Happy Tuesday! Trying to mix things up so this time we throw in the puppy cam and some more relaxing music on this particular install :) PS - I didn't notice till after that I didn't have the right camera settings on so some parts are overexposed
YES! Her pc stuff videos are great, always looking forward to these. Informative, relaxing, and done so differently than other channels in a really nice way
I did this same install at the beginning of December. It's such a nice card and Water block. It was such a pain for me to get the front block and back plate block lined up, mine was missing a stand off. Turned out alright in the end though. Enjoy all the games at 4k 120hz!
Love the new format to the mod videos!! Commented on the previous water cooled asmr video and you actually listened!! Definitely gained a Patreon for this
I FEEL you on those thermal pads! I was trying to also record my first YT video and it took everything in me to not yell expletives the whole time haha. The EK instructional video def installed them differently than their manual.
Hi Sarah, I'm from Germany, my first video from you was "Horizon Zero Dawn", in which your style had charmed me, and subscribed to you immediately. Since then a while has passed, and I have seen many "lets plays" and other videos from you in this time. This video here is a recent one, so I can write a little comment and I'm glad to see you again. Your PC and tech videos are great and you are so relaxed about it, so it's fun to watch you. Kind regards from Germany
Felt your pain during the protective plastic cover removal 😅 but you’re really good at this!!! My dad builds my computers and I got him watching your pc build uploads now
haha, yeah it took a while and I got impatient lol. Awww that's so nice, tell your dad I say hello! Maybe one day I can do a collab video with your dad haha
It may be a good idea but tbh you really don't need to if you don't have time. Unless you are worried about that 1% chance. DOA rate is actually more likely less than .5%. Never in my whole life have I ever had a DOA FE card. FE warranty still good with the block they confirmed this.
I'll be doing a similar procedure on my 4090 FE with a similar waterblock fairly soon. I've got the EK Quantum Vector2 waterblock, but without the active backplate. So, some of the installation procedures are a little different judging from the instructions that the EKWB manual provides. However, it's close enough that your video is a good real world example on how it's done. I've still got parts to buy to complete my build so it'll be a bit of time before it is time for me to build, but once that day arrives I'll be keeping your video open for side reference. Also, unboxing and seeing the card for the first time in person and in my hands had me second guessing putting a waterblock on it, because damn the stock heatsink array actually looks quite nice aesthetically. But I've already committed to water cooling it and it must be done.
Oh finally!! Adorable computer enthusiast!! 🥰 I'm just too tired and bored watching beard and fat type of guy doing computer stuff, i (and most probably most of us) need people like you more in this industry 😁🥰
Great stuff! You work on these like you have been in computer tech for years. 😁👍My new pc parts will be here in little over a week, ordered all except the 4090, I can't seem to find this version of the it anywhere over here. I myself will not be going for water cooled GPU, so maybe I'll go with Asus, like most of my other parts are. I'll use my GTX780 until I get the 4090 Can't wait to get back into video editing and some more high quality games. Looking forward to see your build completed!
that was awesome to see, but alot of thermal pads went on OMG can not wait to see what it looks like after you rebuild your entertaiment PC using the RTX 4090
Just came across your channel. You have some really awesome videos. Very impressive attention to detail. Do you have a list of the tools and products you like to use? That Alphacool mat is sweet. 👍🏼👍🏼
Welcome to and thanks for stopping by! On most of my PC related videos I do try to list things in the descriptions. Except this one lol, I forgot but will add now.. This is the modmat, I really like it: amzn.to/3RB7J6D It also has connections for anti static bracelets. Instead of bracelets, I prefer to I use an anti static grounding mat at my feet.
I have a 4090 Suprim X but after doing the Vector 2 the temp was .. hotter. Guess my fans in the case cooled all that suprim x metals :/ the waterblock was a gift so had to do it
@@SnaxanGaming you have taught me so well I am considering of building one in the near future I have the same tower case as you. Not only smart and resourceful but you are really pretty. Are you single?
Hey I officially ordered my EK parts, full on triple radiator two p’s and an X , 4090 abp block, am5 velocity 2, quantum 2 distro plate for o11xl. Big difference from yours is my fans I went with Lian li sl-inf fans, white case, 16mm tubing, and the newer distro. Now the painful 3-4 month wait for shipping. Still waiting on new 7000x3d to drop anyway. Any mobo recommendations that will fit our thick 4090 water block for am5? I was looking at a white x670 Asus strix but not sure if it will fit.
