In your experiment your doing stage by stage increasing of speed ,how ? I see a motor two wire that exit but no other controls ,so what you using ? To increase speed ?
“I neveh like mowtows wiht bushes, but dihs one has bushes so, oh whell werr stuck wiht et..” .... *_Bushes_* 🤣 ... Keep up the good work with your vids, you do good work, and I would like to get my hands in one of those Indian motows, cause that universal one you’ve got there just wants to keep on and keep on and keeeep onnn gettin’ it..!
cool info, rather than use the noisy geared drills as the primary source, get a 12v compressor plus tap and make a simple cd tesla turbine with chuck to turn them, far quieter and less air required for the low 2000 revs range, give it a go. then with a large set of vertical compressed air bubblers and running water supply, make a 'trompe' to feed it the air as primary or secondary power source.
Instead of using those heavy bulky junky motor magnets... Try using little neodinium magnets and install 6 of them and then see what kind of voltage you get.... If you can find the long slim neodinium magnetic bars... Use them... And WATCH...
I would get "Ripley" to take a glance at the spider. Not to be mistaken with Ripley's but Ripley. Another thing I would definitely definitely don't go back wherever you got that engine at.
as Wylie Coyote says often , Ahh dat skwoowy Roadrunner , i'll get him somday , Well back to the ol drawing board , things to do : place new Order from: ACME Motor Parts Co.
I call bullshit on the last part of the video. Fake burn. Why did you not record the burn? Did you have the project running off camera? Why? Also the burn marks does not at all resemble what a failure like that would look like, nor does the damage to the "transformer". Looks more like you burnt it with a blow tortch or lighter or something.
BEST BATTERY CHARGER DIY VIDEO - ruclips.net/video/ZN3saILbYUw/видео.htmlsi=9_nLu0vKOqfn4zi_
*Join this channel to get access to perks:*
ruclips.net/channel/UCWFbPzBb7dCyCWuBA-DBrMAjoin
*Mr.Electron Patreon's Page* - www.patreon.com/mrelectron
*Hindi Channel* - www.youtube.com/@Mr.ElectronHindi
*Alternator Channel* - www.youtube.com/@mrelectron_alternator
*Watsapp Channel* - whatsapp.com/channel/0029VaQmmRaFCCoWOf7huh3G
Hey, your videos are stunning and fantastic - none of them are fake or scams
Gimme all your generators or magnets
Thannks 😃😃😃😊
Thannks 😃😃😃😊
I like this guy because none of his videos are fake
Where do I find these magnets at home?
Oh, let me guess - a DC motor 12v 32 amps. Or a hair dryer dc motor 2200w
SO by placing magnets on the rotor and stator you remove the bruches?
bon travail , bien expliquer , je suis Français j ai bien compris , merci
You have good discription on what your showing in step with parts meter output forward reverse bias voltage n amps
Whee did you buy air compressor you . Used for this experiment
In your experiment your doing stage by stage increasing of speed ,how ? I see a motor two wire that exit but no other controls ,so what you using ? To increase speed ?
23:00 the rectifier on the output of your ac transformer has cheap low amp diodes, the blue cap is providing "short term load" only
Easy to follow your experiments, good job of your explanations.
Hello, Mr. Electron. I have 1 question, What the difference between Ac motor and DC motor? Please 👍👍👍
Did you leave the brushes out?
“I neveh like mowtows wiht bushes, but dihs one has bushes so, oh whell werr stuck wiht et..” .... *_Bushes_* 🤣 ... Keep up the good work with your vids, you do good work, and I would like to get my hands in one of those Indian motows, cause that universal one you’ve got there just wants to keep on and keep on and keeeep onnn gettin’ it..!
cool info, rather than use the noisy geared drills as the primary source, get a 12v compressor plus tap and make a simple cd tesla turbine with chuck to turn them, far quieter and less air required for the low 2000 revs range, give it a go.
then with a large set of vertical compressed air bubblers and running water supply, make a 'trompe' to feed it the air as primary or secondary power source.
Chiar îmi place canalu acesta îl recomad cu placere
Good job 👏👏👏👍
Hi, I would like to ask you about DC motor my 1016 24 volt, if I run this motor with 36 volt ,is it ok or can damage this motor, thanks.
кратковременно не испортит , но под нагрузкой ресурс значительно снизится
Many thanks.
Amazing video
thanks for motor videos it helps much
can you compare universal motor to pmdc at same input power.??
eg 2 motors both at 50w
its difficult to buy and try motor XD
sure !
If you can help me to buy it
Legendary WD-40 😊
Please details about 775 motor generator
I,m Stavros .N and you probably have seen my comment in another video. I also don't like motors with bushes, but the dead spider was cool.
Thank you brother
I love how you analyze everything, even a dead spider in the motor haha.🤣
Nice
@@electricmotor8186i love motor
LOL -spider ?
I was thinking that More is infinite ♾️ 😅😅😅
😀
Thank.youfor.your.experience
Instead of using those heavy bulky junky motor magnets... Try using little neodinium magnets and install 6 of them and then see what kind of voltage you get.... If you can find the long slim neodinium magnetic bars... Use them... And WATCH...
Hola buenos días, se podría traducir al Castellano?
O not another episode avout and on f. Dc motors pls if u can make on something motors pls .......
I would get "Ripley" to take a glance at the spider. Not to be mistaken with Ripley's but Ripley. Another thing I would definitely definitely don't go back wherever you got that engine at.
Thank you .
Bro sewing machine moter mork in 9v dc in next video
Dc 9v
as Wylie Coyote says often , Ahh dat skwoowy Roadrunner , i'll get him somday ,
Well back to the ol drawing board ,
things to do :
place new Order from:
ACME Motor Parts Co.
Thanks.
Радиолюбитель!
Хотел написать радиогубитель
ur not stuck with the bushes, shave them.. i mean screw those bushings, get bearings that fit, they make bearings the same exact size
Super bro
And how to make High efficiency relay switch inverter 😄😄😄
Dead spiders, can be found inside every motors everywhere.
😜 😜 😜
That's not a DC motor that's AC (Alternative current) motor.
picha una traducción al castellano seria very good
Good good
Awesome
Amazing
Cooool
hola
Wowowowow
I call bullshit on the last part of the video. Fake burn. Why did you not record the burn? Did you have the project running off camera? Why? Also the burn marks does not at all resemble what a failure like that would look like, nor does the damage to the "transformer". Looks more like you burnt it with a blow tortch or lighter or something.
индусы и электричество не совместимы
"aluminium"?? who taught u english boy lol :p jus jokin
Misleading
I hate motors aftr i saw ur ideos
The red crown nomenclaturally stretch because bolt contrarily tie absent a debonair team. rainy, accidental database
Guys, guys, guys ....annoying ...
picha una traducción al castellano seria very good