2021 and a life saver. You have no idea how frustrating it is when you are reading a manual and it says (you can easily identify the nand size by turning the console on and..) when you just took 45 min to take it apart. LOL
This video was SURPRISINGLY HELPFULL !!! I was so worried about the version of my nand and now i feel that i already know everything i actually need to. Thanks a lot man !!!
@TheWeekendModder I have 16 MB model, It's already RGHed. I want to update the kernel from 17511 to 17559. But the problem is when I dump NAND I get 16MB file rather than 48MB, and it doesn't flash. How do I proceed further? Any help would be great, Thanks.
Okay. Thanks for the information. I have a Xbox 360 Slim Corona with A 16 MB NAND. Which NAND Reader whould you buy? The JR Programmer for 40 € or The Matrix USB NAND Flasher?
just looked at my childhood slim, it's got a 16mb nand and has the traces, the dvd drive has the winbond chip though, last time i used it though the disk drive stopped reading disks and i believe it was scratching disks long before that
😢 Hello, I have an xbox Halo4 360 with a Corona 16MB without post out When I apply a postfix I always only get 12.3 kohm with a multimeter and the console doesn't boot with RGH3. Thanks
Hey i know this videos old but im wondering if i just remove my internal nand if that is the 4gb memory? Or if its not then where is the 4gb memory in the corona and if i remobe the 4gb memory will it mess up the xbox If you are curious why i am asking this is because i think my internal memory is currupt as i cant update my xbox at all and wanna know if i can just remove tje internal memory and just use a usb instead :P
I installed my glitch board and it did not attempt any glitches at all at boot. I will check if my board is the same as yours so I can pick up the post fix adapter.
I have a halo 4 edition console. I certain its a 16mb from what i read. And it may need a postfix. But my question is if i send it to you would you also be able to make it a dual nand for me? I would like to have both rgh and retail thanks!
There are different postfix adapter versions. I have a v4 adapter but I think I have a non v4 notherboard, due to the resistors near the black xbox360 chip. Is the postfix adapter still okay??
Is there a way to tell before opening the console? Is it right that the 4gb NAND is the 4gb version (non-hard drive version) of the xbox360 that was sold?
quick question back a few years ago my son sent off his xbox 360 s to get modded….since then he gets the blue screen and I'm wondering can this thing be restored to the original form? I find a lot of videos on how to mod one but not to many on how to get it back to the original form....I would appreciate your feed back...thx
You need his original nanddump to revert it. And to remove the glitch chip's power at minimum. Honestly, given that you can pick up a non-modded 360 at any pawn shop for less than $40 these days it's probably easiest to just do that.
i found out by the date of my console that hasn't arrived it is a corona v3 or v4 what else am i going to have to buy i have the CR rev c and the JR programer i really like doing the mod myself i understand you run a business just asking if you can help out with the info thank you for all your other replys
If you're looking to grasp everything that'll go into a mod and aren't going to follow one of my specific guides, then I suggest you give this a read, a few times over probably: www.se7ensins.com/forums/threads/jtag-rgh-r-jtag-xbox-360-ultimate-exploit-guide.804054/
+James Borne If you have the CPU key and an original nand dump just load it as source in xebuild gui loaded with the dashboard you are targeting and build a new image. You can't downgrade on a retail though.
@@legosarefun5085 Microsoft will fix it for free if you can prove proof of purchase. If you don't have the receipt try contacting Microsoft anyway as they were brilliant with mine. Better l8 than never.
You can find out by looking next to the horizontal jtag headers If there is two resistors missing on (R2C7 & R2C6). Will need a postfix adaptor. If they are there you won't need postfix adaptor
TheWeekendModder i have a Xbox 360 Slim v4 jul 2012 to present. witch I believe doesn't need a outpost. i have everything I need to get it glitching. I just don't find a good tutorial to the wiring for the v4 4g can you help again? 😬 I'm done with the test Xbox and would like to prep the new one I have thank you.
In 2020 this information still being useful, thanks a lot!
Fucking Google putting their shitty CoVID -19 disclaimer box on this video ROFL
2022* :D
2021 and a life saver. You have no idea how frustrating it is when you are reading a manual and it says (you can easily identify the nand size by turning the console on and..) when you just took 45 min to take it apart. LOL
This video was SURPRISINGLY HELPFULL !!!
I was so worried about the version of my nand and now i feel that i already know everything i actually need to.
Thanks a lot man !!!
Happy to surprise!
I think it's cool that your doing these tip vids, they are definitely needed. There are so many noobs that fuck up there xboxs
Thanks for simplifying this info. All the guides out there make it rather confusing.
You made it soooo clear!!!! Thank you very much!)
@TheWeekendModder I have 16 MB model, It's already RGHed. I want to update the kernel from 17511 to 17559. But the problem is when I dump NAND I get 16MB file rather than 48MB, and it doesn't flash. How do I proceed further? Any help would be great, Thanks.
Okay. Thanks for the information. I have a Xbox 360 Slim Corona with A 16 MB NAND. Which NAND Reader whould you buy? The JR Programmer for 40 € or The Matrix USB NAND Flasher?
