Awesome stuff, I normally write over the last good dump I have on hand to unbrick a console, I haven't done the ECC only method. Got any more details on the NAND reading/writing switch you briefly showed? I know that isn't for a Demon setup but I'm not sure if that's from a Cygnos set or not.
@@gringbel Not much you can do in that case unless you have the original retail nand dumps from the console. Most RGH sellers provide them on a disc or as a download.
Thanks @@MODDEDWARFARE if thats the case, i cannot revive my nephews 360 anymore. Feeling so sorry for him. Anyways, thanks for the reply here. Been watching closely to ur new vids if ever 5.55 is ready to jb. More power to you.
Yo huge fan and love what u do! Love jailbroken and RGHs I remember when mw2 1.11 was out and was first time I saw mod menus, reminds me of my childhood, I personally hope to see them on PS4 some day even tho they hit the community hard, keep it up man!! :))
Thank you very much for the video! I got an Xbox 360 E with the error E79, it had a mod chip, the previous owner said it failed after an update. Your video helped me to get confidence that I was on the right track with my fix, I bought a JR Programmer and got J-Runner to run on an old Windows7 laptop and I read the NAND successfully and wrote back Xell which printed the CPUkey and the DVDkey on the TV, I used the CPUkey to create an XeBuild and I successfully wrote that into the NAND and now my Xbox 360 E works again! J-Runner's latest version looks a bit different now than when you made this video but it helped me get around still. Thanks again!
my rgh keeps blackscreening after the 360 loadup and than turning off what do i do and how do i bypass - edit I figured out how to fix download a good file that has a launch.ini than put it on a usb and put it in the rgh
I was RGHing for the first time and the mistake I did was that I had the wrong dash version selected when I was trying to flash the hacked image. Im gonna try this. Thanks.
I'm helping a guy who has an rgh Trinity 360, error E82 but loads into Xell for him. I'm a bit confused by what it means that Xell can start but not the dash
The yellow wire is actually the ground and with a massive motherboard like this it has a massive ground plain so your heat gets sucked away fast with massive ground points
My RGH just suddenly stopped working one day, it does not boot into Zell or the dashboard, the ring does not go red it stays green but the fan makes a noise like it stops then starts again have no clue what? It broke 13 days after I updated to the latest dash so I don't think it's that
Hola, gracias por compartir tu conocimiento, tengo una Xbox 360 Slim placa trinity, la compre de segunda mano, ya tenía lt3.0, lamentablemente en dónde vivo no encuentras dvd de doble capa para quemar discos, así que me animé a instalar RGH, al leer la Nand, me daba errores no lo reconocía y salía un anuncio de que sobre los sectores, creo son de 16 regularmente, la mía decía que era de 10....a mucha insistencia leyó la Nand original pero con errores...tampoco quiso flashar el xenon o el xell, porque estaba corrupta la Nand, así que decidí crear otra Nand y instalarla, corrió todo bien hasta que necesite el dvd Key, el número de serie para parchar la Nand....al final decidí proseguir sin introducir el dvd Key y el número de serie, el RGH funciona bien, pero el lector no lee absolutamente nada....nose si podrías orientarme para poder rehabilitar el lector. Gracias de antemano.
Mine had the same thing it shut off and went red and said contact Xbox support I turns it off and back on but it’s some how fixed , it might have been over heated
Hey any tips on getting console not found after bad nand write, and its NOT MY SOLDERING, I dont know if desoldering so many times has killed the console but now I get no reads!
I have a 16mb corona, tried rgh-ing the console, one of the wires disconnected during the glitch process i think. Console red ringed, fixed it so its not red but green with no display. Now i get no power. Cant use power button, not working for some reason. Dont have a controller.
I installed a matrix v3 chip onto my trinity and once I connect the power the chip turns red but when I turn it on with the eject button nothing shows up on my screen anyway to fix this as I have no idea what to do and nobody seems to have any videos out there to figure this out.