Good luck on the build! I don't know which boards have this issue, but the thing to look out for is making sure that the 4090 backplate doesn't interfere with the heatsinks, on some boards the card doesn't get seated all the way because of that. Also I remember there were some boards that have the RAM slots a little too low also, getting in the way of the backplate. A way around these issues is to mount vertically, but that has its own issues to check for. Doesn't matter if it's intel or AM5, and the case pretty fits almost any board. I'll be updated my o11 with a different card and AM5 too :) The 4090 in this video will be going inside an EVO. BTW, the Strix board you mention has ram clearance, but just make sure to check the measurements on that m.2 ssd heatsink above the slot! :)
damn... I remember borrowing my works cleanroom had a mask/gloves on when I put a waterblock on a 4080. no way would i risk any performance drops for dust or FOB on the die on a card thats 1K+.
What’s the motherboard? Watch the extra clearance needed for that active back plate. I have an Asus z790 hero and it won’t fully seat due to the board’s integrated nvme heatsink. After scanning through MSI, Gigabyte, and Asus, it may be a more common problem in their higher end boards due to those nvme heatsinks above the GPU pci-e slot.
I modded a few things to make things fit but it's going to be mounted upright in reverse anyway so clearance ended up being ok :) Ended up with unify x board in an Evo.
@@SnaxanGaming So you flipped the Evo? Where’d you put the radiators? I’m setting mine up in an Evo also. I’ve been set on top and bottom rads with side fans as intake, and using a front distro plate. Debating moving to top and side rads with bottom intake fans so I can vertical mount the GPU, but I’m a tad concerned about it being too heavy that way, and for side rad hot air to stay in the back compartment.
@@grit5941 I was able to fit 2 60mm rads both in push pull configuration top and bottom. Custom side distro with front fans. I had to mod the case a little but everything ended up fitting. Looking forward to finish things and edit/upload the video.
It's happened to me once or twice but it was easy to quickly figure out the source of with a leak tester. Both times were just the port plugs not tightened or inserted
@SnaxanGaming that's an issue I'm running into with my 4090 block. I've tightened everything, ensured the terminal O-rings are in place, reapplied new thermal pads, and all of which have been to no avail. I opened a support ticket as I've exhausted my ideas.
@@TheAshenPhoenix How do you know that it is not holding pressure? Are you using a leak tester? If so for how long are you testing it for and how far does the pressure drop? A small drop in pressure could be normal after 15 minutes.
I'm curious as to how much it weighs now, I'm going to have mine in a vertical mount in my server case (so it's gonna be parallel with the desk). And I don't want it to sag onto the m.2 heatsink
I have a build very similar to yours. I upgraded from 3080 to 4090 and used same block as you. When I went to boot system I got no signal and didn't know what the problem was. Turns out as I was using a PCIEx3 extension cable rather than PCIEx4 I had to change BIOS specifically to PCIEx3 otherwise it defaults to x4 and caused no video signal. This was a total pain to troubleshoot, draining loop ect. Just a heads up !
meanwhile I'm still rocking my 1080ti lol, this looks ridiculous big.. You have to show some game running on this HW, not having ESD wrist band is ballsy
The length isn't too bad but it's really wide! I'll do some benchmarks when it's in. ps I have a grounding mat that makes me feel a little better about it
Tough to say as there's too many variables on the other components and what kind of system you want :) At that price range I wouldn't pay more than $5-$700 for a gpu though, so that helps narrows things down. Maybe wait to see how good the new lower to mid AMD cards or the 4060 will be, or find a good deal on a 3000 series. GPU market is kind of stupid right now with the prices 😅 If you're in the LA area I can build you a decent one for that price.
@@SnaxanGaming Yo, thank you for this great response. I'm in no hurry and will take your advice and wait. Also am located in Germany which is as far as i know not in the LA area. 😄
@@benjithecat1294 lol yes Germany is a little far. Also if you are just aircooling or doing aio, you have a little more to spend on the gpu. Anyway good luck!
