pro nav would net you around 4.2k brand new...that's not taking into account all the other materials, consumables, and of course tooling to build this thing. If this is supposed to be considered a *remotely* accurate comparison, that all needs to be taken into consideration.
@@TinyBoatNation can i pay you 7500 to build one for me?
Super badass! If you could make and sell these for 8000 without all the bells and whistles then it would definitely be highly competitive with a PA 14. Something tells me that manufacturing this for sale would cost a heck of a lot more though. Still, super badass.
Thank you, this is exactly what I have needed for many years...
Holy smokes!! Watched entire vid..great attention to detail and full demo of build...super stoked!! This vid was worth every minute of my life and I thank you for smacking big corporate in the face with router skills vs CNC lol..best part !!! Truly best jonyak EVER! damn right I subbed
Thank you!
Just found your channel all I can say is WOW!!! Awesome!!!
The real failure of the kayak industry imo is the pricing. It started out as a way for the average person to get on the water and fish- that was the niche they were trying to fill. Nowadays ppl seem to think they were trying to make something portable that could get into skinny water and blah, blah, blah- those are definitely beneficial points to owning one but I don't think it was the original intent. The main purpose was to make something much, much cheaper and easier for the average person to buy, store, transport, launch, and fish off. But that goal has long ago been abandoned and now we just see more and more expensive kayaks and small boat setups- they cost as much as a full sized tin rig now. For less than 5gs I can buy an almost new full sized tracker w/trolling motor and trailer- ready to go. Not that I would want that over a kayak but- the point was to make them more accessible to the average Joe- that's not happening anymore.
The company who finds a way to offer stability and a decent platform to ppl that they can expand on as they go- for less than a thousand dollars, is going to kill it. But these Lifetime offerings and kayaks like them- they're missing the mark horribly. They're so close to getting it right but, they always screw it up. They fail to make their kayak in a way that you can easily add things like a main motor, trolling motor, peddle drive, rudder, electronics, etc.- they don't even make it easy to add a simple gear track or anchor system. Every time you want to add something you find yourself having to seriously modify the platform so it will fit and work. How difficult is it to look at the market, see what accessories are the most widely used, and make your kayak so that it accepts them? And do it for less than a grand- it shouldn't be that hard really.
I agree (mostly)...I have been kayak fishing for decades...so I was into this WAY before it was even a "thing". For me and a lot of OG fishing kayakers, it was simply a great alternative to using a float tube, and that was it. I started out white water kayaking in the 80s and at some point had a revelation that, "hey, this would work on calm water just fine and I can cover way more water than with my slow, ponderous float tube"...back in those days people looked at me like a circus freak show for fishing from such an weird platform...fast forward 30 years and now it is THE fad in fishing...and I hate it. You are right though, that the kayak industry has evolved from a great, cheap alternative to a float tube, into $5000 battle ships. Yeah, I know I am just a grumpy old man, and kayaking elitist, but once you start talking about motorizing your kayak, and adding electronics, and adding anchor trollies, and adding down riggers, etc etc etc ...just go buy a f'ing boat! At that point you have completely defeated the entire purpose of having a kayak to begin with, and this is the part that I disagree with you on...the cheap lifetime kayak is the direction things should be going, as the simple, lightweight, super portal, minimalist approach is supposed to be the whole point of kayaking.
I disagree completely. There are more affordable kayaks on the market than ever before. You can get Pelicans and sun raiders just about any Walmart. When I bought my first Ocean Kayak Scrambler in 03 you had to go to a specialty kayak shop to find one. Yes there are plenty of expensive yaks out there too but we just have options now. I fish out of my 20-year-old OK scrambler more than my Hobies simply because it's easier to toss in the river and go for a quick after work trip. But I like having the hobies for when I want to fish bigger water all day.
@@ezye361slezzyne8 I agree. The big expensive kayaks get all the attention on social media and youtube but there are plenty of inexpensive minimalist kayaks out there. And the customers ultimately drive the market. Large kayak manufacturers have marketing teams who job it is to figure out what people want. People who claim the big high dollar fishing kayaks are ruining kayaking just dont want others on "their" water and I dont blame them for it...who want there secret fishing spot to blowup with every tom, dick, and jane. But those large kayaks aren't ruining kayak... they're just for people who have different desires than those who want a small paddle kayak
You can still buy $300 kayaks and those are a whole lot better than the comparable kayaks of 10-15 years ago
@@beenstork exactly. Kayaks used to be fairly expensive. My first ocean kayak was around 500 bucks for just the kayak and seat in 03. Now 500 bucks will get a purpose built fishing yak that doesn't need much to be a serious fishing rig. Also Hobies are awesome and worth every penny, if your hating on the high end kayaks you don't know what your missing out on.
That is a really sweet build! But like you said, unless you could do it yourself, it would be much more of a cost to have it built. Personally, I’d prefer it with less deck and just a bit more seating. Would love to see you guys do a build on a Pelican Bass Raider!