I updated my jtag/rgh xbox 360 not the proper way... I just downloaded the update from Microsoft and put it in USB and then updated the xbox... Now my xbox is not running downloaded games... What can I do now?
Hi, I would just like to ask because I bought an rgh xbox 360 then after a few months it randomly shutdowns. I never mod anything, i just install games. It always goes like that, it will randomly shut down and after many tries of turning it on, it will went okay. However, same story everytime I will use my rgh. Is there anyway I can fix it?
I had this happen luckaly my system still had xell intact and I reinstalled my backup nand and redid the build of the nand and it fixed it this is good to know that this is another methoud to do this maybe my rgh2 that I brick years ago maybe now I can fix it
I really need your help, i have been following all your tutorials before this one and everything works fine and i have xbl online stealth server setup and everything. But when i drag and drop my downloaded RGH games from my pc to hdd1 and then my inside my folder "games" on the xbox, using Xbox 360 SDK. Then i thought it would show up on the aurora dashboard after a restart of the console but it's not. I can use the file manager in Aurora to start the games XEX files and play it from there but i don't have any games on the dashboard! Expect from xell launcher and dash launcher. How should i do to make the games to show up in the dashboard? I really need your help. Thx!!
hey did the e79 happen while the nand was been flashed because mine happened long after I flashed my nand and I was watching your tutorial to make sure I did everything right and I did.🤔😟 I need help PLZ.
Idk why but my rgh don't even boot up it just stays in black screen, though the green ring is on, but black screen- I tried to eject disc tray didn't work, neighborhood don't work either, this happened after the new update that got out recently, yes I did update it through xeflash thing, I don't get it, I didn't have this problem before
Will this work if did a botched update, I updated via a tutorial online a few months back after not using it for months and sometimes it boots to a blank background screen and usually will give me errors. They would pop up like the bubbles when someone logs in. Its been awhile so i dont know exactly the errors but just wondering if this will fix that issue. Xbox elite jasper wih a rgb glitch chip.
Kat Sam They hate “us” because someone of “us” don’t give them enough support or help! When was the last time you donated to the PS4 modding scene? I wouldn’t give and give and give and receive nothing?
Just bought an rgh console off eBay for 145$ arrived today I plugged it in and got this exact gray screen and red ring of death wtf do I do UPDATE bought a hard drive for cheap and it worked
@@neonmodz627 i put in the new hard drive and downloaded xex menu and got all my shit running it was an rgh all i had to do was replace the hard drive lol
I have the same chip same wiring as that one, same problem. Lol it's cool to see this video, cuz it's what I need to do to mine. Except mine is trinity rgh2 but it looks the same as the one you were doing. Thanks for the video, I've seen it now 20 times still am cautious on soldering. In gonna try ethernet cable way first, or anything before I have to solder it. Any pointers,,? Thanks again.
Hey i really need some help i have a rgh xbox 360 trinity and am getting a red dot from some of the games on the hard drive but when i put the same hard drive in another game all the games play fine
i have a different problem. i accidentally uploaded the new update or kernel to my rgh/jtag and used a wrong serial number from another xbox, now i get black screen and green dot. can you fix this i will pay you
I know this is a different subject I have been trying to load a mod menu on gta and nothing is working? The game loads perfectly fine just the menu isnt loading? Please help
I added some free plugins, and then when I restarted the Xbox, it would load the Startup Screen and then shutdown. I removed the hard drive, restarted the Xbox and this time the Xbox worked properly, please help!!!!!!!!!
