Configure WDS on second router and disable DHCP and the second router will work as a repeater. Doing so, there will be no need to connect both the routers via LAN Cable.
Honey, can I ask a question about programming settings for secondary routers? Isn't it necessary to disable the secondary dhcp router so that it can get ip from the main router or it will shut down the two networks and have been practically implemented
Yes if you put ip router1 192.168.10.1 and ip router2 192.168.10.2 but you should connect to port lan in the router 2 not port modem Here in this video he can connect 254+254 devices
@@alfassi1988 The key is to understand IP as he said it is correct in the video because the are on each subnet x.x10 and x.x20 in Eng mohamed Al-Ahmad's example they are on the same subnet and therefore they have only one dhcp server in the video there will be two one for each lan with each 254 ip numbers to choose from. Answer must be no since it is two different setup's of the network.
dear u r connecting router and laptop with lan only than during or before configuration your internet connection is showing hw it is possible?....btw so does internet connection should ON during configurarion??
I want a way to connect 2 modems in two different networks that are far apart so that I can control devices from one of the branches..there are programs for that, but I want to connect without using programs, but through modems connected to the Internet
So do you have to turn router one off during setting up router two? Or keep router one running while setting up router two? Or do I have to start over on the router one and go from there, or I don't have to? I just need to make sure I don't mess it up. So please be honest with me!! Thank you so much!!
You have configured two router by 192.168.10.XX and 192.168.20.XX. now i need the both way routing from one router to another router, ping from 192.168.20.xx to 192.168.10.xx and vice versa. how to do this routing from this two series. Would you please say me how to make this?
. a trai cho em hỏi là muốn chơi võ lâm truyền mà game nó cho chơi 1 đường truyền mạng IP là 8 acc zị có cách nào cho đc chơi thêm acc nữa ko tại dư 2 máy tính mà ko vô thêm đc game nữa buồn
Do u have to sign in all your devices phone any wireless cams etc into the 2nd modem even though password same , ive tried this and i get the impression you do , can u tell or clear that situation up please !!
If you do it like this you wil have two range ip's at home.. So you wil neve finder another device in a network if one is connect to router 2 an first device with router 1...don't do it like this..
Bang mau nanya,,saya kan nembak WiFi Indihome pakai tp link tanpa kabel LAN/pakai hotspot dari Indihome,,terus saya mau memperluas lagi jaringan yg di router tp link itu dengan memakai kabel LAN,,itu gimana ya..jadi inti nya..Indihome ke tp link 1 memakai hotspot/tanpa kabel terus dari tp link 1 ke tp link 2 memakai kabel LAN,itu bisa ga,dan bagai mana cara pengaturan nya..mohon di jawab
So double NAT on 2nd router and your devices are not on same broadcast subnet so won't see each other....yuk. Leave original router as 192.168.0.1. Turn 2nd router into simple switch/access point by setting its IP address to 192.168.0.2 , disable DHCP server on it and don't use the blue WAN port on 2nd router.
Exactly... you are right. I do this all the time and am wondering why he didn't talk about disabling DHCP on the second router to avoid IP conflict. Nice video but at the beginning but messed up at the end.
i have this xiaomi router..you just sign in your mi account and set ssid and pass..plug and play..i was wondering why the dhcp was enabled but it was working just fine..
@@leonuneza2012 His setup is trash, because he's got two dhcps in two completely different ranges, you for example wouldn't be able to reach a NAS connected to router1 when you're on router2. It's much better to do as MrScracha says, I got it set like that with 3 routers (technically only APs) at home.
What is the purpose of connect 2 wireless router together than still using ethernet cable connect 2 router together? Would it be easier by connecting an ethernet switch at the remote location with a ethernet cable from router or just use a wifi extender has ports.
you don't need to wire for connecting between 2 wifi router directly. its possible to connect 2 wifi router without LAN and WAN Connect from wire, that's called repeater.
Bang minta saran kalok logged out lost dhcp lease di sebagian jalur ,yang jalur lain aman kira-kira penyebabnya apa ya.?? Apakah dari router atau setingan mikrotiknya.trimakasih
And this video setup looses upnp features on router 2. If wiil connect via cable both routers, best configure router 2 on same network range and plug cable at lan port of router 2.
Please help me If my main router is orbi ip adress 192.168.10.1. how i can program three more routers to share my line in lan to lan I am using tp link router ip adress 192.168.0.1 If i changed my main router 192.168.1.1 I can use 192.168.1.220 Like this But here my mainrouter is 192.168.10.1 Which ip number i can use in lan to lan connection Please help me
That's why you need to set two different IP addresses. He used 192.168.20.1 for the second router - so anywhere in your home network if you type your second router's IP address - you can login as admin to that piece of equipment. Hope this helps.
