Thank you , I'm building rn my first PC while it's midnight here in India. Getting specific help from yt feels like getting help from close friends whom you can call anytime
glad to hear you are taking your first steps into building your own PCs , you will save so much money and learn so much too , let me know if I can help in anyway , Good luck , and it would be cool if you could somehow share how your first PC comes out via pictures you may upload ,
@@noahsgamingpcshey man could you help me out? i just build my pc and the case come with these molex connectors the fans and light turns fine but the front i/o doesn't whenever i connect usb port with my phone it cause havoc in pc and sometimes crashes and shut off. There is a red which constantly blinking too I don't have hard drive don't know why it keeps blinking.
legend thanks man ... i didn't plug this in and i was trying to use the regular 4 pin plug on the motherboard but it wasn't working cos they are daisy chained from factory setup in a specific way and i was trying to use the little plug .. that plug u showed was the thing i needed man thank u~ pc case was NX200M
Thanks for this tutorial bud. First time build and my 6 case fans (which were pre installed in the case) were daisy chained like yours with molex connectors. Had me scratching my head. Only difference was the male (pin) connector is encased in white plastic. I bought a modular PSU so had to fish out the cable and connect it up. Problem and headache solved. 😊
One of the best explanations… gg bro I am building my first pc and its a bit tricky but you guys on youtube , helping with no cost is just 🔥🔥 Keep it up bro ❤
Thank you man you saved my life I thought My pc case is bad after this video I connected my molex cable and fan is working with rgb. This is my first time pc building.
hi, building a pc with an antec cx800 case, i plugged psu cable into the molex (the cable had 4 holes and the molex had 2 pins) and i plugged the molex into the SYS_FAN header, i powered on the pc and the cpu cooler and case fans arent working, but im prettu sure the rest of the pc is working because the ram lit up. Any help please i cant find anything online
I just swapped out my power supply to a better one and when i connected it all back up all of a sudden my RGB lights on my fans dont work. I hooked everything back up correctly and my fans are working but the RGB on the fans arent turning on anymore.. How weird, any ideas?
i hope you could reply. I just want to ask, if there's any requirement first for it to be able to work? I mean there should be an ssd connected first to be able it to work. since i have a fan with a molex cable but it doesnt turn on. im suspecting there should be an ssd connected first for it to be able to run
the SSD shouldn't affect if the fans move or not .... as the molex cable is for power only ....... you could test using another PSU , to rule out the situation that the PSU that you are using is functioning or not ,
@@noahsgamingpcs Im using an old case to be honest, a case with only 1 exhaust fan. Its just a test or temporary case since the parts i have is eligible for return/refund if there's a problem with one of the components (didnt yet buy a modern case since i dont find a good deal here in my place with free fans). So far there's no problem yet ive encountered all of them are recognized by the mobo (msi b550m pro) PSU also runs well (CM MWE v2 650w) but upon first boot up there's a tick sound for about 10mins but its gone afterwards didnt repeat. Im suspecting the fan is really old now its not really a molex black cable but a white one. In the generic psu i have it still working but need to manually turn the fan to work
I have exactly this montech case, daisy chaining the molex and then into the PSU (do they have to be chained in a specific order?) - my fans spin, but no light! Any ideas? I'm desperate here lol
no particular order needed , none whatsoever .............. if the lights not lighting up , inspect the fans and ensure they are firmly pushed in ..... when i did this , it fixed my problem with lights ,
It's been 2 years since the RGB of my PC stopped working but right now I found this video, did what he did and the RGB is now working and spinning by adjusting the molex connector on my PC. But there's a new problem right now lol the RGB and the Fan on my cooler is not working anymore, the RGB to the Intake has been fixed but the exhaust cooler RGB and Fan is not working anymore lmao.
I have the antec ax61 but it didnt come with molex, it has a sata cable. My psu has some molex but i dont know where they'd plug into the fans for power? Been stuck with this issue for almost a month.
Is there a way to connect these fans to motherboard. Because since they are directly connected to PSU, I can't control these fans like their speed or rgb colors etc. Is there some way?