Now I know your not supposed to refund you money once you purchase a mod menu and do re search on menu before you buy....I DID AND WHEN I BOUGHT IT THERE WERE ONLY FEW VIDS ON YT ABOUT IT BUT THEY WERE IN SPANISH...POINT IS HE WAS FALSE ADVERTISING HIS SERVICES AND KV LIFE IS SO HORRIBLE 3 KVS A DAY OR MORE...SO WHY PAY $400 WHICH WAS THE PRICE WHEN I BOUGHT IT FOR VIP LIFETIME...
my has soild green light no boot screen i think a DVD tray issue or usb because some times (rarely ) it dose boot up if i mess with dvd tray or usb ports (pluging in and out) can any one tell me of its a tray or usb issue
I have a dead rgh2 also and it won’t boot at all I mean it just doesn’t power on. I wish I could just send it to you so you could make a video on trying to rescue my console.
Hey Sorry for the offtopic, but I've been looking for drivers for Jr programmer V2. Unfortunately through all these years I didnt have had enough luck at finding them.
mega.nz/#!2ZAyRYxY!zJ02Pba2bADy-stQ8MCfn1X7UuGs-l2qYhIjecVqwAk I had issues in the video with getting them to work correctly on Windows 10. Even with driver signature enforcement disabled and fake signing the driver. Hopefully you have better luck, but if not it works fine on Windows 7.
@@MODDEDWARFAREThanks for your help, but I have just noticed something interesting. when I connect the Jr Programmer into my pc "W7,OS", pop ups a message that says "Unknown device", when I go to "Device Manager", indeed my Pc recognizes the JR as an Unknown device and not as "Jr Programmer" as you show in the video. Here, I took this screenshot with the issue ibb.co/4MC7JDC I tried to update the drivers you gave me, but still it says that the drivers are updated.
Hi there I need your help.. my Ninja on my rgh is gone and idk what to do I updated the ninja with my WiFi I got today and out of no where my ninja Disappeared
Hello think you can help me with my problem I follow each and every one of your videos i was just wondering if based in your experince can help me with my Hugh problem:( I have moded several consoles with diffrent glitch chips but right now i am trying to modd a Stim trinity16m with a x360run glitch but everytime I tried to read the Nand I keep getting the following error can not continue Wrong Version ) I have already desoldering so manny times and tried with JR programmer and NandX and I keep getting the same error I just don´t know what else to do think you can help me with your experience on what more I can do to read the Nand and conitue with my RGH please help
My rgh is band right. And i recently put one of my xbox accounts on the hdd that i knew had gta v. Obviously i couldnt install gta v to the hdd cause im banned, so i did so on another console, then transferred the hdd back to my rgh. When i go to launch gta it tells me an error in the playstore, "Can't launch Grand Theift Auto V -xbox stores" Ive baught this game, its not torrented. Why cant i play it?. Is it because im banned? The account isnt banned by the way.
Do I have the same problem? Everytime I try to boot my xbox (that has a jtag) it doesn't give me the red ring but it just sits there and doesn't want to boot. I cant do anything with it
Put a empty launch.ini on a USB then boot up Xbox. It's your plugins. If it's just a black screen try turning it off and on and mess with the HDMI cable.
Depends. Is it a Jtag or RGH? If it's an RGH look through the vents and see if you see the green flashing LED when you first turn it on. Then every 3 or so seconds it should blink again as it's trying to boot.
Awesome stuff, I normally write over the last good dump I have on hand to unbrick a console, I haven't done the ECC only method. Got any more details on the NAND reading/writing switch you briefly showed? I know that isn't for a Demon setup but I'm not sure if that's from a Cygnos set or not.
Yeah that chip I showed was from a Cygnos. My Trinity console has one.
@@MODDEDWARFARE what if i dnt have a backup for nand, do have any idea where can i get it? Thanks.
@@gringbel Not much you can do in that case unless you have the original retail nand dumps from the console. Most RGH sellers provide them on a disc or as a download.
Thanks @@MODDEDWARFARE if thats the case, i cannot revive my nephews 360 anymore. Feeling so sorry for him. Anyways, thanks for the reply here. Been watching closely to ur new vids if ever 5.55 is ready to jb. More power to you.
