How we connect with wire tl 841n tp link this router ... i have connected with wire but sometime it doesn't work .. when i restart than again working .. work somtime for 1 hour than automatically stop work and do not access the ip admin page .. plz guide me and give me solid solution plz
আপনাকে অনেক ধন্যবাদ, আমি অনেক ভিডিও দেখেছি কিন্তু, কোনভাবে আমার সেকেন্ড রাউটার কানেক্ট করতে পারছিলাম না। আপনার ভিডিওটা দেখে অবশেষে কানেক্ট করতে পারলাম,, অনেক সুন্দর একটা ভিডিও অনেক সুন্দর ভাবে বুঝাতে পেরেছেন। আশা করি আপনি ভবিষ্যতে আরো সুন্দর সুন্দর ভিডিও দিবেন আমাদেরকে। আবার আপনাদেরকে থ্যাংকস।।
Thank you for the video. I understand the time and efforts required to make such a video tutorial but then again, one should exercise utmost caution as many novices might follow the steps mentioned to the letter and would not be knowing anything else about private IP addresses, how to set IP addresses of their LAN/Wifi adapters etc. making them struck. The most important steps are left out such as how to connect to the range extender after changing its IP address and also disabling DHCP. I found the music to be quite distracting, but might be suitable for others.
at first it didnt work for me because i've change the channel same in your tutorial, after many tries the wds worked... I didnt change the channel configuration.. thank you for this tutorial Sir kudos!
Very nicely explained steps. The video would be more clear if it also explained that the step 3 of changing IP is to bring the devices into same network. And in step 4, the default gateway should be the IP of the primary router. But, never mind, its a Great video..and thanks a lot for the effort NET VN.
@@NETVN82 , can you add this very important info in your description? I think a lot of your viewers got lost in step 3 and step 4. Sad thing is if you didn't get step 4, you cannot access the Web Interface.
Thanks very much .. problem solved Tried many times .. seeing many videos .... final with ur video problem solved ......DWS we should give main router pws ...i got it now
Thank you very much! I extend my wireless from Airport Express(Main router) to TP-Link(extender) successfully. If your main router is Apple Airport Express/ Extreme/ Time Capsule, just set your extender router LAN IP address as 10.0.1.xxx :)
Thank you, all went perfect but only after initially resetting the repeater router and the following all steps. My main router has the ip 192.168.100.1 and i set-up the tp link repeater as 192.168.100.156 and it works wonders.
Thank you very much brother! I am trying this since couple of year's, and finally the day cones to me alhamdulillah ❤️ finally i am able to connect my 2 wifi router together without any ware. Thanks for your valuable tuitorial. Hope it will work for all 🎉
Thank you.. I did it.. 😊 Hahaha Actually I have plan to buy a wifi extender, I am just browsing how to install it when I get into your video, I looked for my old tp link router and try to do following your video step by step but I failed. 😊 I don't give up. LOL. 😊 And to my surprise.. I did it..yehey! Imagine. I save money for watching your video.. Thank you Stya safe and Godbless. 😊
Works for me. Thanks for video. Just a question.. I can't acces to the roter interface any more. I repeat 2 times, second time after resetting roter. Could you help?
In the video the DHCP is off, so we need to manually configure the IP in each of the devices. I am able to connect to the Wifi of the new device using this, but unable to connect to the internet. Can you let me know what I may be missing ?
I saw your video connecting 2 routers wirelessly and we only connected, now I have to reset the second router but the question is that the WAN which is the first router will not be reset, please reply.
Bravissimo ho seguito passo passo e sono riuscito.... Un mio amico tecnico informatico mi ha detto che era difficile, con i tuoi consigli tutto semplice 👍👍🤣🤣🤣
Ma dopo aver fatto tutto... il secondo modem...posso attaccarlo con solo l'alimentazione in qualsiasi zona o deve esser attaccato un Ethernet al modem primario
You have to fix a channel numer like 1 to 10 . Any number both of your router. Example : 1. Change your main router channel from auto to 1. 2. Change the channel of 2nd router also 1. *please change the main router cannel from auto. Because in auto mode it frequently changes its channel when it lost power. For this reason the secondary router can not connot connect to the main router because of different channel number. Thank you.
hey brother, hope you are safe and healthly. i wanted to extend the wifi range of home,bascialy to blanket everycorner of my place. i have 2 tplink routers: the main router (WR841HP) and the old router (WR740N),i tried to bridge the routers wirelessly but i failed let me knw if there is any way to do it. Thanks in advance.
