This was way more involved than I thought it would be for a new wheel. Killer video as always - never assuming the audience knows the little tips and tricks. Always calling out which tools needed for each step. So good
Mate, I bought the wheel and installed it myself for 4 hours - all thanks to your videos. I watched them and followed your instructions step by step, bought all the tools needed and play/paused all the time :) Thank you so much!
Im from the uk and i followed this video and installed my race wheel to my 2018 m3 competition .. and it works .. best video on youtube as far as im concerned 🙌🏼 thank you
Thank you very much Brian, following your videos I was able to assemble and wire my M Performance Race II steering wheel without any problem, thank you again and continue the very quality of your videos .......
The original steering wheel is much better looking imo. I can only imagine what alcantara will look like in a few months. As usual, very informative video.
Great work guys! So many awesome options out there and I would happy change my steering wheel.. I just need to secure one of the round style airbags as I have the pre-LCI style wheel now. 8)
Thanks for the video. Helpful for my install. FYI that wiretap with the lime green wire. Make sure its hella tight and double check it and tighten again. Wheel Led's wouldn't light up and turns out it was that tap loose.
Hello I have problem with blind spot fault.. its becouse in new steering wheel dont have space where to put that vibration motor.. so my question is? is it possible to somehow code the steering wheel vibration off so i won't get error and active blind spot detection will continue working without vibrating but showing warning light on mirrors?
Great Video, only one thing i say is . What about us here in the UK, the FEM module is in the left hand and all the Con3 & Con4 , are in different positions, and it makes wiring one of these steering wheels very difficult indeed. I have looked RUclips and the internet, and no one from the UK , has did a step by step video like yours to show folk how to gain easy access with the wiring, I bought the steering wheel, this just looks much to big a job for me to take on, and most BMW dealerships will not take it on .
If I have the race wheel installed already, and want to switch to normal wheel from time to time. I don’t need to do all of these every time I change right? I can just leave those wires and modules in there and just change the steering wheel
Alot of items on your side are for the f30 f32 f34. But rarely they are for the f36 aswell. If it isn't described in the title of the product. Does it still fit the f36?
Great way to tell part compatibility is look it up on REALoem. If you look at a specific part listing, it will show all compatible models.. in a lot, but not all, cases most F3X parts will fit on F3X. Obvious exceptions for 2 door, 4 door, hatch, components of course but many are the same.
Damn fellas .. are you seriously trying to make me spend all my money on my car 😂 take my money already for this wheel!! Also, as always sickkkkkk editing Zach I love it 🔥
So I just got my led steering wheel installed and I'm getting driver restraint system on my dash, was wondering if it has to do with the ground wire?? Please help???
Hi Brian I love all your video on the m3 I’m ordering this race steering wheel aswel for my 2015 bmw m4 My problem is I live in Australia and our steering wheel is on the right side Do I do the same things that you do but do it on the opposite side? Do you have any info for me Thanks
Will this M2 steering wheel work on a 2016 340i M Performance? (F30 LCI) I know that they make one for the 340i but the stitching is white. And I need the M color stitching to match my interior. Plus the M2 version looks better! 😉
You do an awesome work! Learned a lot from your videos already, although I have a X3 F25. BTW do you have the PN for this additional pin you have to connect? I want to retrofit paddles on my X3 and I’m struggling in finding it.
Followed your install video, but when I turned on the ignition for my car, the windshield wipers started going, are there any wiring changes on a 2017 M3 F80?
Love this video and have considered this wheel before. However I can't see spending that kinda of money on something that won't give me a HP gain. Fancy steering wheel? Or titanium exhaust? I know what I did. :-)
Hey man, great video! I recently bought a F10 550i with a led wheel already installed. I don't know how they installed it but my leds light up when i start the car (little dance back and forth) and my display also works. I can cycle through my menus but when I pull up my oil temp the values are just -48 Degrees Celsius. My shift lights also dont light up. Do you know why that could be? Did they connect something the wrong way or do i need to code anything? I would really appreciate an answer, been looking for some help for a while now. Thanks :)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
This was way more involved than I thought it would be for a new wheel. Killer video as always - never assuming the audience knows the little tips and tricks. Always calling out which tools needed for each step. So good
Mate, I bought the wheel and installed it myself for 4 hours - all thanks to your videos. I watched them and followed your instructions step by step, bought all the tools needed and play/paused all the time :) Thank you so much!
Are they heated
Im from the uk and i followed this video and installed my race wheel to my 2018 m3 competition .. and it works .. best video on youtube as far as im concerned 🙌🏼 thank you
is everything opersite sides?
I don't even own one of these cars YET.... But I have to say this is one of the best DIY videos I've ever seen. You are a great installer.
The best how to video on this product. Now I'm tempted to buy one of these.
I’ve been waiting for this! Thanks Brian! Amazing job!
You're a professional installer, we will be at Knowledge Fest Thank you for the content
I have no intentions (right now) of spending $1900 on a wheel... Did I still watch the entire video? Absolutely
Been lusting over this wheel for a long time, wish it didn't delete steering wheel heat since I live in Canada.
It’s two grand
It seems that the only way to heat this racing wheel is to use your hands :)
Just amazing looking bro.. love it.. can not wait for part 2.🤩
I don't know why i watch this..😁😁. I don't even own a car yet... Nice video bro, u explain each and everything properly.
Thank you very much Brian, following your videos I was able to assemble and wire my M Performance Race II steering wheel without any problem, thank you again and continue the very quality of your videos .......
thanks bryan. a video i always wanted to see fro you.
The original steering wheel is much better looking imo. I can only imagine what alcantara will look like in a few months. As usual, very informative video.