How to configuration 2.3 router on home router I want both router both side access setup page Example main router from access second router setup page and second router from access main router setup page if possible let's me know Because we connect two routers main router lan and second router wan port connect cable.we only access second router from main router setup page we don't access main router from second page
Tenda 03 configuration already outdoor to first working in Wifi router (not a modem), second both wifi router by using Ethernet connecting share web browsing how to pc. how advice to me soon open tutorial video channel.
@@juniorgabriel4113 First of all this video does not give full details you need to properly setup such network but to answer your question yes you can with a cable and not wireless because of distance.
This is way too much work, I used a more creative solution. I have my main router (FBI surveillance Van 42) connected to two secondary routers (FBI surveillance Van 171 and FBI supervisor 9) using power line adapters. I set the network names and passwords from my main computer before moving to 171 to the master bedroom and supervisor 9 in my wife's upstairs office. Easy peasy. I used three PLAs and two 6 foot cat 5 cables. Done.
Show ALL Wi-Fi password with only 1 CMD ruclips.net/video/RC1GNOu_4YU/видео.html
engo que dejarle activo los dchp a los dos router? y como modo router? tengo dos del modelo c6o y me dan conflicto de ip
This is the best description I've seen for this task.
Configure WDS on second router and disable DHCP and the second router will work as a repeater. Doing so, there will be no need to connect both the routers via LAN Cable.
@Ho Ho Ho Is a router used to expand wifi field. The repeater repeat packets, both coming from main router as coming from clients.
WDS if they can "see each other" depending on the distance between them. Anyway, if you want to get full speed, always connect them via LAN cable.
For home Wi-Fi network router you are the best man 👞
How about connecting wirelessly between 2 routers? Do you have a video? Pls help. thanks in advance
with such a counter productive video,subscriber base may go South..!!!
Best explanation ❤
Honey, can I ask a question about programming settings for secondary routers?
Isn't it necessary to disable the secondary dhcp router so that it can get ip from the main router or it will shut down the two networks and have been practically implemented
السلام عليكم أخي أريد أن أربط جهازي راوتر مع بعضهما عن طريق كايبل rj45 والمسافة بينهما تتجاوز 50 متر! هل يمكن ان تريني الطريقة الصحيحة لفعل ذلك
Yes if you put ip router1 192.168.10.1 and ip router2 192.168.10.2 but you should connect to port lan in the router 2 not port modem
Here in this video he can connect 254+254 devices
so what is the answer?
@@alfassi1988 The key is to understand IP as he said it is correct in the video because the are on each subnet x.x10 and x.x20 in Eng mohamed Al-Ahmad's example they are on the same subnet and therefore they have only one dhcp server in the video there will be two one for each lan with each 254 ip numbers to choose from. Answer must be no since it is two different setup's of the network.
Thanks because of you i did at my home.
disculpe hasta cuantos routers se pueden conectar al router principal?? gracias
tengo que dejarle activo los dchp a los dos router? y como modo router? tengo dos del modelo c6o y me dan conflicto de ip
视频内容非常有趣！有些事我不明白：我的okx钱包里面有usdt，我有恢复短语。「pride」-「pole」-「obtain」-「together」-「second」-「when」-「future」-「mask」-「review」-「nature」-「potato」-「bulb」: 我应该如何把它们变成比特币？
Amigo hago esa configuración y los router me quedan que dan internet y se les va, luego viene y se les va y así sucesivamente
Que podrá ser ??
me pasa lo mismo a uno de los dos se les va el internet nose aun como resolverlo
dear u r connecting router and laptop with lan only than during or before configuration your internet connection is showing hw it is possible?....btw so does internet connection should ON during configurarion??
What speed you get compared to your main router. Do you get any signal drops?
Apakah bisa menghubungkan mengkombinasikan Reuter TP link internet dgn STT box digital tv ??? trims ...
Is it possible to receive wifi and send it via ethernet with the secondary router? I got some devices that depends on cable
Yes its possible
Thanks a lot it worked perfectly well
I want a way to connect 2 modems in two different networks that are far apart so that I can control devices from one of the branches..there are programs for that, but I want to connect without using programs, but through modems connected to the Internet
Too bad
hey....man ...what is deference , how many data speed in this settings...?
