All BMW Owners Should Replace These Two Parts Before It's Too Late *EASY DIY*
HTML-код
- Опубликовано: 8 июн 2024
- There are BMW parts that are pretty known for being faulty and then there are some that 1. are commonly overlooked and 2. break all the time. Well my e93 BMW 335i is experiencing issues with those parts and I figured I share with you guys reasons why they fail and how to replace them. Even if you don't have experience working on cars, I can assure you this DIY is very easy and should take you no more than 2 hours to perform.
ALL 335i EPISODES ► bit.ly/BMWVV
SUBSCRIBE FOR WEEKLY VIDEOS ► bit.ly/VViralsSub
Get your digital cluster and performance mods here:
vehiclevirals.com/
Products used in the video: (Affiliate links)
Jack Pads:
E9X Sedan ► bit.ly/3bHf8fb
E9X Coupe ► bit.ly/2VGoz9i
E9X Convertible ► bit.ly/35f2DoT
Jack pad with adapter set:
E9X Sedan ► bit.ly/2ScSfIX
E9X Coupe ► bit.ly/3573k3H
Jack adapter ► bit.ly/2VIfP2C
Jack flat top ► bit.ly/3aMPy7C
Leak Detection Pump ► bit.ly/2Y98eLT
6 Reasons Why You Should Buy An "UNRELIABLE" BMW 335i - 5 Years of Ownership
• 6 Reasons Why You Shou...
5 Things You Should NEVER Do After Buying A BMW 335i EXPENSIVE MISTAKES
• 5 Things You Should NE...
Reach out to Guardian Wraps for all you vinyl needs!
Email: guardianwraps@gmail.com
website: www.guardianwraps.com
Performance Mods Installed:
VRSF 7.5" Stepped Race FMIC ► bit.ly/2YtRxK4
VRSF 7" and 5" Performance FMIC ► bit.ly/3r4bCTv
VRSF Down Pipes ► bit.ly/2MX0VUf
VRSF Charge Pipe ► bit.ly/3o86dsV
VRSF Dual Cone Intakes ► bit.ly/3aSpWYR
VRSF Inlets ► bit.ly/2LE0gGO
HKS Blow Off Valve ► bit.ly/38oyuGt
Valvetronic BMW 335i Exhaust System ► bit.ly/2nZHQ73
USE THIS LINK TO SAVE $75 ON BAYOPTIKS CUSTOM HEADLIGHTS ► bit.ly/2kDQveg
(OR USE PROMO CODE AT CHECKOUT: VEHICLEVIRALS)
Tuning ►MHD bit.ly/VVMHD
MHD Flasher App ► bit.ly/VVMHDAPP
Cheap MHD Compatible Tablet ► amzn.to/2ZGTEJU
PRO-K + DCAN Cable ► bit.ly/BGEEKS
Wheels: 19x9.5 VMR 803 ET +25 Square
Tires: Falken Azenis FK510 F:235/35 R:265/30
Business Inquiries: cristian@vehiclevirals.com
Follow me on social media!
Facebook: / vehiclevirals
Twitter: / vehiclevirals
Instagram: / vehiclevirals 
Авто/Мото
![Latto - Sunday Service (feat. Megan Thee Stallion & Flo Milli) [Remix] (Official Video)](http://i.ytimg.com/vi/9gL0F1xIt2I/mqdefault.jpg)
Just released a Vehicle Virals shirt featuring the BMW from this video. I have less than 100 available! vehiclevirals.com/products/bmw-3-series-in-motion
I have a trans failsafe light comes on 1995 740i what can cause that when it's warm it's hard to shift automatic
What will u recommend for P0442 code ?
I'm definitely getting the jack pads as soon as I can get it out of limp mode😬
I wanted to buy 330 ci convertible 2006 90 k miles it will be cost me high replacement later and are you recommending i buy it thanks?
Harbor freight sells a compact hydraulic car jack. It's pretty small. It slides under your can and it is super low profile. Turn on the hydraulic pump and it easily lifts the car at least 4 ft. Cost between 5 or 600 and it's awesome
I bought a 2011 335IS two months ago and your video's have been great tools. I'm already FBO and looking to improve my fuel system next but these simple installs are exactly what I need to get my car up to spec. Thanks!
Always helpful, entertaining, but most of all encouraging and inspiring to do more DIY stuff on my BMW, thanks again and stay safe and well, to you and your family. Take care always.
