Thanks for the info. I have a Audi tdi. Diesel is leaking from somewhere below this thing. The mechanic said the vacuum pump have a leak. Just had to double check never heard of vacuum+feulpump in one.
Hello! Excellent video! Can you please tell if you removed from the car the DIESEL COOLER. I see you blocked 2 pipes coming from the fuel filter assembley. Do you have any adverse effects or any problems? Thank you very much!
Great video. I've bought a second hand pump and new seal kit which I can rebuild. It's a LUK pump. The part no. Ends in 'M' - I believe this fixes the vacuum joint as it's an upgraded design.
Hi , very great video, I would ask you, if the one way valve is not working can be fixed with the repair kit like the one on the video? or need a different part? Many thanks.
Congratulations ,very well explained,I learned well from your video and it solved the problem for me. Thank you very much and keep doing well to the people
Hi mate any advice please ive changed the gaskets to my vacuum pump and when I put it back together I have no vacuum to the actuator at all my esp light shows and my power assisted steering also my brake pedal is really hard
Hi there, Thanks for this super nice video! My pump is leaking very small amounts of diesel only when running. Engine works and starts fine. I want to replace the seals to stop this. Would it suffice to only remove the middle part (the part you hold in your hands at the 3:00) and cover plate, and keep the back part attached to the engine? Or is complete removal from the engine better or needed?
looks like my Touran pump. I have a loose Hose(pipe) joint too, I want to stick Epoxy ,it is not a risk that Epoxy Gers in the pump? As it s constructed looks really Sealed
hey, wonderful video. my pump is about to die, wanna try this repair. at 06:00 the grid filter. does it come with the kit? or you just put back the old one?
Are you sure you need to put the metal gasket over the rubber gasket? I ask because there are some differences between models, some models do not have channels for rubber gasket below the main cover so for this version is rigid gasket, so that is why the put rubber and rigid gaskets in the kits because of differences in versions.
Also it would be good tho show removal from the engine and putting it back, should there be aditional gasket between the wall of the engine and the pump?
I REMOVED OLD O-RINGS ,EXCEPT SPRINGS ,SEMERING AND WASHER OF SCREW NEAR FILTER.I PUT NEW SCREWS ,FIXED ON POSITION.STARTED ENGINE, DIESEL OIL LEAK FROM COVER OF FUEL PUMP (FIXED WITH 5 SCREWS).I REPLACED THE O-RINGS OF COVER AND I PUT THE ANOTHER GASKET FROM KIT,THE BLACK ONE.I FIXED ON ENGINE, AND AGAIN LEAKAGE ,SAME PLACE,FROM COVER WITHOUT START ENGINE, ONLY CONECTED ALL FUEL HOSES.I TOUCHED WITH FINGERS THE COVER AND I FOUND FUEL,,WIPE-OUT WITH ONE RAG,AFTER FEW MOMENTS AGAIN PUT FINGER BETWEEN COVER AND BODY PUMP,FOUND FUEL LEAK AGAIN.I INSPECTED THE COVER,PUMP BODY FOR ANY CRACK ,BUT I DID NOT FOUNS.WHY MY TANDEM PUMP STILL LEAK FUEL FROM COVER? IS POSIBLE THAT FUEL LEAK DUE TO OF NEW COVER SCREWS ARE LONGER THAN OLD COVER SCREWS?I DID NOT COMPARE YET THE LENGTH OF NEW SCREWS WITH OLD SCREWS.