Brother, But one query i faced that is ... when my primary router restart or after switched off when swtiched on then my Extender Router wont get connects automatically ..i need to reconfigured it every time. Soo any solution for that.. awaiting for your Quick Response.
I tried all these but I don't seem to understand why my own case is different. Once I disable the DHCP server in the secondary router I just can't log in to the assigned IP address and neither will it have an internet connection from the primary router! I'm using two Huawei routers (B535-956 as primary while B315-608 as secondary).
Hi there, i have a question you have changed the ip to 192.168.1.254 because thr main router is the same range ip address right?? And you disable the DHCP beause on main router you have DHCP right??? thnx
So... I did everything like that and my range extender works now, but every time I try to watch twitch while connected to it the chat doesn't work, does that have anything to do with the IP address? how do I fix it?
So I did all the steps correctly, did same thing over and over 3 times, after i reset and start from the beginning, No internet, same router same process, what could it be ??? ( I configured the router via ethernet cable, once i setup everything and its RUN i disconnected the cable and connected to the router WiFi and still no internet .. )
@@Cristian89Adrian connect one cable from your main router to secondary router say port 2 ( Lan Port ) and connect another cable from port 3 of secondary router to PC and try setting the same.
Hi, i did all those steps, it shows WDS Status: Run, DHCP Disabled... and still no freaking internet !? pls help.. i got the TP Link TL-wr841N, it should work !
Mình có thể kết nối TPlink router đến VNPT igate GW040H mà không cần dây mạng để mở rộng vùng phủ sóng (WDS)? Mình đã thử nhiều lần nhưng không thể kết nối thành công, enable WDS trên Tplink và kết nối đến igate OK (status : Run), nhưng không thể ping đến igate (không thể ra internet). Trước đây, tplink có thể kết nối với asus router dùng không dây bình thường. Nhưng khi router asus hư, mình trực tiếp đến igate thì không được. Hôm nay, mình lấy 01 con TPlink khác thì 2 con TPlink có thể kết nối không dây (WDS) với nhau. Liệu igate không hỗ trợ tốt kết nối WDS hay do mình cấu hinh gì chưa chuẩn trên igate?
So if i understand will have to wifi connections? One with the name of the main router and the other with the name of the second, right? It is possible just have one wifi in 2 different routers? Cuze everytime someone came home i have to give 2 wifis and 2 pass Or am i doing bad?
Seems to work but the setup is useless after main router restarts... The channel gets changed and I'll have to config again to identify.. Any suggestions?
Ini routernya disetting menangkap dan menyebar ya gan? Kalau mau disetting hanya untuk menyebar saja gimana? Nanti sumber internetnya disambung pakai kabel LAN
Thanks for this video but im still fighting to put my TP-Link to repeat, specially because im not sure if this is possible to repeat internet from a mobile phone that is working as hotspot. So I have a samsung mobile phone working as hotspot router, and because its not covering all my house, i tried to use my TP-Link router but it seems to be connected to the phone but does not display any internet, also the light for internet in this router is never shown. Any suggestions please? :)
the principal modem ip is 192.168.1.1 now i have a tplink i did it but i want use 192.168.1.1 for this tplink not for the principal router?? help me please?
@@NETVN82 do you mean, I should set a static IP in the bridge router for the connecting pc? (That wont work 'cos I cannot login) or I should set a static IP in the main router to the bridge router?
6 лет назад
I solved it, I didnt change the IP '192.168.0.1' to 196.168.1.254' (step 3) instead to '192.168.0.254' now i can login as admin, but after a while i have no internet connection when i connect to the bridge router. But i can restart it from the admin menu and then it works again..
i am v happy after see this video . But when i done this job. after i cant open my tplink modem again i use same ip which u use 192.168.1.254 but my modem is not open with this ip what ll i do ?