I have Ant esport 1100 case with 4 pre-installed rainbow fans . Each fan has a molex and a 3 pin connector. Connected the fans using molex connector and they light up and run . Wonder where to connect the 3 pin connector. Should I connect it to Jrainbow headers on my msi mother board. And Are rainbow rgbs same as argb Thanks in Advance
I have a question, if we connect the molex fans to the psu like this, will the LED work? Because my motherboard does not have rgb headers and I am looking for fans that do not deal with the motherboard at all
Please help.. I have IG-MAX case with 3 argb fans connected together with molex like yours in this video.. however, when i connect them to molex from powersuply, they spin but argb wont work.. also there is a button for changing colours but nothing happens when i press that button..
most PSU(s) have this type of cable , I would recommend opening up your PC and check the PSU cables inside to see if they match up with this type of connector ,
I got montech same as the white one but 6 fans pure molex connectors i dont know where to they go on psu i have semi modular pcie 24 pin and 8 pin on but the rest say sata/hdd/floppy
you should be able to connect the molex connectors in series , connect them altogether , once you do that , you simply connect them to your PSU molex connector , that way they would be powered and it should work , Just like I did in this video ..... so your PSU should have a molex connector , you should be able to identify it , it looks like the molex connectors that are part of the 6 RGB fans that you've mentioned ,
@@noahsgamingpcs thanks it worked!!! Now i go another problem lol windows doesnt want to boot windows 11 from usb it goes to blue screen recovery smh but thanks!
My bottom fan is spinning but no lights. It HAD lights, but they went out after an hour. It’s a brand new prebuilt. Nothing was unplugged. This is driving me crazy. I just want my lights. It’s the MSI Codex R PC.
I’m highly confused, My Fans spin and their powered on but won’t light up yes I found the connector and everything. I just don’t know what to do. You explained it in the video but female and male I don’t see what connection I’m missing.
Hi sir do u have an email or phone I need some help I have some of these wires ur showing but it’s a lil more complicated then the wires ur showing ? Can I show u
unscrew the screws holding the fans onto the PC case itself , then unconnect the molex connectors that are in parallel , remove each individual fan accordingly and replace with the fan(s) you want to add to your pc case ,
see here - www.quora.com/What-should-I-do-for-an-error-which-says-922-front-USB-2-not-connected-in-an-HP-EliteDesk-800-G1-PC-which-enforces-you-to-press-F1-to-continue-to-boot-or-it-wont#:~:text=You%20either%20have%20a%20bad,boot%2C%20but%20ignore%20hardware%20errors.
And im a fucking dumbass Its been so frustrating for me becuase i recantly changed my power supply and Im going crazy trying to figure out what went wrong becuase my fans were not spinning I knew i left cables out.
make sure you push down on the fans , sometimes they get loose from the motor itself and therefore they can't spin , ensure they are nicely tight against the motor , this once happened to me and i fixed it this way , it is like you have to attach it again firmly ,
Thank you , I'm building rn my first PC while it's midnight here in India. Getting specific help from yt feels like getting help from close friends whom you can call anytime
glad to hear you are taking your first steps into building your own PCs , you will save so much money and learn so much too ,
let me know if I can help in anyway , Good luck , and it would be cool if you could somehow share how your first PC comes out via pictures you may upload ,
@@noahsgamingpcs I was going to share pics and the hiccups during the build but sadly my Twitter account got suspended because of a bad tweet
@@noahsgamingpcshey man could you help me out? i just build my pc and the case come with these molex connectors the fans and light turns fine but the front i/o doesn't whenever i connect usb port with my phone it cause havoc in pc and sometimes crashes and shut off. There is a red which constantly blinking too I don't have hard drive don't know why it keeps blinking.
very clear, straight forward and simple explanation , thank you man, seriously
n p
legend thanks man ... i didn't plug this in and i was trying to use the regular 4 pin plug on the motherboard but it wasn't working cos they are daisy chained from factory setup in a specific way and i was trying to use the little plug .. that plug u showed was the thing i needed man thank u~ pc case was NX200M
glad it helped out ......... GGs
Man you save me a 3 hrs of research a million thanks for you
so glad it helped ,
just setup my rgb fans thru this tutorial, my first full pc build tysm!
