My vacuum hose on my Miele was clogged near the handle - after watching a couple videos on how to remove the handle - i thought this is way too complex - has to be a simpler solution - and reversing the hose worked perfectly - thank you so much.
My Meile wasn’t switching on and the moment you said getting too hot it turned back on in the other room, it must have heard you. And yes it got to hot using it outside in the sun. Good info on proper use of the vacuum I was beginning to think I was going have to take it to the service centre 😑
You were the first video I found. I was freaking out but your explanation that the Miele will safety-off when overheated made me calm again. My Kona C3 is working again. Thanks, dude.
Thank you! I had tried so many things but not swapping the hose around and suctioning. I had the vacuum in the car ready to go to the vacuum tech. Took it back out of the car and tried the last option. It worked!!! Thank you!!
Thank you man! The reverse suction found a cap that was stuck....i was buying filters and everything. Although I did watch your filter video and I am glad I bought new ones because it is more for hepa.
Thank you for posting this and for the comment at the end about a service person possibly using an air compressor to unblock the hose. We have an air compressor, so that will be my second attempt should the reverse suction not work.
Thank you. This worked on my cx1 blizzard to clear a clog in the top part of the handle after it goes through the hose. Make sure you turn the power onto max
Thank you for your informative video--thanks to your excellent tips I got my Miele back up and running :) I will be purchasing from you in the future!! :)
someone had one on the curb I brought it home and it does this. it appears they cleaned up a massive flour spill (kitchen) as it coated the inside of the main hose..so I suspect it's inside the motor some-how - the chamber where the bag is in .. is relatively clean I will spend a few minutes on it to see if I can get it to operate normally - if not it will go back in the trash. it turns on sometimes..and then just shuts off.
Sorry to hear that Dionne. Try cleaning it out as much as you can. If the dirt is gone into the motor though, it may be a good idea to take it in to a Miele dealer close to you for service.
Just the part about the vacuum turning itself off for 30 mins when it overheats was enough information to just about buy enough time to re-test it before my wife ordered a new one, it was touch and go though!
Hey! The light on my Miele Triflex HX1 Pro vacuum isn't working properly. When I turn the machine on the light goes on for like 1 second but then turns off. The suction is working as usual. Please help me :)
Hey Avocado Lover. That is the first time we have come across this issue before. Not sure where you are located or where you purchased it, but your vacuum should be under warranty if you purchased it brand new from a Miele authorized dealer. Maybe take it back and have them take a look. There is a chance the whole head should be changed.
Thank U for your answer! Today I discovered that the head of the brush isn't spinning as well... The suction works, but no spinning and no light. I'm from Germany - probably the country with most Miele specialists haha I also had the fear that the whole head needs to be replaced :( Thank U anyway
If the vacuum is not turning on because of a clog, it means the motor has overheated. If you wait about an hour, when the motor cools down, it should turn back on, assuming the motor is not dead. But ya, if its just not turning on at all, there is a bigger problem than just the clog.
I have an issue with my miele cat and dog light. Even if I change the bag, almost after the first vacuuming the light goes red again indicating the bag is full while it isnt. It's getting me frustrated as I feel it's not sucking properly. Could it be a cloging issue? Do you have any idea as I don't seem to find anyone else mentioning this? Thank you!
Hi, it sounds like you have a clog in the hose. try taking the hose off the canister and see if the indicator still goes across all the way. if not, then there is likely a clog in the hose. reverse the air flow as shown in the video. that should help, otherwise you might want to take in for service.
If the vacuum is not turning on because of a clog, it means the motor has overheated. If you wait about an hour, when the motor cools down, it should turn back on, assuming the motor is not dead. But ya, if its just not turning on at all, there is a bigger problem than just the clog.
Hi Paul, since Im not sure exactly which model you have, this is a guess, but I think that sounds like an electronic board problem. I would take it for service to a Miele authorized center.