I love how it shows the coronavirus info on the video XD
just looked at my childhood slim, it's got a 16mb nand and has the traces, the dvd drive has the winbond chip though, last time i used it though the disk drive stopped reading disks and i believe it was scratching disks long before that
😢 Hello, I have an xbox Halo4 360 with a Corona 16MB without post out
When I apply a postfix I always only get 12.3 kohm with a multimeter and the console doesn't boot with RGH3. Thanks
i'm installing a postfix today, its a corona v1 - does the "5" pad need to be wired to my "C" pad on my ace v3, correct?
A-yup.
Hey i know this videos old but im wondering if i just remove my internal nand if that is the 4gb memory? Or if its not then where is the 4gb memory in the corona and if i remobe the 4gb memory will it mess up the xbox
If you are curious why i am asking this is because i think my internal memory is currupt as i cant update my xbox at all and wanna know if i can just remove tje internal memory and just use a usb instead :P
I installed my glitch board and it did not attempt any glitches at all at boot. I will check if my board is the same as yours so I can pick up the post fix adapter.
Yea, a Corona that needs a postfix won't attempt to glitch if you don't have the postfix cause it's not getting that signal.
thank you thank you thank you so much!
Doesn't the version affect the type of postfix adaptor that you need?
Nope. Postfix V1 and V2 do the exact same thing - the V2 just simulates different wire lengths.
It shows me the coronavirus information header.
I have a halo 4 edition console. I certain its a 16mb from what i read. And it may need a postfix. But my question is if i send it to you would you also be able to make it a dual nand for me? I would like to have both rgh and retail thanks!
I'm not offering send in services anymore, but check out weekendmodder.com/store and consider picking up the supplies to DIY!
There are different postfix adapter versions. I have a v4 adapter but I think I have a non v4 notherboard, due to the resistors near the black xbox360 chip. Is the postfix adapter still okay??
Yes. Postfix versions just refer to the postfix themselves and don't mean anything with regard to what version motherboard you can put it on
@@TheWeekendModder Thanks!!
For new bypass rgh3 nice info
Is there a way to tell before opening the console? Is it right that the 4gb NAND is the 4gb version (non-hard drive version) of the xbox360 that was sold?
yes. hdd model has 16mb nand
quick question back a few years ago my son sent off his xbox 360 s to get modded….since then he gets the blue screen and I'm wondering can this thing be restored to the original form? I find a lot of videos on how to mod one but not to many on how to get it back to the original form....I would appreciate your feed back...thx
You need his original nanddump to revert it. And to remove the glitch chip's power at minimum.
Honestly, given that you can pick up a non-modded 360 at any pawn shop for less than $40 these days it's probably easiest to just do that.
TheWeekendModder yeah that’s what we’re thinking or he might hold out until the new one this year. Thank you 🤘🏽
Of course I told him get a used one 😬
hi i won't to ask you
in my Xbox 360 i have ship Xbox360 run rgy what dual nand is work with her
great info thanks
i found out by the date of my console that hasn't arrived it is a corona v3 or v4 what else am i going to have to buy i have the CR rev c and the JR programer i really like doing the mod myself i understand you run a business just asking if you can help out with the info thank you for all your other replys
If you're looking to grasp everything that'll go into a mod and aren't going to follow one of my specific guides, then I suggest you give this a read, a few times over probably: www.se7ensins.com/forums/threads/jtag-rgh-r-jtag-xbox-360-ultimate-exploit-guide.804054/
thank you
hey, how do you downgrade your dash? because I was thinking of installing rgloader
+James Borne If you have the CPU key and an original nand dump just load it as source in xebuild gui loaded with the dashboard you are targeting and build a new image. You can't downgrade on a retail though.
+TheWeekendModder how do you fix the red ring of death on slim rgh Xbox that I bought from you
@@legosarefun5085
Microsoft will fix it for free if you can prove proof of purchase.
If you don't have the receipt try contacting Microsoft anyway as they were brilliant with mine.
Better l8 than never.
How do i know if i need a postfix adapter without removing the heat sink ? :)
You can't know for 100% without removing the heat sink.
You can find out by looking next to the horizontal jtag headers
If there is two resistors missing on
(R2C7 & R2C6).
Will need a postfix adaptor.
If they are there
you won't need postfix adaptor
TheWeekendModder i have a Xbox 360 Slim v4 jul 2012 to present. witch I believe doesn't need a outpost. i have everything I need to get it glitching. I just don't find a good tutorial to the wiring for the v4 4g can you help again? 😬 I'm done with the test Xbox and would like to prep the new one I have thank you.
ruclips.net/video/YRHmUsrrMkA/видео.html
ok quick dum question the nand is different on my xbox is that a problem?
hey so I can send an Xbox 360 slim if so you'll charge 75 dollars?
+Wheesing Skate3 Yes, that's exactly how it works. Check out the info on the store at store.weekendmodder.com
Man I wish somebody can do this for me being that I'm partially blind, I can't solder.
On my store page I have a few trusted providers that offer send in services.
@@TheWeekendModder Please direct me to them... I'm in the Tar Heel state.
@@OwlCapone8630 I did, on my store page. weekendModder.com/store. Go to the send in link
@@TheWeekendModder Ok, thanks.
how do I rgh Xbox 360 e v5
You cant if the date is older than 2014