Hey there I have the whole kit on my RX and I agree that some of the parts don’t align well or at all….In my opinion though, the front fender and the headlight cover go hand in hand since they’re a perfect match unlike the stock headlight cover where you have that awkward gap in between them…..And if you’re up for it, another cool, cheap aesthetic mod would be to replace the tire liners to red. Super 73 has them now in stock the last time I checked. Over all GREAT JOB on the bike. Enjoy it and ride safe!
Thanks! Guess it isn't just me haha. I've heard a few others had alignment issues too. Bummer for such a pricey set. I am considering getting the headlight cover now that I've been riding around with it like this for a bit. Thanks for all the info. Enjoy the ride!
@@redhalftone You’re welcome….Yes the Flow Carbon is pricey but overall the quality is really good! At the end of the day, we DIYers find a way somehow to make it fit. Again great job on the bike and trust me when I say you NEED that headlight cover. It would make your bike look even more badass! The headlight cover and front fender go hand in hand like peanut butter and jelly or burger and fries. Lol
I had the same issue on my L/H panel and has to oversize the mounting hole to get it to fit but this led to the top edge springing away from the frame . Not what I expected after dropping over 800 dollars. The front fork guards were a bad fit to and I needed to spend ages sanding areas to get them to sit straight. I’ve sold my kit now and am producing my own ABS side panels which include decals and a matching front panel decal. 🤙
I hear ya. Someone on Reddit mentioned that the mounting holes on the bike frame are not consistent and a lot of people were having problems with other items they were trying to add. That also could have contributed to the issue. At this point, I'm thinking both S73 and Flow Carbon are inconsistent with their products. I'm surprised to hear the fork guards were a bad fit -- what a bummer. I'd love to see the ABS side panels you're making.
Little tip: You can get a little round jeweler's file, and expand/oblong that hole on the side plate just enough to get your screw to not to bind up. I suspect that it would need just a tiny bit to help fitment, and you'd not notice it once the screw was in place. You might even consider doing it just so it reduces the stress on the carbon and minimizes any chance of stress cracks occurring. I suspect it just needs the tinniest amount shaved off to make it perfect. All that said, contact the maker of the carbon, and let them know before you do anything, is my advice. They might just send you a new one as a matter of good business, and they might like to know if their production jigs are a little off.
Did you get the front plate for the light yet? Before you do that, consider buying a headlight from Kanebilt ( I have it on my RX). They look way better than stock, but more importantly, they are way brighter and much safer than the original, especially for the streets of NYC. Aloha from Hawaii
I haven't yet, but still might get it. I've heard good things about the Kanebilt headlight, but I'm a bit more into the moto look rather than the cafe racer look. I wish they made a smaller one that would fit with the front plate. There might be something else out there that I haven't found yet. Ya'll are doing some pretty dope mods in Hawaii!
I didn't buy it because I was hoping to save some cash and didn't think I needed it. After having everything for a while, I'm considering buying it. I'm still a fan of the kit. I think it makes the bike look great and the larger fenders actually help reduce the spray that comes off the wheels when the road is wet. The front fender rattled a little bit and I think having the front plate would fix that because I see there are holes on the front fender where the two would connect. I fixed the rattle by adding some foam between the fender and the frame for now. That's also the other reason why I'm now considering the front plate.
That was very interesting, and good video thank you for sharing, I personally think it is too expensive so I did it myself for less money my like and looking forward to your future videos 👍😜⚡✌oh yeah, your instagram link doesn't work, i wanted to see but i can't
Thank you! I watched your videos where you wrapped yours -- it came out really good! I really liked the shape of these fenders and I wish they sold them in a more affordable material. Thanks for the heads-up about the IG link -- should be working now!
Yes, these are significantly better than the stock ones. Both the front and back fenders are much longer which helps with tire spray. There is still some spray that comes up in the front but it seems to only get as far as the light. So far so good with the back one. I didn't find any spray on my backpack last time I rode in the rain.
Love the mods. Keep it up 👍🏾
Thanks!
Wow that's what I was looking for ..amazing 🤩.. the bike and the bike owner looks beautiful
Thanks!
Hey there I have the whole kit on my RX and I agree that some of the parts don’t align well or at all….In my opinion though, the front fender and the headlight cover go hand in hand since they’re a perfect match unlike the stock headlight cover where you have that awkward gap in between them…..And if you’re up for it, another cool, cheap aesthetic mod would be to replace the tire liners to red. Super 73 has them now in stock the last time I checked. Over all GREAT JOB on the bike. Enjoy it and ride safe!
Thanks! Guess it isn't just me haha. I've heard a few others had alignment issues too. Bummer for such a pricey set. I am considering getting the headlight cover now that I've been riding around with it like this for a bit. Thanks for all the info. Enjoy the ride!
