8 kph In general, wind speeds are as follows: 8 kph (2 m/s) minimum is required to start rotating most small wind turbines. 12.6 kph (3.5 m/s) is the typical cut-in speed, when a small turbine starts generating power. 36-54 kph (10-15 m/s) produces maximum generation power.
Super!!! congratulations!!!.Maybe if you install a electrolitic capacitor, you will have the actual voltage * 1,414 = Peak value. You actual voltage is R.M.S. Awesome job!!! thank you for the video. Salute from Buenos Aires ,Argentina.
8 kph (2 m/s) minimum is required to start rotating most small wind turbines. 12.6 kph (3.5 m/s) is the typical cut-in speed, when a small turbine starts generating power. 36-54 kph (10-15 m/s) produces maximum generation power. At 90 kph (25 m/s) maximum, the turbine is stopped or braked (cut-out speed).Answer for ur minimum speed for a small turbines. Do I win anything?
С такими лопастями ветродвигатель малооборотестый. Для генератора нужны обороты побольше. Для ветрогенераторов надо применять пропелерные ветродвигатели. Они дают более высокие обороты. А потом ещё повышающую передачу. Я когда-то читал в нашей местной газете за нашего земляка. Он сделал Ветряк с класическими крыльями. Ветроколесо у него было в диаметре 6 метров. Для этого он построил мачту с железных труб и угольников высотой 15 метров. Под хороший ветер со скоростью 5 - 6 метров в секунду этот ветряк выдавал мощность до 6 киловатт. С помощью механических передач он вращал свои крупорушки, циркулярку, небольшую мельничку, заряжал автомобильные аккумуляторы. Генератора под 220 вольт у него не было в то время.
a universal motor has a field coils in series with the armature ,to reverse the armature also reverses the field coils polarity so it will run on dc or ac.
Run DC motor by using hydraulic and spring so we give our power to hydraulic and it will winding up the spring which turned the dynamo and electricity can cook our food by microwave oven with DC voltage ?
Hello, could you please specify the parts used in your video??? used a bridge rectifier, which ??, and a capacitor of how much??? and this transformer is for how many amps???
como ele acendeu uma lâmpada de 220 volts se o gerador é de 12 e 24 volts ,estou sem entender . Pela lampada ser de 100wats tudo bem,o gerador é de 400 wats. Só quero entender a parte da voltagem! estranho!
Whenever you convert ac to dc, the dc output voltage will be equal to dc 33% more than the ac voltage, the higher current is due to the high value of the filter capacitor
It was a very nice video. Sir in your video you have used the pvc pipes exactly vertically for propeller, what happens if they were to be tilted a little bit say like 30 to 45 degrees? Is it possible that even with low wind power the propellers move faster?
This can be possible by considering two things... U can install gear wheels, so at low wind, shaft will move fast, and also remember to apply a good bearings. The same things are used in actual wind plants.
dibakar dutta :: I thought 8 vanes plus your tilting idea of so many degrees plus a ‘tail~vane’ to orientate the propeller into ‘facing’ the wind. Would you tilt towards the shaft or @ the tangent or rotate the concave surface area of the pvc vane while keeping it vertical. It is quite the puzzle and I am interested in your ideas.
Atul Kumar Rai : to use a thrust bearing or other genuine bearing that the Maker didn’t have to sweat and pound into the hub would improve the rpm’s...imo
Gostei das matérias, porém achei um que não devesse cortar os fios que não iria usar nos transformadores tão rentes à bobina, inutilizando o transformador para outras aplicações que, por ventura, precise dos dois enrolamentos. Obrigado por compartilhar.
It shows the assembly of the wind turbine very precisely and the video is fantastic! This video is very inspiring! the creator or builder! I wish everyone a beautiful day, strength, health! 👍📸🎵👨🔬🛠💨☸️⚡️
Dude if you took two seconds to take a grinder on that rust then you wouldn't be using up so much welding material Seriously it hurts to watch you use up so much material when you could be using half as much while you're welding
Now use Wheel bearings of a car to suspend the Wind actuator, connect a bigger V shaped wheel below and use a cars belt or a bigger one to drive the generator. Then you can even drive more than only one generator at the same time. For example 2, 3 or more generators from old cars.