Story time: I'm down $3,700 and a 4090 just from it sliding out of the box and breaking on the floor. Ngl I was inspecting the box like a 6 year old does with a Christmas present
@@SnaxanGaming Unfortunately yeah it's broken. I had pulled apart the graphics card to have a look and some of the pins on the 4090 have been scratched. I tried booting it up and it kept saying no signal received. So I feel like its a video input issue with the card. Can only cry over spilled milk for so long haha
the only thing that bugs me is the cat being on the counter as she takes this thing apart. the static in cat hair just scares the fuck outta me that something will go wrong. happy it didnt though
Found out last day that if I want to use the Asus Z790 formula with this ABP version, I am screwed :( There isn't enough clearance (15 mm) from the screen/m.2 cooler. Is it really worth buying ABP instead of the "passive" backplate version of this cooler?
@@SnaxanGaming I wouldn't say smart hahaha, just that I find it not necessary to jump to another graphics card if my current one can still keep going. 😅
![How to Install EKWB EK-Quantum Vector² Trio RTX 4090 GPU Water Block [Tutorial]](/img/1.gif)
Happy Tuesday! Trying to mix things up so this time we throw in the puppy cam and some more relaxing music on this particular install :) PS - I didn't notice till after that I didn't have the right camera settings on so some parts are overexposed
You’re very Beautiful! ♥️
The assistants were great!
Thank you for this video! I am late to the party but going to watercool my 4090FE so exactly what I needed!
@@bdkbdk8005 Have fun!
YES! Her pc stuff videos are great, always looking forward to these. Informative, relaxing, and done so differently than other channels in a really nice way
Thank you, appreciate the support, happy you like them
As always, impressed with the amount of effort and attention to detail you put into your mods. Can't wait to see the finished build!
Thanks! And me too, it's taking forever but this is pretty much one of the last pieces :)
Love what you do Gal! We need more of YOU in this world!!!
Really enjoyed all of the fun music on this. Excellent detailed presentation of the process as well, thank you.
I did this same install at the beginning of December. It's such a nice card and Water block. It was such a pain for me to get the front block and back plate block lined up, mine was missing a stand off. Turned out alright in the end though. Enjoy all the games at 4k 120hz!
Nice! Glad to hear it's working out for you! Can't wait to get done with the rest
This is the most detailed--and best shot (angles and dogs are A+++)--video I've seen so far for a 4090 breakdown. Thank you! Very pro work!
thanks for watching! Also anyone who loves doggos is a winner in my book :) Will be doing more PC stuff on the channel
There’s something about these videos they are so relaxing and peaceful, nice one Sarah
Must be the smooth jazz in the background.
Cheers and congrats on the up grade. I added an active front/back plate to my 3090 and love it. The thing is a beasty. Keep up the content!~!
I love all your videos. They feel so relaxed like we're hanging out with a friend.
Love the new format to the mod videos!! Commented on the previous water cooled asmr video and you actually listened!! Definitely gained a Patreon for this
me and my puppy enjoyed watching your video. he slept off in between , he really tried to stick through the end
lol that's good to hear thanks for letting me know :)
Princess pawing at the screws was hilarious, lol.
Nice build. My next upgrade, I've been planning to use EK waterocks for gpu and cpu.
Can't wait to see you finishing the build. Lalo na ung part where you will design and install the tubes. 👊
I FEEL you on those thermal pads! I was trying to also record my first YT video and it took everything in me to not yell expletives the whole time haha. The EK instructional video def installed them differently than their manual.
Right??!
I love the subtitles you did for Billie.
Hi Sarah, I'm from Germany, my first video from you was "Horizon Zero Dawn", in which your style had charmed me, and subscribed to you immediately. Since then a while has passed, and I have seen many "lets plays" and other videos from you in this time. This video here is a recent one, so I can write a little comment and I'm glad to see you again. Your PC and tech videos are great and you are so relaxed about it, so it's fun to watch you. Kind regards from Germany
Welcome back! Glad to see you stop by. Thanks for the comment I appreciate it! Hope everything is going well for you in Germany. Have a great week
Best unintentional ASMR.
I literally just did my 4090 yeterday but with the acrylic water block. The performance is amazing!
Congrats! Can't wait to see how well it does
Felt your pain during the protective plastic cover removal 😅 but you’re really good at this!!! My dad builds my computers and I got him watching your pc build uploads now
haha, yeah it took a while and I got impatient lol. Awww that's so nice, tell your dad I say hello! Maybe one day I can do a collab video with your dad haha
Great job I love your pc build videos
Daammm this block is massive
Always test the card first before installing any waterblock
It may be a good idea but tbh you really don't need to if you don't have time. Unless you are worried about that 1% chance. DOA rate is actually more likely less than .5%. Never in my whole life have I ever had a DOA FE card. FE warranty still good with the block they confirmed this.
