Wow! I wish I had discovered this channel a month earlier! It would have saved me a lot of time! Had a lot of similar issues with my MB24 build, and just appreciate the solutions you've come up with for the details on getting the kit together. Thanks for sharing!
This looks Awesome Brother!!! I have a White MB24 Chasis kit coming soon. I gotta get some mofo trailing links and those axels......I can't wait to get started...
That’s pile of parts!! Damn in my region unsponsored btw it would take years to stack up so much. You sponsored I’m guessing. Consumerism at its peak huh
@@bcochener Just re-watching this MB24 vid as I've got one on the way with some ISO axles as well. Certainly would be as fancy a build though! :) Glad to see you got the motor/trans in without mod'ing. Seen a couple guys had to do some grinding out on the underside of the interior cockpit for fitting Venom brushless kits in. Looked like the wire bundle coming off the motor was the reason as it can't be clocked out of the way. I'm gonna use the Injora brushed I have, for now. Any thoughts on the motors (Furitek) that have that rather big motor wire bundle protruding and it it can be bent flatter or even un-soldered and attached differently to make it less bulky? Or any other trick you've found works? Thanks again! Bert the Weldor
Awesome video, super in depth and helpful to someone new like myself! At the end you said you didn’t know all those channels from the stickers, capecrawlers is super helpful to!
Holy hell. An I thought I was bad, I'm still attempting to build my mb24 it's literally like the actual truck. Sponsors an all custom made. Wheels mofo upws etc. Just haven't opened the newer jlu yet to swap it
@@bcochener Gotta get a build off you one of these days, the MB24 is an killer looking build. so hard to get all those parts here on Canada, the cost is just insane. for me to get two Mofo Servo's delivered its like 350 CDN. just insane. my builds are nothing great but i do enjoy building them with the parts i can get.
@@radioactivescalerc for sure brother. I’ll keep you in mind for sure. That is just insane the cost of US shipped parts! Is it duties or something coming into Canada?
@@radioactivescalerc still want to build that latest caged Injora buggy. I’ve done the older rail style they had. That buggy looks pretty good for the money, like the MB24. You get a lot for little.
Do tour film out side content like to see how some if your build work outcon real rocks .or you could send one to 24yep to test one . Be a good collaboration between you two
@@kylegibbs8153 I think I am going to send him a few. I just haven’t had a lot of free time to go film them lately. Barely managing to build them here and there. Hopefully some more running videos soon though.
Thanks! No I have not tried that one yet. I may direct power a servo on an upcoming build. Just wire one up that way. It’s a good option for anyone running stock 2 in 1 electronics. I was thinking on like a stock V2 ESC setup.
How would u suggest i would go about starting to build one of these? Im new to the 24 scale stuff.. always been into bigger scales.. but these are cool? Do i need to buy a scx24.. then just start buying the upgrades?
Yes, I’d probably start with an RTR to get familiar with them. The upgrades and options are endless, so it’s good to have a starting point. You’ll be building your own in no time!
@@mikeinvegas1 Strongest would be Mofo RC X15s. They have larger diameter inner axle shafts from TRX4Ms. Or, put a set of EXO.US U-joint CVDs in a stock axle, Super8, or Injora+4mm. Both have insane steering. Meus Racing makes some very nice Isokinetic axles that get really insane steering angle as well.
Awesome build, as expected. Going to have to swap mine to magnets I think. What size are you using? I assume they are pretty thin so as not to lift the body up.
Hey there, appreciate that Phil! Yes those mags are super thin for that reason. You can stack if needed for more hold or to adjust height. I get them from Lee Valley. They have adhesive on one side I peel off before I shoe goo them. I use the 1/4” ones. Link: www.leevalley.com/en-us/shop/hardware/rare-earth-magnets/magnets/disc/73479-adhesive-backed-rare-earth-magnets
Sorry to bother you again last question I promise lol. Do you think the LGRP billet transmission with furitek micro Komodo will fit? Thanks again for your time
I want a Fun Haver sticker sheet. If I was them I would sue Meus just for providing their fraudulent sticker sheet for it and force them to license Fun Haver and all it's sponsors. I would shame Meus but they shamed themselves totally.
Wow! I wish I had discovered this channel a month earlier! It would have saved me a lot of time! Had a lot of similar issues with my MB24 build, and just appreciate the solutions you've come up with for the details on getting the kit together. Thanks for sharing!
