Hi, I'm Steve, nonda's lead mechanic engineer. Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
Hello my car 525i 2009 engine code n52b25a. My problem I have fault codes p2096, p2196. I have just done a complete maintenance brief. And the morning when I start cold my rpm not stable and when I open the oil cap a noise
Hello I have a 2006 ford Taurus. My check engine light came on a week ago and hasn’t gone away, I received 3 codes from a diagnostic which were (P0 191, P2 196, P2 198) i haven’t been driving it much, but I want to ask if the car is worth fixing, and will it be costly? I don’t want to scammed for lack of knowledge on this matter.
Awesome video! My 2017 Ford Fusion has been throwing a P0456 (very small evap leak) for about a month now. Any time I fill up gas the CEL throws the same code. Kinda stutters on start up but not bad at all. I’ve been meaning to get around to changing my evap purge valve but haven’t done so yet. This morning after driving my car for 20 mins, CEL came on. Followed by a periodic humming sound (hums about every 10 seconds). Now I’m getting two codes P0456 and P2196 (O2 sensor biased/stuck rich bank 1 sensor 1) Would a bad evap purge valve cause it to run rich? Or could it be I have a small evap leak coming from fuel injector in bank 1?
Hi. Good video. I have a P2196 code on my Toyota Yaris 2009 stuck rich bank one sensor one but the code only comes on during the winter season. Rest of the year its fine no code whatsoever. Do you know what the problem may be as its only tripping on during that time?
@@K_N_44 nope. Well in summer last year I sprayed the sensor with Halfords electrical cleaner (took the sensor out using the special sensor tool you can get from ebay) I cleared code and didnt come on till now last few weeks. I drive let car warm up with heating on and boom light comes on but I just keep clearing it using obd.
@@IbzJaay19 well i have this problem a few years now so it started to come up in warmer days of the spring but i couldn't remove it yet. Why you don't change it?If error code is true then we probably burning more fuel which in long run is the same as paying for the replacement part
@@K_N_44 I only drive local so my yaris doesnt reach optimum temperature most of the time so thats why I just clear code whenever it comes on. The replacement part is a over £100 and only the genuine Denso brand will work. All other brands will illuminate the check engine light on like how it is now. I read that somewhere online. So if you are going to get a new part make sure its genuine Denso.
Got p2196 code Car runs and drives besides sometimes rough starts after refueling. I reset the check engine light didn't come back on for another month. Check for vacuum leaks and didn't find any. Cleaned MAF sensor and reset again. Came back on a week later.
@@ajonthebeatENTschannel-hi4dc Still the same issue. Code p2196 comes on after like 2 weeks or so of driving after i clean the mass air flow sensor and clear code. The car is still hard to start sometimes after refueling. Im hearing that can be the purge valve. Thats my next step i guess. Do you have any recommendations?
Hello. I have a 2017 Ford Edge. I have 3 codes. P0456, P1450 and P2196. I’ll tell you a few of the problems I’m having. My gas is running out extremely fast. This is a V4 and it is running out like it is a V12. When Im at the gas station, if I fill up my gas tank, when I go to start my car it does not start immediately. It coughs and coughs like it’s trying to start but doesn’t for about a minute or 2. And also, when I add gas my car shakes and rumbles. More recently I actually smelled gas in my car after I left the gas station. That happened twice. Where do you think I should start?
I recently got the P2196 code on my 2016 Ford Edge Sport and my car has shaken the last 2 times I’ve gotten gas, and my revs go up and down and then it settles and stops shaking, but when I tried ti start it up today at the gas station it sounded like it did not want to start up, scheduled appointment at Ford for this Friday but prior help would be amazing
Hello, as you are receiving more than one error code, we highly suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
Today I used a can of seafoam spray top engine cleaner and lube. I sprayed it directly into the throttle body. Now... My 2004 Ford Ranger with a 3.0 l 6 cylinder engine is throwing code P2196 and P2198. Any ideas?
