I Build A SMOKER From An Old Compressor!
HTML-код
- Опубликовано: 23 июл 2024
- In this video I Build A Smoker From A 65 Year Old Compressor! I have wanted to an offset smoker for a while but they run 4-6k retail for the size i want, and when i found this compressor for $60 on Facebook Marketplace, i knew i had to build my own!
SUPPORT THE CHANNEL
MERCHANDISE - shop.johnmalecki.com/
SQUIRRELLY STICKS - bit.ly/JM_SquirrellyYT
PLANS - www.johnmalecki.com/digital-p...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
If you like this video check out these other welding projects!
ULTIMATE Fishing Kayak Trailer Build - • ULTIMATE Fishing Kayak...
We SHOOT A Desk With BULLET PROOF GLASS Built In! - • We SHOOT A Desk With B...
WORLDS FIRST Double Decker Desk Build! - • WORLDS FIRST Double De...
Another IMPOSSIBLE "FLOATING" Table Build That Almost BROKE! - • Another IMPOSSIBLE "FL...
If you love awesome content, you'll love these!
- 3 LEVELS of Adirondack Chairs -DIY to PRO Build : • 3 LEVELS of Adirondack...
- IMPOSSIBLE Floating "Cave" Table Build: • IMPOSSIBLE Floating "C...
- 5 EPOXY Tips I Wish I Knew As A Beginner!: • 5 EPOXY Tips I Wish I...
Proudly Supported By:
Woodcraft - bit.ly/JM2021_Woodcraft
Timberland PRO - bit.ly/JM_TimberlandPRO
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
BITS & BITS - bit.ly/JM-Bits CODE - MALECKI15 = 15% Off
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishes - kit.co/JohnMaleckiBuilds/fini...
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#OffsetSmoker #StickBurner #DIYSmoker 
Хобби
Its like watching a Lincoln commercial
I've got an old 100# propane tank that I've been thinking about making a grill out of. It'd only have about a foot of depth if I went with a horizontal design like that, but it'd have a solid 4' of grille length. I like the big tire idea, too. As a blacksmith, I'd have to add some decorative scrolls and the like, but that'd be half the fun.
Great build, the only thing I would improve is that I don't think the steering will hold up over time.
If you ad two 8" discs between the upper and lower part. As long as you are going straight there wont be a problem but if you make sharp turns there will be a lot of bending force on one small bolt and some square tubing.
7:47 “I just think it should be on the right” 😂 same! Idk why smokers with the fire box on the left bothers me so bad. It’s backwards!
Looks great! IF you have a problem with the grates being too hot near the fire box, you might consider a heat deflector under that part of the grates.
Great looking pit!! thanx for the shoutout!
Awesome build! Loved this one. I enjoy the metal fab stuff along with the woodworking.
Squirrely AF! Love it.
Nice! I got an old water heater tank that I turned into a smoker. Looks similar to this.
Nice job! I like that you left the history and the "patina" in place
Love me some Chud’s BBQ and Aaron Franklin! Throwing lots of love to these Austin, TX boys! Great pit.
Two firsts: first time watching your channel, and first time I laughed watching an overweight man dance. Nice build and nice pace to the vid. Thanks. Subbed.
Dammit Jordan......GREAT JOB!! Oh, you too John. Oh, and Sam the Cam Man too.
Might be time for a hoist and gantry setup............and hard hats.
Ridiculously overbuilt, oversized, and every other over______ word I can think of and... it's just so damn beautiful 😍 🤩🤯
It's a 97 on a scale of 1-10 and on the squirrelmometer hits all the way to level... 'MERICA!!🇺🇲
Awesome job 👏 👌💯👍
Awesome job. Only thing I would have done different is make a better pivot for the front axle. Wouldn’t be too much more work but would be a lot stronger
Elite craftsmanship, great work
“Make lumber prices cheap again” has got to be my favorite of your merch so far even though 2x4 are almost back down to what they used to be
My favorite woodworking channel gives a shoutout to my favorite bbq channel (Chud). Gonna be a good day.
