I wouldn’t call flysky cheap…I’ve been with them for over 10 years with not a single failed component or loss of signal resulting in a crash. The fs-i10 has the absolute best interface I have ever used period…and is extremely reliable with incredible range and a very well built radio.
I like your style, you involve your family and kids in your videos sometimes, that is a great quality. Been looking at them for some time, today i liked and subscribed, nice work.
Finally some one that I can understand when they talk thank u verry much I just got this radio 2 days ago but most of the people that are trying to explain about the radio I can't understand the words that are coming out of their mouth lol.
Flawless operation...over two years of intense touch and goes, tousands of approach and landings, i never ever experienced a single glitch. Very reliable transmitter and receiver...my experience. I own many other radios...and only Futaba T6J or Airtronics Aquila 6, do match the AT1011 for reliability needed for such intense workloads.
5 years ago video and its still on Amazon. Thanks for the review. Wondering if there is an upgraded version but looks like this is more than what i need. Nice to know its a Futaba knock off, hopefully less of a learning curve since i own a T6K Futaba Tx
Hey guy--- Dan here. This is a very useful review for me right when I'm shopping . I told you years ago I live very remote up in the mountains. No internet. Just barely have cell service. So no WiFi or super net. I can't be going online for every use it setting. It looks like that radio has all the settings available in it to choose from a menue ( without computers and internet) That's great. Also I really like the looks of it. I want to fly my BayangToys X 21 on it as well as a collection of others like Syma X8g series and JJRC F 11 S etc. My X 21 has dual GPS. ( One in drone and one in TX) It looks like this new version will communicate GPS both directions for my X 21 ? Good to see u doing well. Looks like a nice place to be. Dan
I subscribed within the first 2 minutes of watching my first video. Really like your style, and knowledge regarding transmitters and their relation to rc airplanes. I'm specifically interested in the v-tail talon behind you.
Thank you so much ;) for your support, i believe this radio could be really good but they did not get it any further. then came radiomaster and swept the market with RadioMaster TX16S. Awesome radio, worth every penny. now i am using TX16S, Futaba 14SG and X9D 2019 SE edition.
@@alishanmao, thank you for the advice. I did bite the bullet on the Radiolink, due mainly to my budget restrictions and the fact that he threw in (2) really nice foamies all for $100. I’ll see how well I enjoy the hobby, and then plan for the good stuff all things considered! Thanks again!
I remember when u moved your family back here a few years ago. Looks like your channel has grown. Place looks the same. I'm the guy in NE mountains of Washington state who talked back n forth with you about different. Countries. The world wasn't so messed up like now. I think you made a good decision moving back to there. I wondered if you ever sold any of those big agriculture drones. That place looks a lot nicer than that horrible desert. Glad to see ur doing ok. Just wanted to say hello again. Just subbed again. I'm trying to learn these birds. That radio looks good. I just want one that is easy to fly any if my drones. No DJI. I hate government linked devices that spy on us like our cell phones. Have a good life. Dandahermit
Thanks for comment Dan, we sold a couple of agri drones then moved on as trend kept changing. now we are building custom electric Paramotors onlyflyingmachines.com/product/eglidev4/
@@alishanmao wow you are resourceful. I've been an entrepreneur since child hood cause I had polio and had to creat my own opportunities. The tech evolution in electronics and batteries have made this possible. Very Kool dude!!
I want this transmitter...Have been using the At9s for over 2 years...Top notch equipment. Good seeing you Ali! I would think it would bind with all the Radiolink recievers...The r6dsm...r12dsm...R6ds..
Got mine a few days ago, I have had JR, Futaba and Spectrum, all 6 channels. The AT10II is my first 12 channel, have not use it to fly any of my airplane yet, this is my take on it so far, it does feel comfortable in my hands, all switches feel comfortable to reach, the Gimbels feel cheap, perhaps maybe I might be able to switch them out for better ones? I have not yet update the firmware. The menu is a little bit of a learning curve, but I know once I play with it more, I will understand it, you will have to download the manual off the internet.