Hi Saul, yes. It is best to get your vehicle visually inspected/checked by your local mechanic for further diagnosis as you are receiving more than one code.
Hi Rahul, yes it could trigger this code. But to certainly know the cause and remedy, you may seek a professional technician to inspect your vehicle first. Thank you.
Hi William, I would suggest you check out the owner's manual first. You may also try to find any stamps on the cylinder head for any cylinder numbers. Bank 1 is the side with the number 1 cylinder (Cylinders 1-3-5-7- etc.)
Hi, I have a 2016 mustang v6. (Tested at autozone for p2196) Which is having trouble starting after a refuel and even shut off at a light while idling. Which method is best for my issue. I have an appt tmrw for possible service but would still like your advice. I would like to know if I would be able to fix my issue myself. Thank you
Hi Brandon, kindly check the wiring related (around the pre and post catalytic converter oxygen sensor) for damage and repair/replace them to see if the issue will still persist Clean the MAF Sensor, check for any exhaust leaks, and ensure that the fuel pressure is within specs.
I pretty much done everything recommended in this video and I'm still getting this p2196 code. Yes I replaced the purge valve. Any ideas what what else it could be. The engine runs fine it seems like it runs even better since I put all those parts in.
I heard you have to clear the codes with a obd reader and if it comes back on you are in trouble. If you did all this then i'm sure it wont turn back on.
Have you tried to change spark plugs? It says this code is related to rich mixture of gas and air, this can happen because of malfunction of spark plugs too.
Hi James, we suggest to follow the tips/recommendation provided in our uploaded video (How to fix P2196). If applied and the issue continue to persist, please let us know or you may let your vehicle visually inspected by your local mechanic for further diagnosis.
check oxygen sensor harness probpably short causing high voltage and causing dtc p2196 before you replace the sensor go under vehicle visual inspect oxygen sensor harness see if theres any wire rubbing on the drive shaft or touching exhaust .its easy if you have a scan data then you custom list all 4 oxygen sensors and you look at the voltage and you start wiggling the harness you'll feel surprise seing sudden voltage change on the sensor that means theres a short somewhere
Hello, yes-exhaust leak is one of the factors that could cause this error code to appear. Please follow the tips/suggestions provided in our uploaded video (How to fix P2196) whenever you encounter this code.
Hi, I'm Steve, nonda's lead mechanic engineer.
Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
Hello my car 525i 2009 engine code n52b25a.
My problem I have fault codes p2096, p2196. I have just done a complete maintenance brief.
And the morning when I start cold my rpm not stable and when I open the oil cap a noise
Great video. Very helpful and concise.
What are the readings to look for that will isolate the problems listed in the video?
I have same code on my kia k5 hybrid 2021 and all expert couldn't solve the problem
Why do you have a robot voice?
Steve you’re hilarious, this video is an absolute joke🤣🤣😭
Hello I have a 2006 ford Taurus. My check engine light came on a week ago and hasn’t gone away, I received 3 codes from a diagnostic which were (P0 191, P2 196, P2 198) i haven’t been driving it much, but I want to ask if the car is worth fixing, and will it be costly? I don’t want to scammed for lack of knowledge on this matter.
Awesome video! My 2017 Ford Fusion has been throwing a P0456 (very small evap leak) for about a month now. Any time I fill up gas the CEL throws the same code. Kinda stutters on start up but not bad at all. I’ve been meaning to get around to changing my evap purge valve but haven’t done so yet. This morning after driving my car for 20 mins, CEL came on. Followed by a periodic humming sound (hums about every 10 seconds). Now I’m getting two codes P0456 and P2196 (O2 sensor biased/stuck rich bank 1 sensor 1) Would a bad evap purge valve cause it to run rich? Or could it be I have a small evap leak coming from fuel injector in bank 1?
Hello, you may possibly have a bad canister purge valve that's causing a vacuum leak.