Is this works in connecting my desktop to wifi using an old router? the free lan cable is short in distance. So my option is to connect my old router to our new wifi modem
Show ALL Wi-Fi password with only 1 CMD ruclips.net/video/RC1GNOu_4YU/видео.html
How we connect with wire tl 841n tp link this router ... i have connected with wire but sometime it doesn't work .. when i restart than again working .. work somtime for 1 hour than automatically stop work and do not access the ip admin page .. plz guide me and give me solid solution plz
আপনাকে অনেক ধন্যবাদ,
আমি অনেক ভিডিও দেখেছি কিন্তু, কোনভাবে আমার সেকেন্ড রাউটার কানেক্ট করতে পারছিলাম না।
আপনার ভিডিওটা দেখে অবশেষে কানেক্ট করতে পারলাম,,
অনেক সুন্দর একটা ভিডিও অনেক সুন্দর ভাবে বুঝাতে পেরেছেন।
আশা করি আপনি ভবিষ্যতে আরো সুন্দর সুন্দর ভিডিও দিবেন আমাদেরকে। আবার আপনাদেরকে থ্যাংকস।।
This is the only video that worked for me! He has simplified everything perfectly and I really could understand him! Great job @Net VN!
Thank you for the video. I understand the time and efforts required to make such a video tutorial but then again, one should exercise utmost caution as many novices might follow the steps mentioned to the letter and would not be knowing anything else about private IP addresses, how to set IP addresses of their LAN/Wifi adapters etc. making them struck. The most important steps are left out such as how to connect to the range extender after changing its IP address and also disabling DHCP. I found the music to be quite distracting, but might be suitable for others.
at first it didnt work for me because i've change the channel same in your tutorial, after many tries the wds worked... I didnt change the channel configuration.. thank you for this tutorial Sir kudos!
Channel is shown when you scan.
Very nicely explained steps. The video would be more clear if it also explained that the step 3 of changing IP is to bring the devices into same network. And in step 4, the default gateway should be the IP of the primary router. But, never mind, its a Great video..and thanks a lot for the effort NET VN.
Thanks
@@NETVN82 , can you add this very important info in your description?
I think a lot of your viewers got lost in step 3 and step 4.
Sad thing is if you didn't get step 4, you cannot access the Web Interface.
@@added021502i can't open the page again after disabling DHCP
Wonderful video! Short, ad-free video. I didn't understand much but I did all the instructions and everything works perfectly!
Thanks very much .. problem solved
Tried many times .. seeing many videos .... final with ur video problem solved ......DWS we should give main router pws ...i got it now
Thank you very much! I extend my wireless from Airport Express(Main router) to TP-Link(extender) successfully. If your main router is Apple Airport Express/ Extreme/ Time Capsule, just set your extender router LAN IP address as 10.0.1.xxx :)
Does your internetspeed decrease?
Thanks for sharing Video with simple steps. With the help of your video i managed to user my old router as Range extender.
Yey, finally our old router has a purpose now!🤩 No more dead spot at home.😊 Thank you so much for the easy tutorial! 🤗❤👏
I dont have internet connection but i completed this video tutorial
Thank you, all went perfect but only after initially resetting the repeater router and the following all steps. My main router has the ip 192.168.100.1 and i set-up the tp link repeater as 192.168.100.156 and it works wonders.
Same i did, and worked. But i cant login to the repeater config anymore. Help me.
@@tirthankarbachhar Same issue, any update bro
@@tirthankarbachhar Did you ever figure out what the problem was?
same question here...
@@BigMackWitSauce
Confirm: It works! Wishing your channel all the best! Thank you.
must be very close to the main router when i setup or it doesn t matter? tnx for help😉
TP-Link should hire you.
Thank you very much brother! I am trying this since couple of year's, and finally the day cones to me alhamdulillah ❤️ finally i am able to connect my 2 wifi router together without any ware.