Great work guys! So many awesome options out there and I would happy change my steering wheel.. I just need to secure one of the round style airbags as I have the pre-LCI style wheel now. 8)
Thanks for the video. Helpful for my install. FYI that wiretap with the lime green wire. Make sure its hella tight and double check it and tighten again. Wheel Led's wouldn't light up and turns out it was that tap loose.
Where can you get those wire taps at?
Crystal clear, amazingly helpful video., thanks for sharing
Always the best like usual , please can you tell us when part 2 will be ready ? Thank you my friend
Thanks! Tomorrow :)
Damn it. I wish I had this video 2 years ago.
Hey, can you kindly explain why you didn't plug in the other cable, which I assume is the lap timer?
Hello
I have problem with blind spot fault.. its becouse in new steering wheel dont have space where to put that vibration motor.. so my question is? is it possible to somehow code the steering wheel vibration off so i won't get error and active blind spot detection will continue working without vibrating but showing warning light on mirrors?
Great Video, only one thing i say is . What about us here in the UK, the FEM module is in the left hand and all the Con3 & Con4 , are in different positions, and it makes wiring one of these steering wheels very difficult indeed. I have looked RUclips and the internet, and no one from the UK , has did a step by step video like yours to show folk how to gain easy access with the wiring, I bought the steering wheel, this just looks much to big a job for me to take on, and most BMW dealerships will not take it on .
Hi! I have My steering wheel for a couple of years and out of the blue it does not turn on… wanted to know if is because of the Control Module ?
Any options without Alcantara? Not a fan of that material.
If I have the race wheel installed already, and want to switch to normal wheel from time to time. I don’t need to do all of these every time I change right? I can just leave those wires and modules in there and just change the steering wheel
Alot of items on your side are for the f30 f32 f34. But rarely they are for the f36 aswell. If it isn't described in the title of the product. Does it still fit the f36?
Great way to tell part compatibility is look it up on REALoem. If you look at a specific part listing, it will show all compatible models.. in a lot, but not all, cases most F3X parts will fit on F3X. Obvious exceptions for 2 door, 4 door, hatch, components of course but many are the same.
Would you please tell me can I install it on X3 2015?
what is that unused cable for and where does it plug in
would this work on a 435?
Nice install!. How much for the old wheel?!
I got 20$ more then him
50 more ;D
Can isso install this steering with control unit v2. 1.2?
Mine won’t work with this mounting options any ideas why ?
Damn fellas .. are you seriously trying to make me spend all my money on my car 😂 take my money already for this wheel!!
Also, as always sickkkkkk editing Zach I love it 🔥
So I just got my led steering wheel installed and I'm getting driver restraint system on my dash, was wondering if it has to do with the ground wire?? Please help???
Was this suddenly on after the installation, or did it come on a while after the installation? Sometimes, you need the SRS system reset.
My turn signals don’t work can I update the firmware for compatibility
Do you need codify the steering wheel or is ready to go???
Beautiful ;)
Hey can do the things you do to install it in my 2020 M4cs ?
This wheel works on diesel models?? Thanks
can you buy the long cable and the control unit separately?
Why was the lap timer not connected???
Hi Brian I love all your video on the m3
I’m ordering this race steering wheel aswel for my 2015 bmw m4
My problem is I live in Australia and our steering wheel is on the right side
Do I do the same things that you do but do it on the opposite side?
Do you have any info for me
Thanks
Have you put a short shift kit on your F80 M3?
14:50, what happens if I spin it? I already did
I think you'll need a new clock spring.
Will this M2 steering wheel work on a 2016 340i M Performance? (F30 LCI) I know that they make one for the 340i but the stitching is white. And I need the M color stitching to match my interior. Plus the M2 version looks better! 😉
You do an awesome work! Learned a lot from your videos already, although I have a X3 F25. BTW do you have the PN for this additional pin you have to connect? I want to retrofit paddles on my X3 and I’m struggling in finding it.
Followed your install video, but when I turned on the ignition for my car, the windshield wipers started going, are there any wiring changes on a 2017 M3 F80?
Could you fix it i have the same problem
Does this work on my F10?
no chance of getting a F20 M140i sorted with this?
great video. Question is this wheel compatible with a x5 f15?
If i have a manual and i order the wheel with paddle shifters can i still install?
Hi, does this work with the F87 M2 Comp? Are the harness the same? Thanks
What happens if the combination switch spins around?
You got to be very careful, or it's screwed and from understanding take a lock of effort to fix.
F33 ?
Does anyone know if it works on the F01?
Love this video and have considered this wheel before. However I can't see spending that kinda of money on something that won't give me a HP gain. Fancy steering wheel? Or titanium exhaust? I know what I did. :-)
I'm gonna spend that kinda money on the 6wb Guage cluster but I can't see buying the wheel
Hey man, great video! I recently bought a F10 550i with a led wheel already installed. I don't know how they installed it but my leds light up when i start the car (little dance back and forth) and my display also works. I can cycle through my menus but when I pull up my oil temp the values are just -48 Degrees Celsius. My shift lights also dont light up. Do you know why that could be? Did they connect something the wrong way or do i need to code anything? I would really appreciate an answer, been looking for some help for a while now.
Thanks :)
I have the same issue, did you solve the problem?
I like this wheel but I wish it was leather on the grips and a flat bottom.
Suade would look gorgeous instead of that steering wheel material
nice
Damn Brian you make me spend too much money!
I wish they made a wheel for. Nissan
BRYAN, PLEASE MAKE THE F30 SPACERS VIDEO!!!!! PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE PLEASE 🙏
It's coming ;)
@@KiesMotorsports WooHoo!!! If you haven't noticed yet, I'm really looking forward to that video!! 🤣 Thanks guys!!
Safe place: cup holder
Kind of obnoxious how the dealership is offering to install it for $600.
can this steering wheels match f18?