I’m a beginner for sure mixing my own vocals for some reason my vocals has been really louder than the actual beat but I’m about to try this technique hopefully I can get my vocals to sit in the beat tight thank you for all the gems you share big bro
your mic input is probably set too high. Also, the beat may have been bounced out too low. i like to make sure my vocals when recording are at about -5 to 0db. Your beat should sit around 0db to leave some headroom for the vocals. And when recording i leave both the beat and vocal tack at 0 then mix. I should mention that i also send my mic input into a bus track with a compressor on it and then bus that signal to an audio track to record.
Another great job, and what a fine vocalist. I often do use the Vocal Rider as a first step, but I only use it to write an initial automation track, because it only takes a few seconds. That gives me a rough automation, based only on the amplitude of the wave. So then all I have to do is use my ears, which I do trust, to fine tune the automation that Vocal Rider wrote. I also use the clip gain feature during the mixing process, which is essentially the same in Studio One, my DAW of choice.
Vocal rider is obsolete. Nectar 3 has that built into the input of the signal now. And you can get nectar 3 PLUS for $50 right now normally about $500....Vocal rider is $29 and cant compare to be Nectar....EVER!!!
@@EliteOnTheBeat nectar 3 the sauce fr. My normal vocal chain that seems to work great for my voice is Arturia 1073 preamp, going into Nectar 3 and then sometimes soothe 2 if I need extra control
Ima be real, my favorite plug in to sit vocals in the pocket is easily wavesfactory trackspacer with the side chain… nothing compares… especially for A 2 track beat… don’t have to eq much in the presence range for the beat
thanks wavy Wayne just tried the clip gain tip it works awesome always had to make a break between what I had to adjust but not anymore thanks to you buddy thank you
Turn down the attack an release on ur auto tune setting. If u can't then try the old tpain plug in where u can go from soft(which is little to no auto tune) or hard which is the opposite. A lot or all the way. Tighten it up how? In the mix? Try some reverb/delay
Can You Do a tutorial video explaining the Waves Vocal Rider? I feel it can help for tracking but if there’s any tips I’d love to see you spit game about that plug in. I use about 50% of the time. Or if you could do a break down on the Sibilance Plug in From Waves do i can get a better understanding I’d hella appreciate that as well. Thanks WavyWayne for another dope tutorial.
If you go to the clip right click the menu pops up....go to clip gain, hit show line.....you can then have it there if you need it.....Now all you have to do is lower what you want w/o the hot key......Just another option.
I am from Kenya, but I have been watching and getting inspired from your video tutorials. So much to learn from. How can I join the Navy Seals Elite? Help a brother :)
I’m new and don’t know if you’ve done this but you should do a tutorial of mixing and mastering a song in a series from start to finish. And if you have something like that put it in a playlist so everyone can access them in one go.
U always been dope asf doe I look at your videos every time I need to find some out but I still be tripping on the identify beat part but I think I got it 🤦🏾🤣😂😅
On the Wavy Seals…is there an evaluation to see where a person stands in their producing to date and is it exclusive to pro tools users only? I use live 11.
Hi men i been whaching your videos (from Chile) to improve my mix, i bought an scarlett 2i2 third gen and i record miself tried to mix and master online for free hahaha The thing is can you make at least close profesional work with this equipement and free plugins??? If you can do a video showing how to mix from start to end with free plugins i usully have an intro, lead voice, chorus, outro and some efects voice. And thanks i deffenilly learn a lot with you, blessings from Chile
I been rocking wit you for over 3 years. It time I join the Navy seals outta respect. You really the Goat in this engineering industry
Thanks bro. Tap in and let’s grow. 💯
you won't be disappointed my brother we all growing in the Elites... Hope to see you there..GB
Squad Up
id join to to grow even better as an self engineer
@@waynewav how do i join the wavy elite im ready
U are the best Protools instructor on RUclips.....Keep dropping gems......Salute!!!