Thanks for your valuable tuitorial. Hope it will work for all 🎉
Спасибо, очень подробно, ничего лишнего. Добавил второй роутер за 15 минут, инструкция работает!
Thanks bro, i saw many tutorials but this was the one for me
Can we use this setting to connect our router to mobile hotspot to extend wifi range
Thank you..
I did it.. 😊 Hahaha
Actually I have plan to buy a wifi extender, I am just browsing how to install it when I get into your video, I looked for my old tp link router and try to do following your video step by step but I failed. 😊 I don't give up. LOL. 😊 And to my surprise..
I did it..yehey! Imagine. I save money for watching your video.. Thank you
Stya safe and Godbless. 😊
Thanks alot because of ur tutorial i set up again my router
Works for me. Thanks for video. Just a question.. I can't acces to the roter interface any more. I repeat 2 times, second time after resetting roter. Could you help?
same for me... got a fix?
The same here
@@delight8262 same problem
you didnt change the lan ip
same..
In the video the DHCP is off, so we need to manually configure the IP in each of the devices. I am able to connect to the Wifi of the new device using this, but unable to connect to the internet. Can you let me know what I may be missing ?
The ip address is not in same subnet with lan ip addrs . Error mssg
I'm having similar results too.
your number 1 bro try for this very long time finally i got your video and now its successful. thanks your greate
I’m just gonna buy 50 of these and bridge them over and over from Walmart to my house. And I’ll power them off solar panels.
Lol
Holy awesome!!!!! 😂😂😁
🤣🤣🤣🤣🤣🤣🤣
This video has been very helpful to me.
I have benefited a lot.
Thank you very much.
Good luck with my ♥♥♥♥
Glad it helped!
I saw your video connecting 2 routers wirelessly and we only connected, now I have to reset the second router but the question is that the WAN which is the first router will not be reset, please reply.
Thank you bro Love from Bangladesh
what a complete and perfect video u have made. i salute as i seen many video but they cant tell each and every thing but u did. Thanks.
Bravissimo ho seguito passo passo e sono riuscito.... Un mio amico tecnico informatico mi ha detto che era difficile, con i tuoi consigli tutto semplice 👍👍🤣🤣🤣
Ma dopo aver fatto tutto... il secondo modem...posso attaccarlo con solo l'alimentazione in qualsiasi zona o deve esser attaccato un Ethernet al modem primario
Thanks for the video.
My main router ip is already .1.254
İts optical 2.4
What should i do to make WR841 to work as repeater?
You have to fix a channel numer like 1 to 10 . Any number both of your router. Example : 1. Change your main router channel from auto to 1.
2. Change the channel of 2nd router also 1.
*please change the main router cannel from auto. Because in auto mode it frequently changes its channel when it lost power. For this reason the secondary router can not connot connect to the main router because of different channel number. Thank you.
Just a question: Is it possible to see devices connected to a local network without connecting to the network (= remotely)?
Its really working... Thanks broo...
hey brother,
hope you are safe and healthly. i wanted to extend the wifi range of home,bascialy to blanket everycorner of my place.
i have 2 tplink routers:
the main router (WR841HP) and the old router (WR740N),i tried to bridge the routers wirelessly but i failed let me knw if there is any way to do it.
Thanks in advance.
It worked..
Thank you very much ...🎉❤🎉
Heartly Thanks ....it worked..👍💯💯
Sir, how do I connect 2 routers using a LAN cable?
And how setting parameter on TPLINK TL-WR841ND.Hopely you can make video tutor.Thank you.
Brother, But one query i faced that is ... when my primary router restart or after switched off when swtiched on then my Extender Router wont get connects automatically ..i need to reconfigured it every time. Soo any solution for that.. awaiting for your Quick Response.
Same problem here, it stuck on obtaining ip adress! Did you find any solution for this?
Set wifi channel from your parent router to 11 from auto
thank for your tutorial in this video, my Tplink work using this tutorial brow
I tried all these but I don't seem to understand why my own case is different. Once I disable the DHCP server in the secondary router I just can't log in to the assigned IP address and neither will it have an internet connection from the primary router! I'm using two Huawei routers (B535-956 as primary while B315-608 as secondary).
