@@Fixflex1 RAM communicates with the CPU through the memory controller on the CPU. Most modern motherboards have two 64-bit (total 128-bit) channels between the CPU and memory. In a single-channel configuration, only one of them is functional. This limits memory throughput to the rated speed of the slowest single RAM module installed. In dual-channel memory configurations, the memory controller uses both channels to communicate with the CPU, essentially doubling the bandwidth. But what about multi-channel configurations? Technically, quad-channel systems exist, but they’re mainly found on server-centric and exotic boards. For most people, multi-channel means dual-channel memory.
Supper Video . Habe auch einen Acer Orion PO3-600 , ist auch ein kleines mini Gehäuse . Das Problem , ist meist der airflow im Gehäuse . Vorne muss offen sein , mit 2 , oder besser drei lüfter . Und hinten einen , und oben auch 2 oder 3 Lüfter , dann läuft der pc , viel besser . Lüfter sind immer recht einfach zu wechseln . Mann hätte auch den CPU Kühler tauschen können . Dabei muss das Mainboard , vom gehäuse raus . Bringt auch schon was . Also mein acer pc , da wurde schon alles von grund auf erneuert , angefangen vom pc Gehäuse . Generell , cool das , du das so zeigst ! Danke .
Good video. With the bigger power supply and GPU I'd be worried abut case heat buildup. I did similar mod to my TC-895 but added a rear case exhaust fan. There's a plug on the mother board for an extra fan. It plugs in and works (speed of new fan changes the same as the CPU fan speed).
I am trying to upgrade my power supply in my Acer Nitro desktop. I have taken the four screws out of the back as you did but the power supply does not come free. You seemed to have the same issue in this video. The video jumped ahead as your power supply came free. What was the trick to get it loose. Since the power supply is at the top of the case I am guessing there is something on the top that is helping keep it from sagging. There is a rubber block between the underside of the top of the case and the poser supply. Is it glued in place and holding the power supply up? Thanks for any help you can provide.
I've hyped myself up for trying this on my own tower on Weds when my card arrives, I'm not techy, just a bit web interface-y, so fingers crossed I don't accidentally break anything 🤞
I have a Acer aspire TC-710 and replaced the Power with a 500 Watt and Graded Up the RAM to 16Gb.now just Need a new Gtx.Would the GTX 1650 work in my pc? It is small and i fear that the place would Not be enough
I upgraded my acer tc 1780, it’s the same case. You will need to add a cooling fan on the rear of the case. It’s easy to do there is a connector on the motherboard, without it GPU temps were over 90 and CPU was throttling.
This works but... If you went to the trouble to install a new psu you really should have gotten a better gpu than a 1650, or have gotten a regular gtx 1650 that doesn't require external power and not have upgraded the psu. Also there is very little room for the card to breathe.
Hello,I'm here because I'm trying to pull off the stock graphic card from my pc but it doesn't seem to work even pushing down the PCIe lock pin...Should I hear a click moving it?It's not very clear
Disconnect all power from the computer first. Hold your power button on the case for 10 seconds to dissipate lingering charge. Open the case, noting the way it came apart. Disconnect the power cable from the GPU. Helpful tip. The case of the computer has 3 PCIe slots at the rear. Your GPU has a bracket attached to it where your display ports are (HDMI, DVI, Display Port etc). There is a bracket attached to the computer case chassis that should have screws or a latching mechanism connected to the case’s PCIe slots. Undo this mechanism and disengage it. You should then be able to depress the plastic PCIe slot latch on the motherboard where the GPU connects to. Make sure to use a softer tool like plastic or rubberized plastic if you need it to reach down there. Using anything metal can be risky, because if you slip. You risk damaging your motherboard and causing a short, which will case your computer to either not boot anymore or worse. After depressing the latch, firmly but carefully lift the GPU out of the motherboards PCIe slot. Better to use two hands to keep the GPU from rocking or twisting and damaging the GPU goldteeth. Or worse, the GPU chip layers itself (aka PCB) Hope this helps!!
