15:19 hi bob thank you much once again for advice don’t know what I’d do without you videos just one thing I got the transmitter working just as you did but the throttle stick is Mack to front is there a way of changing it round thanks mark
When you map the radio it should set up the stick correctly for sounds, so when you move the stick down you hear the backing beeper. If the truck then runs backwards reverse the 2 wires to the motor.
@@Radiolink_official Thank you, but I'm not there yet. I'm hoping to try one out on my Channel, before I start investing. I've only used FlySky for years now, and have been satisfied. This does seem good, but I have to somehow try one first. 😉
thanks for the video. it's really helpful. now if I want toove the gear from the place it is now (left side control, the one that has the throttle) to another one with the switches, how do I do that. another issue I'm facing, when I go forward, the sound active is the one for going backwards and vice versa, how can I fix it?
First unplug the motor and then re-map the MFC to the control. hat should fix your sounds so the beeper is in revere. Then plug in the motor so it works the proper direction.
I'm attempting to program the same truck . Can you program all the light functions the same way you programed the steering and speed. Thank you for any help.
Excellent guide. Really useful. I’ve followed it but I seem have reverse/opposite steering for some reason. I’ve checked in the transmitter and ch1 is set to NOR so not on reverse. Any ideas?
i set up the d/r switch and mapped the mfu to the at10 and the horn sounds work with the switch up but when the switch is down it's also horn and it doesn't do anything with the lights. i followed your steps and was wondering if you might know what could be wrong or off
Double check that your dual rate switch is actually working using the monitor function on the radio. Then re-map. Make sure the dual rate switch is up when you map it.
Hello, sir. Yes. You can bind lots of the receivers to AT10II at the same time. Just bind them one by one. When the receivers are powered on, they are boud together.
Good morning I saw your video to program my T10 ll control as the steps with the result that my truck still does not turn on something. I must review the control that for some reason does not let me turn my truck ...?
Silly question have set the settings correct bud had the horns and the lights working a few days ago and for sure reason the lights won’t work again have checked and Doublechecked that your rates and the sticks everything is set correctly is it possible it could be the mapping if not any ideas what is there another way just set up the lights
Hi Bob, great video! I like this radio, but can you tell me if it' s possible to bind 2 receivers together, as you do on the flysky radio? You know, if I want to connect a trailer.
Dear Bob, I really did not find your email to let you know that rl t10ll cannot operate it has a failure the cerbus when connecting makes a movement as if it were trying to rotate in both directions I had to disconnect channel one bone J4 does not start the transmissions no I know it is really thanks if you can give me a help.
Hi bob could you tell me please does this setup also apply to the mfc 03 too as I got a radiolink at 10 being a old skool chap getting a bit lost plus how do you setup 2 trucks on same radio sorry first time playing with digital transmitter finding it a bit overwhelming
Yes, same setup works with the MFC-03. The MFC-03 has a few different features. Watch my Flysky MFC-03 video to see those in operation, the AT10 will work the same way.
Hi, sir. Here is the way of how to reset AT10. Long press the MODE key to enter the BASIC MENU -> Rotate the scroll Dial to highlight the MODE TYPE option, choose the mode type needs to restore to factory settings, and press Push to enter -> Select RESET: Execute, Press PUSH key again as required, then show out “ Please waiting” and DEE sound. The factory setting is successfully restored after Dee sound disappears. Pls note it can only reset one model. If you want to reset all the datas. You need to reset each model.
Another great video Bob. I noticed your kinda running out of trucks to build. Have you ever tackled a bruder tamiya conversion and made a mack granite style truck with the interior and opening doors. That's something I've thought of doing. Possibly just the semi or the dump truck would be neat. Concrete truck as well.
Olá Tudo bem com você ? Me ajude se possível Meu mfc01 do nada ele desliga e liga novamente quando movimento os sticks Bateria com carga 100% Já pegou essa falha? Desde já agradeço
Probably servo interference. First you should only plug one servo into the MFC. Unplug any additional servos and then try it. Many digital servos interfere with the MFC so you might try an analog servo.
olá estou usando servos futaba 3003 fiz o teste sem plugar a iluminação e os servos, apenas os J4 a J7 no receptor, e a falha continua@@HobbyconceptsLLC
Good evening Mr Bob sir! If this is a Christmas present from you! To me! I really appreciate it 👍 🙏 😁🤩🤯🥳😆😎📯😇🤝✌👏👏👏👏🤝🤝🤝🤝👊🤜🤛😱👌👌👌👍👍👍👍👍💯 cool, awesome video 📹 thank you so much Mr Bob! God bless you 🙏 🙏🙏🙏🙏🙏🙏.