Brother I'm using huawei router too. Did u find something to solve?
I do this approach for a while now with one issue : I have to turn off the repeater router every few hours to regain internet access again!
Liked the video and the classical music , what tune is it? It's a classic classic but what's it called?
Hi there, i have a question you have changed the ip to 192.168.1.254 because thr main router is the same range ip address right?? And you disable the DHCP beause on main router you have DHCP right??? thnx
Man, you’re the best
Greetings from Brazil
@Arturo Wayne I don’t have a girlfriend and even if I had one I wouldn’t hack her account, that’s stupid
Tq gan akhirnya berhasil juga,setelah di ulang² vidionya😂🤣 good job gan🙏😅👍👍👍
when u disable DHCP option if main modem off than router doesn't connect to mobile ... wht will be the solution sir ???
So... I did everything like that and my range extender works now, but every time I try to watch twitch while connected to it the chat doesn't work, does that have anything to do with the IP address? how do I fix it?
So I did all the steps correctly, did same thing over and over 3 times, after i reset and start from the beginning, No internet, same router same process, what could it be ??? ( I configured the router via ethernet cable, once i setup everything and its RUN i disconnected the cable and connected to the router WiFi and still no internet .. )
u must disable the dhcp server
@@zhamarabautisa6893 i gave up actually, but thanks, might try again, but did disable dhcp server....
@@Cristian89Adrian connect one cable from your main router to secondary router say port 2 ( Lan Port ) and connect another cable from port 3 of secondary router to PC and try setting the same.
@@racherlasanthosh6518 thanks will try and let u know..
i dont have computer or laptop.is it ok to use mobile phone to configure this?
Is it necessary that both router should be of tenda ??? Plz reply
You are the best , i have been watching bullshit until i found this , thanks
is this work if my main router is converge and my 2nd router is tp link t-lwr840n? thank u
Hi! After the configuration my tp link work only with the Lan doors but not with wi-fi. Can you help me to solve the problem? Thank you!!
If it's already named with one SSID, and already linked with main router, can we renamed same with the main router? Thanks
Love you brother❤😘Thank you so much....very helpfull video....thank you
So nice of you
Le seul tuto qui fonctionne réellement 🎉
Hi, i did all those steps, it shows WDS Status: Run, DHCP Disabled... and still no freaking internet !? pls help.. i got the TP Link TL-wr841N, it should work !
Even I’m facing the same problem....after turning dhcp off when router restarts im unable to connect 192.168.1.254
Try changing the WDS type from Auto to WDS1 or WDS 2.
thanks bro very useful video
Even though I dont change 2nd routers network address and default gateway of 1st router, wds working fine along with internet. How come?
sau khi tắc dhcp k truy cặp dc vào trang quản lya nữa.và mạng thì k có kết nối ạ..mong ad giúp
My router WDS status is stuck at init...
Is there any way to solve it??
What performance do you get with it as a repeater?
So thanx brother My router is being wifi i without any wire, such a way handle it like so brother
Mình có thể kết nối TPlink router đến VNPT igate GW040H mà không cần dây mạng để mở rộng vùng phủ sóng (WDS)? Mình đã thử nhiều lần nhưng không thể kết nối thành công, enable WDS trên Tplink và kết nối đến igate OK (status : Run), nhưng không thể ping đến igate (không thể ra internet). Trước đây, tplink có thể kết nối với asus router dùng không dây bình thường. Nhưng khi router asus hư, mình trực tiếp đến igate thì không được. Hôm nay, mình lấy 01 con TPlink khác thì 2 con TPlink có thể kết nối không dây (WDS) với nhau. Liệu igate không hỗ trợ tốt kết nối WDS hay do mình cấu hinh gì chưa chuẩn trên igate?
Will the Internet working on both Routers? But your system is connected with LAN throughout the process?
thanks a lot, successful installation.
with the subtitles, it was very easy to understand.