NEVER use grease on rubber grommets or flange adaptors - use SILICONE SPRAY LUBE instead - it protects and revitalizes the rubber, keeping it supple and pliable, preventing it from drying out, cracking, or tearing. Just a little FYI for ya, brother. :) Good videos - you've earned a new subscriber! Cheers!
Has a plumber silicone grease is my best friend when repairing boilers etc around the orings etc 👍👍👍
what brand do you go with Brian?
Brother this was an awesome video 📹. I had just gone to auto zone yesterday and the scanned the code and they had no idea what it was. So this helps me out a ton. Thank you! I also took your advice on the jack pads. Now on ecs though the pump is $89. Just for future. I can't believe I just stumbled onto this video. Keep coming with the videos.
Bro you deserve way more acknowledgment and subscribers much love
Had to replace the DTML pump on my '04 M3 just this past year. Jack pads fall out regularly, every BMW I know is missing some. As for the Jack pad adaptor... aluminum???... just cut up a hockey puck. Works PERFECTLY!!
Christian love these video you are so informative. BMW the ultimate driving machine as long as maintenance is carried out correctly stay safe Bro 🇬🇧
Ultimate driving machine but pass onto someone else when warranty runs out. Or till 5 years old at most.
Always remember at any time you are jacking up your vehicle with a jack or jack stand to chock block your wheels so the vehicle doesn't roll off the lift device you are using. Thanks for sharing this video Christian! It makes sense to maintain your vehicle's parts that are known to fail and the parts used to reduce damage lifting your vehicle in order to do maintenance. LOL at neighbor about a tire rotation. 😅 You are informative as always and we'll be wishing you the best brother! PEACE!
I did chuck the wheels btw 😏
Great video, very informative and good to watch. thank you for sharing with us.
I have absolutely no experience with vehicles and i will not do what you're doing, but i am enjoying the video and all the tips you're giving. Nice!
The jack pad I have is exact same size & shape, but made of hard rubber, so has some flex in it. I think it works well.
The simple tings in life matters ESPECIALLY on a BMW
Informative video man😎
im getting a E92 335i pretty soon and I stumbled upon this account and honestly im going to do maintenance by myself anf this channel really helps.. thanks man
No no no get an M3
Jack Pads almost universally overlooked. Safety glasses too.
Yo…. Thank you SO much for this. I love my BMW 435i. But I despise the fact that it is so tough sometimes to figure out the most basic and routine maintenance to extend their performance and lifespan. Thanks again.
Pretty cool, Dude!!! Thanks for all that awesome info which I had no idea. Keep them coming. I like to keep my car in pretty good shape! -Take care!!!
Good stuff! Check engine light just came up on my car last week!
10.40: this item is also called the fuel vapour detection pump. This must be what's causing my engine light, plus the fuel smell. Thanks for the excellent tip. Keep up the great work. 👍🏿
No you most likely have a leak. The DMTL is simply a vacuum pump that puts the system under vacuum so that the engine computer can monitor for decay and flag leaks. If you smell fuel, remove rear seat lower cushion. There will be a black fibrous noise insulator. Lift that, and you will find the access doors to the fuel filter module, and the fuel pump. Focus on the driver side one. The access door is secured by four 8mm screws. Undo those, lift that cover, and you will most likely find that the fuel filter module, is leaking fuel. It will be puddled with gasoline.
To replace one, you must remove both sides, as the module has lines that connect to the fuel pump on the right side.
VDO is the OEM supplier and they sell a kit which brings everything you need to replace it.
no, its definitely 100% a cracked fuel pump..thats made out of plastic...ask me how I know lol..
@@dfweurocars yep me too
@@EatSleepLiveTheGame happens to the best of us lol
I actually have that DMTL issue and got the part a few months ago, but haven’t put it in :) Perfect timing.
Nice job guy. Thanks for the links!
Great clip. Thanks for sharing this valuable info!
Can’t wait to do this on my M4, great video bro! Thank you!
You can make jack pad adapters out of hockey pucks for about $1 each. Being rubber, they also provide some cushioning.
Great DIY video bro!!!. You have shown me another way on how to save money on my own e90. Thanks.
Thanks to your vids I passed on the 328i I was going to buy and bought a sweet loaded black on black '08 335i E93 like yours. I'll be watching more of your vids for wisdom. First up: fuel pump.