Glad it could help ya!
Thanks for this tutorial bud. First time build and my 6 case fans (which were pre installed in the case) were daisy chained like yours with molex connectors. Had me scratching my head. Only difference was the male (pin) connector is encased in white plastic. I bought a modular PSU so had to fish out the cable and connect it up. Problem and headache solved. 😊
Great to hear!
One of the best explanations… gg bro
I am building my first pc and its a bit tricky but you guys on youtube , helping with no cost is just 🔥🔥
Keep it up bro
❤
Did u know how to change rgb color on molex connector that just throughing cable to PSU... im so confused
Do you have the answer? BC i really want to change the color of the fans but I can’t
Tq brother, you really really really really helping me out❤❤❤
Happy to help
Well, everythings connectec properly and it has a light and its working but for some reason its not spinning how should i fix this? any idea?
did you find solution?
I’m looking for the solution to this also
@@b0nes1223same
Thank you man you saved my life I thought My pc case is bad after this video I connected my molex cable and fan is working with rgb.
This is my first time pc building.
glad to hear your success story , GGs
@@noahsgamingpcs bro so how I can Change my fans RGB colour
This fixed all my issues thank you man 🙏
No problem 👍
hi, building a pc with an antec cx800 case, i plugged psu cable into the molex (the cable had 4 holes and the molex had 2 pins) and i plugged the molex into the SYS_FAN header, i powered on the pc and the cpu cooler and case fans arent working, but im prettu sure the rest of the pc is working because the ram lit up. Any help please i cant find anything online
I just swapped out my power supply to a better one and when i connected it all back up all of a sudden my RGB lights on my fans dont work. I hooked everything back up correctly and my fans are working but the RGB on the fans arent turning on anymore.. How weird, any ideas?
did you fix it? For me only the back one gives RGB now
Same
@@nashvegaspimp have you case bring a white plug? use it and all the fans works after
Same the fans work but no rgb
After experimenting with cables for hours this feels like the most helpful thing in the world.
What about the 2 pin led cable to control the fans colors , where should i plug it ?
i hope you could reply. I just want to ask, if there's any requirement first for it to be able to work? I mean there should be an ssd connected first to be able it to work. since i have a fan with a molex cable but it doesnt turn on. im suspecting there should be an ssd connected first for it to be able to run
the SSD shouldn't affect if the fans move or not .... as the molex cable is for power only ....... you could test using another PSU , to rule out the situation that the PSU that you are using is functioning or not ,
..... question is there anything running / turned on .... is the CPU fan running ..... but your case fans are not ?!!
@@noahsgamingpcs Im using an old case to be honest, a case with only 1 exhaust fan. Its just a test or temporary case since the parts i have is eligible for return/refund if there's a problem with one of the components (didnt yet buy a modern case since i dont find a good deal here in my place with free fans). So far there's no problem yet ive encountered all of them are recognized by the mobo (msi b550m pro) PSU also runs well (CM MWE v2 650w) but upon first boot up there's a tick sound for about 10mins but its gone afterwards didnt repeat.
Im suspecting the fan is really old now its not really a molex black cable but a white one. In the generic psu i have it still working but need to manually turn the fan to work
Finally a usefull video that i needed
Glad it helped
@@noahsgamingpcs well help me once i need to disconnect it to change PSU it's seriously not coming out dies it have a mechanism of its stuck
I have exactly this montech case, daisy chaining the molex and then into the PSU (do they have to be chained in a specific order?) - my fans spin, but no light! Any ideas? I'm desperate here lol
no particular order needed , none whatsoever .............. if the lights not lighting up , inspect the fans and ensure they are firmly pushed in ..... when i did this , it fixed my problem with lights ,
Mine psu dont have a molex connecting is it possible to go from a molex to a 8 pin
Same with me 😢
It's been 2 years since the RGB of my PC stopped working but right now I found this video, did what he did and the RGB is now working and spinning by adjusting the molex connector on my PC. But there's a new problem right now lol the RGB and the Fan on my cooler is not working anymore, the RGB to the Intake has been fixed but the exhaust cooler RGB and Fan is not working anymore lmao.