Appreciate that a lot! Great little kit in the end isn’t it!?
Nice as usual
@@dantrivett8435 thanks Dan!
Had to finish up watching a little after the premiere…. Such a rad build!!!
Thanks Jacob! Glad you could join for a bit!
Huge thanks for the shoutout/tag!!!!
For sure brother!
So sick as always Brian. That was the best hour of rc I’ve spent in a while.
Appreciate that Zach!
This looks Awesome Brother!!! I have a White MB24 Chasis kit coming soon. I gotta get some mofo trailing links and those axels......I can't wait to get started...
Appreciate ya! Thanks for coming out to the Premiere!
@@bcochener Your Welcome Brother
That’s pile of parts!!
Damn in my region unsponsored btw it would take years to stack up so much. You sponsored I’m guessing. Consumerism at its peak huh
Nope, not sponsored, I purchase my parts.
Seriously expected that Nano Beast to just disappear in a flash, or open a worm hole! LOL! Wow!
Haha, yeah that thing was purring!
@@bcochener Just re-watching this MB24 vid as I've got one on the way with some ISO axles as well. Certainly would be as fancy a build though! :) Glad to see you got the motor/trans in without mod'ing. Seen a couple guys had to do some grinding out on the underside of the interior cockpit for fitting Venom brushless kits in. Looked like the wire bundle coming off the motor was the reason as it can't be clocked out of the way. I'm gonna use the Injora brushed I have, for now. Any thoughts on the motors (Furitek) that have that rather big motor wire bundle protruding and it it can be bent flatter or even un-soldered and attached differently to make it less bulky? Or any other trick you've found works?
Thanks again!
Bert the Weldor
Man I love this build Brian!
Hell yeah, she’s a beauty!
Awesome video, super in depth and helpful to someone new like myself! At the end you said you didn’t know all those channels from the stickers, capecrawlers is super helpful to!
I appreciate that. Glad it was helpful!
Holy hell. An I thought I was bad, I'm still attempting to build my mb24 it's literally like the actual truck. Sponsors an all custom made. Wheels mofo upws etc. Just haven't opened the newer jlu yet to swap it
😂 Yeah, same here. Had to mimic the real F-H as much as possible. Good luck with your build, hope this helps! Cheers!
@@bcochener it gave me alittle boost to get to it that's for sure, maybe I'll post it on here
Great Build, was thinking of ordering one of these chassis kits myself, so enjoyed watching your walk through of it.
@@radioactivescalerc appreciate ya RAS!
@@bcochener Gotta get a build off you one of these days, the MB24 is an killer looking build. so hard to get all those parts here on Canada, the cost is just insane. for me to get two Mofo Servo's delivered its like 350 CDN. just insane. my builds are nothing great but i do enjoy building them with the parts i can get.
@@bcochener My favorite these days are the injora buggies, built two so far and just love there capability.
@@radioactivescalerc for sure brother. I’ll keep you in mind for sure. That is just insane the cost of US shipped parts! Is it duties or something coming into Canada?
@@radioactivescalerc still want to build that latest caged Injora buggy. I’ve done the older rail style they had. That buggy looks pretty good for the money, like the MB24. You get a lot for little.
Wow looking super cool
Thanks Andy. Yeah this thing is sweeet!
Do tour film out side content like to see how some if your build work outcon real rocks .or you could send one to 24yep to test one . Be a good collaboration between you two
@@kylegibbs8153 I think I am going to send him a few. I just haven’t had a lot of free time to go film them lately. Barely managing to build them here and there. Hopefully some more running videos soon though.
Awesome build ! wondering where can I get those green beadlock rings on the type B,new ones do not offer green ring+black rims set-up.....
@@boshenjia7217 appreciate that! These green rings came with silver type Bs. The older style (non removable hubs)
@@bcochener Gotcha ! too bad they discontinued the older version...
@ yeah, it’s a bit differ t color green now they use as well.
@ yeah I think I’ll polish mine and paint lime green to match the body color lol 😊
Awesome build looks insane. For most of your comp builds would you recommend Flysky or Furitek transmitter?