Welldone Ali awesome review my suspicions are are confirmed.............. I owned the AT9 and to be honest It wasn’t a bad radi a lot better than Any flysky I own but not as good as Spektrum or Futaba it smacked right Dab in the middle. I am going for the New multi-protocol jumper radio. Awesome video Ali I alway loved your Content it gets straight to the point.
Futaba Receivers are too expensive. thats the reason people do not go for Futaba, else its a great Radio. Same issue with AT10II. Nowadays why FrSky Sells hot? its because they have found the key to sales. Good quality radio, good support around the world, and receivers are cheap and widely available. plus many FPV Racing quad manufacturers support built in FrSky Receivers too.
@@alishanmao For me a $4,500 650 quad is worth a $129.00 receiver. got lucky one-bay, Futaba 14 ch radio charger, battery, and 18 ch receiver for Less than $200 New in the box. Very lucky!
Yes. 4km range. U still have control of the aircraft even when it's gone from normal sight. (Buddy of mine was using binoculars. Still going, in control!)
I was gonna get a dx6e but this caught my eye I figured it was a cheap knockoff that wasn't worth it but for 100 dollars cheaper 6 more channels and in my opinion looks better and has A LOT of good reviews I'm gonna have to get it
Hi bro, can you please suggest whether this radio control is good for controlling a home made 16×16 rc model of a Topol M missile launcher which needs 10 different control element to be controlled. Please looking for your reply 🙂
Hello, i watched your videos and they are really useful. And i have a question. If you answer it, i will be very happy. We have a hexacopter drone. And we are try to control it with FLY SKY FS-TH9X remote controller. But the drone responds to remote contoller's reactions very late. How can we fix this problem ? Also we are using pixhawk orange cube.
possibly you are facing delay issues. you can change the radio controller to a better one. get a radiomaster with ELRS system like this one: bit.ly/rmboxertx
YXZNRC F09 UH60 Black Hawk 2.4G 6CH 3D6G System Dual Brushless Direct Drive Motor 1:47 Scale Flybarless RC Helicopter Radiolink AT10II 12 Channels RC Transmitter and Receiver R12DS 2.4GHz Radio Remote Controller Airplane Voltage Telemetry for RC FPV Racing Drone, Quad, Helicopter, Car it would be extremely helpful if you were to show a video pairing the two units together absolutely love your videos grate work
you will need to get a sbus receiver and a right connector to plug in to sbus port, then you can configure it. unfortunately i do not have this radio anymore so can't do any video about it
Hello! I do radio control trucks in 1.14 and it’s very important for me that there are a lot of functions, advise which mode to choose as many control channels as possible! I already want to buy a second receiver to distribute the functions to two receivers! Thank you so much for the advice and recommendations)))
Hi very helpful, can you please tell me is it possible to use the trainer switch somehow for a electric Starter for a dle ic engine any help would be appreciated thanks, keep it going.
if you can find receivers easily, you can buy it. if receivers are hard to find then better go with a radio that is popular in your country, and receivers are easy to find.
hi admin! can i ask you some question for this ? 1. i have to used Futaba T14sg and i can bind the R12DS fo T14SG ?? 2. what are the best " Close " TX have u seen before ??
Hello Ali (or someone else who also who knows), since you have experience with the Radiolink, do you know what the best choice is : Radiolink at9s/at10ii or the Radiomaster tx16s? I fly simple 250 size drone and helicopter. Nothing spectacular. I don´t need Crossfire or whatever. That the Radiomaster is multi protocol is nice, but is it a real advantage when not buying several different systems? What about the range of both, do you know? Thanks in advance
I just got Jumper T18 Radio control. tiny.cc/u6uvqz i believe radiomaster TX16S bit.ly/3bQAZBa is the same thing. you might wanna go for Multiprotocol radio. there is more support for it and you can bind it to many RC Stuff without having to spend money on Receivers. more choices to buy stuff and rx too
Hey Bud, I will be editing the Drive and Review of that Land Rover Defender You see on bench. and to be honest, it drove out of my expectations. I was not expecting such powerful rock crawling and off road performance out of it. My only issue which I will mention in Review is the shock are really too jumpy. An off roader needs softer shocks, softer suspension for better control. But this one has toy grade shocks that make it jumpy bumpy all the time. which is not a big issue, you can buy and replace some good hobby grade soft rock crawler shocks. and it will be an absolute beast off road and rock crawling. I love its looks and its performance is amazing. So if you wanna get it. go for it. why not grab using my link :) bit.ly/2GNBtuB I can get some blessings :) Review is coming in 3 to 4 days time.
