Installing 20" AuxBeam LED Light Bar: Jeep Grand Cherokee
HTML-код
- Опубликовано: 18 окт 2024
- In this video I show you how I installed my 20" LED light bar from Auxbeam. It came out great with the small modification to drop it down about an inch lower than the factor bolts.
Thanks for the help: @nightshade_wk
Auxbeam 20" Light Bar: amzn.to/2LHjPsV
Wiring Harness: amzn.to/2JfDPoe
Instagram: bmb_m3
DM me on instagram for $10 off www.luxangeleyes.com
For 10% BPM Sport tunes, use code "brandonbm3"
www.bpmsport.com
Gear:
Camera - Canon G7X: amzn.to/2pMhMv8
External Hard Drive: amzn.to/2qKaAwQ
SD Card: amzn.to/2rcaQ8n
Small Joby: amzn.to/2perpzx
Larger Joby: amzn.to/2peqUpg
GoPro Session: amzn.to/2sVXgaJ
Dual Suction Cup Mount: amzn.to/2shzjg7
Single GoPro Mount (inside): amzn.to/2shBQGT
Interior G7X Suction Cup Mount: amzn.to/2rcjvYH
Spigen Phone Case: amzn.to/2rc6xu5
Spigen Magnet Mount: amzn.to/2sVXm1Q
Car Care:
Lexol Leather Cleaner: amzn.to/2yZLoaZ
Lexol Leather Conditioner: amzn.to/2A1I3Z9
Gyeon Leather Coat: amzn.to/2A1OM5c
CarPro Dlux: amzn.to/2yyGm6P
CarPro Flyby: amzn.to/2xQ3I9a
Powerlock: amzn.to/2yrY1Ly
Collinite 845: amzn.to/2ysAVGm
CarPro DLUX: amzn.to/2kRbx8v
CarPro Flyby: amzn.to/2yti5yO
Interior Detail Brushes: amzn.to/2eElJyB
Exterior Detail Brushes: www.carpro-us....
CG Clean Slate: amzn.to/2zgTpZ1
Meguiar's APC: amzn.to/2zgLCu9
GLISS: amzn.to/2Hi6N1Z
Cquartz UK: amzn.to/2yLBTyP
Pluffle Drying Towel: amzn.to/2yf16P9
Wheel Cleaner: amzn.to/2kf4jLp
HD Wheel Cleaner: amzn.to/2yPJol3
Rubber Cleaner: adamspolishes.c...
hey you got to get the halo ring lights with projector....I paid about 118 bucks and hooked them up...it compliments the jeep and adds more light with a wider beam....
Looking into putting hood pods on my 5.7 commander, can’t find anything anywhere on how to do it but thank god the Laredo’s and commanders share almost every engineering aspect 😅, really good video for the average broski unlike a lot of the cut and crop videos that focus more on the stallation of the light Han how to get the switch into a convenient location. I was set on getting a toggle switch but after watching this the single button with adhesive is a much better option for our style dash layout. Other than my vehicle having extensive paneling that covers the smaller grommet hole I’ll be following this video religiously for my installation. Kick ass video brother!!
BoostedZ71 RC look on JBA Offroad they have everything for you
Perfect match for a concrete curb stop. Brilliant!
The light is really bright. And the license plate bracket is not obscuring it at all.
I love the stock look with just a lil extra.
I just got my first jeep (WK) and ill be watching all your videos. great videos so far.
Awesome! I just installed some pod lights on the jeep and should have a video up soon
I know this is a 2 year old post I'm just curious if the light bar survived? I'm wondering about rocks getting kicked up from cars in front of you. Thanks.
Light bar seems good under my ownership!
Nice job! Do you think it will affect that condenser behind it?
Awesome video! I'm still nervous about the electrical tho. Any difference for the crd version?
I just don't like that it's blocking airflow to that radiator. But easy set up though!
Gonna use your idea on my 06 WK. Thanks for the vid man!