I have the same problem. Need to change mine too. Good content bro.
These videos help with my e90 328i maintenance . Please post more videos ❤❤
Wish all cars had jack pads like that. Though I will say here in Vermont, salt and dirt would get inside the rockers, rot out those mounting spots, and eventually you wouldn't even be able to use those areas, hah. Good spot to pop out the pads and spray rust prevention inside the rockers though!
Great work! Thanks for the help!!!
I just bought a 2013 328i , I’m excited 😊
My DMTL pump failed several days after buying my E90 328i, unfortunately. At least it was a easy fix. And just 2 days ago, I messed up 1 of the jacking points. So this was uploaded at just the right time.
Thank you I need to do this on mine too
Excellent job with the video!
That pump , the turbo solenoids, and the lines were the first thing I purchased and replaced. Easy swap except the line going to the back turbo.
Excellent helpful video 👍🏻 thank you and God bless . All the best from Tigersbay North Belfast 🇬🇧🇮🇪
This is a must!
I have started to watch your videos because you are teaching us novices how to do preventative maintenance before the "s***" hits the fan. Keep up the good work.I have a question for you. You are using a debugger (obd2) to scan for faults. What are you using and your thoughts please?
Looks like you haven’t made any new videos in a while. Your videos are so much helpful!
I have just bought some new jack points for my E87 I didn’t realise it was brute force to remove them, I have them sat in a box because I couldn’t figure an easy removal technique
Awesome video bro keep up the videos !
This is good to know mine are not missed up but good to know you can change them if needed.
A bmw in my garage for 4 years and I have an adapter but I had no idea those pads were under the car. . . .Great video
Thanks for posting
Cool Video! Thanks for posting the code, DTML
Nice tip.Thanks
"plastic".. yo, I'm cracking up because I need to change those extra same parts. 🤦🏽♂️ Started throwing codes for the evap pump after changing the fuel pump and sending unit. Though my check engine light went off after I cleaned the gas cap. It's probably plotting the right moment to illuminate... Great vids as always. You're a real inspiration bro.. keep it up!
Had the evap pump fail on my Mini too. Same issue. Wasn’t hard or expensive to fix once I had the codes.
Nice video bro keep up the good work
Thank you bro for sharing this video its very helpful
I’m changing my leak detection pump today. Lifetime warranty with FCP euro. Thanks for the video.
nice job, good video, thanks!
That sponge bob reference was executed perfectly bro 🤣
Great stuff you show us
I got a 2013 xdrive 320 d which is stuttering when accelerating it’s really a headache
I’m not sure where to start
Do I need to get injectors cleaning? Pls advise
Awesome tutorial☝🏽👌👍👏🏿
Your RUclips channel is absolutely wonderful I'm in my fifties and I just bought me a new E46 and I want to have that sound that you have on your exhaust system could you please tell me the specifics on what you have. Tks from NC
Thanks alot! Finally i got my thumb out and ordered new ones for my E90. Keep up the good work!!!
I unscrew the circle jack plate and put a cloth on it. Works like a charm for mine.
Great video 👍
Cool, bro, thanks.
👍 simple but something I’ve not checked .
Say less😂😂 I just had to change my leek detection 2 weeks ago good thing it was still under warranty🙏🏽
Hi, very helpful. I actually have a question on another mystery code that is showing up on my e91 (n51). The code read CDA7 and appears to be related to reverse gear status fault. The car goes to reverse gear perfectly and drives fine but the fault code always there. Would appreciate if you have any insight on this issue. Thanks
Thanks dude useful video
Thank you for your great video.
Hey you finally got jack pads and a puck! I use 4 pucks with my ESCO jack stands.. you can get the pads and pucks alot cheaper off Amazon.
Nice vid bro
I'm sure you already know but check your jack stands to see if they have been recalled. There is a big recall on Harbor Freight jack stands. Not knocking HF, it's just a very big safety issue if they were to fail.
Thank you
Thx a lot for been here for people
What about bmw X3 2006 like 125000 miles issues thx again .
Hi, I have just subscribed to your channel. What scan tool and app are you using? Can they also work on the E83 models? Thank you.
Hey bro !
Good videos!
Do u ou a faulty leak detection pump will cause alot clicking when im pumping gas in my 335i or could it be the vent valve! ?