@@redhalftone You’re welcome….Yes the Flow Carbon is pricey but overall the quality is really good! At the end of the day, we DIYers find a way somehow to make it fit. Again great job on the bike and trust me when I say you NEED that headlight cover. It would make your bike look even more badass! The headlight cover and front fender go hand in hand like peanut butter and jelly or burger and fries. Lol
Looks cool. I just need a back fender for the mud.
I had the same issue on my L/H panel and has to oversize the mounting hole to get it to fit but this led to the top edge springing away from the frame . Not what I expected after dropping over 800 dollars. The front fork guards were a bad fit to and I needed to spend ages sanding areas to get them to sit straight. I’ve sold my kit now and am producing my own ABS side panels which include decals and a matching front panel decal. 🤙
I hear ya. Someone on Reddit mentioned that the mounting holes on the bike frame are not consistent and a lot of people were having problems with other items they were trying to add. That also could have contributed to the issue. At this point, I'm thinking both S73 and Flow Carbon are inconsistent with their products. I'm surprised to hear the fork guards were a bad fit -- what a bummer. I'd love to see the ABS side panels you're making.
Little tip: You can get a little round jeweler's file, and expand/oblong that hole on the side plate just enough to get your screw to not to bind up. I suspect that it would need just a tiny bit to help fitment, and you'd not notice it once the screw was in place. You might even consider doing it just so it reduces the stress on the carbon and minimizes any chance of stress cracks occurring. I suspect it just needs the tinniest amount shaved off to make it perfect. All that said, contact the maker of the carbon, and let them know before you do anything, is my advice. They might just send you a new one as a matter of good business, and they might like to know if their production jigs are a little off.
All great points, thank you!
Did that to my panels and they then ended up pulling away from the top tube unless you didn’t tighten the bolts . I’ve sold my kit now
That bike is a Lil Beast
Did you get the front plate for the light yet? Before you do that, consider buying a headlight from Kanebilt ( I have it on my RX). They look way better than stock, but more importantly, they are way brighter and much safer than the original, especially for the streets of NYC. Aloha from Hawaii
I haven't yet, but still might get it. I've heard good things about the Kanebilt headlight, but I'm a bit more into the moto look rather than the cafe racer look. I wish they made a smaller one that would fit with the front plate. There might be something else out there that I haven't found yet. Ya'll are doing some pretty dope mods in Hawaii!
Cool and all. But let's see some rides man!
Thanks 👍 maybe I'll show my commute from Brooklyn to the westside.
I would like to see a 2nd battery mod. I liked the video!
Thanks! I'm considering a 2nd battery the newer 32mph speed update really saps the battery quick.
Very good! It’s a pity I couldn’t get to see a full shot of the finish built
Ahh good point. I'm making another video about the low rise enduro handlebars next. I'll get a full bike shot in that one.
Damn that looks cool
Thank you!
Hi, Lisa.
Any reason why you didnt buy Front Plate ?
Do you still like your carbon kits ?
I didn't buy it because I was hoping to save some cash and didn't think I needed it. After having everything for a while, I'm considering buying it. I'm still a fan of the kit. I think it makes the bike look great and the larger fenders actually help reduce the spray that comes off the wheels when the road is wet. The front fender rattled a little bit and I think having the front plate would fix that because I see there are holes on the front fender where the two would connect. I fixed the rattle by adding some foam between the fender and the frame for now. That's also the other reason why I'm now considering the front plate.
That was very interesting, and good video thank you for sharing, I personally think it is too expensive so I did it myself for less money my like and looking forward to your future videos 👍😜⚡✌oh yeah, your instagram link doesn't work, i wanted to see but i can't
Thank you! I watched your videos where you wrapped yours -- it came out really good! I really liked the shape of these fenders and I wish they sold them in a more affordable material. Thanks for the heads-up about the IG link -- should be working now!
@@redhalftone thank you,
done with pleasure Lisa💨💨👍👌
👍🏾
Does the front fender stop your face getting splashed?
It doesn't completely stop it in heavier rain, but waaaay better than the stock fenders.
Do they actually work and keep you dry during rain and better compared to stock?
Yes, these are significantly better than the stock ones. Both the front and back fenders are much longer which helps with tire spray. There is still some spray that comes up in the front but it seems to only get as far as the light. So far so good with the back one. I didn't find any spray on my backpack last time I rode in the rain.
How much do you want for your old tire hugger fender?
I don't have it anymore, sorry.
does it ruin your super73 warrenty
No, these are parts Super73 also sells separately and are meant to be swapable.
Can I buy your original fender set off you?
I don’t have them anymore