How To Replace a PCV Valve Toyota Yaris
HTML-код
- Опубликовано: 27 авг 2024
- Step by step how to locate and change a PCV valve on a Toyota Yaris. This job takes 5 minutes and costs $5. It’s the easiest maintenance you will ever do and your car will run so much smoother after. PCV stands for Positive Crankase Ventilation and if your car is burning oil this project is for you.
Genuine Toyota PCV valve (valve sub-assy) part number 12204-21011. Go to your local Toyota parts and service centre with your 12 digit VIN number and you will always get the correct parts for your car.
10mm socket for the 4 bolts holding engine cover.
3/4” socket for the PCV valve.
If your oil is burnt you will need to change your oil. click the link for ny how to change oil video
• Toyota Yaris oil change
Well done. No stupid music or background distractions. No fumbling with the camera. No foul language. Very clear and informative. I especially like how you tell which size socket to use. I've been working on my own cars for the last 54 years, but will always check out a video on a procedure, even if I've done it before, for there may be a better way of doing something.
10/10 I am doing this repair in 2022, my Yaris what a great car, not flashy, not sporty, just reliable!
Excelente tengo un 2017 con 400mil km 💪
@@melvinpinto9083es El mismo parte que El video?
@@chingo3387 en el video esta acostado , en el mio yaris 2017 motor 2nr esta parado de pie vertical como quieras llamarlo pero hay mismo donde sale en el video .
@@melvinpinto9083 es el mismo numero de parte? yo tengo un yaris 2014 Encajará con el Yaris más nuevo? El caro de el es de 2008.
@@chingo3387 no entiendo bien la pregunta amigo
Both mas and pcv videos amazing
Clean, clear, precise!! No ridiculous music. Exact details, tools, everything one needs to know plus detailed list below.
Thanks so much, I'm ready to begin! 👍
Best how to fix it yet video!
Cleaned my PCV valves last month and it wasn't as dirty or fouled up as in the video but i used carb cleaner and shook it it dry,left it to air dry for 15 mins then replaced it.Did not notice any difference when driving thou but worth doing folks.
Same idea as the previous comments. No music, distractions or B.S.. Great work!! Thanks!
Just great. No high speed guitar music just good video and good sound. Perfect and thanks.
Thanks a million!!!❤️ you saved me over $200usd!
precise and very clear. great work.
excellent, can you explain posible failures of a dirty PCV
Simple & to the point videos. Great work...
Just saved me $105. Thanks!
I don't see why shops charge so much for this. The part is $6. It should take about 5 minutes to change.
Excellent! My goodness, great vid, you make it so easy to see. Doing this soon to my 1NZ-FE :-)
😅same here
Excellent video thank you for being so clear and precise
thank you straight to the point
Mejor explicación y sencilla imposible para remplazar la válvula.
Great job. Thank You for valuable help.
Simple easy video mate,thanks!
Super clean engine!
WD-40 and use it.My engine is in great condition.
you are amazing! thank you for this! now im gonna try diy on my yaris 2009.
Awesome, grab yourself a socket set and a screwdriver set and you’ll be able to do everything you see in my videos. The tools will pay for themselves :)
When attempting to loosen mine…
It didn’t want to loosen. So much so, I was afraid I’d strip the aluminum threads in the manifold, or break the pcv
How many VVT or oil control sensors does the 2007 Yaris have?
Also just bought and I ant to do a complete sensor tune-up do you have videos for that? or a link on locations/tips?
Práctico y preciso saludos desde Perú ayudó mucho en el tema
hi, could you review for me how to replace dash board yaris 2008, thank you
PCV valves usually never break. If at all, they become a bit dirty and can be cleaned easily, but it rarely becomes a problem actually.
No need to replace them alltogether.
thx for the video. very helpful
Thanks it worked for toyota echo 2001
My pcv valve won’t come off. It’s stuck. Afraid to pull too hard on the thing
Great video, thanks!
Thanks!. It's a good video.
Your welcome. Glad I could help:)
@1:06 The threads go all the way up to the wall of the picture valve but it does not screw all the way in, correct?