I've got 3" cubes in my fogs. Love blinding sheriffs with them by "accident".
How does it actually look off road at night. Is the visibility much better or is the light just sitting too low?
Hi big man
How does it look in night time ?
Looks awesome and love the jeep! I got a similar setup but my jeep is red. That light bar wouldnt work for me in Minnesota driving through snow would rip it off
Got my daughter one for her 05. A 20" nilight. Not sure we're to mount the switch though.
Stupid question here... if you don't want to use your regular fog lights, can you use the wiring from that?
hey bro looks sick.what roof rack is this?
Awesome job! I'll definitely be doing this. How is that light holding up?
so far so good!
Instead of just setting the relay down like that. You can just take out a screw, put the screw through the relay and bolt it back up.
How did you tighten that nut inside that bumper rail? It's giving my fits!
Toby Noe wondering the same thing. That’s a pretty tight spot. Afraid it’ll come loose over time.
What size wheels do you have on there and you have a level kit on it?
with tinted windows and smoked tail lights on my wk ive been considering something like this for front and rear.. that way i can use for normal reverse light if needed too. remember not to run this on the street lol.. pretty sure its illegal. i live in the cornfields of sw indiana now but i grew up in cincy.. im sure theyd love to pull you over for this.
How high is your lift, i was thinking about doing mine. But was thinking 2 inch
Hi I was wondering how you attached the brackets with the kit cause you didn’t show us how you attached it to the light bar I’m just wondering cause I have the same light bar but idk how to attach the brackets
Good job brah
What are the red metal hooks in the front? Sorry, if this is a dumb question -- looks great!
Tow hooks
You forgot to appreciate the pre drilled holes in the bumper lol
need a video at night so we can see how it look and how far do it shine
Any ideas how you'd find a good ground stud for a 2015 GC? It's under the passenger seat, so I'm having a difficult time. Thanks!
I had my 52 inch on my roof rack and it was loud and it killed my fuel mileage so I took it off
+30 HP when the light is on.
Maybe I should get another one 😏
Where did you find those red tow hooks...love em
I painted the ones that came on it
What size bolt and spacer?
That's definitely illegal here in Illinois, asking for a $120 ticket 👌
Ryan Hanlon so stupid isn’t it...yet illegal aliens are allowed to get driver license in Chicago? Am I correct...
The light bars come in different types. Some are offroad models some are designed and label as snow/fog lights.
Yesssss
Omg nightshade!!
Great jobs I looking to install step by step ?!? Please help me
Where did you get those recovery hooks at? I cant find any to save my life
I ran into the same problem. I ended up ordering recovery plates that shackles can mount to from the steel armadillo. Not the same thing but I hope this helps.
Have you thought about wiring it to your auto head lights on a 3 way switch and taping it into high beam fuse that way you have a alternative choice to run it independently or when your high beams come on. If so do you have any suggestions on how i could do this with my 05 jeep grand Cherokee limited. Any suggestions would be a big help
+Travis Lewis I am actually working on a 3 way switch as you mentioned. It will run off the battery, but only have power when the key is in the ignition. I will use a switch panel from Steel Armadillo and switches from OTRATTW. Please stay tuned I will be working on the next steps. brandon@shifted-perspective.com
Where’d you the tow hooks???
do you have link for buy theses red piece for pull ?
Does the switch come with the light or the harness?
The harness
No night testing
Nice! U couldaily that and make the m3 extreme af! Mind if I ask if you have an email you mind sharing? A channel email even? Also curious what you think the sweet spot is year wise for e92 m3’s value wise
The link is wrong
You should have spliced into the oe lights or at least the fuse box instead of running to the battery. SMH LOL
Athletesperformance1 could I run halo and fog lights from same harness?
Can you tell me how long the fastener and spacer are for the bracket?
An inch
What are these brackets called
Not a great spot, unless you are keeping it on the road
@kyleforbes