Looks awesome!!
Damnit Jordan, Ribs and a White Shirt? I'd look like a victim from Friday the 13th after a few ribs. lol
Came down to say it! What a mad lad!
I lived in Conshohocken (Conshy), it outside of Philly. Cool PA history right there!!
love it turned out very smokin hot. Keep up the great craftsmanship and hard work my friends. Design on. Fab on. Weld on. Keep making. God bless. Stay squirrely.
Good video glad to see something new !!!
Awesome video. Keep going. Inspirational.
Very nice! There are a few things I would do differently. Also, I won’t pay anyone money for a repurposed tank smoker, but I will definitely build one with all the online help! Great job!
This is my favorite! You guys rocked it! Sam we missed you.
You guys have made some awesome stuff on this channel but this might be the coolest project yet
so awesome
Awesome grill build....even better Welding Shield.
Now that is beauty!
Man ! That is a gift from God, just to be able to build like that. 👊🏾✌🏾🙏🏾
When you fire her up, do yourself a favor and leave the smoke stack wide open! That is just a weather cover, regulate the airflow at the firebox side only. Nice job!
I must have watched this video like 4 or 5 times now. So entertaining! I need to start watching more of your stuff.
Welding wire, sparks and BBC sauce. Perfect recipe.
Lol.
Everything about this is awesome. That being said, the engineer in me says you should take a look at your swivel point where the wheels turn. Everything is beefy except that single bolt you have, and it will see quite a bit of bending load if you are moving the pit and hit against a curb or bump. I'd hate to see that beautiful piece of art take a nose-dive onto someone's foot. FYI, I have an air tank that I bought for almost exactly this build and I intend to "borrow" a bunch of your ideas...
I don't hear "y'uns" very often. Good people 'round there...
I agree! Did a fantastic job on the smoker but a few upgrades would have it solid as a rock. Definitely need a bushing welded into that square tubing and a matching machined pin with a grease zerk or that thin wall square tubing will eventually wear and make it a pain to steer and move around. At the minimum if the bolt is kept I recommend welding the nut onto it. Constant vibration and turning motions will cause it to come loose and end badly. A thrust bearing on the swiveling surface would be an added plus!
I own the vertical twin of this. Same size and color. Also slated for a smoker or space capsule. I haven't decided.
Looks great .
Another Great Build Guys!
That thing is massive! It was funny watching you trying to push it around the shop. Jordan killed it on the CNC 🔥
That’s a cool smoker. The fire department on on we did a poker shoulder smoke back in may we smoked 500 shoulders using old propane tanks.
One of the best ways we found to get a straight line on the round tank was using a laser level. Love this build!!
And yes they are huge smokers lol
awesome!
This is amazing.
And now I’m checking Facebook market for an old tank.
why you can build old oil barrel or gas tank ot many same cheap smoker, cost about20-50$ all tras yard parts and weld together thats it.
I love these guys, work and fun in one. should weld temp handle to lift the tank around.
Looks great 👍
Nice jimmy diresta did something very similar a few months ago and it's a gigantic amount of smoking room, looks awesome my dude.
Fantastic work, guys! Nicely done! 😃
I just don't know if I would have a big enough garage for that thing! 😂
Anyway, stay safe there with your families! 🖖😊
Love this video. Thanks for posting 👍
Looks great. My father did something similar with an old fuel barrel. We use it for family events. Only suggestion I would make is to the grill plates with a straight direction metal. We used the expanded metal as well and after multiple uses the diamond shape starts making it harder to pull the meat off
Can we have more vids where Sam isn’t there and Jordan has to save the day? Your guys dynamic is hilarious. (Sorry Sam, we still love you)
Hell yea! This was awesome dudes
Love it!
WHY haven't I found your channel sooner??!!! Awesome stuff
Oh man this is soooo cool!!!! 👏🏻👏🏻🔥🔥
This was a sick build!!!!!!!