What graphics can I put on my pc Acer Aspire TC-1760-UA92 Desktop | Procesador Intel Core i5-12400 de 6 núcleos de 12 GB 3200 MHz DDR4 | 512 GB NVMe M.2 SSD | 8X DVD | Intel Wireless Wi-Fi 6 AX201 | Bluetooth 5.2 | Windows 11 Home
I wouldn't recommend changing the case because almost all Office computers will not come with a Standard motherboard. If you want use "Pcpartpicker" to look at making a computer because it can automatically tell you what will work with the parts you've chosen. Buying a used office computer and gutting it for the CPU, RAM, Storage, and fans can bring the total cost of the computer down though.
Que grafica le puedo poner mi pc Acer Aspire TC-1760-UA92 Desktop | Procesador Intel Core i5-12400 de 6 núcleos de 12 GB 3200 MHz DDR4 | 512 GB NVMe M.2 SSD | 8X DVD | Intel Wireless Wi-Fi 6 AX201 | Bluetooth 5.2 | Windows 11 Home
Bien joué, c'est intelligent... Le refroidissement sur un PC de bureau est merdique, t'as carte graphique va durer 1 année et cramer, mise sur un PC gaming au moins tu pourras modifier plus tranquillement.
Adding another stick of ram to allow dual channel ram mode would be an affordable upgrade too!
what is dual channel ram mode
@@Fixflex1 RAM communicates with the CPU through the memory controller on the CPU. Most modern motherboards have two 64-bit (total 128-bit) channels between the CPU and memory. In a single-channel configuration, only one of them is functional. This limits memory throughput to the rated speed of the slowest single RAM module installed.
In dual-channel memory configurations, the memory controller uses both channels to communicate with the CPU, essentially doubling the bandwidth. But what about multi-channel configurations? Technically, quad-channel systems exist, but they’re mainly found on server-centric and exotic boards. For most people, multi-channel means dual-channel memory.
Wow thank you brother ✝️ typically tutorials don’t work for me but this time it did 👍
Supper Video .
Habe auch einen Acer Orion PO3-600 , ist auch ein kleines mini Gehäuse . Das Problem , ist meist der airflow im Gehäuse . Vorne muss offen sein , mit 2 , oder besser drei lüfter . Und hinten einen , und oben auch 2 oder 3 Lüfter , dann läuft der pc , viel besser .
Lüfter sind immer recht einfach zu wechseln .
Mann hätte auch den CPU Kühler tauschen können . Dabei muss das Mainboard , vom gehäuse raus . Bringt auch schon was .
Also mein acer pc , da wurde schon alles von grund auf erneuert , angefangen vom pc Gehäuse .
Generell , cool das , du das so zeigst ! Danke .
Good video. With the bigger power supply and GPU I'd be worried abut case heat buildup. I did similar mod to my TC-895 but added a rear case exhaust fan. There's a plug on the mother board for an extra fan. It plugs in and works (speed of new fan changes the same as the CPU fan speed).
What're the dimensions on the rear fan?
Can you post a video or maybe say I place with the instructions to do this? Please?
I am trying to upgrade my power supply in my Acer Nitro desktop. I have taken the four screws out of the back as you did but the power supply does not come free. You seemed to have the same issue in this video. The video jumped ahead as your power supply came free. What was the trick to get it loose. Since the power supply is at the top of the case I am guessing there is something on the top that is helping keep it from sagging. There is a rubber block between the underside of the top of the case and the poser supply. Is it glued in place and holding the power supply up? Thanks for any help you can provide.
I've hyped myself up for trying this on my own tower on Weds when my card arrives, I'm not techy, just a bit web interface-y, so fingers crossed I don't accidentally break anything 🤞
How'd it go
I have a Acer aspire TC-710 and replaced the Power with a 500 Watt and Graded Up the RAM to 16Gb.now just Need a new Gtx.Would the GTX 1650 work in my pc? It is small and i fear that the place would Not be enough
Can you do a tutorial on how to replace a fan with that case
Can you do it yet?
I upgraded my acer tc 1780, it’s the same case. You will need to add a cooling fan on the rear of the case. It’s easy to do there is a connector on the motherboard, without it GPU temps were over 90 and CPU was throttling.
Not all cases are the same. My tc-1780 does not support a full width evga. So pissed off with Currys.
@@gbtyrrell9548 GTX1650 fits in 2 slots and is no issue in the TC1780. If you opt for a better GPU you may have issues I have not tested it.
Do you uninstall the original GPU drivers first and download the new drivers before Installing the GPU card?
