1970 Mustang Mach 1 Car Restoration project: Interior Removal

Removing the interior of my mustang.
My Instagram
calebsclassiccars
Revelation 3:20
Behold, I stand at the door, and
knock if any man hear my voice,
and open the door, I will come in to
him, and will sup with him, and he
with me.

[@nickbonvino]

Thanks for posting! Fold down seat option is cool!

[@bentnickel7487]

I'm 74 y/o. I have worked with old cars my entire life, when I see a Mustang like yours I wonder if most people understand that only 10% of these rebuilds get completely finished. Folks have good intentions, but life gets in the way. All the parts that get taken off, even the screws, should get bagged and labeled, so that when you DON'T complete the job, you have all the trim and parts boxed to sell to the next guy. Like all the chrome trim for the lay down back seat. That option was expensive back in the day. Today multiply that by 10. I learned the hard way. Even when you can't complete the whole restoration, you have ALL the parts. They're not scattered all over the garage and every washer, bolt and nut is accounted for. Good luck. I'm following your every step. 😀😁😁

[@charlesschneiter5159]

That's very wise and sound advice!
Been there done that ;-)

[@CalebsClassicCars]

Thanks I'll try and keep all the parts

[@ESPSJ]

Loving the series so far! lots of rust, but worth fixing.

[@CalebsClassicCars]

Thanks

[@jwrockets]

Nice options. Fold down rear seat, dash clock. I'm glad the other hood lock pin was in the car. I also spotted a dime. Keep it up.

[@gosuwall]

hello my friend, i come from France and i have mustang 70 coupe with 351W. Your video help me so much with some stuff. Thanks mate. Ready for your next video !

[@CalebsClassicCars]

Happy to help

[@charlesschneiter5159]

Thanks for this latest video, Caleb - much appreciated!
That's one huge project but go one step after the other nice and slow does it - mileage may vary 😊

[@CalebsClassicCars]

Ha ha yes it is going slow

[@washerbtw]

3.55 ,finds 1 million dollars under back seat !! Woohoo

[@CalebsClassicCars]

I wish

[@jimmillet1442]

Your going to wish you marked those headliner rods. There's different holes that allow for tight adjustment on the headliner and you want to know which holes were used forthe rods for when you put a new headliner in.

[@harleythompson2452]

I think these cars are a nightmare to work on

[@killerbee1740]

Hey I was wondering how you are able to remove the lower dash? I own a 1970 mustang with AC and c4 trans. I got the passenger side loose but there's something holding in the portion on top of the cigarette lighter and wiper speed dial. I've removed all visible bolts.