I have the antec ax61 but it didnt come with molex, it has a sata cable. My psu has some molex but i dont know where they'd plug into the fans for power? Been stuck with this issue for almost a month.
Yo I FUCKINH LOVE YOU THX SO MUCH IT WAS LIKE 2 hours and finally ur video helped so much
so happy to hear this my friend ...... GGs
Life saver man. Thank you so much
Happy to help
Can you keep the RGB lights turned off somehow for static RGB fans that come with the case pre-installed?
Sir my case fans are lighting up but not spinning can i stilluse this method?
Is there a way to connect these fans to motherboard.
Because since they are directly connected to PSU, I can't control these fans like their speed or rgb colors etc.
Is there some way?
Unfortunately molex fans are non addressable
that's true
what @AmitKumar-mb7hn said , is true , not possible to connect to MB ,
@@noahsgamingpcs that's sad but thanks for the info
I have Ant esport 1100 case with 4 pre-installed rainbow fans .
Each fan has a molex and a 3 pin connector.
Connected the fans using molex connector and they light up and run .
Wonder where to connect the 3 pin connector.
Should I connect it to Jrainbow headers on my msi mother board.
And Are rainbow rgbs same as argb
Thanks in Advance
I have a question, if we connect the molex fans to the psu like this, will the LED work? Because my motherboard does not have rgb headers and I am looking for fans that do not deal with the motherboard at all
this could be helpful for you ....
ruclips.net/video/Wjh0KuvAipc/видео.html
oh myyy! iloveyouuuu! thanks!!
top lad noah
t y
Please help.. I have IG-MAX case with 3 argb fans connected together with molex like yours in this video.. however, when i connect them to molex from powersuply, they spin but argb wont work.. also there is a button for changing colours but nothing happens when i press that button..
How do i know If My powersupply has that cable? I got a be quiet system Power 10 450w
most PSU(s) have this type of cable , I would recommend opening up your PC and check the PSU cables inside to see if they match up with this type of connector ,
hey, excuse me, may i ask, i have 3 fans that use molex, the fans are rotating fine, but it doesnt light up with the rgb, do u know why?
Same problem, 😢 bro
I dont have a molex cable in my psu but i do have a sata cable it fit with the molex perfectly does it work?
My RGB fan not changing color (Ant esports ice 300 mesh ) can anyone help me please ❤
It only glowing one static rainbow color please help me
For that u need argb not rgb@@xozested01.yt_
Dam thanks sir, this really saved me and ma fans.
Thank you so much brother!
I got montech same as the white one but 6 fans pure molex connectors i dont know where to they go on psu i have semi modular pcie 24 pin and 8 pin on but the rest say sata/hdd/floppy
you should be able to connect the molex connectors in series , connect them altogether , once you do that , you simply connect them to your PSU molex connector , that way they would be powered and it should work , Just like I did in this video ..... so your PSU should have a molex connector , you should be able to identify it , it looks like the molex connectors that are part of the 6 RGB fans that you've mentioned ,
@@noahsgamingpcs thanks it worked!!! Now i go another problem lol windows doesnt want to boot windows 11 from usb it goes to blue screen recovery smh but thanks!
I have a hp elitedesk 800 g1 sff motherboard and neither has Molex Please help is there a way I can get it to work
Thank you for this video!
You are so welcome!
Thanks got it working❤
I am glad to hear that
Legend 🙌🙌
t y s m
bro i have the same and it really works but can please how can i change the RGB colors ???
on this particular model you cannot change the colors because there is no built in control for doing so ,
I have AZZA fans and also use Molex but only the LEDs turn on but not the fans itself
thank you ! you helpd for me !
Glad it helped!
my fans arent lighting up
Same
i connected cables correctly. My molex fan spins but it doesn't light up.
yeah same bruhg did you fix it??
