2013-2018 Ford Focus ST Baffled Oil Catch Can Installation Guide By Mishimoto
HTML-код
- Опубликовано: 6 окт 2024
- Product Page: mishimo.to/1Ydrqi8
Facebook: / gomishimoto
Twitter: / mishimoto
Instagram: / mishimoto
Engineering Blog: engineering.mis...
2013-2018 Ford Focus ST Baffled Oil Catch Can, PCV Side
• Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter
• Application specific bracket mounts the can in a serviceable location underneath the vehicle
• EPDM rubber hoses come pre-molded for a reliable install
• Catch can located in convenient location next to the transmission, can be serviced during every oil change
• Billet 6061 aluminum sealed can
• Defends intercooler, intake system, and essential components from oil blow-by
• Helps reduce carbon build-up on the intake valves
• Helps maintain proper octane levels to reduce potential detonation
• Filters and can are fully serviceable
• Internal air diverter turbulates air longer to improve oil separation
• Mishimoto Lifetime Warranty
Model: MMBCC-FOST-13PBE
Disclaimer
• Please dispose of any liquids properly.
• Allow vehicle to cool completely prior to attempting installation.
• Mishimoto Performance (MP) is not responsible for any vehicle
damage or personal injury due to installation errors, misuse,
or removal of MP products.
• MP always suggests that a trained professional install all
MP products.
• Do not run the engine or drive the vehicle while overheating.
Serious damage may occur.
• Raise vehicle only on jack stands or on a vehicle lift.
I finally installed it and just after 2 heat cycles (over 1 day) there’s already some surface oil in the can! This stuff really works, I can’t ask for a better can cause I already have it
Wow, that front bumper chin has seen better days! Still, from what I've read with the EcoBoost engines, this is a rather critical modification as the DI system doesn't wash the oil off the valves like the port injectors used to.
jeez im so happy i have a fiesta st. and i dont needa take off my intake manifold just to put a catch can.
why would you mount the catch can there...most painful place for that thing....
2wheelLove for make it to remember you have mishimoto catch can
Well, it's out of the way, and with it being low, it would make it harder for 'heavy' oil vapors or droplets to make it back up into the intake.
Also, when you do an oil change, you'd have a reminder to drain the catch-can.
Does the filter in the catch can last for the life of the vehicle? I found a generic catch can on mountune's website that has you replace their little white filter every so often
This filter is made of brass and is not required to be replaced.
@@mishimoto Yo that's so cool I'm really glad that's the case
Ok but how do you drain it?
The bottom of the catch can unscrews from the top so the content can we emptied. You can also use the drain plug on the bottom of the can.
Mishimoto Automotive oh ok cool just installed mine last week and wanted to be sure. Thanks for the quick reply, loving my stealth black intercooler on the ST!