Pelican Bass Raider is coming up!
Cool video and very cool build! I’ve never been in one of those giant kayaks but I’ve always wanted one but after seeing this I’d probably want the boat more just because of the stability.
You should!
That thing is jaw dropping. This is something I must consider building (or having built). As a larger guy with bad knees kayaks just aren't something I am fond of. The Kaku Zulu Hybrid was on my short list. But this would be exactly what I want for mangrove fishing and transport to and from my saltwater wade fishing spots. I certainly don't have your skill set. My build would look like a hack job. I've got a 1985 Alumacraft 1236 sitting behind the house. Hmm, time to play perhaps.
Get r dun!
That thing is super cool, I'm not sure if I'd give up my hobie for it. As a proof of concept, you guys killed it, I could certainly see this as a genesis for more inspiration and experimentation in the small craft and kayak communities. Outstanding work.
A simple wood and fiberglass "skeleton" seems to be the obvious evolution. You could basically run sticks in a grid and glass 'em all together. Would be lighter and stronger than that thin-walled aluminum. This is not a knock on this build, but rather looking for ways to further prove the concept. I think if you could get the dry weight down under 150 lbs, it would be a huge advantage. Also, unless those manual pole anchors have really good reach, I think I would substitute a simple pole-through-sleeve pole anchor and save several pounds each.
I'm impressed fellas! Keep up the amazing work!
Awesome video and sick boat, I definitely want one lol! I am an electrician. Romex can breakdown with constant moisture and drying out. I've seen it ran in outdoor kitchens and they short out internally because the sheathing on the wire cracks from getting wet and drying out. THHN should be used instead.
As a guy that works in a kayak shop, and owns 3 vibe shearwaters, I’m definitely watching this whole video, and loving ever second of it.
But I would try and do this with a Panga style boat for saltwater.
We are hoping to get into modifying Job Boats and selling them as we already deal in solo skiffs as well.
@@TinyBoatNation awesome work by you on that beast of a project
Great friends project! Awesome boat!
Thanks again!
I am a Hobie Outback owner and I gotta say, this is a sweet build!!
My favorite comment yet!
Everything about this project was impressive. I enjoyed watching the video. The boat has enough advantages over a kayak to make it worth considering.
A great build and video. I fish Havasu and hopefully I'll see you out their! Thx!
Nice little bass boat. Looks clean. I'm definitely thinking of building one since we lost the use of our marina slip at our lake this year. Well, we didn't lose it, we gave it up to an elderly couple who are in their 70s. I felt bad watching them bring the boat in & out of the water almost every day. So I have up my slip so they can enjoy their retirement. Something this small I can launch it right out of our backyard where won't need a ramp. Next year we get to build our dock which will be awesome.
I took a 1648 lowe and built my first bass boat and it was a learning experience. I almost sank it on Havasu too with my wife on it with me, few weeks later she said ok to a glass boat...lol
Whatever it takes!
I think the work having to be put into building this would keep the kayak in this fight. This thing is fuggin sweeeeet though. Very very very nice
Clean build mate
With all the hours and labor that went into that boat, it’s like the Ferrari of John boats. I mean what a awesome custom build. I would want a pretty penny for all the time and hours and craftsmanship put into it!
Thank you!
JUST ABSOLUTLY LOVE IT!!!!!!!!!!!!
The place I could go with this rig, awesome work guys!
This is Awesome. I remember me and my best friend when we were like 15 - 16 and our neighbor who was 30 had a little john boat and drivers license and a truck, and us two and the neighbor would get in that thing with a trolling motor and go fishing everywhere normal boats couldn't.
we should have pimped it out like this !
Thank you so much. Love the content......
My wife not so happy about new project
Great video and attempt to cross the gap between kayak and boat... would like to see more kayak / john boat battles like this! 🎣✌🇺🇸
Should have compared it to the nucanoe frontier 12 since you had an outboard and trolling motor on the yak killer. I have seen some people put a 5hp coleman outboard on the frontier 12 with a 6 gallon tank.
i have an unlimited with an xi3 and i woundnt change it for this boat plus this boat probably cost 13 to 16k to make
It was 5k
Love seeing all you do. fit and finish is top notch
Master Fabricator!
Thanks!
nice boat. Kayak killer no. Lake boat, creek Kayak. Its comparing oranges to bananas
Dude you are an artist.
New to the channel. Outstanding job. Who knew you could elevate a plain jon boat into a mean fishing machine. 👏
you need to see the other videos, and check out Abu Jones as well; he does pretty good builds too
So true… I have a titan and ended up getting a trolling motor for the long hauls.
I remember watching some of your jon boat mod videos almost 10 years ago when I had a V-bottom that I was looking into modding out. You have come A LONG way in your skill and know how. Cant wait to see where you'll be in another 10 years. I would love to see a company like tracker or lowe start making tiny bass and tiny v-bottom boat that offer the same features as the large ones or at least some of the same features. I think this will only keep gaining in popularity. It would take a large company like those to scale it up enough to make the small fishing boats cheap enough for the average Joe to buy because why would you buy a tiny boat that is 4/5 the cost of a full size???