Did you use a Thrust Bearing to hold the steering in place. If your not sure what I'm talking about, look up Thrust Bearing and you will come across a bearing that looks like a washer. You would need 2 of them to work. one on top and one in between the 2 beams.
Looks really good man. Great job ! I’m getting ready to build my own as well, Is there anyway you can give me the dimensions on what steel you used for everything. I currently have the tank and pipe that I’m going to use as the stack. Just unsure about how thick I need to go with everything else.
Who needs a Yoder anyhow, all you need is a fully outfitted fab shop lol
Big toys for big boys, 👍 nice job.
Great job fixing and re-tacking the hinges. 😏
I live one town over from Conshohocken! SE PA. It was a big steel town back in the day, now it's a lot of hipsters
That is a beautiful beast
I grew up in Conshohocken, PA! it's just outside of Philly.
The Dammit Jordan shirts are gold
Jordan gets the CNC cred! (I envy Jordan and the CNC shop).
Effing beautiful blue!!!
Great job 👍
Nice job
Wow, not a single 'Damn it, Jordan' (other than your shirt) the whole vid. I like the camaraderie you show which is probably the norm in your shop. Nice videography, Sam. That was a very nice smoker. Nicely done, John & Jordan.
I actually shot this video 📹
@@jordanheider2662 Way to go, Jordan. You did awesome. All the way around!
Loved the Chuds BBQ shout out. Bradley is the best.
Nice I am about to start on one as soon as I find a tank
Can I swear??? That was Mother Trucken Awesome 👏 guys !!!
Love your stuff man.
Do you need some kind of safety catch to prevent the lid slamming on a hand or finger when the lid is opened?
Very cool.
This is my new favorite RUclips Channel. The content is great. The editing and production take it over the top. Glad I found *yinz (that hurts to type as a Bengals fan!).
Dammit Jordan that is sweet!
that’s badass
I'm literally doing this right now with a Kellogg Air Compressor!
Awesome job!:)
Yinz this is badass
Conshohocken is right outside of Philly. Very cool town and everyone is very friendly
John add a thermometer at the hot box end, and a drip can at the low end.
Well, that was slightly above average.. Great work !
sick build
Good job boys
Thing looks sick
Great build. I'm currently building a large santa maria grill with a brazero on it. Where did yall get yalls spindles for the tires. Thanks.
I have never seen anything so over engineered and overbuilt in my life... I love it.
That's amazing that your ribs come off the smoker precut!
I wish I’d have seen this sooner! I likely would have asked if you’d want to build another for a fellow yinzer! Wel, technically I’m about an hour north of ya, but just ordered a workhorse 1975T, but would have much rather supported a local business had I known. Either way, great work, and great vid!
Next episode mounting a 5HP motor to it?!?!?
I live close to Conshohocken, PA so that's pretty awesome
Nice Shoutout to Chud, I love that guy!!!!!
Love the build fellas, awesome job!! Love Jocko as well. I’d be the same when talking with him lol. If you’re going to build something for Jocko then you have to do Goggins!!
Have the rear axle have a go kart sprocket and chain to electric motor. Run a two postion switch up to the handle with a kill switch. Have a small battery powering it. Makes it super easy to move.
Eating ribs....with a white hoodie on. Oh boy Jordan. Given how much metal you guys put in that thing you should have installed an electric motor in it.
Jordan realy wanted to hahah
Motor and a seat so you cans drive it
For simple straight lines, use a cross line laser.
Yes👍
Bout time you give Jordan some kudos.
When the background applause kicks in…I was standing and applauding. When from behind me she says “wtf are you doing”. In all fairness, I was wearing a t-shirt (2 sizes too small)…that’s it. So it must of looked strange.
Love the channel, love the energy. My time is valuable to me and I entrust a chunk of my free time(which is usually 4 hours between 5am and 9am) to you!