So do you have to turn router one off during setting up router two? Or keep router one running while setting up router two? Or do I have to start over on the router one and go from there, or I don't have to? I just need to make sure I don't mess it up. So please be honest with me!! Thank you so much!!
hi so what about the speed is it same in both the routers? pls respond
You have configured two router by 192.168.10.XX and 192.168.20.XX. now i need the both way routing from one router to another router, ping from 192.168.20.xx to 192.168.10.xx and vice versa. how to do this routing from this two series. Would you please say me how to make this?
Can you settings connecting 2 routers use Wi-Fi ? like extender
Christino Lian via wds
@@gelo0175 thanks
You just set 1 Router and 1 repeater. That's all
@@gelo0175 Naiara deNaiara Naiara
. a trai cho em hỏi là muốn chơi võ lâm truyền mà game nó cho chơi 1 đường truyền mạng IP là 8 acc zị có cách nào cho đc chơi thêm acc nữa ko tại dư 2 máy tính mà ko vô thêm đc game nữa buồn
What if my main router uses pppoe configuration what should be my 2nd rount configuration
Mau tanya gan, bisa untuk tp link mr3420 ke mr3420 tidak? Atau mr3420 ke wr840n ?
what if u dont know the account of the server because they control yor modem?
Do you turn off the dhcp server on the 2nd router ?
Do u have to sign in all your devices phone any wireless cams etc into the 2nd modem even though password same , ive tried this and i get the impression you do , can u tell or clear that situation up please !!
i have same archer c50 but there is no WDS option in my router..
If you do it like this you wil have two range ip's at home.. So you wil neve finder another device in a network if one is connect to router 2 an first device with router 1...don't do it like this..
Bang mau nanya,,saya kan nembak WiFi Indihome pakai tp link tanpa kabel LAN/pakai hotspot dari Indihome,,terus saya mau memperluas lagi jaringan yg di router tp link itu dengan memakai kabel LAN,,itu gimana ya..jadi inti nya..Indihome ke tp link 1 memakai hotspot/tanpa kabel terus dari tp link 1 ke tp link 2 memakai kabel LAN,itu bisa ga,dan bagai mana cara pengaturan nya..mohon di jawab
Thank you NET VN
what is maximum cable length support?
70m
Merci pour l.explication
Merci de m.aider si je vais le brancher le cable dans 2eme retour dans le port LAN1
Do I need to disable DCHP on second router????
So double NAT on 2nd router and your devices are not on same broadcast subnet so won't see each other....yuk. Leave original router as 192.168.0.1. Turn 2nd router into simple switch/access point by setting its IP address to 192.168.0.2 , disable DHCP server on it and don't use the blue WAN port on 2nd router.
This work for me with four routers from 2 years.
Exactly... you are right. I do this all the time and am wondering why he didn't talk about disabling DHCP on the second router to avoid IP conflict. Nice video but at the beginning but messed up at the end.
i have this xiaomi router..you just sign in your mi account and set ssid and pass..plug and play..i was wondering why the dhcp was enabled but it was working just fine..
What are the pros and cons for his setup?
I only know one.
- to avoid IP conflicts
@@leonuneza2012 His setup is trash, because he's got two dhcps in two completely different ranges, you for example wouldn't be able to reach a NAS connected to router1 when you're on router2. It's much better to do as MrScracha says, I got it set like that with 3 routers (technically only APs) at home.
What is the purpose of connect 2 wireless router together than still using ethernet cable connect 2 router together?
Would it be easier by connecting an ethernet switch at the remote location with a ethernet cable from router or just use a wifi extender has ports.
you don't need to wire for connecting between 2 wifi router directly. its possible to connect 2 wifi router without LAN and WAN Connect from wire, that's called repeater.
that will cause high latency and network drop for most of the cases
Bang minta saran kalok logged out lost dhcp lease di sebagian jalur ,yang jalur lain aman kira-kira penyebabnya apa ya.?? Apakah dari router atau setingan mikrotiknya.trimakasih
you don't need to do this, all you have to do is to configure the 2nd router as a repeater.
access point is better, repeater lose speed.
Uthayamaran
@@rnegoro1 100% agree
And this video setup looses upnp features on router 2. If wiil connect via cable both routers, best configure router 2 on same network range and plug cable at lan port of router 2.
Thank you.
des cables ethernet droit ou croisé ?
you can make android phone 4g 5g network > share from pc > share from router >make new wifi ch
Please help me
If my main router is orbi ip adress 192.168.10.1. how i can program three more routers to share my line in lan to lan
I am using tp link router ip adress 192.168.0.1
If i changed my main router 192.168.1.1
I can use 192.168.1.220
Like this
But here my mainrouter is 192.168.10.1
Which ip number i can use in lan to lan connection
Please help me
you have been hacked :)
What if I didn't make any change to the ip?