Awsome video? Seriously? Wow
Hi. Good video. I have a P2196 code on my Toyota Yaris 2009 stuck rich bank one sensor one but the code only comes on during the winter season. Rest of the year its fine no code whatsoever. Do you know what the problem may be as its only tripping on during that time?
Hi EJ, this code is usually triggered by a bad oxygen sensor, and it happens in case of cold engines during winter.
Exactly the same ...
Code is only on when it's cold
Did you manage to fix it?
@@K_N_44 nope. Well in summer last year I sprayed the sensor with Halfords electrical cleaner (took the sensor out using the special sensor tool you can get from ebay) I cleared code and didnt come on till now last few weeks. I drive let car warm up with heating on and boom light comes on but I just keep clearing it using obd.
@@IbzJaay19 well i have this problem a few years now so it started to come up in warmer days of the spring but i couldn't remove it yet.
Why you don't change it?If error code is true then we probably burning more fuel which in long run is the same as paying for the replacement part
@@K_N_44 I only drive local so my yaris doesnt reach optimum temperature most of the time so thats why I just clear code whenever it comes on. The replacement part is a over £100 and only the genuine Denso brand will work. All other brands will illuminate the check engine light on like how it is now. I read that somewhere online. So if you are going to get a new part make sure its genuine Denso.
I have P2196 and P0139 on a 2014 Hyundai accent, but I recently had my O2 sensors changed, any ideas?
I have a hyundai elantra 2006 changed my downstream sensor and i still have p2196, p2626 & p2097
Got p2196 code
Car runs and drives besides sometimes rough starts after refueling. I reset the check engine light didn't come back on for another month. Check for vacuum leaks and didn't find any. Cleaned MAF sensor and reset again. Came back on a week later.
Please confirm if this is the only code you're getting and let us know your vehicle's year, make and model.
@@nondainc I have a 2016 ford fusion
And yes this is the only code im getting. And thanks for responding
What came of this?
@@ajonthebeatENTschannel-hi4dc Still the same issue. Code p2196 comes on after like 2 weeks or so of driving after i clean the mass air flow sensor and clear code. The car is still hard to start sometimes after refueling. Im hearing that can be the purge valve. Thats my next step i guess. Do you have any recommendations?
@@TheProspecialist purge valve is leaking, replace it and youll be good
Hello. I have a 2017 Ford Edge. I have 3 codes. P0456, P1450 and P2196. I’ll tell you a few of the problems I’m having. My gas is running out extremely fast. This is a V4 and it is running out like it is a V12. When Im at the gas station, if I fill up my gas tank, when I go to start my car it does not start immediately. It coughs and coughs like it’s trying to start but doesn’t for about a minute or 2. And also, when I add gas my car shakes and rumbles. More recently I actually smelled gas in my car after I left the gas station. That happened twice. Where do you think I should start?
Hello, since you are receiving multiple error codes, we suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
I am having the exact same thing, have you found a solution ?
Canister purge valve ! Had the same issue and it fixed it.
I recently got the P2196 code on my 2016 Ford Edge Sport and my car has shaken the last 2 times I’ve gotten gas, and my revs go up and down and then it settles and stops shaking, but when I tried ti start it up today at the gas station it sounded like it did not want to start up, scheduled appointment at Ford for this Friday but prior help would be amazing
@@TeensNTechs replace canister purge valve!
Hi. I have a 2012 hyundai elantra. I am getting codes p2096 and p2196. I pray its not the catalytic converter. Any ideas. Thx
Hello, as you are receiving more than one error code, we highly suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
Today I used a can of seafoam spray top engine cleaner and lube.
I sprayed it directly into the throttle body. Now...
My 2004 Ford Ranger with a 3.0 l 6 cylinder engine is throwing code P2196 and P2198. Any ideas?
Hello, the issue could be coming from the hoses, MAF, wiring/plugs or the 02 sensors. Kindly have them checked.