trying to set this up with my helicopter. I have a Robird flybar less (I know its old). I can get all servos to work but when I applie throttle the motor does not spin. However the motor will spin when switch A is flipped, not very safe. Any ideas
Hey Ali, I have a question for you! If I started flying RC helis At 4, Now I am 10 Do you think I have an appropriate age to fly a 6 channel RC heli and now I only am stuck in 4 channel drones and helis so I started to fly a QS8005 GT RC Heli 3.5 Channel and Big also red at first. Now today I think I should fly 3D heli after I took a lot of youtube lessons do you think I have the appropriate age?
Dude, I know a 4 year old flying and doing hardcore 3D with 700 Size helicopters even. so why not. Get yourself a 3D helicopter and start learning to do aerobatics and 3D
bro i need help in setting up the radiolink at 10 ii to fly...quadcopter.......connection all correct, receiver is receiving signal, motors rotating, but drone is not flying
hallo kann die fernsteuerrung der gas steuerknüppel doppelt belegt werden so wenn man einen schalter schaltet das der gasknüppel einmal zum fahren des models nutzt und wenn man den schalter betätigt zum beispiel beim bagger einmal damit die ketten steuert und dan wenn man schalter schaltet den bagger den drehgranz drehen kann und denn mit den anderen den arm des baggers und die schaufel bewegen kann
Ali, wonder if you can help me with my radiolink AT10. Just starting to use it for the first time, and setting it up for a small Wing, figured out the controls ok finally but now when i turn it on, every time i get "Warning System". If I just turn the little select wheel on the bottom right of the transmitter, it opens up the radio and i can use it. Is there something that I have activated by mistake that now gives me a warning every time I turn on the radio?
@@alishanmao Yes thanks for this.. when I entered a new model, my Eagle, before I copied the settings from the other model into it, when the transmitter was turned on to a fresh start, it was ok, as soon as i copied model 2 to model one.. the same notice came up on startup. As you said probably a setting in it and it reminds you that you have something different set up. Thanks for the reply.
I'm sure you have figured this out after 5 months but it's the the throttle stick warning and you can disable it in the menu or model profile I believe. It's a safety warning so you don't spin up the props. Throttle needs to be at minimum value or you get the warning.
the price is very tempting but I would rather stick to the well known Futaba, Hitec and Sanwa brands. not a fan of spektrum due to reviews on forums. lots of problems of loss of control.
I wouldn't call this radio a Rip Off.... I think you meant to use the words Knock Off. A Rip Off would imply the radio does absolutely not work, which would be incorrect.
Assalamualaikum If I buy volantex Phoenix 2400 what's come in the box radio controller has or not & I am from India and banggood does not Ship in India this product what can I do...
I despise of RADIOLINK's customer support and sell everything I own that has RADIOLINK's name on it. If your unit fails I have lost trust in their support with any of their products. I have stepped over to buy another brand who has a proven track record of stepping up to the plate and supporting their customers who have purchase their equipment especially for my business.
That rotary selector potentiometer wears out very quickly...No spares sold and their Website looks like 4 year old did it....The Radio is easy to use though....Dont buy it.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I wouldn’t call flysky cheap…I’ve been with them for over 10 years with not a single failed component or loss of signal resulting in a crash. The fs-i10 has the absolute best interface I have ever used period…and is extremely reliable with incredible range and a very well built radio.