Time 17:21 Bhai pablik ko bewakoof samjha hai kya.. Hame bhi pata hai ki Dc.volt alag hote hai aur ac volt alag lekin aap ac volt naap rhe ho dc motar PR Kamal hai bhai
Look at the shaft wobble on that wind turbine and you crazy with that welder looks like it's on full blast 😭 they need a clutch system so it can rotate freely
Well, you have to consider the welding amps needed to blast through years of rust. With enough power (say 150 amps) you don't have to scrape, sand, wire-brush, or even chew any debris from the metal surface before welding. Of course the quality and strength of the welds are pathetic, and dangerous for that matter. But, this is a part of the world where quality is uncommon, and life is cheap.
saludos amigo de cuanto es el capacitor que usaste con la fuente de 12V Greetings friend of how much is the capacitor that you used with the 12V source
Peace be upon you / I would like to buy one electric generator that works on wind power, can you send one and how much the price will go to Saudi Arabia and thank you.
The sort that measures voltage current and resistance, reasonably accurately (last part optional for this purpose) One excellent electrical experiment I'd advise to anyone at your point in the educational path is to try typing the words multimeter price delivery into a search engine and then pushing the return key. It's amazing how much can be learnt from the simplest of exercises :-)
@@So1ipse or just being a normal person and only offering useful information like the op did. instead of bashing someone for asking questions which are logical . some advice for you. think before you type, show some respect, and treat others like you want to be treated. you had to learn before so questions are not being lazy .typing what you said could return thousands of results which they may never find the one in the picture for a long time. simplest common courtesy :)
@@cptrush3671 You are quite right, I like to think I'm not usually one of the 'go ask duckduckgo' crowd. There were reasons that aren't excuses and the question did bite a little deeper as a detailed answer looked to matter even less than usual. Regardless, yes, my apologies for the wasted bandwidth.
I know this is a few years late but I did not see right away the answer to one of your question. And that is who invented the first alternator (also called at the time of invention an AC generator) And that would be Nicola Tesla.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
*Mr.Electron Patreon's Page* - www.patreon.com/mrelectron
*Hindi Channel* - www.youtube.com/@Mr.ElectronHindi
*Alternator Channel* - www.youtube.com/@mrelectron_alternator
8 kph
In general, wind speeds are as follows: 8 kph (2 m/s) minimum is required to start rotating most small wind turbines. 12.6 kph (3.5 m/s) is the typical cut-in speed, when a small turbine starts generating power. 36-54 kph (10-15 m/s) produces maximum generation power.
Parabéns pelo seu talentoso trabalho
Music at minute 15:09? Thanks
Porque no das las medidas de lo que haces sería más genial
@@angelmendoza2405 Ese aerogenerador no sirve para nada, necesitas un huracan para que pueda generar unos 200 V, mucho trabajo para nada
Very nice congratulations to you
Thankyou Grand Dad. 🙂
ขอบคุณที่แชร์วิธีทำดีๆให้ดูนะครับ
Super!!! congratulations!!!.Maybe if you install a electrolitic capacitor, you will have the actual voltage * 1,414 = Peak value. You actual voltage is R.M.S. Awesome job!!! thank you for the video. Salute from Buenos Aires ,Argentina.
Hi
d
8 kph (2 m/s) minimum is required to start rotating most small wind turbines.
12.6 kph (3.5 m/s) is the typical cut-in speed, when a small turbine starts generating power.
36-54 kph (10-15 m/s) produces maximum generation power.
At 90 kph (25 m/s) maximum, the turbine is stopped or braked (cut-out speed).Answer for ur minimum speed for a small turbines. Do I win anything?
Понравился ваш видио класс спасибо большое за видео
Do you have to have 12v battery to start power with it
Hi dear,,you superman.thank. you.
Arkadaşım,sen çok faydalı bir ADAM,,"sin..
Teşekkür ederim kardeşim. 👍
С такими лопастями ветродвигатель малооборотестый. Для генератора нужны обороты побольше. Для ветрогенераторов надо применять пропелерные ветродвигатели. Они дают более высокие обороты. А потом ещё повышающую передачу. Я когда-то читал в нашей местной газете за нашего земляка. Он сделал Ветряк с класическими крыльями. Ветроколесо у него было в диаметре 6 метров. Для этого он построил мачту с железных труб и угольников высотой 15 метров. Под хороший ветер со скоростью 5 - 6 метров в секунду этот ветряк выдавал мощность до 6 киловатт. С помощью механических передач он вращал свои крупорушки, циркулярку, небольшую мельничку, заряжал автомобильные аккумуляторы. Генератора под 220 вольт у него не было в то время.
The inventions I have come across through this medium has given me the boost to bring out my invention to the world
Waiting
Amps output from the wind turbine?
Wow amazing, very good.
