2010 Ford Crown Vic P7B LED fog driving lights

Поделиться
HTML-код
  • Опубликовано: 18 сен 2024

Комментарии • 39

  • @PanzerPlatform
    @PanzerPlatform 4 года назад +12

    You're obsesed with LED lighting.
    I mean that in a good way.

  • @stwhite5135
    @stwhite5135 4 года назад +3

    I appreciate your closeup camera work under the bumper showing the mounting brackets.

  • @09tahoeppv
    @09tahoeppv 4 года назад +1

    Great video bro showing how to do good installs

  • @darkwhitedirewolf
    @darkwhitedirewolf 4 года назад +3

    Thanks, will do this with Merc

  • @kingkumul9386
    @kingkumul9386 3 года назад +1

    I have the same car mine is CNG 2002 the same spot you put yours I put a 55-in white LED bar on my hood I have a 35-in white

  • @dougkahle5430
    @dougkahle5430 4 года назад

    Hey WJ, can't get enough of these great videos! Please tell me (again lol), where are you picking up the accessory power (key on/key off), on this 2010?Thank you!

    • @WJHandyDad
      @WJHandyDad  4 года назад

      there is a police power connector under the glove box area... it is shown in great detail in my keyless entry video from last week

  • @kmorton54
    @kmorton54 4 года назад +1

    How are the LED headlamp bulbs working out? Also have you every had to adjust the headlamps? I would appreciate a reply. Excellent video 😁👍

    • @WJHandyDad
      @WJHandyDad  4 года назад +2

      my 2010 just has regular headlight bulbs. I haven't driven at night yet since I installed the fogs - but they look like they should do a great job. My 2008 has LED headlights and fog lights and it's significantly better night vision just having the headlights even without the fogs

  • @richpitt873
    @richpitt873 2 года назад +1

    I just used the stock wiring and the stock fog light switch for mine. No wiring, no relay, no new switch.

    • @WJHandyDad
      @WJHandyDad  2 года назад

      I assume they all have the wiring since Ford seemed to put the wiring for everything else. Do you have a civilian model or did you get a different headlight switch, because neither of mine has a fog light switch on it.

  • @austinh506
    @austinh506 4 года назад +1

    Awesome video! I had always wanted fog lights, but i never was a fan of how out of place they looked in the bumper. Saw posts about people using ford focus fog lights but wasnt pleased with how those looked either. Eventually found some housings off a junkyard vehicle that fit the bumper perfectly, yes i needed to trim off a bumper fin or two but it was definately worth it.

  • @stevep756
    @stevep756 2 года назад +1

    How much of an improvement did they make at night? Steve

    • @WJHandyDad
      @WJHandyDad  2 года назад

      very happy with them... best I've ever installed on a vehicle

  • @57fire
    @57fire 3 года назад +1

    I know this was done a while ago but has anyone thought of using a newer crown vic or grand marquis headlight switch with the fog light wire to make a factory look?

    • @WJHandyDad
      @WJHandyDad  3 года назад

      that should work - my concern would be that you might have to run your wires from the LCM though

  • @stwhite5135
    @stwhite5135 4 года назад +1

    Got these in 6 inch for my Grand Marquis. Couldn't you just splice these into your headlight wires so they would be on when your headlights are on?

    • @WJHandyDad
      @WJHandyDad  4 года назад

      Great question - hypothetically you could run them direct from the headlights, but for best safety and performance, they should have their own power source even if they are triggered via relay from the headlight power. Hope that helps.

  • @krownvikkhris3004
    @krownvikkhris3004 3 года назад

    What size lights would I need to go in the opening closet the end on each side of the bumper? I have a 2006 P71

  • @brad6779
    @brad6779 4 года назад +2

    Lol I put LEDs in the headlights and a 40" lightbar in the bumper....

  • @PanzerPlatform
    @PanzerPlatform 4 года назад

    You just gave me another idea.
    I wonder if I can install these on the bottom of my rear bumper some how, and run the positive wire into the factory positive wire for the reverse lights.
    That way, they would only come on when I put the transmission into reverse.
    I wonder what the fuse rating is for the factory reverse light circuit, and if it can handle the extra load?
    Did you by any chance check the current draw of these new fog lights?
    "Why do I need so much light when backing up?"
    Because I like to see. lol
    -Chuck

    • @WJHandyDad
      @WJHandyDad  4 года назад +3

      I've thought about adding some auxiliary reverse lights too since a lot of us have that "police tint" in the rear window. If I were doing it, I'd use that 50amp power in the trunk through a relay that is triggered by the reverse lights, rather than trying to split the reverse light power. That way you'll have plenty of power, no need to run that much wiring, and no risk to the reverse lights themselves.

    • @PanzerPlatform
      @PanzerPlatform 4 года назад

      Hmmm...
      Thanks Gary.

  • @LuminousSapien
    @LuminousSapien 3 года назад

    On the switch, where do the orange and grey wires go?

    • @WJHandyDad
      @WJHandyDad  3 года назад +1

      I ran 3 wires, white, orange, and grey as outputs so that I could expand in the future without running more wires. I don't remember which is which, but one is for the fog light relay, one is for the camera relay, and one remains unused but there ready for duty if I ever add another accessory

  • @kevinhitchcock7062
    @kevinhitchcock7062 4 года назад +1

    Do they come as a set or a single light.

    • @WJHandyDad
      @WJHandyDad  4 года назад +2

      they are a set of 2 lights and mounting brackets

    • @kevinhitchcock7062
      @kevinhitchcock7062 4 года назад

      I have an 08 Grand Marquis. The 7 in lights will not fit in my bumper. I need 6 in lights. Also what wattage lights are the best. Are yours 816 watts. I want the brightest available. Thanks.

    • @WJHandyDad
      @WJHandyDad  4 года назад

      get on Amazon and eBay and search, there are so many options nowadays and a wide range of prices

  • @timmallon9458
    @timmallon9458 4 года назад

    Looks like the link to the light is broken... What was the model / brand for the light???

    • @WJHandyDad
      @WJHandyDad  4 года назад +1

      Looks like they are sold out... try these instead: amzn.to/2qrxKxu

  • @kennywarren2317
    @kennywarren2317 3 года назад +1

    Where did you get the adjustable foot pedal button

    • @WJHandyDad
      @WJHandyDad  3 года назад +1

      came with the car - it has adjustable pedals

    • @kennywarren2317
      @kennywarren2317 3 года назад

      @@WJHandyDad can I buy the part for my 06 Vic ?

    • @WJHandyDad
      @WJHandyDad  3 года назад +1

      @@kennywarren2317 you can retrofit your car, but it will take more than just the button if that's what you're asking.

    • @kennywarren2317
      @kennywarren2317 3 года назад +1

      @@WJHandyDad yes that’s what I’m asking I like how you work on your car

    • @WJHandyDad
      @WJHandyDad  3 года назад

      @@kennywarren2317 I haven't done an adjustable pedal conversion. It's not something I really need. My 2008 doesn't have it (nor did my 2003) and I never needed it. My 2010 I've never adjusted. And my wife wouldn't drive my Vic if I paid her LOL