Hi, Great video, I’ve bought the repair kit but I’m having trouble installing the little brown circle part it’s the one with the little springs inside it ! The old one was very hard to take out and now really stuck at this part any help would be much appreciated
To take out was using somthing like this Hook ebay.to/2HGH83K to insert new part used standart socket for wrench - with same outlet diameter as Seal - just pushed it inside (pay attention must be flat to insert it smoothly , also you can add little bit oil on surface to reduce friction
Bonsoir j'ai besoin urgence s'il vous plaît ma Voiture A4 B6 1.9TDI code moteur AVF année 2004 quand je veux freiner sa freiner pas correctement quand je veux freiner lentement comme n'importe quelle voiture elle ne freine pas correctement et je dois freiner la pédale de frein jusqu'en bas
Did you cut a flat screw driver slot with a dremel into the three screws that hold the top plate of the fuel pump? Mine did strip the torx slot at the first attempt :(
yes, the problem was solved by replacing the gaskets the symptom was after a long time ( few hours) the engine is off the pressure of the fuel fell down. if you not have leaks from tandem pump - there is also can be one way valve in the outlet line it is integrated into the tandem pump - if it is not keep pressure you will get same symptom before that I changed the input line one way valve - it did not help
Just stripped one down and re-fitted seals after mechanic found a fuel leak, thanks for the video - great stuff
Thank you man! You fixed my car. It took a long time to find this problem. And your video helped me to find it. 👍
Thanks for the info. I have a Audi tdi. Diesel is leaking from somewhere below this thing. The mechanic said the vacuum pump have a leak. Just had to double check never heard of vacuum+feulpump in one.
This pump is making vacuum for the breaks and also fuel goes thru it to the camshaft-injectors.
Hello! Excellent video! Can you please tell if you removed from the car the DIESEL COOLER. I see you blocked 2 pipes coming from the fuel filter assembley. Do you have any adverse effects or any problems? Thank you very much!
Great video. I've bought a second hand pump and new seal kit which I can rebuild. It's a LUK pump. The part no. Ends in 'M' - I believe this fixes the vacuum joint as it's an upgraded design.
Hi , very great video, I would ask you, if the one way valve is not working can be fixed with the repair kit like the one on the video? or need a different part?
Many thanks.
Congratulations ,very well explained,I learned well from your video and it solved the problem for me. Thank you very much and keep doing well to the people
take care, you put two gaskets at the pump cover (the green one and the black one) only one of the two is placed, depending on the pump model.
My pump finally stopped leaking after I put metal gasket too.
this is correct only one depending on model
Hi mate any advice please ive changed the gaskets to my vacuum pump and when I put it back together I have no vacuum to the actuator at all my esp light shows and my power assisted steering also my brake pedal is really hard
My vacuum hose connecting to this was lose so i had a loss of turbo pressure and i just added some silicone and that fixed it from the day after
That pump works for oil also or only for fuel? Thanks
Hi there, Thanks for this super nice video! My pump is leaking very small amounts of diesel only when running. Engine works and starts fine. I want to replace the seals to stop this. Would it suffice to only remove the middle part (the part you hold in your hands at the 3:00) and cover plate, and keep the back part attached to the engine? Or is complete removal from the engine better or needed?
Hi i think it's more be easy to take out pump and replace seal outside , if you disassemble cover also check your springs
@@EmilyRhn Thanks! Will do!
looks like my Touran pump. I have a loose Hose(pipe) joint too, I want to stick Epoxy ,it is not a risk that Epoxy Gers in the pump? As it s constructed looks really Sealed
hey, wonderful video. my pump is about to die, wanna try this repair. at 06:00 the grid filter. does it come with the kit? or you just put back the old one?
Hi just put old one. make check that it's clean
Скажите пожалуйста ,в каком году появились однолопостные вакуумные насосы на авто?
How did you diagnose a bad tandem pump for causing a hard start??
Are you sure you need to put the metal gasket over the rubber gasket?
I ask because there are some differences between models, some models do not have channels for rubber gasket below the main cover so for this version is rigid gasket, so that is why the put rubber and rigid gaskets in the kits because of differences in versions.
Also it would be good tho show removal from the engine and putting it back, should there be aditional gasket between the wall of the engine and the pump?
Hi. Great video. Do you know how tight should the screws be (internal and external) ??? are you aware of any specs??? thank you!!