2015 X1 28i, would the codes p2196,p2096 cause the engine to start trembling and shutdown? How I fix the issue, please?
Hi Saul, yes. It is best to get your vehicle visually inspected/checked by your local mechanic for further diagnosis as you are receiving more than one code.
hi steve, I get the p2196 on a 2011 3l v6 escape with bank1 sensor1. Can it be because of a failed purge solenoid?
Hi Rahul, yes it could trigger this code. But to certainly know the cause and remedy, you may seek a professional technician to inspect your vehicle first. Thank you.
@@nondainc thank you
Can a small hole in the resonator cause this to happen?
I was getting lean and o2 sensor would not go below 0.9?? Changed it out now getting This rich code and car won't run 😤
Hello, please provide us with your vehicle's year, make and model in order for us to address your concern accurately.
Hello Nonda, I have a p 2196 code bank 1 sensor 1 is that on the passenger side of the vehicle? I have 2015 F150 2.7L about 112,000 miles
Hi William, I would suggest you check out the owner's manual first. You may also try to find any stamps on the cylinder head for any cylinder numbers. Bank 1 is the side with the number 1 cylinder (Cylinders 1-3-5-7- etc.)
@@nondainc thanks for the reply.
Or just replace the purge valve 🤷♂️
Hi Goran, thanks for sharing your opinion!
Thank you so much !!
You're welcome! Feel free to let us know if you have any questions!
Hi, I have a 2016 mustang v6. (Tested at autozone for p2196) Which is having trouble starting after a refuel and even shut off at a light while idling. Which method is best for my issue. I have an appt tmrw for possible service but would still like your advice. I would like to know if I would be able to fix my issue myself. Thank you
Hi Brandon, kindly check the wiring related (around the pre and post catalytic converter oxygen sensor) for damage and repair/replace them to see if the issue will still persist Clean the MAF Sensor, check for any exhaust leaks, and ensure that the fuel pressure is within specs.
Hey did you ever get it fixed? I have the exact same problem!
Umm, there is absolutely no way it is possible to check what this ridiculous video says in 5 min.
Why lie? I don’t get it
I pretty much done everything recommended in this video and I'm still getting this p2196 code. Yes I replaced the purge valve. Any ideas what what else it could be. The engine runs fine it seems like it runs even better since I put all those parts in.
I heard you have to clear the codes with a obd reader and if it comes back on you are in trouble. If you did all this then i'm sure it wont turn back on.
@@xDarkAngelxc Thanks. Yeah I cleared the codes multiple times with my scan tool it still keeps on coming back.
@@josron6088any update?, hope you fixed it and it’s done!.
@@Welly187 It's still doing the same thing. Haven't figured it out yet, what's causing it.
Have you tried to change spark plugs? It says this code is related to rich mixture of gas and air, this can happen because of malfunction of spark plugs too.
excelent video
Thank you for your feedback, Carlos!
I have a 03 ford explorer and i get this code 2196.
Hi James, we suggest to follow the tips/recommendation provided in our uploaded video (How to fix P2196). If applied and the issue continue to persist, please let us know or you may let your vehicle visually inspected by your local mechanic for further diagnosis.
check oxygen sensor harness probpably short causing high voltage and causing dtc p2196 before you replace the sensor go under vehicle visual inspect oxygen sensor harness see if theres any wire rubbing on the drive shaft or touching exhaust .its easy if you have a scan data then you custom list all 4 oxygen sensors and you look at the voltage and you start wiggling the harness you'll feel surprise seing sudden voltage change on the sensor that means theres a short somewhere
Literally none of these repairs can be done in 5 minutes.
Fuel rail costs $600+ in labor to remove on most engines 2015+ lol
Let alone the hours it’d take if you did it yourself hahaha
C7 RS6 😬 🤦♂️
Hi Anthony, the O2 sensor may need a replacement.
Probably a exhaust leak
Hello, yes-exhaust leak is one of the factors that could cause this error code to appear. Please follow the tips/suggestions provided in our uploaded video (How to fix P2196) whenever you encounter this code.