I’m a beginner for sure mixing my own vocals for some reason my vocals has been really louder than the actual beat but I’m about to try this technique hopefully I can get my vocals to sit in the beat tight thank you for all the gems you share big bro
Please give my music a chance 🌌 you won't regret 🔥
Bro sAme
Try adjusting your mic levels you should do mic check in every studio wavy showed me that if adjust your levels before recording
your mic input is probably set too high. Also, the beat may have been bounced out too low. i like to make sure my vocals when recording are at about -5 to 0db. Your beat should sit around 0db to leave some headroom for the vocals. And when recording i leave both the beat and vocal tack at 0 then mix. I should mention that i also send my mic input into a bus track with a compressor on it and then bus that signal to an audio track to record.
Set volume to -12db before recording vocals. Thank me later. That's how pros do it
Another great job, and what a fine vocalist. I often do use the Vocal Rider as a first step, but I only use it to write an initial automation track, because it only takes a few seconds. That gives me a rough automation, based only on the amplitude of the wave. So then all I have to do is use my ears, which I do trust, to fine tune the automation that Vocal Rider wrote. I also use the clip gain feature during the mixing process, which is essentially the same in Studio One, my DAW of choice.
I find vocal rider does an incredible job. You can also write the ride as automation and tweak it if needed.
Vocal rider is obsolete. Nectar 3 has that built into the input of the signal now. And you can get nectar 3 PLUS for $50 right now normally about $500....Vocal rider is $29 and cant compare to be Nectar....EVER!!!
@@EliteOnTheBeat nectar 3 the sauce fr. My normal vocal chain that seems to work great for my voice is Arturia 1073 preamp, going into Nectar 3 and then sometimes soothe 2 if I need extra control
1st of all I can't get over how much hardware you have 🙌🏿🙌🏿🙌🏿.
2ndly great tutorial 🙏🏿🙏🏿
Her vocals sound angelic and smooth
Intelligent, articulate and very useful with high production values. Well done indeed.
Ima be real, my favorite plug in to sit vocals in the pocket is easily wavesfactory trackspacer with the side chain… nothing compares… especially for A 2 track beat… don’t have to eq much in the presence range for the beat
I struggle with this a lot. I usually get the track sent to me so I have to mix my own vocals and that can be tricky. Thanks so much for this!
Wanna collab
Definetly good pointers bro keep it up. Us lil artists appreciate ppl like you 💪
Definitely gonna have to tap in on the elite appreciate all that you've showed me the past 2 years.. learn something new every video
Wave wayne always know when to put the most needed video up lol. Salute❗
thanks wavy Wayne just tried the clip gain tip it works awesome always had to make a break between what I had to adjust but not anymore thanks to you buddy thank you
That track is dope her voice n the music chords.. sweet bro
Luv ya channel u basically taught me everything I know on mixing 🎙 and ya Wife track sound 🔥 deadass Wavy 🌊
Thank you for that shift control technique to lower the gain on a section
Another master class! Thanks Wavy.
Wavy the real goat
You’re wife (Olivia) should already be famous she is on the way 🕊🕊🕊🕊 Teamwork
Class in session.
love your vidz wayne!
Ayeee God Bless you Champ! Love the content bro 🙌🏾🤝
Thanks fam.
Excellent Thanks
bro you be getting to the bag
Crazy like 3 years ago we was using that vocal rider .. everybody learns
The wait is over I'm joining wavy elite
Loving that classic VU meter over there.
job well done on the ep. added to my playlist
the thumbnail worked
I'm old school 🏫 it's ALL about creating space.
A lot of Knowledge in the elites
Always chkin in on ya as i move thru logic pro x. Big luv
New to it but I'm lucky I came across this
nice love your work always dope bra blessing
I been down with 🌊 now this is the video too take my skills to the next level love the clip gain technique. ✊🏿✊🏿✊🏿💪🏿
Thank you I learned so much!!!
I been watching your channel so long and can’t believe I wasn’t subscribed 🤦🏾♂️🤦🏾♂️🤦🏾♂️…
SMH
Thank you for your vids man fr. Can you do more studio one content.
Great vibe bro. 💯, automation are not just for the vocals !! Use them every where and also on reverb/delay bus
Aye this legit was helpful, thank you dawg.