Cách kết nối này gọi là kết nối nối tiếp router phải không ạ!
I typed in 192.168.10.1 and my router didn`t work. How can i know what IP adress change to?
man, you really have to spend some time learning networking instead giving crappy advices
bruh
Great work
Windows 10 and windows 11 not printer share others pc not access printer pls Explain solution
Thank you! :)
What was the gateway of 1 and 2 routers
Szuper :) Köszönöm!
muy buena explicacion lo logre de 20 minutos
огромное спасибо тебе. выручил
can we access router 2 settings page while connecting to router 1
Yes, if you can enable it on router 2 settings.
@@lccamilo How i can enable it
@@ZeeshanAhmad-lq5nc it would be better when you setup the 2.nd router as an access point
How to Tp link to mercusys connected?
muy buena explicacion graciassss
Bro so how can I login to that second router's deshboard from the main router
That's why you need to set two different IP addresses. He used 192.168.20.1 for the second router - so anywhere in your home network if you type your second router's IP address - you can login as admin to that piece of equipment. Hope this helps.
a great video
Mas o que adianta colocar um do lado do outro, se comodo atingido esta longe do mesmo jeito?
How to configuration 2.3 router on home router
I want both router both side access setup page
Example main router from access second router setup page and second router from access main router setup page if possible let's me know
Because we connect two routers main router lan and second router wan port connect cable.we only access second router from main router setup page we don't access main router from second page
Tenda 03 configuration already outdoor to first working in Wifi router (not a modem), second both wifi router by using Ethernet connecting share web browsing how to pc. how advice to me soon open tutorial video channel.
Why the 2nd router not in the same ip as the 1st wifi? Is it oke?
To prevent IP conflicts
On my wifi just some number of persons was connect remain is writing connect no access internet
What can I do it is in static
I face same issue
Se necesita tener internet en la laptop para hacer las configuración de router
Não precisa de internet para configurar
No
How to update firmware in tp link router
Model wr85
What is the color code of the cable to rj45 cross or straight?
bro, I am not finding the configuration of 2nd router. help me out please.
Thank Teachre
Reason for doing this is?
GOOD. THANK YOU.
the best!
WHATS THE HIGHEST DISTANCE FROM 1ST ROUTER TO 2ND ROUTER?
as far as ethernet cable can run (cat5e up to 100m @ 1Gbit/s)
Did everything shown in the video. It didn't work at all
Thank you
hai sir,, bago lang po ako para saan po pala ang router or tp,link pangpa lakas po ba yan ng hatak ng internet sir??
ser ginagawa yan kung gusto mong lumawak yung range ng wifi mo
yung main router mo nasa bahay then yung isa mong router nasa labas ng bahay
mas mahaba na range ng wifi mo
No sound?
Hello can i use this us wifi extender?
Wifi range to connect my neighbor?
@@juniorgabriel4113 First of all this video does not give full details you need to properly setup such network but to answer your question yes you can with a cable and not wireless because of distance.
Best Video.
How to limit speed in 2nd router via 1st router
As far as i know on this routers you can't limit speed.
How to Port Forward/Open Ports on a Wireless Router | TD8963N
ruclips.net/video/x9nWBg0DRyU/видео.html
كيفية فتح منفذ في الروتر لمشاركة السيرفرات
How to connect ...in several km distance away?
Option 1: use point to point wireless ex:cpe
Option 2: use media converter and fiber optic cable
Please sir one help me
Wi fi conect to
Tp link Archer c60 Router
Please reply my Answer sir
Nekem nemhagya megcsinalni a fazom fezbuk
This is way too much work, I used a more creative solution. I have my main router (FBI surveillance Van 42) connected to two secondary routers (FBI surveillance Van 171 and FBI supervisor 9) using power line adapters. I set the network names and passwords from my main computer before moving to 171 to the master bedroom and supervisor 9 in my wife's upstairs office. Easy peasy. I used three PLAs and two 6 foot cat 5 cables. Done.
What can the router 2 do that router 1 can’t?
Dj
I think that this is about getting wider internet range.
1st router model no plz so nice router i buy plz
TP-Link Archer C50
How to change password from 2 device
Two routers are connected, but no internet connection
DHCP OFF ROUTER 2 ,
why?
great!
You need to talk to tell me what you’re doing
شكرا
Nice
Зачем??? Есть репитеры!
6:03
Говорят будет двойной аппаратный NAT