I haven't programmed an RC controller before and wanted to see if you could help me walk through how to program the light to function properly. I watched the video and still stumped which button should work each function
Thanks for your video, AT10II support dual stick return back to center, your video is amazing!
Ordered this transmitter for a tank ,it's gonna be perfect
15:19 hi bob thank you much once again for advice don’t know what I’d do without you videos just one thing I got the transmitter working just as you did but the throttle stick is Mack to front is there a way of changing it round thanks mark
Back to front sorry
When you map the radio it should set up the stick correctly for sounds, so when you move the stick down you hear the backing beeper. If the truck then runs backwards reverse the 2 wires to the motor.
Great I’ll try that thank you so much
Welcome back Bob!! Hop you enjoyed your vacation.
Such a cool Radio! Ill have to get one. 😎
Welcome to Radiolink family!!!
@@Radiolink_official Thank you, but I'm not there yet. I'm hoping to try one out on my Channel, before I start investing. I've only used FlySky for years now, and have been satisfied.
This does seem good, but I have to somehow try one first. 😉
@@CarminesRCTipsandTricks There is no problems, we really hope you could try to Radiolink in the future!😉
Excellent video, Thank you for taking the time to make it. was a big help.
thanks for the video. it's really helpful. now if I want toove the gear from the place it is now (left side control, the one that has the throttle) to another one with the switches, how do I do that.
another issue I'm facing, when I go forward, the sound active is the one for going backwards and vice versa, how can I fix it?
First unplug the motor and then re-map the MFC to the control. hat should fix your sounds so the beeper is in revere. Then plug in the motor so it works the proper direction.
Thanks for the next material with a bit of knowledge passed in a nice atmosphere :)
I'm attempting to program the same truck . Can you program all the light functions the same way you programed the steering and speed. Thank you for any help.
Excellent guide. Really useful. I’ve followed it but I seem have reverse/opposite steering for some reason. I’ve checked in the transmitter and ch1 is set to NOR so not on reverse. Any ideas?
Hi Bob, do the same principles apply regarding setting the parameters if using a beier sfr-1 and not an mfc? Thanks
Setting up the SFR-1 does not requires dual rates with the transmitter. Setup is very different. Watch my Beier Masterclass series for ideas.
i set up the d/r switch and mapped the mfu to the at10 and the horn sounds work with the switch up but when the switch is down it's also horn and it doesn't do anything with the lights. i followed your steps and was wondering if you might know what could be wrong or off
Double check that your dual rate switch is actually working using the monitor function on the radio. Then re-map. Make sure the dual rate switch is up when you map it.
Thanks bob great video
Hi bob does this allow 2 recivers to bind together like the flysky transmitter
I have not tested it.
Hello, sir. Yes. You can bind lots of the receivers to AT10II at the same time. Just bind them one by one. When the receivers are powered on, they are boud together.
Good morning I saw your video to program my T10 ll control as the steps with the result that my truck still does not turn on something. I must review the control that for some reason does not let me turn my truck ...?
email me. My email is in the description.
Silly question bud have you fitted a smoke in a truck if so are there eny that you would recommend
Silly question have set the settings correct bud had the horns and the lights working a few days ago and for sure reason the lights won’t work again have checked and Doublechecked that your rates and the sticks everything is set correctly is it possible it could be the mapping if not any ideas what is there another way just set up the lights
Hello from the France, how to mix 2 channels on the radio, example channel A and HRV? It is to operate the ramps carrying machine lesu LS-A0020
Hi Bob, great video! I like this radio, but can you tell me if it' s possible to bind 2 receivers together, as you do on the flysky radio? You know, if I want to connect a trailer.
I have not checked that.
Hello, sir. You can bind AT10II with many receivers at the same time. And control them at the same time.
