J-R Programmer Bootloader Mode Recovery
HTML-код
- Опубликовано: 21 авг 2024
- This video show how to recover your J-R Programmer from boot loader mode.
If your J-R Programmer is not showing in Jrunner and its only got a red light on then watch this video and I'll show you how to fix it.
All products are purchased from www.xconsoles.com the best official Xecuter retailer in the USA.
Video brought to you by www.epicconsole.com
10 years later this is still amazing lol. Thanks!
After 12 years bro thanks 🤣
can some one over here whit more knowledge that me give me a solution for my problem ? i tried every thing from changing cable to changing usb port to changing even pc and os, but my jr programmer dont come back whit the green light. i only see the red light , and on windows is says input usb device whit a yellow triangle. when i do the trick to switch it back to the normal mode and it actually works but the fact is that when it actually loads up in normal mode all the light are off , i am just able to ear the device sound on the pc but the jr programmer only shows the red light in bootloaer mode, in normal mode all the lights are off.
Thanks JUST what I needed!!!! 😀
Thank you very much for your video you saved my butt I thought I had to buy a new one
mine sais device not found
when I click update it says device not found
go to 1:18 if you want to get to the point
omg thannk you soo much. i cant express how gratefull i am! when i saw that red light that wouldnt dissapear my heart stopped XD. thank you again!
I still have the red light on it, I did everything what you did and still it's flashing red. Help please :(
It works Kiel! Thanks again!
THANK YOU THANK YOU!!!!!
Thank you so much!!! I was stuck, i thought my jrp2 went bad.
YOur welcome. Glad my video helped.
I LOVE YOU!
My hero
Tanks !!
My JR Programmer is giving me the same thing that Bryce said, it's not even showing up in Device Manager even after un plugging & re plugging ... what to do ...
Thank you soooooooo much -- i dont know how to thank you omg i thought i killed my JR V2
Please Help i Have a few problems! I tried on 2 separate computers and get the same thing but on the first computer the JR Programmer V2 was recognized and installed then i got Problem 3 (at the bottom)
1) My JR Programmer V2 was flashing red and green the other day but now the lights com on then go off.
2) When i plug the jr programmer V2 into the computer (after the red and green lights are suppose to be on but arent) i here the tone but then the JR Programmer V2 does not show up in Device Manager.
3) When i open J Runner i get a connection Error and then a message saying program is closing, i run it as administrator and run it with windows 8 compatibility like it tell you to. Please Help ASAP thank you so much for reading and i hope you have a great day!😊
Thank you bro :)
Thanks dude👍
Cara é ninja demaissss! like
hi there, i have just recieved my jr programmer v2 and upon plugging in to my laptop i am greeted with a red light, have tried to reset the device but still shows a constant red light, i cant even install the drivers and jrunner shows no device found and help will me much appreciated cheers
That's interesting. I'm not sure how to fix it when stuck in bootloader without having drivers installed first.
Yeah exactly thanks any ways m8
well, I think you need this anymore, but anyone that have same problem - red light without drivers - you can go ahead and do same procedure with J-Runner as shown in video. in my case I got it fixed
+Keil423 hi! jr v2 is not suitable?
Flash Config: 0xC0462002
C0462002This flash config belongs to Corona 4GB.
As of now you can't read it via SPI.
Please use an SD card reader/USB tool.
thanks man!
help.. i cant reprogram my coolrunner !! i have jr programer and windows 7 32 bits ... instal the drivers ok but no flash ther coolrunner why? when push Program CR dice Device not found. :( help my
Thanks
No problem.
Thanks :)
It fixed the flashing red light, but now whenever i try to read the nand, it says:
Flash Config: 0x00000000
Can not Continue
Can not continue
The console itself needs power (don’t power it on, just plug in the power supply).
Thks!!!
now i get a green light but it says device not found
muchas gracias broo
Your welcome.
thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Your welcome. Glad I could be of help
I has problem jr programmer when i click tool up-fr press then press prv2 intzailing straight away off no green light. Please can help me?
now work thank you keil423
I love you
When I open the firmware it says Device Not Found. Please help bro!
PB_Nerd did you ever fix it?
bro how did u get the Jr programmer I can't find how to get it
What if I do get a green light and my computer or laptop both doesn't recognize it? I've tried both. Switches were away from the reset button
Double check that your drivers are installed properly. Aside from that you could try to uninstall and re install it.
If the green light is on then your not in bootloader mode so it's either drivers, bad cord, bad plug or bad programmer.
+Keil423 I just got the chip today. So far the only thing i've done was take it out of the box, solder the wires to the points, plug in 360 power , plug it into my computer with the switches turned away from the reset button .. I look in device manager and it doesn't show anywhere. Do you mean I have to install drivers to my computer so it will read it in device manager?
+Keil423 I just got back from walmart with a new usb cable and that was the problem. Now my computer is recognizing the jr programmer. Thank you so much
+ShadowModding360 your very welcome. I'm glad I could help.
+Keil423 I'm running into more problems. When I click "dash version" this shows up .. Checking Console..
Version: 10
Flash Config: 0x00A23020
Error: 258 reading block 0
Error: 218 reading block 1
Error: 210 reading block 2
Error: 210 reading block 3
00A23020
Is this bad soldering?
Issue now is i receive this in the dialog:
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Windows 7 32 bit