I like your style, you involve your family and kids in your videos sometimes, that is a great quality. Been looking at them for some time, today i liked and subscribed, nice work.
Finally some one that I can understand when they talk thank u verry much I just got this radio 2 days ago but most of the people that are trying to explain about the radio I can't understand the words that are coming out of their mouth lol.
Flawless operation...over two years of intense touch and goes, tousands of approach and landings, i never ever experienced a single glitch. Very reliable transmitter and receiver...my experience. I own many other radios...and only Futaba T6J or Airtronics Aquila 6, do match the AT1011 for reliability needed for such intense workloads.
glad to know that
The first companies who made TX are in JAPAN, the rest are clone Chinese copycat...etc.
5 years ago video and its still on Amazon. Thanks for the review. Wondering if there is an upgraded version but looks like this is more than what i need. Nice to know its a Futaba knock off, hopefully less of a learning curve since i own a T6K Futaba Tx
Another great video, purchased my first radio back in 2013 0r 14 from you, plus a 450 kit. the Futaba is still working.
Hey guy--- Dan here. This is a very useful review for me right when I'm shopping . I told you years ago I live very remote up in the mountains. No internet. Just barely have cell service. So no WiFi or super net. I can't be going online for every use it setting. It looks like that radio has all the settings available in it to choose from a menue ( without computers and internet) That's great. Also I really like the looks of it. I want to fly my BayangToys X 21 on it as well as a collection of others like Syma X8g series and JJRC F 11 S etc. My X 21 has dual GPS. ( One in drone and one in TX) It looks like this new version will communicate GPS both directions for my X 21 ? Good to see u doing well. Looks like a nice place to be. Dan
I subscribed within the first 2 minutes of watching my first video. Really like your style, and knowledge regarding transmitters and their relation to rc airplanes. I'm specifically interested in the v-tail talon behind you.
Thank you so much. This is an old video buddy. :)
@@alishanmao I've also seen recent videos. I really like your production value.
Thank you so much ;) for your support, i believe this radio could be really good but they did not get it any further. then came radiomaster and swept the market with RadioMaster TX16S. Awesome radio, worth every penny. now i am using TX16S, Futaba 14SG and X9D 2019 SE edition.
@@alishanmao comme règle le deux inter Switch hold et thr cut sur mon helicopter coupe moteur svp merci
Thank you for your thorough review. I'm about to pick up the Radiolink NOS for $50 as I start this new hobby! Wish me luck!
get a radiomaster and thank me later bit.ly/rmboxertx
@@alishanmao, thank you for the advice. I did bite the bullet on the Radiolink, due mainly to my budget restrictions and the fact that he threw in (2) really nice foamies all for $100. I’ll see how well I enjoy the hobby, and then plan for the good stuff all things considered!
Thanks again!
I remember when u moved your family back here a few years ago. Looks like your channel has grown. Place looks the same. I'm the guy in NE mountains of Washington state who talked back n forth with you about different. Countries. The world wasn't so messed up like now. I think you made a good decision moving back to there. I wondered if you ever sold any of those big agriculture drones. That place looks a lot nicer than that horrible desert. Glad to see ur doing ok. Just wanted to say hello again. Just subbed again. I'm trying to learn these birds. That radio looks good. I just want one that is easy to fly any if my drones. No DJI. I hate government linked devices that spy on us like our cell phones. Have a good life. Dandahermit
Thanks for comment Dan, we sold a couple of agri drones then moved on as trend kept changing. now we are building custom electric Paramotors
onlyflyingmachines.com/product/eglidev4/
@@alishanmao wow you are resourceful. I've been an entrepreneur since child hood cause I had polio and had to creat my own opportunities. The tech evolution in electronics and batteries have made this possible. Very Kool dude!!
I want this transmitter...Have been using the At9s for over 2 years...Top notch equipment. Good seeing you Ali! I would think it would bind with all the Radiolink recievers...The r6dsm...r12dsm...R6ds..