Thank You brother🙏🏽
The wavy way 🔥🔥🔥
Congrats on 200k 🔥🔥🔥
damn bout to have a baby to that track
Crazy vybz
Aye mane
"Aye Mayne"
The goat
Nah that thumbnail 🔥🔥🔥
this was detailed and real perspective! but yoo where's the link to the song!!!?? lol
i built a vocal chain that sounds good to my ear but now I want a more humanized less autotuny vocal and tighter vocals
Turn down the attack an release on ur auto tune setting. If u can't then try the old tpain plug in where u can go from soft(which is little to no auto tune) or hard which is the opposite. A lot or all the way. Tighten it up how? In the mix? Try some reverb/delay
The song fayaaaa💯🔥🔥🔥
Im back "TO LEARN SOMETHING" #Salute got me thinking about switching from abelton to Pro tools for your course next year
Can You Do a tutorial video explaining the Waves Vocal Rider? I feel it can help for tracking but if there’s any tips I’d love to see you spit game about that plug in. I use about 50% of the time. Or if you could do a break down on the Sibilance Plug in From Waves do i can get a better understanding I’d hella appreciate that as well. Thanks WavyWayne for another dope tutorial.
Thanks wavy this definitely helped a lot man your gems always I big help
If you go to the clip right click the menu pops up....go to clip gain, hit show line.....you can then have it there if you need it.....Now all you have to do is lower what you want w/o the hot key......Just another option.
03:32 when you swallowed, I felt that
Thank you!
I am from Kenya, but I have been watching and getting inspired from your video tutorials. So much to learn from. How can I join the Navy Seals Elite? Help a brother :)
Hey bro. To join visit courses.wavywayne.com
@@waynewav Thanks a lot bro, looking forward to join the elite team asap. I want to join in January, is it possible
I Love your videos bro thanks for making videos tryna help us out with the vocal mixes we be tryna work on
❤️ you wavy 〰️
This song sliding 😀
mannn, song is fckn fire!! Yeh tell her to release that joint lol.
seen u on tiktok
No lie this my biggest hard ship
I’m new and don’t know if you’ve done this but you should do a tutorial of mixing and mastering a song in a series from start to finish. And if you have something like that put it in a playlist so everyone can access them in one go.
He’s done just almost about everything. Check out his page
U a lil late
hey wavy can you do a tutorial; on exactly what plugins you need to record ;logic pro x and how many is to many plugins on one vocal chain
U always been dope asf doe I look at your videos every time I need to find some out but I still be tripping on the identify beat part but I think I got it 🤦🏾🤣😂😅
UpChapp wavy boss
Active
Spectralayer and master with wavelabs
Bro it’s all about level control
Can you do more updated engineering videos & tutorials
Real teacha you be soon join the class and yemon learn smthn new so on question how you get your music to be in one track and still separate
💯💯💯
Nice video
What is your vocal chain going in and do you use 44 or 48 sessions???
Any studio one beat mixing templates?
yall wanna have 7:38
Do you do dancehall templates?
You should do fl studio tutorial
Dope vid where do I get that UFO shirt from?
Can you do this for logic
💯✍🏽
On the Wavy Seals…is there an evaluation to see where a person stands in their producing to date and is it exclusive to pro tools users only? I use live 11.
How much you charge for one on one training sessions for mixing?
Where you get ya plugin at bro?
Any tutorials on Studio One 5 ? Im not on Protools Bro
Yooo WavyWayne... you with pro tools 12?
Can u do videos for FL Studio
How do I get the clip gain line through the clip so I can see it
Right click and choose to show clip gain line
Hi men i been whaching your videos (from Chile) to improve my mix, i bought an scarlett 2i2 third gen and i record miself tried to mix and master online for free hahaha The thing is can you make at least close profesional work with this equipement and free plugins??? If you can do a video showing how to mix from start to end with free plugins i usully have an intro, lead voice, chorus, outro and some efects voice. And thanks i deffenilly learn a lot with you, blessings from Chile
What mouse do you use? I couldn’t find it in the studio gear video
I'm proud if you
I just got curious… Who doesn’t have a scroll wheel ?
Can you point me to somebody knows how to mix and can hire them
I love. Ur vídeos but please, change the beat that Sounds in ur intros
Do anybody use Cubase 11
Let me be your intern for a lil while