Costa Rica. 👍👍👍👍👍👍
a universal motor has a field coils in series with the armature ,to reverse the armature also reverses the field coils polarity so it will run on dc or ac.
And now that he has replaced with a permanent magnet, it cannot run on AC. it will only vibrate to and fro
31:40
on the shaft, you need to glue paper or rope to visually fix the rotation.
What is the of the capacitor are you using
لو سمحت ممكن تكتب نوع المكثف والقطعه التانيه الي مغزيها المحول
Hello, can you write, please, I wonder what the name of the central cables in the middle is?
What is the use of the capacitor pl. explain
Run DC motor by using hydraulic and spring so we give our power to hydraulic and it will winding up the spring which turned the dynamo and electricity can cook our food by microwave oven with DC voltage ?
Hello, could you please specify the parts used in your video??? used a bridge rectifier, which ??, and a capacitor of how much???
and this transformer is for how many amps???
Which motor is been used here. You have not listed the details of motor.
É qual a velocidade do vento p/rodar essa turbina?
como ele acendeu uma lâmpada de 220 volts se o gerador é de 12 e 24 volts ,estou sem entender .
Pela lampada ser de 100wats tudo bem,o gerador é de 400 wats. Só quero entender a parte da voltagem! estranho!
bonjour explication pas info sur la puissance du capa du condo merci
Great cooling setup for Graetz, masterful understanding of no-load current requirements and definitely top quality welding.
Nilai kapasitor jeung dioda na sabaraha Jang?
Can u please mention the big capacitor (blue) values?
Whenever you convert ac to dc, the dc output voltage will be equal to dc 33% more than the ac voltage, the higher current is due to the high value of the filter capacitor
Is very good happy for these watch videos
ممتاز جدا... شكرا لك على هذا الموضوع الجميل والشرح الوافي... good thanks
Comment s'appelle cette bobine et ses caractéristiques
It was a very nice video. Sir in your video you have used the pvc pipes exactly vertically for propeller, what happens if they were to be tilted a little bit say like 30 to 45 degrees? Is it possible that even with low wind power the propellers move faster?
This can be possible by considering two things... U can install gear wheels, so at low wind, shaft will move fast, and also remember to apply a good bearings. The same things are used in actual wind plants.
dibakar dutta :: I thought 8 vanes plus your tilting idea of so many degrees plus a ‘tail~vane’ to orientate the propeller into ‘facing’ the wind. Would you tilt towards the shaft or @ the tangent or rotate the concave surface area of the pvc vane while keeping it vertical. It is quite the puzzle and I am interested in your ideas.
Atul Kumar Rai : to use a thrust bearing or other genuine bearing that the Maker didn’t have to sweat and pound into the hub would improve the rpm’s...imo
How to produice electricity with alternator of electrogene groupe with magnet ?
You are brilliant.
How long can it run before the carbon brush runs out or burn out.
Gostei das matérias, porém achei um que não devesse cortar os fios que não iria usar nos transformadores tão rentes à bobina, inutilizando o transformador para outras aplicações que, por ventura, precise dos dois enrolamentos. Obrigado por compartilhar.
It shows the assembly of the wind turbine very precisely and the video is fantastic! This video is very inspiring! the creator or builder! I wish everyone a beautiful day, strength, health!
👍📸🎵👨🔬🛠💨☸️⚡️
Dude if you took two seconds to take a grinder on that rust then you wouldn't be using up so much welding material
Seriously it hurts to watch you use up so much material when you could be using half as much while you're welding
Hola, buen trabajo, me podría desir donde puedo conseguir un jenerador como ese 14:26,gracias
Awesome like to have more info about this alternator conversion am wondering if this can run a go cart
Nice project
No reason why it shouldn't
How many amps can such a transformer normally generate?
Where i wan buy
Wow! Amazing video, I want to learn from you.
What is the blue cylinder next to it
good idea
Now use Wheel bearings of a car to suspend the Wind actuator, connect a bigger V shaped wheel below and use a cars belt or a bigger one to drive the generator.
Then you can even drive more than only one generator at the same time. For example 2, 3 or more generators from old cars.
Very good
Sr 64 A rectifier ka video bna dekao connection kistrah he
Time 17:21
Bhai pablik ko bewakoof samjha hai kya..
Hame bhi pata hai ki Dc.volt alag hote hai aur ac volt alag lekin aap ac volt naap rhe ho dc motar PR Kamal hai bhai
De cuanto es el capacitor que va al transformador
What r the components required?
awesome
ruclips.net/video/R4gdPLx4now/видео.html
❤️
I want chang seving maci mottor 220 v Ac to 12v Dv help me plese
Awesome videos. The only problem i have is the high background music.