Hi, of course it can be bind with R9DS R6DS R6DSM R12DS R12DSM
Got mine a few days ago, I have had JR, Futaba and Spectrum, all 6 channels.
The AT10II is my first 12 channel, have not use it to fly any of my airplane yet, this is my take on it so far, it does feel comfortable in my hands, all switches feel comfortable to reach, the Gimbels feel cheap, perhaps maybe I might be able to switch them out for better ones?
I have not yet update the firmware.
The menu is a little bit of a learning curve, but I know once I play with it more, I will understand it, you will have to download the manual off the internet.
my ten-year-old son absolutely loves your videos and we accidentally order the helicopter with no remote
thank you so much
Start with Bismillah! MashaAllah brother. Subbed!
Welldone Ali awesome review my suspicions are are confirmed..............
I owned the AT9 and to be honest
It wasn’t a bad radi a lot better than
Any flysky I own but not as good as
Spektrum or Futaba it smacked right
Dab in the middle. I am going for the
New multi-protocol jumper radio.
Awesome video Ali I alway loved your
Content it gets straight to the point.
Good Choice :)
Old automotive instructor told me many years ago that wires are filled with smoke! But don't let the smoke out!!
yup and he definitely is a great instructor. very experienced hahahaha. well said
I had already purchased this controller
Its been a great radio for me.
thanks
Im so happy i found u again well let me watch lol
What kind of simulator cable i use my radio link at 10.can i use fly sky simulator cable?
Did you get any answers
Just super futaba 8 14 ch and 18 ch receiver NEW for $164.00 has battery and charger too.! Was looking at the Radiolink $150.00 at amazon.
Futaba Receivers are too expensive. thats the reason people do not go for Futaba, else its a great Radio. Same issue with AT10II. Nowadays why FrSky Sells hot? its because they have found the key to sales. Good quality radio, good support around the world, and receivers are cheap and widely available. plus many FPV Racing quad manufacturers support built in FrSky Receivers too.
@@alishanmao For me a $4,500 650 quad is worth a $129.00 receiver. got lucky one-bay, Futaba 14 ch radio charger, battery, and 18 ch receiver for Less than $200 New in the box. Very lucky!
well that sure was a lucky deal bud
Does it really 4km range? if so I think it's worth of buying .
Do not think so
Yes. 4km range. U still have control of the aircraft even when it's gone from normal sight. (Buddy of mine was using binoculars. Still going, in control!)
did he get the plane back :D
I was gonna get a dx6e but this caught my eye I figured it was a cheap knockoff that wasn't worth it but for 100 dollars cheaper 6 more channels and in my opinion looks better and has A LOT of good reviews I'm gonna have to get it
Hello.
Thank you for video.
Has it sound info ?
I mean f. ex. the flaps 15 command.
Can I hear the confirmation of that cmmand ?
Thank you.
BR
Peter
not sure if this radio supported sounds
Hi bro, can you please suggest whether this radio control is good for controlling a home made 16×16 rc model of a Topol M missile launcher which needs 10 different control element to be controlled. Please looking for your reply 🙂
Hello, i watched your videos and they are really useful. And i have a question. If you answer it, i will be very happy. We have a hexacopter drone. And we are try to control it with FLY SKY FS-TH9X remote controller. But the drone responds to remote contoller's reactions very late. How can we fix this problem ? Also we are using pixhawk orange cube.
possibly you are facing delay issues. you can change the radio controller to a better one. get a radiomaster with ELRS system like this one: bit.ly/rmboxertx
Great video. How does tis work for drones? Drone types like the F11.. Thanks and be safe..
F11 From SJRC? No it won't work with those.
