I always just leave the lights on for like 3 days before removing the boiling hot bulb *with my gooch.* AnywhoOoOo, *Outstanding presentation* with meticulous editing that was *helpful, clear & concise!* Thanks, fam!
hello and thanks for your precision in the details of changing bulbs on the jeep grand cherokee 2005 2010 .... I have an overland of 2007 and I would like to change them all ... are you so kind to give me all the specifications of the bulbs ??? a greeting from Milan thanks
Hi! Your 2007 Overland is compatible with the kit we used in the video. The map and trunk would use a 42mm fitment, the dome, footwell, glove box, and license plate use a T10 fitment, and the vanity mirrors use a 29mm fitment. You can view quantities directly on our package here: www.precisionled.com/jeep-grand-cherokee-premium-led-interior-package-2005-2010.html?
This was a great video - used it for 2012 Jeep Liberty. My only issue is the 2 rear dome lights (the back seat lights with handles). When I put in the LEDs, the lights go on when the doors open. However if you click on the light manually to turn on when the door is closed, they have a very dim glow and do not light up fully. I tried two different brand LED bulbs to replace the 2825 halogens - same result. . Any suggestions to get them to work?
Is there a video for the trunk light kit install? I couldn’t get the instructions to load. Also do you make a center console kit? My lights are all pretty much out! Merry Xmas!
I think that piece blocks the light from blinding you? Lol. I'm not sure about that but I thought about it when I was changing mine, I'm not very smart about mechanical problems, I'm a carpenter.
I think that piece blocks the light from blinding you? Lol. I'm not sure about that but I thought about it when I was changing mine, I'm not very smart about mechanical problems, I'm a carpenter.
Unfortunately we do not offer red, we carry two colors temperatures, 6000k crystal white and 8000k cool white. Our LEDs when properly installed will not flicker or give out, and we stand by our products with a limited lifetime warranty!
This is often an issue with lower quality LEDs. There is always power running through LEDs, so sometimes they will just dim instead of turning off completely.
The map and trunk would use a 42mm fitment, the dome, footwell, glove box, and license plate use a T10 fitment, and the vanity mirrors use a 29mm fitment. You can view quantities directly on our package here: www.precisionled.com/jeep-grand-cherokee-premium-led-interior-package-2005-2010.html?
It drives me nuts to see you so easily pull out the glove box bulb. Mine is so tight in there I have to take my glovebox out to get to get, because I damn near injured my wrist trying to pull it out of the socket.
I always just leave the lights on for like 3 days before removing the boiling hot bulb *with my gooch.* AnywhoOoOo, *Outstanding presentation* with meticulous editing that was *helpful, clear & concise!* Thanks, fam!
Brent, your videos are always so awesome 👏 Thank you so much for covering another vehicle.
🙏
Just did my son's 07 with your guidance! Great video!
Amazing improvements to the quality of the lighting!
Thanks for tuning in!
Genial, tengo una camioneta igual y no consigo esos accesorios
Great video, helped me for my 07 Jeep!
Thanks for making this helpful video 👍🏻
Thank you for tuning in!
Thank you.
Thanks for the video much appreciated.
Nice video. Now I have knowledge to do my lights.
Thanks
Do you have any videos for the Jeep commander?
Thanks
You make it look easy. Hope so.
hello and thanks for your precision in the details of changing bulbs on the jeep grand cherokee 2005 2010 .... I have an overland of 2007 and I would like to change them all ... are you so kind to give me all the specifications of the bulbs ??? a greeting from Milan thanks
Hi! Your 2007 Overland is compatible with the kit we used in the video. The map and trunk would use a 42mm fitment, the dome, footwell, glove box, and license plate use a T10 fitment, and the vanity mirrors use a 29mm fitment. You can view quantities directly on our package here:
www.precisionled.com/jeep-grand-cherokee-premium-led-interior-package-2005-2010.html?
This was a great video - used it for 2012 Jeep Liberty. My only issue is the 2 rear dome lights (the back seat lights with handles). When I put in the LEDs, the lights go on when the doors open. However if you click on the light manually to turn on when the door is closed, they have a very dim glow and do not light up fully. I tried two different brand LED bulbs to replace the 2825 halogens - same result. . Any suggestions to get them to work?
Do you have to use the map light heat shields with leds?
Are the tools plastic? Tried changing a bulb with a small screwdriver and bam! No lights are working on the interior? Can anybody help me please?
where can i find replacement rear dome covers for the back seat lights? i messed up the covers by accident installing LED’s.
Thank you
You weren't lying about the license plate bulbs being hard to access. I had to have my kid with smaller hands to put the new bulbs in.
Do you have a link to this
LED kit amazing job. Great description of the process!
Hi! Thanks for watching! Here is a direct link to the kit we used in the video:
bit.ly/2CSKJet
Is there a video for the trunk light kit install? I couldn’t get the instructions to load. Also do you make a center console kit? My lights are all pretty much out! Merry Xmas!
@@shawnconrad9292 Unfortunately we do not make a center console kit, but please check out 8:03 in the video for the trunk light install!
Do none of them need resistors?
Hice el cambio a LED pero no encendieron, se quemaron las luces? Volvi con la ampolleta antigua y no entiende. AYUDA
Does it matter if you put the metal piece back in when installing the dome lights up front? Seems like that metal piece blocks the light
I think that piece blocks the light from blinding you? Lol. I'm not sure about that but I thought about it when I was changing mine, I'm not very smart about mechanical problems, I'm a carpenter.
I think that piece blocks the light from blinding you? Lol. I'm not sure about that but I thought about it when I was changing mine, I'm not very smart about mechanical problems, I'm a carpenter.
My question is how well do they work? The new bulbs by that company?? Dont wanna purchase them n for them to give out or start flickering days later
And by any chance do you know were I can them in red 🤷🏽♂️
Unfortunately we do not offer red, we carry two colors temperatures, 6000k crystal white and 8000k cool white.
Our LEDs when properly installed will not flicker or give out, and we stand by our products with a limited lifetime warranty!
Were these 6000 or 8000
Did u remove light in door? That bottons to open Windows , dunno how to replace old 1 with leds, also main speed metter light s
These lights are most likely stock LEDs, which cannot be replace as they are soldered to a chip and board.
How can I get my LEDs to turn off all the way in my 2007 Jeep grand Cherokee Laredo?
This is often an issue with lower quality LEDs. There is always power running through LEDs, so sometimes they will just dim instead of turning off completely.
Do this bulbs stay dimeed when turned off?
Hi! No, our bulbs are designed to function exactly as your halogens do, they will indeed turn off.
Could you tell me what size bulbs were used and quantity thanks much
The map and trunk would use a 42mm fitment, the dome, footwell, glove box, and license plate use a T10 fitment, and the vanity mirrors use a 29mm fitment. You can view quantities directly on our package here:
www.precisionled.com/jeep-grand-cherokee-premium-led-interior-package-2005-2010.html?
Does the wk use can bus compatible bulbs?
Yes, we only sell high quality CANBus LEDs!
Is that jeep mat or wrapped? And what color?
We will try to reach out to the owner and find out!
It drives me nuts to see you so easily pull out the glove box bulb. Mine is so tight in there I have to take my glovebox out to get to get, because I damn near injured my wrist trying to pull it out of the socket.
Where site can I order this kit
Check us out on precisionled.com! product links are in the description as well
No link to purchase......another waste of time.
Hey, It's in the description. You will find links for both Standard (bit.ly/32JuHhe) and Premium (bit.ly/2CSKJet)
No
Nearly $100.00 for a hand full of bulbs. Yeah, good luck with that.