awesome/great information and really the way u approaching this is very easy to understand and learn thanks for ur time of showing how should be done. cheeeeers
Hi, Is the autel IM608 able to clone the mercedes continental ECU SIM271DE2.0? And is it necessary to virgin the donor ECU before doing the ECU cloning procedure?
what numbers on the ecu did you end up matching? I just attempted to clone a 17.7.2 and it bricked 2 donors that matched the bosch number and mercedes part number.
@@DTEAuto MED17.7.5 _ PN/A 177 900 66 03 _HW 177901 99 00. I did it with IM608 but before that i backed up with KESS3. It was my first time using the GBox3 so i took some precautionary steps. Try and see if you can get the data off with KESS3, Magicsport, or Dimsport.
@@TheMasterFerrari yes I did everything exact, used power supply stay above 12V used gbox3 , I would be able to read the data from all modules no problem, original and donors, once it came to write, it gave me a fail message. I then attempted to read them again and both donors were now dead not letting me read them. I matched the major numbers that always normally do on Benz, but whatever it wasn't happy with it bricked them. You can tell in the video he wrote back straight into the same ecu, he just had it flipped so you couldn't see the numbers, obviously it was a perfect match with all numbers that it needed to match and why his worked.
awesome/great information and really the way u approaching this is very easy to understand and learn thanks for ur time of showing how should be done. cheeeeers
great job thanks so much for sharing
High appreciation for your videos. I have a 2012 MB w221 S63 AMG that I need to swap its DME do you think that can be possible using my IM608?
Good job brother thanks for video
Can you tell me how I can get in contact with your company I need some programming
How can I solve it if I don't have the old ECU, what would be the process if I only have the donor ECU?
Sir how to Check Injecter pulses on Mercedes
Hi, Is the autel IM608 able to clone the mercedes continental ECU SIM271DE2.0? And is it necessary to virgin the donor ECU before doing the ECU cloning procedure?
Hi, where is your shop located?
Hello
Do you think you can do the same type of video but for a 2021 mercedes sprinter 2500 v6
I tried it on MED17.7.5 and it worked perfectly. Great video.
what numbers on the ecu did you end up matching? I just attempted to clone a 17.7.2 and it bricked 2 donors that matched the bosch number and mercedes part number.
@@DTEAuto MED17.7.5 _ PN/A 177 900 66 03 _HW 177901 99 00. I did it with IM608 but before that i backed up with KESS3. It was my first time using the GBox3 so i took some precautionary steps. Try and see if you can get the data off with KESS3, Magicsport, or Dimsport.
@@DTEAutooh boy I got one of these to do tomorrow, I might hold up after seeing this.
@@TheMasterFerrari yes I did everything exact, used power supply stay above 12V used gbox3 , I would be able to read the data from all modules no problem, original and donors, once it came to write, it gave me a fail message. I then attempted to read them again and both donors were now dead not letting me read them. I matched the major numbers that always normally do on Benz, but whatever it wasn't happy with it bricked them. You can tell in the video he wrote back straight into the same ecu, he just had it flipped so you couldn't see the numbers, obviously it was a perfect match with all numbers that it needed to match and why his worked.
@@DTEAutoCan confirm it just bricked my donor MED17.2.2 ECU as well.
Great information boss good job tell me something can im508 do the same job with the gbox 3 or not and this ecu is for fbs4 or3
It is FBS4 and yes im508 should be able to do it with active subscription.
hey
i got 17.7.2 and its not reading at all the eeprom
it reads the ecu information but not the eeprom
any suggestions?
by autel 608pro 2
Well done thanks for sharing
Can you clone a used ECU with a IM508S like is it with the im608s2 any answers?
Is it possible to use G-Box 2 ?? 👍
Does it work fir Mercedes W163? Thanks
Great job
Thank you brather
What scanner is this
Hello, can you tell me please what is T1 and T3? Thank you,!
Need for communication without opening ecu,like boot pins called gpt1 and 2
I try mine im608 not able to read at all
model of the mouse plese
Upload more videos about ecu cloning with autel
coming soon
Today I am buy autel im 608pro
@@huyug1hello can you tell me how I can get in contact with you about getting some programming work done?????
This is not fsb4
You can clone ecu fsb4
Can you clone fsb4 keys?