Amazing ❤
Looks like a seal point ragdoll cat, beautiful
You are the reason I water blocked my own PC. xD
As usual you made the best disassembly video. Really love these PC videos. They’re inspiring my niece to try building her own pc.
wow mapapa sana all ka na lang talaga!
I'll be doing a similar procedure on my 4090 FE with a similar waterblock fairly soon. I've got the EK Quantum Vector2 waterblock, but without the active backplate. So, some of the installation procedures are a little different judging from the instructions that the EKWB manual provides. However, it's close enough that your video is a good real world example on how it's done. I've still got parts to buy to complete my build so it'll be a bit of time before it is time for me to build, but once that day arrives I'll be keeping your video open for side reference.
Also, unboxing and seeing the card for the first time in person and in my hands had me second guessing putting a waterblock on it, because damn the stock heatsink array actually looks quite nice aesthetically. But I've already committed to water cooling it and it must be done.
The stock cooler really is very pretty. good luck on your build!
Oh finally!! Adorable computer enthusiast!! 🥰 I'm just too tired and bored watching beard and fat type of guy doing computer stuff, i (and most probably most of us) need people like you more in this industry 😁🥰
Appreciate the support thank you!
Great stuff! You work on these like you have been in computer tech for years. 😁👍My new pc parts will be here in little over a week, ordered all except the 4090, I can't seem to find this version of the it anywhere over here. I myself will not be going for water cooled GPU, so maybe I'll go with Asus, like most of my other parts are. I'll use my GTX780 until I get the 4090 Can't wait to get back into video editing and some more high quality games. Looking forward to see your build completed!
They are still hard to find everywhere. And prices are so high too. Good luck on your new PC, hopefully you will get the GPU soon :)
i love what you do
Good to see sahra mechanics again
My cat actually sneaking to use my computer when Im in the toilet
wow this is so good, i cant wait to see the full build, Soon i can buy my very own 1st ever gpu.hehe
Love that "anak ng tipaklong" ice breaker 😅 can't wait for your Kratos PC build 😊
that was awesome to see, but alot of thermal pads went on OMG can not wait to see what it looks like after you rebuild your entertaiment PC using the RTX 4090
This is awesome!
very impressive upload great work
Looks good 👍
The part when you yelled when you were getting the thermal pads on the activate back plate was funny lol. Definitely time consuming and need patience.
Very well done, keep it up
Wow... looking nice that graphic card 🖤🖤🖤
It really is, looking forward to putting it in
Woaw Sarah!!! You're so lucky to have that graphics card!!! Keep up the good work with this kind of content. ❤❤❤
Thanks for the support!
Cool very nice good job
dear~ pro video-work-
Thank you!
Sheeeeesh!
I love watching you doing your stuffs ❤️
Should always test 1st before swapping...
Nice Snax. I'll just be slumming over here with my 3080 air cooled. lol
A lot less maintenance! Like anything in life, pros and cons with anything :)
damn, i give you props. i personally would never do this to a potentially over $2k gpu bec im a wuss and probably mess it up lol.
How do I plug in the watercooling?
Just came across your channel. You have some really awesome videos. Very impressive attention to detail. Do you have a list of the tools and products you like to use? That Alphacool mat is sweet. 👍🏼👍🏼
Welcome to and thanks for stopping by! On most of my PC related videos I do try to list things in the descriptions. Except this one lol, I forgot but will add now.. This is the modmat, I really like it: amzn.to/3RB7J6D It also has connections for anti static bracelets. Instead of bracelets, I prefer to I use an anti static grounding mat at my feet.
Wow... just wow...
"this stock cooler is really beautiful, so lets rip it off" LMAO
All included; how much money?
My tech girl ♥️
I have a 4090 Suprim X but after doing the Vector 2 the temp was .. hotter. Guess my fans in the case cooled all that suprim x metals :/ the waterblock was a gift so had to do it
hmmm....that shouldn't happen. There has to be something not making good contact in the block or something else going on in the loop.
@10:06 Are you telling me that is the video card?. The stock cooler is so bulky its smaller if you water cool it then. I learned something today.
Crazy right?
@@SnaxanGaming you responded. 😍
@@SnaxanGaming you have taught me so well I am considering of building one in the near future I have the same tower case as you. Not only smart and resourceful but you are really pretty. Are you single?