Well, yes, if the reason the vacuum has turned off and isn't turning on is because a clog has triggered the heat sensor on the motor, then if you wait 20-30 min and try again, it will turn on. If the vacuum isn't turning on because the motor is ceased, for instance, then ya, this obviously wont work.
Problem solved in TWO seconds. Thank you for posting a very helpful video.
*THANK YOU SO MUCH!!! You saved me an expensive and time consuming trip to the serviceman!*
thank you i thought my miele was dead :) but i had a plastic spoon caught in the neck. it came back to life :) appreciate the money you saved me :)
My vacuum hose on my Miele was clogged near the handle - after watching a couple videos on how to remove the handle - i thought this is way too complex - has to be a simpler solution - and reversing the hose worked perfectly - thank you so much.
My Meile wasn’t switching on and the moment you said getting too hot it turned back on in the other room, it must have heard you. And yes it got to hot using it outside in the sun. Good info on proper use of the vacuum I was beginning to think I was going have to take it to the service centre 😑
Thank you for solving my issue! Never knew how to do the reverse airflow and it turns out something was stuck! Much appreciated!
Thank you!!!! I just unclogged my vacuum and saved $$$.
You were the first video I found. I was freaking out but your explanation that the Miele will safety-off when overheated made me calm again. My Kona C3 is working again. Thanks, dude.
Thank you! I had tried so many things but not swapping the hose around and suctioning. I had the vacuum in the car ready to go to the vacuum tech. Took it back out of the car and tried the last option. It worked!!! Thank you!!
Thanks so much! This solved my problem and saved me a major headache!
Thank you Rod, for the video on trouble shooting Miele Vacuum that cut off and will not turn on. The video was extremely helpful!!
Glad it helped. Thanks
Thank you man! The reverse suction found a cap that was stuck....i was buying filters and everything. Although I did watch your filter video and I am glad I bought new ones because it is more for hepa.
Thank you that worked!!!! There was a marker stuck in there with all kinds of dust backed up around it.
Glad it helped!
Outstanding! Really clear and helpful guidance
Thank you for posting this and for the comment at the end about a service person possibly using an air compressor to unblock the hose. We have an air compressor, so that will be my second attempt should the reverse suction not work.
Thanks. While seeing the video, I turned on (after about 10 min) and it worked.
Blocked hose. Fixed in a minute. Thank you!
Fortunately I had my old Miele, still working. Reversed the airflow on the newer hose, caught a pen! Now just waiting for the motor to cool down.
So glad u was the first video too. Well done xx
Worked for my Miele s4212 canister vacuum. Thank you.
If there is no red light indicator when hose is lifted but then goes all red when I put it on floor what does it mean? Thanks
Here is another video explaining that ruclips.net/video/WeROC5wpPlE/видео.html
Thanks! It was the one out of ten. Solved the problem in minutes.
Excellent you made it easy I just followed your instructions and it started thank you very much
Of course I found a clog. So I’d like to send a vote of thanks for taking the time to put the video up.
Thank you so much. Swapping the hose around helped!
Thank you. This worked on my cx1 blizzard to clear a clog in the top part of the handle after it goes through the hose. Make sure you turn the power onto max
Brilliant, simple fix! Thank you for the video and this technique as I frequently suck up cat toys.
Thank you for your informative video--thanks to your excellent tips I got my Miele back up and running :) I will be purchasing from you in the future!! :)
Wonderful!
someone had one on the curb I brought it home and it does this. it appears they cleaned up a massive flour spill (kitchen) as it coated the inside of the main hose..so I suspect it's inside the motor some-how - the chamber where the bag is in .. is relatively clean I will spend a few minutes on it to see if I can get it to operate normally - if not it will go back in the trash. it turns on sometimes..and then just shuts off.
Thank you so much! My vacuum stopped working and the red light came on. I followed your directions and out came a cat toy.
Thank you! Video just helped me clear my vacuum hose
Thank you for your informative video!! I think your a genius and very nice person,, problem fixed..
Thank you very much, the reverse thing did the trick
The bag on my miele c3 wasn't in place properly and I think heaps of dirt got sucked into the motor. Is it fixable or should I just buy a new one?