Yo bro there’s another way to fix E79 with out taking part of ur Xbox I’ve gotten E79 plenty of times in the past
I'm always happy when I get a video notification from modded warfare... Legit 💯
me too
Yo huge fan and love what u do! Love jailbroken and RGHs I remember when mw2 1.11 was out and was first time I saw mod menus, reminds me of my childhood, I personally hope to see them on PS4 some day even tho they hit the community hard, keep it up man!! :))
Finally RGH video
Thank you very much for the video! I got an Xbox 360 E with the error E79, it had a mod chip, the previous owner said it failed after an update. Your video helped me to get confidence that I was on the right track with my fix, I bought a JR Programmer and got J-Runner to run on an old Windows7 laptop and I read the NAND successfully and wrote back Xell which printed the CPUkey and the DVDkey on the TV, I used the CPUkey to create an XeBuild and I successfully wrote that into the NAND and now my Xbox 360 E works again! J-Runner's latest version looks a bit different now than when you made this video but it helped me get around still. Thanks again!
Please make a 2019 RGH install
Watched all you're vids.
Great help man. Thanks for everything
I love when you make videos about RGH's!
my rgh keeps blackscreening after the 360 loadup and than turning off what do i do and how do i bypass - edit I figured out how to fix download a good file that has a launch.ini than put it on a usb and put it in the rgh
could you help me plz its my brothers xbox 360 s thats bricked and he does not know yet that his xbox is bricked would you plz help me?
Love when you post videos
First I was sad that the xbox was mess up then I was happy see it was you that has a video on it.
katz console has +clout now
This is the really reazon to exist of the youtube, to fix and help, thanks man, you are cool!!!!
Worked perfectly using the raspberry pi pico
How did you get the backup band from the console ? I thought the backup band had to be stored somewhere else since the band was already flashed
The modder could have stashed a copy on the internal storage of the console itself.
Virtuoso of the craft great vid
I was RGHing for the first time and the mistake I did was that I had the wrong dash version selected when I was trying to flash the hacked image. Im gonna try this. Thanks.
Notification squad.
can I send you my rgh 360 to fix??
What can cause the nand to corrupt ??
I'm helping a guy who has an rgh Trinity 360, error E82 but loads into Xell for him. I'm a bit confused by what it means that Xell can start but not the dash
The yellow point is a pain in the arse. It the ground point so it will need a really got iron to melt that point. It always plays up when I do this.
wanna unbrick my console bro? my brain just went brrrrrr
Love to see x360 stuff.. still have mine though i can't remember the last time i turn it on..☺️
The yellow wire is actually the ground and with a massive motherboard like this it has a massive ground plain so your heat gets sucked away fast with massive ground points
Interesting, Thanks for the info.
I can never get that yellow wire, I solder it to the case every time. It's just a ground
Hi. Just wanna know. Let say we dont have the backup nand/ flashdmp.bin. then we should extract it by clicking on the "Read Nand" button right?
Did you ever get this fixed??
nice 2080ti m8 lol
On my RGH Jasper I have some Coolrunner QSB that allows me to just open and plug in the wires.
My RGH just suddenly stopped working one day, it does not boot into Zell or the dashboard, the ring does not go red it stays green but the fan makes a noise like it stops then starts again have no clue what? It broke 13 days after I updated to the latest dash so I don't think it's that
Hola, gracias por compartir tu conocimiento, tengo una Xbox 360 Slim placa trinity, la compre de segunda mano, ya tenía lt3.0, lamentablemente en dónde vivo no encuentras dvd de doble capa para quemar discos, así que me animé a instalar RGH, al leer la Nand, me daba errores no lo reconocía y salía un anuncio de que sobre los sectores, creo son de 16 regularmente, la mía decía que era de 10....a mucha insistencia leyó la Nand original pero con errores...tampoco quiso flashar el xenon o el xell, porque estaba corrupta la Nand, así que decidí crear otra Nand y instalarla, corrió todo bien hasta que necesite el dvd Key, el número de serie para parchar la Nand....al final decidí proseguir sin introducir el dvd Key y el número de serie, el RGH funciona bien, pero el lector no lee absolutamente nada....nose si podrías orientarme para poder rehabilitar el lector.