GOD bless and thank you
Just snug it up. That's all. 27 Foot Pounds if you want to know the actual specification.
Fácil y preciso, saludos desde Chile
Why is it my toyota yaris was to much vibration in the mornig.?
I tried removing mine but was hard so i stopped was afraid will end up braking the housing. Please idea to help me remove and inspect it
Thanks bro ✊
"Here is another angle" - Shows same angle again
@@onesmartchick50 kumbaya my friends 🤙🏻😋
Why to change that ? Sorry stupid question, but what different it makse to the car ? I don't know much about cars, so i like to know. Thank you
I have Vitz 2011.
I have diagnosed all mounting and they are perfect but I notice when i don't add Hi-Oct then there are too many jerks but with Hi-Oct or good fuel it jerks but a few times.Secondly, my vitz vibrates when i steer, pressing horn, opening/closing windows/mirrors.I don't know what's wrong with it. May be Battery issue? Electrifier weaken?
Can you help?
Jerks are classic symptoms of an ignition coil failing, I would definitely start with that first. It's the black tube sitting above the spark plugs. While your at it, replace the spark plugs because worn plugs and ignition coils can cause significant vibrations. I think this is almost certainly your problem.
Channel 1 thank you for the reply, I have no experience with engine things and I don't know how to take out spark plugs or ignition coils however I will try to find mechanic! Thank so much
Thanks, good job keep it up
if pcv valve bad what the problem
Es normal que pase aceite por ahi?
Thanks
Bro how do I remove the solenoid time valve on a toyota yaris
Channel 1. thanks do you have more video how to change oil. and. silicone. transmission. 2008 Toyota yaris 4 cilyndrer. 1.5. liter..thanks you.
Hi thanks for your video but if you show the problem before replacing because somebody don't know why you are replacing.
It’s preventative maintenance. Do it before it fails. If you wait until it fails it can cost way more to fix.
Thanks excellent
i have a problem of my car coils and because of that there is a sign of engine how can i fix it?
@Steve Fitz i got a yaris 2010 101hp it consumes 1litre oil per 1000km i got lpg also. i dont know what to do. did you fix it?
How to clean MAF sensor?
Mark Alayon vidio already up
thank u I have Toyota Yaris style 2012 85 CV 6 speed 139000km way and I have problem of consomation oil I never change pvc
Please am looking for the front crankshaft oil seal size
does the pcv need maintenance? when do u replace it?
What if it wont move? wont unscrew?
What could possibly happen if you don’t change it ?
You’ll need to replace the manifold gasket.
Thank you sir!
Do u no wear the pcv valve is on the 1.8sr yarsi
Thank you amigo.
Thank you!!
What it's help if I change the valve
is it a similar of engine yaris sedan 2015 ?
when i start the car and out the gear the car is doing missing then when i press full acceleration then is move what to do please help me...?
oke,,,, bud i have a 2017 1.0. where can i find it then ???????
Diesel engines do have PCV valve also?
Good vidéo
Is this the reason why my check engine light is on and it codes p0456? Small leak emisions system? So if i take it to a mechanic hiw much do they charge for this ?
It’s not a big deal.
Just replace the fuel/gas cap and if that doesn’t work
Worst case scenario you need a new charcoal canister $400
P0456 is a quick and simple fix don’t worry.
@@michael77x i did that alredy and it still on im guessing is the whats it called a seneloid issue u think? Im mean im no expert but if i get tune up will that help fix the problem u think?
I just bought a used Toyota yaris 2007 second hand. How do i know I need to change it? Can I do it myself. I don't own tools, so what will i need?
If the car is over reving than it probably needs cleaning. If it is broken than replace.
Thanks!
I changed it and the engine shakes too much now. Any idea ?
Ignition coil/electrical cable not reinserted properly.
Throttle body.
Engine mounts.
In that order
@@michael77x thanks for answering me. I didn’t touch the throttle body at all. Only the pcv valve was changed also. Before doing those replacements the engine was not shaking too much as now I put reverse and the car turned off😞
Great video. If i may ask, how can i know my PCV part number for corolla 1NZ FE engine? Thanks in advance.