THANKS ALOT 👍🏾
I’m on my 3rd BMW over 20 years. Never had an issue with leak detectors.
The plastic water pumps however...EVERY SINGLE CAR around 100K miles.
Looks like you did alright after the "Real World" thanks for the informative video!
OMG I just changed the DMTL pump a week ago. Super easy fix; I removed the carbon canister just like you did to get the T20 screws off, too. And I bought four new jack pads this week because I lost one to a speed bump. Great video.
Good episode.
Thank you for these
You're welcome :)
I have a question ?
Does an m sport rear bumper fit without any modifications I have a 08 convertible coupe want to switch rear bumper to m sport with a clean diffuser
Were those your codes? Im having a “dme mixture” code and not sure what it is, done research and there is a wide variety of remedies. Completely stock n54. Just replaced bank 1 o2 sensor but didnt bother to replace other one. Thanks
Hi! Could you please help me? I replaced all 5 light bulbs on rear right tailights and now they dont light up at all. I checked the wiring and one of the wires seems to have corrosion. Im trying to pull out to rewire but it seems its soldered on the other end. Do you have any idea or advice on how to fix it. I also replaced fuses if that helps
im had the dmtl code too on my 2001 740IL, im also a viewer from Florida
Helpful video.
Just bought 2 jack pad adapters 4 days ago lol. I was struggling working out where the jacking point was so I Googled it. They were £11.99 each in the UK. I even forgot to take the adapter out and drove 6 miles. Couldn't believe it stay in when I got back to take my wheel off again to paint my break calipers.
Bro, what the hell is up with your finger😂 my guts hurt when I saw that 3:58
OBVIOUSLY he is an alien😂🤣😂🤣😂🤣😂.
Lmfao🤣🤣🤣for real
Looks like hypermobility 👀
😂😂😂
Yo that finger is able to scratch areas that aren't supposed to get scratched..
Very educational
I bought that exact brand on dmtl pump and my light still stays on and also I am starting to have a rough idle I also changed the gas cap but apparently it’s very picky when it comes to the gas cap.
I have a 2011 320d MSport and after topping up with fuel one day I had a dip in power and the engine light came on. Happened a few times and after some digging found out about the petrol
Cap. Cleaned it all up, bought an OBD2 reader, no codes, no more light. Bizarre, although I do suspect it will be back at some point!
Great, thanks
Very informative video.
And wear safety glasses when under your car! LOL
Do many of these fixes also apply to the 325i? I'm looking to get one
That MHD scanner work well for all around problem codes and making changes such as in a i3 bmw tuning? I have a 2008 335i and it’s been very good, meaning problem free, I did get a lack of top end power recently, then the next time out a engine light, mechanic says I got a misfired #5 cilinder, I am thinking maybe a coil is getting bad? The car has less then 50k miles, I have to get a good scanner to give me better information. Would you recommend that MHD scanner, and another? Mine is the E90. That veinous video looked like maybe the think I should look at, but did it come up on a scan for trouble before you removed and cleaned it? Thanks a lot in advance for responding. Much appreciated videos and a new follower. Btw, if it is the #5 coil or plug, how does someone know which cylinder is which?
Literally just replaced my leak detection pump on my e93 just this last weekend
i made my adapter from hockey puck, works like a charm
Most new BMW do not come with a spare tire or jack. My question is specific to the jack itself. Can you use any standard scissor jack type of jack? Or must you have a special one from BMW? Asking because your jack seems to fit neatly in the plastic rubber spot under the car. It would be a pain if that means you need to use only a BMW jack.
Hey man could you help me out I had auto zone read the trouble codes & The most likely solution was replace camshaft position sensor CMP. Suggested parts “Distributor” I’m super confused because idk To much about cars but I’ve been trying to get into fixing my 2007 328i 120k miles. I love your videos as well as Danny Z. I’m trying to get mine up to par with y’all’s lol
What App Reader are U using for your BMW & can it also be used for Audi & VW ?
Thanks for the info though 💯👍🏾
Thank for posting the video, love it. let me know if you live near Davie, I ll bring over e90 328i so you can feature it in your future RUclips DIY videos. And of course I'll help out too..
Do you have any information regarding trans control on a e39 5 series. My car wont shift pass 2nd gear an d I can't understand why !
3:59 the hell is wrong with your finger bro? :D btw great video
He's double jointed...