Gracias de antemano.
Mine had the same thing it shut off and went red and said contact Xbox support I turns it off and back on but it’s some how fixed , it might have been over heated
Hey any tips on getting console not found after bad nand write, and its NOT MY SOLDERING, I dont know if desoldering so many times has killed the console but now I get no reads!
so when i press the guide button and the console freezes my nan is corupt?
My console flashed incorrclty now i can't connect my Xbox to my pc.any hint?
I have a 16mb corona, tried rgh-ing the console, one of the wires disconnected during the glitch process i think. Console red ringed, fixed it so its not red but green with no display. Now i get no power. Cant use power button, not working for some reason. Dont have a controller.
I accidentally wrote my nand with the retail option and without the cpu key. Would this process help?
I installed a matrix v3 chip onto my trinity and once I connect the power the chip turns red but when I turn it on with the eject button nothing shows up on my screen anyway to fix this as I have no idea what to do and nobody seems to have any videos out there to figure this out.
for all my wires i use leaded solder which make's it easy to solder the wire's to the point's needed
Where can I find a good RGH mod chip and other parts I'd need to complete this? I have 3 OG 360s all flashed and I'd like to try this.
I updated my jtag/rgh xbox 360 not the proper way... I just downloaded the update from Microsoft and put it in USB and then updated the xbox... Now my xbox is not running downloaded games... What can I do now?
will a off track dvd tray cause a no boot up?
Mine came up with that message, but It stopped me playing games from my hard drive first, how do I know if my xbox is broke or just the hardrive
Hi, I would just like to ask because I bought an rgh xbox 360 then after a few months it randomly shutdowns. I never mod anything, i just install games. It always goes like that, it will randomly shut down and after many tries of turning it on, it will went okay. However, same story everytime I will use my rgh. Is there anyway I can fix it?
i dont even get the error my jtag doesnt even load up, i tried xell reloaded but nothing, any ideas?
I had this happen luckaly my system still had xell intact and I reinstalled my backup nand and redid the build of the nand and it fixed it this is good to know that this is another methoud to do this maybe my rgh2 that I brick years ago maybe now I can fix it
Hey man can I send in my rgh and pay you to fix mine I try to load xell up and nothing comes up
Hey nodded warfare I have the same problem but my nand backups have be deleted by mistake. What can I do now?
I really need your help, i have been following all your tutorials before this one and everything works fine and i have xbl online stealth server setup and everything. But when i drag and drop my downloaded RGH games from my pc to hdd1 and then my inside my folder "games" on the xbox, using Xbox 360 SDK. Then i thought it would show up on the aurora dashboard after a restart of the console but it's not. I can use the file manager in Aurora to start the games XEX files and play it from there but i don't have any games on the dashboard! Expect from xell launcher and dash launcher. How should i do to make the games to show up in the dashboard? I really need your help. Thx!!
hey did the e79 happen while the nand was been flashed because mine happened long after I flashed my nand and I was watching your tutorial to make sure I did everything right and I did.🤔😟 I need help PLZ.
Idk why but my rgh don't even boot up it just stays in black screen, though the green ring is on, but black screen- I tried to eject disc tray didn't work, neighborhood don't work either, this happened after the new update that got out recently, yes I did update it through xeflash thing, I don't get it, I didn't have this problem before
Will this work if did a botched update, I updated via a tutorial online a few months back after not using it for months and sometimes it boots to a blank background screen and usually will give me errors. They would pop up like the bubbles when someone logs in. Its been awhile so i dont know exactly the errors but just wondering if this will fix that issue. Xbox elite jasper wih a rgb glitch chip.
how do you reroute the nand if you get bad blocks please help me!!!!
what u say abt ps4 6.20 jailbreak
The developers hate us apparently. They won't even release 5.55
Kat Sam They hate “us” because someone of “us” don’t give them enough support or help! When was the last time you donated to the PS4 modding scene? I wouldn’t give and give and give and receive nothing?