Internal screw torque specifications are one of life’s mystery’s
@@Bakanelli the 3 blacks inside are one of the most powerful screws i ever seen
hi, my problem is with reassembling the pump. I can't mount it on the crankshaft. what's the method?
I REMOVED OLD O-RINGS ,EXCEPT SPRINGS ,SEMERING AND WASHER OF SCREW NEAR FILTER.I PUT NEW SCREWS ,FIXED ON POSITION.STARTED ENGINE, DIESEL OIL LEAK FROM COVER OF FUEL PUMP (FIXED WITH 5 SCREWS).I REPLACED THE O-RINGS OF COVER AND I PUT THE ANOTHER GASKET FROM KIT,THE BLACK ONE.I FIXED ON ENGINE, AND AGAIN LEAKAGE ,SAME PLACE,FROM COVER WITHOUT START ENGINE, ONLY CONECTED ALL FUEL HOSES.I TOUCHED WITH FINGERS THE COVER AND I FOUND FUEL,,WIPE-OUT WITH ONE RAG,AFTER FEW MOMENTS AGAIN PUT FINGER BETWEEN COVER AND BODY PUMP,FOUND FUEL LEAK AGAIN.I INSPECTED THE COVER,PUMP BODY FOR ANY CRACK ,BUT I DID NOT FOUNS.WHY MY TANDEM PUMP STILL LEAK FUEL FROM COVER?
IS POSIBLE THAT FUEL LEAK DUE TO OF NEW COVER SCREWS ARE LONGER THAN OLD COVER SCREWS?I DID NOT COMPARE YET THE LENGTH OF NEW SCREWS WITH OLD SCREWS.
Hi mate my passat start like yours when engine worm but when cold start straight maybe pump fold or something else thx
Hi, Great video, I’ve bought the repair kit but I’m having trouble installing the little brown circle part it’s the one with the little springs inside it ! The old one was very hard to take out and now really stuck at this part any help would be much appreciated
To take out was using somthing like this Hook ebay.to/2HGH83K
to insert new part used standart socket for wrench - with same outlet diameter as Seal - just pushed it inside (pay attention must be flat to insert it smoothly , also you can add little bit oil on surface to reduce friction
@@EmilyRhn Does the seal have to be all the way down? Do you remember which way round the seal goes?
Thanks friend, greetings from Spain
Thank you !
hi great video.quick question...after you put back the pump do you have to fill some diesel in the pipe attachment?
thank you for your reply
Hi . didn't fill there is an electric low pressure pump from the gas tank
Did you have to crank for long timr after replacing on first start? Or just cycle the key many times to prime the pump?
Bonsoir j'ai besoin urgence s'il vous plaît ma Voiture A4 B6 1.9TDI code moteur AVF année 2004 quand je veux freiner sa freiner pas correctement quand je veux freiner lentement comme n'importe quelle voiture elle ne freine pas correctement et je dois freiner la pédale de frein jusqu'en bas
Very good. Thanks.
Did you cut a flat screw driver slot with a dremel into the three screws that hold the top plate of the fuel pump? Mine did strip the torx slot at the first attempt :(
Hi
yes, cutted for flat screwdriver
Good job
solo se pone la junta de goma,la de chapa es si tu bomba lleva junta de chapa
Hi,did this solved the starting problem ? mine only leaks without making any starting issues
yes, the problem was solved by replacing the gaskets
the symptom was after a long time ( few hours) the engine is off the pressure of the fuel fell down.
if you not have leaks from tandem pump - there is also can be one way valve in the outlet line it is integrated into the tandem pump - if it is not keep pressure you will get same symptom
before that I changed the input line one way valve - it did not help
Hi
How did you fix the loose vacuum pipe?
Regards
TOM
previuse owner seems to be gluing with epoxy
There is a water hoe just below this tandem pump and that leaks coolant all the time. Anybody has a partnumber for that?
Did you remove coolant hoses away?
no. no needed
Very well 👏🏻👏🏻👏🏻
☆☆☆☆☆☆☆☆