Minimum speed for wind turbine is 12 to 14 km/h. And 50 to 60 km/h at Max.
En Vacio la tension es alta , con consumo es otra cosa, un motor libre como generador se puede mover , con carga se pone duro como una piedra
Good experiment sir....
can u plz tell me the bridge rectifier capacitor used in this project i require the specification
metal case bridge rectifier - search google
thnx
Can u plz make a vid u holding the axle and then turn on the startermotor ?
:Q
What is the capacitor caracteres?
Comment produire de l'électricité avec l'alternateur d'un groupe électrogène de 150 KVA, à l'aide des Aimants ?
0:02 I have this motor
This is a car radiator fan motor high torque
What is the value of the capacitor
thank you for the video good luck always awaited my next video from indonesia
ruclips.net/video/R4gdPLx4now/видео.html
Look at the shaft wobble on that wind turbine and you crazy with that welder looks like it's on full blast 😭 they need a clutch system so it can rotate freely
Well, you have to consider the welding amps needed to blast through years of rust. With enough power (say 150 amps) you don't have to scrape, sand, wire-brush, or even chew any debris from the metal surface before welding.
Of course the quality and strength of the welds are pathetic, and dangerous for that matter. But, this is a part of the world where quality is uncommon, and life is cheap.
@@marshalllhiepler relax first worlders. He is not using it but just wanted to demonstrate how it can be done.
Really you are electronics engineer and genius, congratulations,and thanks for yours videos
Very fast and good
Wow is good
saludos amigo de cuanto es el capacitor que usaste con la fuente de 12V
Greetings friend of how much is the capacitor that you used with the 12V source
8.000uF a 100V
nice keep up the good work
Sei molto bravo complimenti
Peace be upon you / I would like to buy one electric generator that works on wind power, can you send one and how much the price will go to Saudi Arabia and thank you.
Hi..
Can i know what model the grey multimeter you used
That's a Mustool Multimeter Oscilloscope type.
The sort that measures voltage current and resistance, reasonably accurately (last part optional for this purpose) One excellent electrical experiment I'd advise to anyone at your point in the educational path is to try typing the words multimeter price delivery into a search engine and then pushing the return key. It's amazing how much can be learnt from the simplest of exercises :-)
@@So1ipse or just being a normal person and only offering useful information like the op did. instead of bashing someone for asking questions which are logical . some advice for you. think before you type, show some respect, and treat others like you want to be treated. you had to learn before so questions are not being lazy .typing what you said could return thousands of results which they may never find the one in the picture for a long time. simplest common courtesy :)
@@cptrush3671 You are quite right, I like to think I'm not usually one of the 'go ask duckduckgo' crowd. There were reasons that aren't excuses and the question did bite a little deeper as a detailed answer looked to matter even less than usual. Regardless, yes, my apologies for the wasted bandwidth.
Very interesting.
Transformer with UPS for a maximum of 6 volts, maybe 7 volts.
Keren pisan Kang . . .
I would appreciate it if you make the video of 5.000 watts and 10.000 watts inverter, thank you
www.ti.com/tool/TIDM-HV-1PH-DCAC#0 p.e.
www.eenewspower.com/news/200kw-sic-inverter-evaluation-board-uses-ai-reduce-battery-size-and-weight
احسنت 🇰🇼well done
Класс! ветрогенератор из чего сделан?
Thank.for.you.bravo.
good job man ty
sir ,koi aisa 12 dc moter bataiye jo car alternater ko chala sake.
Interesting video
Because of capacitor that supply the required voltage :)
chida la música la del comienzo ...como se llama ?
Надо было ветряк через редуктор делать.Для больших оборотов.
Q of the day:Where did you get the magnets? 🤔
I know this is a few years late but I did not see right away the answer to one of your question. And that is who invented the first alternator (also called at the time of invention an AC generator) And that would be Nicola Tesla.
Сварщик огонь
You are showing us open circuit voltages !
Great job..
Chào tất cả rất tuyệt vời cũng như mình đang dùng để nạp quạt gió vào bình và khi ko có gió cắm nạp bình vậy chuyển liên hoàn ok
I appreciate your creativity, sir.
I think it was tesla who invented d alternator
@@philipgayudanok4525 Thanks for the comment . I dont doubt as to who the inventor is.
Очень очень даже интересно узнать ваше мнение
Where's the link
good
хорошое видео
Sir plz make video of how to earn money in RUclips
He is an electronic RUclipsr, not a RUclips tutorial guy.