@@alishanmao Thanks
What is the black and white plane behind you
YXZNRC F09 UH60 Black Hawk 2.4G 6CH 3D6G System Dual Brushless Direct Drive Motor 1:47 Scale Flybarless RC Helicopter
Radiolink AT10II 12 Channels RC Transmitter and Receiver R12DS 2.4GHz Radio Remote Controller Airplane Voltage Telemetry for RC FPV Racing Drone, Quad, Helicopter, Car
it would be extremely helpful if you were to show a video pairing the two units together
absolutely love your videos grate work
you will need to get a sbus receiver and a right connector to plug in to sbus port, then you can configure it. unfortunately i do not have this radio anymore so can't do any video about it
Hello! I do radio control trucks in 1.14 and it’s very important for me that there are a lot of functions, advise which mode to choose as many control channels as possible! I already want to buy a second receiver to distribute the functions to two receivers! Thank you so much for the advice and recommendations)))
On the hobby concepts RUclips channel he mentions to put it on ACROBATIC for running with the tamiya MFC01
Are the gimbals hall effect or potentiometer
Can At10 fly engine with cdi system ?. I want to change gas engine but still use this cause it's still great and reliable. Thank you
yes it can. all radios can
I have to get me an airplane like urs lol like it very much
Hi very helpful, can you please tell me is it possible to use the trainer switch somehow for a electric Starter for a dle ic engine any help would be appreciated thanks, keep it going.
yes you can. just assign the switch to electric starter
Olá cara, tudo bem.
Nos dias de hoje vale a pena comprar esse rádio para aeromodelos?
if you can find receivers easily, you can buy it. if receivers are hard to find then better go with a radio that is popular in your country, and receivers are easy to find.
@@alishanmao comprei o Taranis x9d plus
sir, can u suggest compatible receivers for Futaba T10J for freestyle fpv quad ?
tiny.cc/y1tc6y
tiny.cc/43tc6y
tiny.cc/q6tc6y
Try these 3. Support SFHSS and you can configure on SBUS
Ali bro EID Mubarak. Is this radio has capabilities to setup & fly with kbar or any flybarless system helicopter?
Eid Mubarak to you too. yes I believe so
@@alishanmao thanks bro. Gonna order after lockdown ends. Allah Hafiz
sir i like you and your video
Thanks for liking
hi admin! can i ask you some question for this ?
1. i have to used Futaba T14sg and i can bind the R12DS fo T14SG ??
2. what are the best " Close " TX have u seen before ??
Well nothing beats Futaba. so do not think about other Txs. just go with Futaba if you have one
@@alishanmao Futaba can mix with the airplane that have full vector servo ??! Thanks for that :*
@@alishanmao and what about Radiolink R12DS RX! i can bind this with my T14sg ??
@@tuanbuiminh2674 Hi, you can't bind R12DS to futaba, R12DS receiver only works with Radiolink's AT9S, AT9S PRO, AT10II, AT10.
Can AT10II work stably with Trex 650x. I don't know, you answer me. Thank you
If you use a compatible receiver yes it will. but i suggest you buy Futaba
@@alishanmao Thank you.
Hello Ali (or someone else who also who knows), since you have experience with the Radiolink, do you know what the best choice is : Radiolink at9s/at10ii or the Radiomaster tx16s? I fly simple 250 size drone and helicopter. Nothing spectacular. I don´t need Crossfire or whatever. That the Radiomaster is multi protocol is nice, but is it a real advantage when not buying several different systems? What about the range of both, do you know? Thanks in advance
I just got Jumper T18 Radio control.
tiny.cc/u6uvqz
i believe radiomaster TX16S
bit.ly/3bQAZBa
is the same thing. you might wanna go for Multiprotocol radio. there is more support for it and you can bind it to many RC Stuff without having to spend money on Receivers. more choices to buy stuff and rx too
Great review. How is that Land rover jeep on your bench? I'm looking at one and wondering how good it is.
Hey Bud, I will be editing the Drive and Review of that Land Rover Defender You see on bench. and to be honest, it drove out of my expectations. I was not expecting such powerful rock crawling and off road performance out of it. My only issue which I will mention in Review is the shock are really too jumpy. An off roader needs softer shocks, softer suspension for better control. But this one has toy grade shocks that make it jumpy bumpy all the time. which is not a big issue, you can buy and replace some good hobby grade soft rock crawler shocks. and it will be an absolute beast off road and rock crawling. I love its looks and its performance is amazing.