Very Nice! My allergies would go apesh*t in that room tho! loll they're adorable
Ms Snaxan, do you use any threadripper or xeon cpus in your personal or video
Editing systems
impresionante, buen trabajo.
Thank you!
Hey I officially ordered my EK parts, full on triple radiator two p’s and an X , 4090 abp block, am5 velocity 2, quantum 2 distro plate for o11xl. Big difference from yours is my fans I went with Lian li sl-inf fans, white case, 16mm tubing, and the newer distro. Now the painful 3-4 month wait for shipping. Still waiting on new 7000x3d to drop anyway. Any mobo recommendations that will fit our thick 4090 water block for am5? I was looking at a white x670 Asus strix but not sure if it will fit.
Good luck on the build! I don't know which boards have this issue, but the thing to look out for is making sure that the 4090 backplate doesn't interfere with the heatsinks, on some boards the card doesn't get seated all the way because of that. Also I remember there were some boards that have the RAM slots a little too low also, getting in the way of the backplate. A way around these issues is to mount vertically, but that has its own issues to check for. Doesn't matter if it's intel or AM5, and the case pretty fits almost any board. I'll be updated my o11 with a different card and AM5 too :) The 4090 in this video will be going inside an EVO. BTW, the Strix board you mention has ram clearance, but just make sure to check the measurements on that m.2 ssd heatsink above the slot! :)
damn... I remember borrowing my works cleanroom had a mask/gloves on when I put a waterblock on a 4080.
no way would i risk any performance drops for dust or FOB on the die on a card thats 1K+.
PC's and doggies?? You had my curiosity but now you have my attention.
Can’t beat that combo!
What’s the motherboard? Watch the extra clearance needed for that active back plate. I have an Asus z790 hero and it won’t fully seat due to the board’s integrated nvme heatsink.
After scanning through MSI, Gigabyte, and Asus, it may be a more common problem in their higher end boards due to those nvme heatsinks above the GPU pci-e slot.
I modded a few things to make things fit but it's going to be mounted upright in reverse anyway so clearance ended up being ok :) Ended up with unify x board in an Evo.
@@SnaxanGaming So you flipped the Evo? Where’d you put the radiators?
I’m setting mine up in an Evo also. I’ve been set on top and bottom rads with side fans as intake, and using a front distro plate. Debating moving to top and side rads with bottom intake fans so I can vertical mount the GPU, but I’m a tad concerned about it being too heavy that way, and for side rad hot air to stay in the back compartment.
@@grit5941 I was able to fit 2 60mm rads both in push pull configuration top and bottom. Custom side distro with front fans. I had to mod the case a little but everything ended up fitting. Looking forward to finish things and edit/upload the video.
I wouldn't recommend using latex gloves when handling electronic parts as it is widely known that they conduct static electricity.
They are nitrile so it should be fine
Have you ever encountered an issue with the waterblock not holding pressure after the assembly is completed?
It's happened to me once or twice but it was easy to quickly figure out the source of with a leak tester. Both times were just the port plugs not tightened or inserted
@SnaxanGaming that's an issue I'm running into with my 4090 block. I've tightened everything, ensured the terminal O-rings are in place, reapplied new thermal pads, and all of which have been to no avail. I opened a support ticket as I've exhausted my ideas.
@@TheAshenPhoenix How do you know that it is not holding pressure? Are you using a leak tester? If so for how long are you testing it for and how far does the pressure drop? A small drop in pressure could be normal after 15 minutes.
I'm curious as to how much it weighs now, I'm going to have mine in a vertical mount in my server case (so it's gonna be parallel with the desk). And I don't want it to sag onto the m.2 heatsink
It's heavy, with the stock cooler it's almost 5 lbs!
Are you getting the cablemod 12v power cable?
I will probably use the native one from the atx 3.0 psu I have until an angle adaptor that fits this waterblock comes out.
I have a build very similar to yours. I upgraded from 3080 to 4090 and used same block as you. When I went to boot system I got no signal and didn't know what the problem was. Turns out as I was using a PCIEx3 extension cable rather than PCIEx4 I had to change BIOS specifically to PCIEx3 otherwise it defaults to x4 and caused no video signal. This was a total pain to troubleshoot, draining loop ect. Just a heads up !
Thanks for that!! Glad to hear you figured it out.