Awesome, thank you
Thank you
Would the setup be the same for the MFC-02?
Yes.
Thank you so much bud I can finally stop pulling my hair out lol as all ways well explained and brilliant video thanks
Thank you Bob I have this radio now know now I had set it up wrong thank you
Dear Bob, I really did not find your email to let you know that rl t10ll cannot operate it has a failure the cerbus when connecting makes a movement as if it were trying to rotate in both directions I had to disconnect channel one bone J4 does not start the transmissions no I know it is really thanks if you can give me a help.
email me. My email is in video description.
Hi bob could you tell me please does this setup also apply to the mfc 03 too as I got a radiolink at 10 being a old skool chap getting a bit lost plus how do you setup 2 trucks on same radio sorry first time playing with digital transmitter finding it a bit overwhelming
Yes, same setup works with the MFC-03. The MFC-03 has a few different features. Watch my Flysky MFC-03 video to see those in operation, the AT10 will work the same way.
Thank you bob good news my engine now starts up need to do a few tweaking here and there
Excelente explicación, muchas gracias y felicitaciones por su interesante canal, le sigo hace mucho tiempo. Un saludo cordial
When a turn radio link control off before the truck The throttle on the truck goes on full speed. Is that normal?
Never turn off the transmitter when the truck is on. Turn off truck first then turn off transmitter.
How to do with the Futuba 10J?
Never have used Futaba
How do you reset model memory settings on this remote
Hi, sir. Here is the way of how to reset AT10. Long press the MODE key to enter the BASIC MENU -> Rotate the scroll Dial to highlight the MODE TYPE option, choose the mode type needs to restore to factory settings, and press Push to enter -> Select RESET: Execute, Press PUSH key again as required, then show out “ Please waiting” and DEE sound. The factory setting is successfully restored after Dee sound disappears. Pls note it can only reset one model. If you want to reset all the datas. You need to reset each model.
Hi how do I make my Transmitter turn off my.truck?
Watch my video on the Flysky and MFC
Another great video Bob. I noticed your kinda running out of trucks to build. Have you ever tackled a bruder tamiya conversion and made a mack granite style truck with the interior and opening doors. That's something I've thought of doing. Possibly just the semi or the dump truck would be neat. Concrete truck as well.
Hello bob just found your channel.
Please could you tell me if I can bind a fs-ia10b reciiever to Palladian radio ?
Ps great channel
Yes you can!
Olá
Tudo bem com você ?
Me ajude se possível
Meu mfc01 do nada ele desliga e liga novamente quando movimento os sticks
Bateria com carga 100%
Já pegou essa falha?
Desde já agradeço
Probably servo interference. First you should only plug one servo into the MFC. Unplug any additional servos and then try it. Many digital servos interfere with the MFC so you might try an analog servo.
olá
estou usando servos futaba 3003
fiz o teste sem plugar a iluminação e os servos, apenas os J4 a J7 no receptor, e a falha continua@@HobbyconceptsLLC
Good evening Mr Bob sir! If this is a Christmas present from you! To me! I really appreciate it 👍 🙏 😁🤩🤯🥳😆😎📯😇🤝✌👏👏👏👏🤝🤝🤝🤝👊🤜🤛😱👌👌👌👍👍👍👍👍💯 cool, awesome video 📹 thank you so much Mr Bob! God bless you 🙏 🙏🙏🙏🙏🙏🙏.
Looks like I may have helped :-)
@@HobbyconceptsLLC you did more than just helped! Your wisdom and teaching! Are truly a blessing to me! I'm grateful 🙏 🙏🙏🙏🙏💯💯💯💯💯💯💯👍👍👌👌🤯🥳🤩
Top demais
🔥💕😍👌👍
Con MCF03 e radio at9s pro, non funziona 😭
It will work with the AT9 as far as I know.
Si adesso funziona!! Con at9s pro il dual rate è a 125% quindi bisogna cambiare i fine corsa da 100% a 125% 👍
Glad you got it!
Don’t get what is wrong
I haven't programmed an RC controller before and wanted to see if you could help me walk through how to program the light to function properly. I watched the video and still stumped which button should work each function
How do you set a switch to turn the engine one and off
This video may help you: ruclips.net/video/80I1naa2giQ/видео.html