The best way is to visit a Toyota dealer and go to the parts and service department. Your owners manual will have your vehicles unique VIN number.They will tell you what part/numbers you need. You can call them if it's more convenient.
take original part off and bring with you. the only way to be sure 100% of the time.
Hi , this valve is in the same place on a Toyota Yaris 2010?
Yes it is
@michael77x can you help me find your video on how to clean the pch valve? I can only find this one on hoe to replace it. Thank you.
Fuel saver you
Dung roi
why do you change?
is your engine the 1NZ-FE?
Yes it’s the same engine as the 2009 model. Actually I recently hired a new yaris while on holiday, apart from a few cosmetic changes it’s still the same engine.
I would still hate to see what the dealership would charge for this.
Under the manifold -on the 2ZR FE 1.8, not as easy to replace.
Spare parts 01:06 thanks .
Excelente
GRACIAS
A 3/4 inch socket??
Lol I thought the same thing :) I'd check for a matching metric socket first
What does the Pcv valve do?
Any tricks on getting the pcv valve off. I’m using the right tools it will just not come off. It’s stuck. I don’t want to use s breaker bar and damage the valve cover. Ughhhh
AeroKroil is the best penetrating lubricant ever. It's hard to acquire in some states, though.
Just wondering why would I want to change my PCV valve?
Hi! What makes the Toyota Yaris 2007 model to lose power while driving. I have changed the fuel pump, ignition coils and spark plugs but still loses power when i drive on the highway and when on the hill. You assistance will be highly appreciated.
Man I have the same problem with my toyota yaris everytime I am parked and I turn any accesories my car loss so much power RPM DROP TO 500
Mine was the cam sensors
Try changing fisher on the coils
Is yalis toyota or dahitsu
what was the torque spec for the valve?
typhoon320i I would not worry too much about the torque, but I would use plumping tape on the threads to make sure it is air tight.
Tip - Mark it with Tippex or a marker pen,then you'll know exactly how far to tighten it.
no loctite ?
At what milage or symptom?
It's best to just remove it and have a look at it. If it's clogged up replace it and if it's not put it back in. Main symptom is burnt engine oil. I check mine every oil change (5000km).
When should I replace the PCV valve?
It's best to just remove it and look at it. You should hear a clicking noise when you shake it, if not definitely replace it. Other wise if it looks gunky also replace it. If you neglect it you will have to replace the valve cover gaskets, so for $5 bucks just replace it anyway.
Channel 1 do u no wear the pcv is on the yaris 1.8sr sir i cant seem to find it
dude so i found the clamp but it was loose (un connected) and there was no pcv ??? wtf ??
sounds like a previous owner had a catch can or pgc delete
@@michael77x what does that mean ??
👍🏽💯
Do you know where the iac valve is located by any chance?
It’s part of the throttle body.
Channel 1 do you know if there removable from the throttle body
Thanks for the reply
I'm 99% sure if you need a new IAC valve you need a new throttle body.
Hi I'm facing some black oil reducing does it because of the pcv valve. My car is Toyota Vios 2004 batch
👍🏻
Hahahahahahaha I noticed the same thing....
Can't it be cleaned
Good question. Yes you can clean it but there is no way of telling if the inside is clean (like the throttle body). You don't want to push the carbon deposits further inside and clog it up. PCV valves are like spark plugs, they are cheap enough just to replace them. I hope that helps.
Channel 1 where I am located they are expenses.For the Toyota corolla one is $150
Ok if you want to clean it, then it sounds like you have to fully submerge it in solvent or Carby cleaner. Then thoroughly rinse it out using MAF sensor cleaner. Make sure you use anti seize on the threading when you replace it. Where are you located....Antarctica? $150 is way too expensive.
"use anti seize on the threading when you replace it" cheers for the info as many don't think of that.
hahaha 3/4” socket on a japanese car that’s a bad sign for any mechanic
Thanks
Your Welcome
Thanks