How to Fix Red Dot bricked unit E04/0010.
System is not booting up no fan spin, just red dot.
As easy as prostitutes
Mine boots up like turns on but then the red ring pops up n just shuts down, I can’t even use my rgh no more got any ideas on how to fix it
I have corona motherboard, can i follow this tutorial and soldering?
Just bought an rgh console off eBay for 145$ arrived today I plugged it in and got this exact gray screen and red ring of death wtf do I do
UPDATE bought a hard drive for cheap and it worked
Lol.....CRAZY does Zell-Reloaded work???? Is it even a rgh not just a red ring console???? LOL
@@neonmodz627 i put in the new hard drive and downloaded xex menu and got all my shit running it was an rgh all i had to do was replace the hard drive lol
can i still unbrick after wrong step i my mistake trinity changed to corono now itt wont boot even xell
I have a jasper phat console I did the ace v 3 chip install I done everything right and xell not opening I don't know what to do
I have the same chip same wiring as that one, same problem. Lol it's cool to see this video, cuz it's what I need to do to mine. Except mine is trinity rgh2 but it looks the same as the one you were doing. Thanks for the video, I've seen it now 20 times still am cautious on soldering. In gonna try ethernet cable way first, or anything before I have to solder it. Any pointers,,? Thanks again.
Please help my xbox rgh Corona won't boot to game but only can boot on xloader, what should I do? Thanks for answering
Do a tutorial on how to create a donor nand.
Hey i really need some help i have a rgh xbox 360 trinity and am getting a red dot from some of the games on the hard drive but when i put the same hard drive in another game all the games play fine
I got cell menu bt Cant connect to pc..
i have a different problem. i accidentally uploaded the new update or kernel to my rgh/jtag and used a wrong serial number from another xbox, now i get black screen and green dot. can you fix this i will pay you
any chance to hacking xbox one x ?????
Nobody is interested in hacking in Xbox One. Just pirate those same games on pc.....
Yo my rgh boots into xell and everything works fine I just cannot update it please help???
I know this is a different subject I have been trying to load a mod menu on gta and nothing is working? The game loads perfectly fine just the menu isnt loading? Please help
that's how i bricked my xbox lol by installing a gta menu
I added some free plugins, and then when I restarted the Xbox, it would load the Startup Screen and then shutdown. I removed the hard drive, restarted the Xbox and this time the Xbox worked properly, please help!!!!!!!!!
Tutorial for eboot patcher for skyrim fallout 4 ps4?
Where can I buy the rgh kit from please I have 3 slim xboxes
Now I know your not supposed to refund you money once you purchase a mod menu and do re search on menu before you buy....I DID AND WHEN I BOUGHT IT THERE WERE ONLY FEW VIDS ON YT ABOUT IT BUT THEY WERE IN SPANISH...POINT IS HE WAS FALSE ADVERTISING HIS SERVICES AND KV LIFE IS SO HORRIBLE 3 KVS A DAY OR MORE...SO WHY PAY $400 WHICH WAS THE PRICE WHEN I BOUGHT IT FOR VIP LIFETIME...
my has soild green light no boot screen i think a DVD tray issue or usb because some times (rarely ) it dose boot up if i mess with dvd tray or usb ports (pluging in and out) can any one tell me of its a tray or usb issue
where abowt the green lihgt
Please Make more videos on xbox 360
Plz I need help it's working but when I hit wright xell it say's Flash Config: 0x00000000
Can not Continue do you know how to fix it
I have a dead rgh2 also and it won’t boot at all I mean it just doesn’t power on. I wish I could just send it to you so you could make a video on trying to rescue my console.
Hey Sorry for the offtopic, but I've been looking for drivers for Jr programmer V2.