How much weight?) >3.1kg< ?
Man that's my dream card. Too bad it costs a kidney
GPU prices are so wierd right now right?
I think that best looking waterblocks were for rtx20 series and for gtx 10 series. As for me these new are too short and they dont look that great
meanwhile I'm still rocking my 1080ti lol, this looks ridiculous big.. You have to show some game running on this HW, not having ESD wrist band is ballsy
The length isn't too bad but it's really wide! I'll do some benchmarks when it's in. ps I have a grounding mat that makes me feel a little better about it
@@SnaxanGaming yeah a mat that is grounded is fine as long as the chair is ESD safe or shoe.
Look at those monster! 😱🔥
Nothing like taking apart a $2K GPU to change out its cooling so it’ll have a smaller footprint
How’d you get an FE!? Bots are illegal
helloww ! where can i buy the table mat?
this is the one amzn.to/3RwrPzk
@@SnaxanGaming maraming salamat
Are you Filipino because I think I heard you said "wait lang" if I'm right?
That cat is soo cute, what breed is she?
☺☺☺
Otra ves video de PC que sentido de recrear el centido de información gracias. Tu perrito Seve algo triste desde el último video.
Nice to know everyone gets frustrated during this world of hell that is a gpu teardown.
23:20
I was waiting for the anak ng tipaklong to come out and say hi🤣😜✌️
The FE 4090 Box costs almost half the price of the GPU.
Hey Snax, which GPU do you recommend for a system that should cost no more than $2000?
Tough to say as there's too many variables on the other components and what kind of system you want :) At that price range I wouldn't pay more than $5-$700 for a gpu though, so that helps narrows things down. Maybe wait to see how good the new lower to mid AMD cards or the 4060 will be, or find a good deal on a 3000 series. GPU market is kind of stupid right now with the prices 😅 If you're in the LA area I can build you a decent one for that price.
@@SnaxanGaming Yo, thank you for this great response. I'm in no hurry and will take your advice and wait. Also am located in Germany which is as far as i know not in the LA area. 😄
@@benjithecat1294 lol yes Germany is a little far. Also if you are just aircooling or doing aio, you have a little more to spend on the gpu. Anyway good luck!
Story time: I'm down $3,700 and a 4090 just from it sliding out of the box and breaking on the floor. Ngl I was inspecting the box like a 6 year old does with a Christmas present
Oh no! Are you sure it’s broken? The card might still be ok. Maybe it’s just the cooler that got damaged
@@SnaxanGaming Unfortunately yeah it's broken. I had pulled apart the graphics card to have a look and some of the pins on the 4090 have been scratched. I tried booting it up and it kept saying no signal received. So I feel like its a video input issue with the card. Can only cry over spilled milk for so long haha
I'm not looking at video. I'm just looking at your beauty🥰
the only thing that bugs me is the cat being on the counter as she takes this thing apart. the static in cat hair just scares the fuck outta me that something will go wrong. happy it didnt though
cute pup
1 kidney would be sufficient, right? I still have 2 intact. 😂😂
By the time we usually decide the answer about these things, the next generation is already out lol :)
@@SnaxanGaming yeah, so true! Hoping you could do a video about choosing good GPUs from budget-wise GPUs to High-end GPUs.
Found out last day that if I want to use the Asus Z790 formula with this ABP version, I am screwed :( There isn't enough clearance (15 mm) from the screen/m.2 cooler. Is it really worth buying ABP instead of the "passive" backplate version of this cooler?
Noirs fine. Do not get the active backplate then. It won’t affect the anything because all the hot vram and stuff is all on the other side.
*no it’s fine
Thank you for your prompt, helpful reply! Keep up your really nice, enjoyable videos! @@SnaxanGaming
pwd bato 4080fe?
Dog cam ❤❤..
My graphics card still fine hahaha, in no rush to deplete half of savings.
This makes you smart! :) Keep using it as long as you can!
@@SnaxanGaming I wouldn't say smart hahaha, just that I find it not necessary to jump to another graphics card if my current one can still keep going. 😅
Is it weird if i feel like wrapping it in a burito and taking a bite off of it 😅😜✌️
hahaha Yes!
@@SnaxanGaming 🤣🤣🤣🤣✌️
hi I like this vdo.......
Hello Sarah carlos
Oh so you actually tore down the GPU I thought you cried is what that teardown meant
haha, well it could have ended in tears but thankfully not