So if you wanna get it. go for it. why not grab using my link :)
bit.ly/2GNBtuB
I can get some blessings :) Review is coming in 3 to 4 days time.
@@alishanmao Hey. Thanks for the prompt response. I look forward to the review.
May 11th :) you can watch it.
Thanks.
What I the range of this transmitter and receiver in the sky?
1km max i believe, depending upon receiver can be 2km
@@alishanmao what do you think about fsi6x transmitter?
trying to set this up with my helicopter. I have a Robird flybar less (I know its old). I can get all servos to work but when I applie throttle the motor does not spin. However the motor will spin when switch A is flipped, not very safe. Any ideas
maybe its your flight controller feature which requires a switch to arm and disarm motor. very safe and neat feature
Hello can you tell should I buy at 10 or frsky qx7
tiny.cc/74k6tz
buy this and thank me later
@@alishanmao can you recommend any above 200 dollar radio
Can you recommend 1 or 2 radios
Can you use this radio with the New tinygo 4k by Geprc? It says it runs FHSS. Newbie question. Learning as fast as I can.
if it supports FHSS then yes you can
Aslam o alikum brother i have a problem with my at10ii can you tell about duel elevator trim fancationb
Hey Ali, I have a question for you! If I started flying RC helis At 4, Now I am 10 Do you think I have an appropriate age to fly a 6 channel RC heli and now I only am stuck in 4 channel drones and helis so I started to fly a QS8005 GT RC Heli 3.5 Channel and Big also red at first. Now today I think I should fly 3D heli after I took a lot of youtube lessons do you think I have the appropriate age?
Dude, I know a 4 year old flying and doing hardcore 3D with 700 Size helicopters even. so why not. Get yourself a 3D helicopter and start learning to do aerobatics and 3D
bro i need help in setting up the radiolink at 10 ii to fly...quadcopter.......connection all correct, receiver is receiving signal, motors rotating, but drone is not flying
What do you think is the best inexpensive multiprotocol radio.
Radio Master or Jumper
bit.ly/3bQAZBa
bit.ly/2zDs87y
RadioMaster TX16S Hall Sensor Gimbals 2.4G 16CH Multi-protocol RF System OpenTX Mode2 Transmitter with TBS MicroTX (Mode 2)
and
RadioMaster TX16S 2.4G 16CH Multi-protocol RF System OpenTX Potentiometer Gimbal (Mode 2)
sir need some help . can you tell me how to get 200 km range uhf for dorne. and how to buy scherre transmitter .
build it. buy a good UHF System
Hi , I have an XK A800 rc glider and would love to have a better tx for it , do you know if you can bind this tx to the XK A800???
no it can't. XK Uses SHFSS Protocol and only Futaba T8J T10J or T14SG can use that protocol and bind with XK products.
hallo kann die fernsteuerrung der gas steuerknüppel doppelt belegt werden so wenn man einen schalter schaltet das der gasknüppel einmal zum fahren des models nutzt und wenn man den schalter betätigt zum beispiel beim bagger einmal damit die ketten steuert und dan wenn man schalter schaltet den bagger den drehgranz drehen kann und denn mit den anderen den arm des baggers und die schaufel bewegen kann
ok
How do I set up the Failsafe for this radio using Inav?
Can this be changed from mode 2 to mode 1 & vice versa? Didn't see it in the vid on any of the screens
I know your post is old, but yes you can, there is a video on how you can do that I have seen.
Hey. Does this controller support a variometer? I.e feed back to beeps?
no idea buddy
Hi, it supports RSSI and low battery alarming, it will sound DDD to remind you.