Unfortunately through all these years I didnt have had enough luck at finding them.
mega.nz/#!2ZAyRYxY!zJ02Pba2bADy-stQ8MCfn1X7UuGs-l2qYhIjecVqwAk I had issues in the video with getting them to work correctly on Windows 10. Even with driver signature enforcement disabled and fake signing the driver. Hopefully you have better luck, but if not it works fine on Windows 7.
@@MODDEDWARFAREThanks for your help, but I have just noticed something interesting.
when I connect the Jr Programmer into my pc "W7,OS", pop ups a message that says "Unknown device", when I go to "Device Manager", indeed my Pc recognizes the JR as an Unknown device and not as "Jr Programmer" as you show in the video.
Here, I took this screenshot with the issue ibb.co/4MC7JDC
I tried to update the drivers you gave me, but still it says that the drivers are updated.
Can i use different nand to different console
Hi there I need your help.. my Ninja on my rgh is gone and idk what to do I updated the ninja with my WiFi I got today and out of no where my ninja Disappeared
Hello can i know how to fix auto rebooting my xbox 360 slim :( plz help me ..
can you help me ? my xbox is not booting after updating
nice job
Where did you get your J R programmer from
It was a long time ago. ck3.co.uk I think, but they don't exist anymore. You can probably get Chinese clone versions off ebay.
I HAVE ONE XBOX 360 SLIM GLITCHED dead affter online update how repair it
Hello think you can help me with my problem I follow each and every one of your videos i was just wondering if based in your experince can help me with my Hugh problem:( I have moded several consoles with diffrent glitch chips but right now i am trying to modd a Stim trinity16m with a x360run glitch but everytime I tried to read the Nand I keep getting the following error can not continue Wrong Version ) I have already desoldering so manny times and tried with JR programmer and NandX and I keep getting the same error I just don´t know what else to do think you can help me with your experience on what more I can do to read the Nand and conitue with my RGH please help
Dose this work on the pants consles
Chance Xbox one next later ???
My rgh is band right. And i recently put one of my xbox accounts on the hdd that i knew had gta v. Obviously i couldnt install gta v to the hdd cause im banned, so i did so on another console, then transferred the hdd back to my rgh. When i go to launch gta it tells me an error in the playstore, "Can't launch Grand Theift Auto V -xbox stores" Ive baught this game, its not torrented. Why cant i play it?. Is it because im banned? The account isnt banned by the way.
Kerberos just install the GtaV online or extract a GtaV disc
Unistall RGH reset to defaults
Genius👍👍👍👍Awsome
Can we mod xbox 360 with software mod?
i cant even boot xell after update (wrong step)
Do I have the same problem? Everytime I try to boot my xbox (that has a jtag) it doesn't give me the red ring but it just sits there and doesn't want to boot. I cant do anything with it
KGamingHD probably bad connection. look into the top of your vents and see if your chip is blinking
Put a empty launch.ini on a USB then boot up Xbox.
It's your plugins.
If it's just a black screen try turning it off and on and mess with the HDMI cable.
Depends. Is it a Jtag or RGH? If it's an RGH look through the vents and see if you see the green flashing LED when you first turn it on. Then every 3 or so seconds it should blink again as it's trying to boot.
@@InnocenceMods I dont see my chip blinking
@@MODDEDWARFARE I just realized it's an rgh. I dont see the led light blinking when I boot it up
Can you do a video on how t ok update gta v to 1.27 bc everytime I do it I get and error and that's with a disc version
How can i change my Dashboard color to Blue on RGH?
The blue theme is part of the XbOnline stealth server plugin. If put that plugin on you get the theme.
Read Nand
Create ECC
Write ECC
Write Nand
No need to build Image?
am i right?
No you're not 'collect'. You're Christopher Robert, like it says in your name ;)
You must build image or else it will only write stock dash
umm sir i need some help with my jtag plz reply so i can tell the problem