Bro saved my fans
happy to hear that ,
My bottom fan is spinning but no lights. It HAD lights, but they went out after an hour. It’s a brand new prebuilt. Nothing was unplugged. This is driving me crazy. I just want my lights. It’s the MSI Codex R PC.
I still have same problem. And I dont know how to fix it
@@edinkrcikovic2984 Mine got fixed, I just had to replug the cables in and it’s worked perfect ever since.
I’m highly confused, My Fans spin and their powered on but won’t light up yes I found the connector and everything. I just don’t know what to do. You explained it in the video but female and male I don’t see what connection I’m missing.
Where to input the plug which is used to change rgb
Are there any controllers to control these fans?
not in this particular model of PC case ,
thank you so much
Welcome 😊
How many fans can i connect in a power supply molex connector?
Thank you. Naww I understand
You’re welcome 😊
My molex have 2 pin only it's that okay?
did u got some answers ?
@@Just0mee no until now i cant use that thing im scared
@@ehhh9912 💀💀💀
my fnas are spinning but leds are not glowing not sure whats the reason.
How do I connected my fan what cord do I need for led rgb
Omggg thank you sooo much dude
Any time
I can’t access it coz there a lot of wires any advice?
where do i find that cable??
power supply
How can we control the lighting ?
click on reset buttom...
You had male and female molex wrong, the one with pins is male and the one with ports(holes) is female
thanks for clarifying
Hi sir do u have an email or phone I need some help I have some of these wires ur showing but it’s a lil more complicated then the wires ur showing ? Can I show u
Right so I’ve done that plugged it in and no lights come on
How can turn off the lights of the fans ?
I have everything plugged in. All the 4 fans work, but only the back one turns RGB on. Can anyone help me here?
Awesome!
Thank you! Cheers!
My problem is I don’t have that little piece the same style as that
i love you!!!!
How can i remove it bacause i want to change my old pc fan
unscrew the screws holding the fans onto the PC case itself , then unconnect the molex connectors that are in parallel , remove each individual fan accordingly and replace with the fan(s) you want to add to your pc case ,
mine is rgb is on but the fan is not spinning
how do unplug them?
This is gold
My fans are working but my rgb is not idk how to fix it
Fixed?
no i just bought new ones @@m1chael649
My RGB LEDs worked all the time but now dont I tried this didnt worked for me. I think its other problem
Correction, male side has poles and female side has holes….hmmm
😂
t y ..... yeah my bad , LOL
heheeee
Gracias pa
Earned a like sub and comment from me thank u
thank you so much
The problem is that the fans dont light up even after connecting them to the psu
My Fans Are working But RGB isnt please help
I am facing a error 911 FRONT USB 1 NOT CONNECTED AND 922 FRONT USB 2 NOT CONNECTED 😢😢😢😢
see here - www.quora.com/What-should-I-do-for-an-error-which-says-922-front-USB-2-not-connected-in-an-HP-EliteDesk-800-G1-PC-which-enforces-you-to-press-F1-to-continue-to-boot-or-it-wont#:~:text=You%20either%20have%20a%20bad,boot%2C%20but%20ignore%20hardware%20errors.
and see here too - community.spiceworks.com/topic/764962-hp-800-g1-desktop-error-922-front-usb-not-connected
And im a fucking dumbass Its been so frustrating for me becuase i recantly changed my power supply and Im going crazy trying to figure out what went wrong becuase my fans were not spinning I knew i left cables out.
ONLY SAY NO TO MOLEX TO SATA CABLES👍
Não entendi nada língua estranha da poha
spinning but not lighting
i’ve been trying for the last 3 days and it still hasn’t worked sadly
you may want to check the molex pins , maybe they are bent or something ,
I did all of this and my fans still don’t spin 😢
make sure you push down on the fans , sometimes they get loose from the motor itself and therefore they can't spin , ensure they are nicely tight against the motor ,
this once happened to me and i fixed it this way , it is like you have to attach it again firmly ,
sir, my PSU doesnt have the connector for a Molex and i dont know what to doo