@@cyba888 Thank you! I don’t have any of the Furitek radios. I have 3 Flysky GT5s (2 full @ 20 rigs each). So I guess I will recommend that one 😂
appreciate the info. Serious question you want to sell this car I'm in love with it 😊
@@cyba888 after I do a big overview of em all, I plan to sell some to clear the decks so to speak. Not sure when, but I will post up. Cheers!
@@bcochenerok thanks!
So awesome! Mofo just dropped a direct power servo, do you have any experience with it?
Thanks! No I have not tried that one yet. I may direct power a servo on an upcoming build. Just wire one up that way. It’s a good option for anyone running stock 2 in 1 electronics. I was thinking on like a stock V2 ESC setup.
How would u suggest i would go about starting to build one of these? Im new to the 24 scale stuff.. always been into bigger scales.. but these are cool? Do i need to buy a scx24.. then just start buying the upgrades?
Yes, I’d probably start with an RTR to get familiar with them. The upgrades and options are endless, so it’s good to have a starting point. You’ll be building your own in no time!
@bcochener thank u.. whats the strongest axles for the scx24?
@@mikeinvegas1 Strongest would be Mofo RC X15s. They have larger diameter inner axle shafts from TRX4Ms. Or, put a set of EXO.US U-joint CVDs in a stock axle, Super8, or Injora+4mm. Both have insane steering. Meus Racing makes some very nice Isokinetic axles that get really insane steering angle as well.
Awesome build, as expected. Going to have to swap mine to magnets I think. What size are you using? I assume they are pretty thin so as not to lift the body up.
Hey there, appreciate that Phil! Yes those mags are super thin for that reason. You can stack if needed for more hold or to adjust height. I get them from Lee Valley. They have adhesive on one side I peel off before I shoe goo them. I use the 1/4” ones. Link: www.leevalley.com/en-us/shop/hardware/rare-earth-magnets/magnets/disc/73479-adhesive-backed-rare-earth-magnets
@@bcochener Awesome, I'm getting straight on that! Again, top class build and video. Well done that man!
Party time
Looking forward to it!!
I know where you got the rear trailing arms from but where did you get the rest of the front and rear Links at???
They are Injora stainless steel links. Deadbolt rear uppers from a set I had leftover, and a JLU/C10 front links set.
@@bcochener Thank You so much for the info Brother. Your video is very informative and well done. I will be starting a Build with the MB24 soon.
@@familykrawlers appreciate that! It’s a super cool little kit, I think you’re going to enjoy the build!
@@bcochener I agree Brother. I can't wait to show it off....
SMASH the 👍 everyone
Lol cheers ! I forgot 😂
What rear suspension setup is that (links)? Build looks rad!
Thanks man. Just Deadbolt upper rear links. Trailing arms are same length as DB lower rear links.
Sorry to bother you again last question I promise lol. Do you think the LGRP billet transmission with furitek micro Komodo will fit? Thanks again for your time
@@cyba888 likely can make it work on a forward motor mount… I assume is what you mean. Maybe w/ a little interior mod?
@ yes that’s the answer I was looking for thank you
Oh man killer build! Any idea when the jazz boat sides will be available?
Not sure if he is going to produce them or not. he mentioned letting WTMicro offer them as an option when ordering the body. Not sure though.
Mofo rc 💯💣🦾
Great build . A lot of inspiration for mine 👌 Sub your channel 👍👍
Appreciate that! Thanks for the sub!
Must be nice to have your money.
Holy cow man.
I could always use more. But couldn’t we all… lol
What battery will fit on the slider?
@29:45
How can I get in touch for an address and info on coming out to the Exoplex? I'm in the Arlington area of Jacksonville. And I run scx24s. Lol.😅
@@handymanhaynes ?? Maybe contact youtube.com/@exocagedrc?si=mwUVuF_EkU7DgVFY
@@bcochener thank you. I was watching one of your videos early. Lol. Old Mad Max 2.
Oh to be a single man... 😂
😂 well, there are pluses and minuses…
How final project costs?
Not sure. But not cheap with the brass axle S8s, Treal parts, motor/ESC, 3 sets of wheels & tires.
I want a Fun Haver sticker sheet. If I was them I would sue Meus just for providing their fraudulent sticker sheet for it and force them to license Fun Haver and all it's sponsors. I would shame Meus but they shamed themselves totally.
"PromoSM" 🤭