Sorry to hear that Dionne. Try cleaning it out as much as you can. If the dirt is gone into the motor though, it may be a good idea to take it in to a Miele dealer close to you for service.
Just the part about the vacuum turning itself off for 30 mins when it overheats was enough information to just about buy enough time to re-test it before my wife ordered a new one, it was touch and go though!
Wow u jus saved my money Thanku it was exsactly as u sed. An I Thanku soooomuch it was only 3 yr old
Worked like a charm!!! thank you!
Just did this and it worked, thanks so much!
Glad it helped!
Thanks this really helped with our clogging problem!
Thank u = it worked! The video was very helpful
Thank you so much! :D I had no idea it was okay to do that! Now I can vacuum again!!! :D :D D: Keep up the amazing videos! :D
It worked! Thank you
miele vacuum cleaner red triangle light. How do I fix it?
Thanks
A number of things can cause that David, Best is to take it to Miele authorized service center close to you.
Hey! The light on my Miele Triflex HX1 Pro vacuum isn't working properly. When I turn the machine on the light goes on for like 1 second but then turns off. The suction is working as usual.
Please help me :)
Hey Avocado Lover. That is the first time we have come across this issue before. Not sure where you are located or where you purchased it, but your vacuum should be under warranty if you purchased it brand new from a Miele authorized dealer. Maybe take it back and have them take a look. There is a chance the whole head should be changed.
Thank U for your answer! Today I discovered that the head of the brush isn't spinning as well... The suction works, but no spinning and no light.
I'm from Germany - probably the country with most Miele specialists haha
I also had the fear that the whole head needs to be replaced :(
Thank U anyway
Fine if the motor runs but ours just won't start working fine yesterday. Won't start today what's wrong in this case
How do you reverse the flow if the hoover doesn't turn on
If the vacuum is not turning on because of a clog, it means the motor has overheated. If you wait about an hour, when the motor cools down, it should turn back on, assuming the motor is not dead. But ya, if its just not turning on at all, there is a bigger problem than just the clog.
Thank you!! I thought my vacuum was toast.
Thank you, just fixed my vacuum
Glad I could help
Thanks for your help!
I have an issue with my miele cat and dog light. Even if I change the bag, almost after the first vacuuming the light goes red again indicating the bag is full while it isnt. It's getting me frustrated as I feel it's not sucking properly. Could it be a cloging issue? Do you have any idea as I don't seem to find anyone else mentioning this? Thank you!
Hi, it sounds like you have a clog in the hose. try taking the hose off the canister and see if the indicator still goes across all the way. if not, then there is likely a clog in the hose. reverse the air flow as shown in the video. that should help, otherwise you might want to take in for service.
It worked!
Thank you rod...you solved my problem
Thank you so much for the info
Thank you! This helped me unclog my Miele!
Very helpful, thanks
Thank you!
If there is a hose clog--I can't reverse the air flow--If the vacuum won't turn on.
If the vacuum is not turning on because of a clog, it means the motor has overheated. If you wait about an hour, when the motor cools down, it should turn back on, assuming the motor is not dead. But ya, if its just not turning on at all, there is a bigger problem than just the clog.
If i turn on my Miele cat and dog vacuum it losses power. So If i turn on full power he automatically go to his lowest power
Hi Paul, since Im not sure exactly which model you have, this is a guess, but I think that sounds like an electronic board problem. I would take it for service to a Miele authorized center.
thank youuuu!
YOU ROCK!
Thank you!!
I'm just downvoting for that ear piercing ding at the end of the video.
So let me get this straight. The way to fix my vacuum that won't turn is to turn on the vacuum to do this clog test
Well, yes, if the reason the vacuum has turned off and isn't turning on is because a clog has triggered the heat sensor on the motor, then if you wait 20-30 min and try again, it will turn on. If the vacuum isn't turning on because the motor is ceased, for instance, then ya, this obviously wont work.