Это видео недоступно.
Сожалеем об этом.
Saving Wood - Saving twisted and warped boards
HTML-код
- Опубликовано: 6 сен 2024
- In this video I give you a quick overview of the method I use when I am trying to keep as much width and thickness to a board when it is affected by cupping and twist.
For more woodworking related content visit and like
www.JordsWoodSh...
/ jordswoodshop
/ jordswoodshop
It always makes me happy to see the band saw put to good use.
This is a phenomenal tip. Only video I’ve seen on RUclips describing this technique. Saved myself a $1600 slab. Thank you so so much.
That was actually worth every minute of my time!
Oh, well done, very well. That is counterintuitive and I would never have thought of it. Thanks, mate!
Dude thank you so much, I have a flitch of beautiful black gum full of checks that’s twisted cupped and warped. This will help so much.
This is great. But how do remove a cup if you want to use the full boards whole width?
love ya videos. i have a unique issue and im reaching out for advice. I made a 'Barn Door' rustic style made of heart and sap Rimu, essentially 150yr old home cladding weather boards (25-35mm thick). the door is 2.2m x 1.4x wide and on wrought iron roller system with soft close.
The issue is is has warped (due to construction method and possibly drying of the wood). I would love to send photos to enable you to offer advice on how i can straighten this item.
As well as being a very informative video the presenting style was absolutely lovely. I’m definitely subscribing to see more.
Why I did not think about that before! It is so nice method.
Exactly what I was looking for! Thank you!
Agree 100%. I've done this many times as well and it works!
Sweet, I just need a 1500 dollar jointer.
Check out making a straight edge sled for your table saw. You can basically turn your table saw into a jointer.
Same!
Best explanation after watching many videos on this topic
Well done sir. So much lumber ends up tossed these days. You managed to curb this waste :o)
Cutting a severely cupped board in half is one of the first things I would do. I have had to do this on a number of projects. It's a pretty common practice.
aagghhhhh THATS JUST WHAT HE DID,,DO YOU NEED SOME ATTENTION ?,,HEY EVERYONE LOOK AT ME
Hi Jordan,
I'm not sure, if you do this, but at school we where allways taught to glue the hearts away from each other, this to combat future warping.. as the tensions run againts each other.
Just wondering if you did the same at the end, or just glued em together?
I think that's useful when you're working with two original boards, as you say so that the tendency of each board to warp is in opposition to each other. In this demonstration, he glued the two halves back together without flipping them, minus a thin V sliver, to flatten but also to give the appearance of one unaltered board again, which he in part achieved by striking his cut line along the peak of the cupping using the chalk line.
great way to save wood, well done my man
damn, where has this channel been. Epic video
That's a very good tip that I will definitely use in the future
Clever and effective. Thank you.
how can i fix twisted joined table top
Cut it into thirds and flip the center section.
So if i bought wood that twist a bit but still use it and drill it with 10 cm screws, is it ok or am i basiaclly fooked? (im building a really sturdy 2m high aquarium rack 100x60cm the corner pieces are 2by6 inch i think and those are the ones twisting abit) Now i know this an old vid so im prolly not even get a replay, but good video non the less!
Thank you sir. Fantastic explanation
Good to hear an Aussie voice on here (where r u ?)
from a Perth based mens shed member :)
Do you even use boards with the pith of the tree through the centre e.g. for table tops? I always thought they are to be split, pith taken out as waste or as a filler elsewhere.
+Tome4kkkk that's right, the pith gets removed, the bored in this video was the last cut before rotating the log to get around the pith.
I'm not sure I get everything right. You're saying the pith has been removed but you also say in the video that the board halves match up perfectly. So is it "perfectly for halves of a board from which the pith has been removed"?
Did you buy a guard for your jointer? That was the old unit with the guard missing, no? Thought you made a wood guard for it, or was that not working out.
That was my other jointer (the 16" one) that I made a guard for, the jointer in this video it was just my small 8" jointer which obviously has a stock guard.
nicely done, mate
dear viewer, skip to the middle of the video to get to the actual process....
Thanks
Jord, Very informative. Thanks for posting the video
Very good video it was well explained
Thanks for the video! I'm getting a twist in the board when I face joint it. What am I doing wrong? It's very little, but very annoying..
be careful when you are applying your pressure to your board when moving across the jointer. Most likely, you are getting that because of a gouge or "snipe" at the end. Apply your pressures just after the blade set and just above.
How about putting the board on something flat with weight on top for a day or two, it worked for me before, although it was pine and not sure if it works on harder lumber. From what I recall, it wasn't 100% straight but better than it was at the beginning... Is just a suggestion, no guarantee that it wont bow, curved, etc.
Very nice tip, thanks
great work thanks so much for posting.
So, did you end up getting the 'twist' out? How?
by sawing in half, then jointing
Wow, what are great explanation! Thank you!!
Good video. Thanks for the info
Great explanation!
Very useful - thanks!
Thanks Jord!
thank you so much for this video
that was solid. thanks!
Awesome tip!
Hey, this is very useful. Thanks!
That's brilliant, thanks!
Genius
BTW, most useful information!
Es una lastima, que la traducción en Castellano sea tan mala
il senso di questo filmato???
I really like the Stodoys plans.
That was worth the click to subscribe .. ok … more than that, but I don't want it to go to your head.
Hey y'all my new website is now live for wooden surfboard and SUP kits, Check it out: www.DIYsurfboardkits.com.au
doesn't solve the problem. you can always cut / plane down large boards to smaller straighter ones. lets see getting that board flat as is...
Steve Oakley You must be super fun at parties
Jords Wood Shop i wouldn't be at your party for sure so you'll never know
This is a video. All this talking can be done while you show us every step.
Talking to much
*too
Andrew Collier Thanks, He still talk "too" much
Al T-Wing "talks" to much.
Wow, what are great explanation! Thank you!!
That was really useful!