There is no graphics card included on the original setup of the pc, I just installed the driver for the new GPU card.
@@ConcernCriticcan I install a 4060 in their?
This works but... If you went to the trouble to install a new psu you really should have gotten a better gpu than a 1650, or have gotten a regular gtx 1650 that doesn't require external power and not have upgraded the psu. Also there is very little room for the card to breathe.
Why you didnt show the performance
Do you really need to upgrade the psu even you are using an Lp gtx1650 i have a 1750 version of the pc
Would something 30 watts need a new power source?
Hello,I'm here because I'm trying to pull off the stock graphic card from my pc but it doesn't seem to work even pushing down the PCIe lock pin...Should I hear a click moving it?It's not very clear
Disconnect all power from the computer first. Hold your power button on the case for 10 seconds to dissipate lingering charge.
Open the case, noting the way it came apart.
Disconnect the power cable from the GPU.
Helpful tip. The case of the computer has 3 PCIe slots at the rear. Your GPU has a bracket attached to it where your display ports are (HDMI, DVI, Display Port etc). There is a bracket attached to the computer case chassis that should have screws or a latching mechanism connected to the case’s PCIe slots. Undo this mechanism and disengage it.
You should then be able to depress the plastic PCIe slot latch on the motherboard where the GPU connects to. Make sure to use a softer tool like plastic or rubberized plastic if you need it to reach down there. Using anything metal can be risky, because if you slip. You risk damaging your motherboard and causing a short, which will case your computer to either not boot anymore or worse.
After depressing the latch, firmly but carefully lift the GPU out of the motherboards PCIe slot. Better to use two hands to keep the GPU from rocking or twisting and damaging the GPU goldteeth. Or worse, the GPU chip layers itself (aka PCB)
Hope this helps!!
adquiri una tc-865 le puse psu y una rx 580 pero no me da imagen ni a bios, algo tengo que hacer? solo me funciona con la integrada
do we really need to replace the power supply? sorry I just dont know how pc works
Yeah you do because the stock power supply doesn’t have enough volts to give the gpu power
No you don't if you get a 1650 that doesn't require external power
Need to check, if your GPU reguirs external power.
Do they sell gaming motherboards that fit into that desktop?
After you insert new power supply one cable goes into GPU right? Is it a must?
Yes it is
What other Brand of power supply can I use ?
its mini case?
what size is the mobo??
I was curios if a normal size GPU could fit inside and if not why?
because the case is hardly 20cm in width
What graphics can I put on my pc Acer Aspire TC-1760-UA92 Desktop | Procesador Intel Core i5-12400 de 6 núcleos de 12 GB 3200 MHz DDR4 | 512 GB NVMe M.2 SSD | 8X DVD | Intel Wireless Wi-Fi 6 AX201 | Bluetooth 5.2 | Windows 11 Home
rx 6600 with a adapter
@@GoldAnxnymouswhat adapter
@@GoldAnxnymousplanning on doing the same thing
What type of psu form is that?
So, CD won't be use ?
What games can it run now?
What's the processor?
you can help me I need size of the mother board because I would like to change the
house of the pc
I wouldn't recommend changing the case because almost all Office computers will not come with a Standard motherboard. If you want use "Pcpartpicker" to look at making a computer because it can automatically tell you what will work with the parts you've chosen. Buying a used office computer and gutting it for the CPU, RAM, Storage, and fans can bring the total cost of the computer down though.
Hi this graphic card is gddr5?
it's a GDDR6.
Will a 1660 fit in a acer ?
Que grafica le puedo poner mi pc Acer Aspire TC-1760-UA92 Desktop | Procesador Intel Core i5-12400 de 6 núcleos de 12 GB 3200 MHz DDR4 | 512 GB NVMe M.2 SSD | 8X DVD | Intel Wireless Wi-Fi 6 AX201 | Bluetooth 5.2 | Windows 11 Home
T600 4G，T1000 8G。T600≈1650，T600=40W
Bien joué, c'est intelligent...
Le refroidissement sur un PC de bureau est merdique, t'as carte graphique va durer 1 année et cramer, mise sur un PC gaming au moins tu pourras modifier plus tranquillement.
does it void warranty on acer aspire tc 895
no heckler
you can't change the PSU on the 895 as they changed the plugs from 885 , currently no aftermarket compatible PSU for the 895