How to confirm the IP address of first router? After step 4 ,DHCP settings, than reboot, it's not showing status as "run" . Please help
So if i understand will have to wifi connections? One with the name of the main router and the other with the name of the second, right?
It is possible just have one wifi in 2 different routers?
Cuze everytime someone came home i have to give 2 wifis and 2 pass
Or am i doing bad?
yes , 2 wifis and 2 pass
If you don't want to do so, set the same wifi network name and the same wifi password
@@NETVN82 thanks man!
Yes
Seems to work but the setup is useless after main router restarts... The channel gets changed and I'll have to config again to identify.. Any suggestions?
Did you find out the solution for this?
I have tp-Link main router then I have a Dlink router so can I do this same setting on D-Link?? Then how to do?
Can I connect my modem with Tp link router without cable?
grt , THank u so much solved my problem
that music is sooo dope
After RESTARTING my main router, I am not able to access the net through repeater. It's showing "NO IP Allocated".
It worked. Thank you so much.
Thank you for helping me :D
Thanks
@7:33 after following this step it keeps telling me I can't reach that page when I refresh
Thank you very much worked
Any idea why DHCP needs to be disabled on the repeater router?
learn what is dhcp to know why
Video yg bagus dan bermanfaat👍👍👍👍
i cant access the router's interface after changing IP to 192.168.1.254
help please. i want to rename my SSID and change password
Now u can access with the current ip 192.168.1.254 i think
@@zedplayer1402 same issue... dont work, i can only conntect to the main router now
@@MarcoStettlerCH same problem
@@hridoyksp2896 same
Just factory reset it or connect with jour phone
Thanks Bro. Its working
Ini routernya disetting menangkap dan menyebar ya gan? Kalau mau disetting hanya untuk menyebar saja gimana? Nanti sumber internetnya disambung pakai kabel LAN
Thanks for this video but im still fighting to put my TP-Link to repeat, specially because im not sure if this is possible to repeat internet from a mobile phone that is working as hotspot. So I have a samsung mobile phone working as hotspot router, and because its not covering all my house, i tried to use my TP-Link router but it seems to be connected to the phone but does not display any internet, also the light for internet in this router is never shown. Any suggestions please? :)
Can we take this tp link router to any where or we have to fix in some fixed place
Thanx. It works👍
2020 nyoba masih work, thanks
Worked perfectly 😊
Great!
My router shows WDS status as "init.." . Help pls
disable 5.8g
@@bosstronix4970 how to do that?
For me it worked by leaving DHCP enabeld
Keep channel on auto it worked for me by that
It's not working...any suggestion plz
Thank you for straight. Can attach a third router to the second, the same way?
Yes, but the speed will be slow
@@NETVN82 I found another solution. Anyway, good video. Thanks Net VN 😉
Ander Yuk what’s the solution you found?
Thanks a lot buddy, thanks a lot...👍👍👍✌️
Working!Thank you!
You're welcome!
does it need lan cable or can connect wireless?
the principal modem ip is 192.168.1.1 now i have a tplink i did it but i want use 192.168.1.1 for this tplink not for the principal router?? help me please?
you change ip address of main router
the bridge mode works, but i cannot login to admin surface of the secondary router anymore if i type 192.168.1.254 timeout error... any idea?
set static ip for your pc
@@NETVN82 do you mean, I should set a static IP in the bridge router for the connecting pc? (That wont work 'cos I cannot login) or I should set a static IP in the main router to the bridge router?
I solved it, I didnt change the IP '192.168.0.1' to 196.168.1.254' (step 3) instead to '192.168.0.254' now i can login as admin, but after a while i have no internet connection when i connect to the bridge router. But i can restart it from the admin menu and then it works again..
Thanks brother,you help me!
i am v happy after see this video . But when i done this job. after i cant open my tplink modem again i use same ip which u use 192.168.1.254
but my modem is not open with this ip what ll i do ?
Same here cant login my modem any solution?
Grazie...Funzionale e connesso...Grazie.
Is this works in connecting my desktop to wifi using an old router? the free lan cable is short in distance. So my option is to connect my old router to our new wifi modem