Bro I felt that ramp slip.
Nice job! Sick build
Thanks!
*I will give this boat away once this video reaches 20,000 Likes!*
*How to qualify:*
- Like
- subscribers
- comment
- share*
The Hobie PA is a tough challenge. It's the Lambo of kayak fishing with the best drive system on the market. If you want to put your Kayak Killer against something more apples to apples, challenge the Nucanoe Frontier 12. 12' long, 41.5" wide, 750 weight capacity, has a Transom, crazy stability, no drive, weighs 87 lbs, costs $1499. That last point is probably the biggest point of contention because there's no way you're duplicating those stats at that price range.
Overall I think you guys killed it. Really nice clean work. A cool addition might be to cut some of that sea deck and recess some gear tracks in true kayak fashion and add some gear track accessories like cup holders, or rod holders for a catfish or crappie set up.
This thing kicks Hobie in the teeth.
My goodness she goes are awesome! That was a wonderful boat. I wish I had the skills to build on myself, unfortunately I don't It was great watching you guys
You can do it!
That's amazing, I would do anything for one of those!
If you build it, it will come!
Ok this tiny boat aka the Yak-killer is one bad boat...🎣💪👍
Thanks!
I put a 10 foot 4 in round pvc pipe with a rounded 90 elbow along each side off my little 12’ Jon and it made a huge difference in stability. I don’t have to worry about feeling like I’m going to tip it just by standing up let along trying to piss off the side lol
You sure do a fantastic job with aluminium. I’ve worked with it as an aircraft mechanic. So I know the skills you have.
Thank you! Truly a great compliment coming from someone with such skill.
This is awesome! Great build! I have an xfish plus and i love it but being able to store all that gear under the deck is a major advantage in your design.
So much more than a Yak for sure!
You are a G.O.A.T my guy awesome build and great video🔥👍🏾
Thank you, sir!
I sold my modified 1436 as soon as I had to drag it back up a river for a couple miles. Bought a nucanoe frontier 12 the next day and haven't regretted it once. Added a kaku zulu to the fleet, both with pedal drives and I have to say, I'll never have a boat again unless it's for cruising.
Awesome Channel 1st time watcher , Subscribed ! TOP notch information , I'm glad I found your channel ;)
Awesome, thank you!
Amazing skill and knowledge in your craft, wish i had the expertise.
Thanks, Greg.
Damn nice build!
boat ramps get slick !
I'd luv to have one of these...
And your attention to details is fantastic...
Form and appearance seem important..but FUNCTION and integrating as much useful things is what I find the key here!
Great job..
Now I just gotta get my metal working skill up a tad....and we'll, get a budget saved up big enough to even attempt something like this
what a sick build
Thank you!
Are you guys selling these? Awesome mix between the two and would take off since the kayak tournament world is taking off and people are modifying them with outboards and trolling motor. This is definitely a breakthrough build. I would buy one
That is kick butt, awesome boat!
Dream build
Красиво сделал, настоящий мастер.
Good job and nice wristband brother
You guys killed it , Love the Boat even know I'm a Kyak Tornament Angler here if Florida if you ever wana put some red fish on it because my yak has noproblem fresh or salt how about u..
9.9 would be awesome for longer trips
Love this idea, I used to swim out to a floating dock and fly fish off of it. I liked having a flat platform to stand on top of the water to fish from. You have gave me something to consider here as a concept to fly fish from also.
that dude at the end looked timid af standing on that thing. like he might fall in any moment
wow you left me speechless
Great!
Awesome boat... too heavy to kill a yak but still cool. My 15' Kaboat loaded is like 160lb.... kayak still kills the convenience/ mobility factor
Agreed, my hobie revo is hard to beat.
Your work is unreal man! Awesome job. I do look at this a tiny-tiny boat. It can fill some of the roles that kayak does but its not a kayak killer. Theyre in just two different classes. Just my opinion. Killer work!
You would just have to be on it to know what it is
Awesome work. Been following you since the beginning. There's one kayak that I would throw against the build. Wavewalk S4. I used one in Hawai'i to catch yellowfin, mahi & wahoo.
Yes looks cool and yes it is probably more seaworthy but with this build having integrated rod locker, electronics, other storage..........then this build doesn't compare
Super sweet stuff. Wouldn't say it holds up to a bass boat but it is super sweet. It has a place of its own. But you won't be sitting beside your buddy comfortably cruising across a lake at 45mph. Definitely better replacement for a big ass kyak tho.👌
You are correct. It only matches the best boat in terms of how things are stored. It's definitely better than a kayak
@@TinyBoatNation it is an inspiration to us guys that a 90k fishing boat just isnt realistic. You make some bad ass boats. Super cool!
Incredible video!!!