I am trying to bind the Radiolink 12 CH AT1011 Transmitter with the ORX SF7003XS Receiver. It is FHSS and should bind. Any help would be nice.
radio link does not support SFHSS or FHSS Protocol I believe.
@@alishanmao It says it supports FHSS.
really? how did i miss it LOL. if it supports maybe it can bind. or maybe need a separate module to install
Ali, wonder if you can help me with my radiolink AT10. Just starting to use it for the first time, and setting it up for a small Wing, figured out the controls ok finally but now when i turn it on, every time i get "Warning System". If I just turn the little select wheel on the bottom right of the transmitter, it opens up the radio and i can use it. Is there something that I have activated by mistake that now gives me a warning every time I turn on the radio?
if after turning on things are working right, just fly it. I just suspect its firmware issue or some switch or programming issue.
@@alishanmao Yes thanks for this.. when I entered a new model, my Eagle, before I copied the settings from the other model into it, when the transmitter was turned on to a fresh start, it was ok, as soon as i copied model 2 to model one.. the same notice came up on startup. As you said probably a setting in it and it reminds you that you have something different set up. Thanks for the reply.
I'm sure you have figured this out after 5 months but it's the the throttle stick warning and you can disable it in the menu or model profile I believe. It's a safety warning so you don't spin up the props. Throttle needs to be at minimum value or you get the warning.
Does it have flight modes, like max bank angles, roll rates, heading/altitude holds...with multiple modes set within the same model profile?
Hello, sir. for flight modes switch, AT10II transmitter needs to work with flight controller.
Will this radio work with XK Drones & Helicopters????
I am not sure. it says FHSS, but XK Drones and Helis use S-FHSS. so double check before you invest.
Which one is.best radiolink at2 2 or frsky qx7
RadioMaster TX16S all the way. you will thank me later
tiny.cc/vqsbsz
bit.ly/30GmwTN
how to do auto centering throttle of radiolink at10????????
Hi Ali, Is Radiolink AT10II compatible with XK K130 Heli ?
No
@@alishanmao thank guy.
Hi, what are your thoughts on using this radio on cars?
yes you can but for RC Cars Pistol Type radios are best
alishanmao ok cheers. I thought about a stick radio to give me options if I want to fly. Could you do a video for setting this up for cars?
I do not have this radio anymore. but its easy if you install receiver, just need to connect throttle to Channel 3 and steering to channel 1.
alishanmao cool. This radio also comes with a throttle return back which I believe self centres. Would you know how to fit this.
you need to open the radio and add a spring to throttle gimbal thats it
Is this radio gonna bind with OMPHobby M2 heli??
no
alishanmao thank you :)
how far can this transmitter send signal?
1km
Would this Radio work with RC ERA Helicopters?
no
@@alishanmao Thank you!
@@alishanmao i see that you like the Radiomaster TX16s, are they easy to bind to the RC ERA helicopters?
yes Tx16s can bind with RC Era Helicopters. because it has 4-1 multi protocol module.
always welcome buddy
Hi. Does anyone know what model type I'd select for a flying wing?
wing :)
@@alishanmao ha
Not an option
@@marcustheodocius182 bit late, but I know the answer - it's glider, (1A+1F) (Elevon). It's in the manual!
the price is very tempting but I would rather stick to the well known Futaba, Hitec and Sanwa brands. not a fan of spektrum due to reviews on forums. lots of problems of loss of control.
Assalamualaikum brother..from INDONESIA
wassalam
😎😎😎
Assalaamu 'alaykum brother. Ramadan kareem, happy fasting. Do you have info on the transmitting power (mW or dBm) of it?
Funny ending 😄
What is the model memory capacity?
Ricky Jenkins 15
I wouldn't call this radio a Rip Off.... I think you meant to use the words Knock Off.
A Rip Off would imply the radio does absolutely not work, which would be incorrect.
thanks :)
What did you do to make that robot angry? Crying my eyes out laughing. Where can I purchase this radio?
That robot was nasty :D
Radio Link
tiny.cc/myi7qz
Does this work with spectrum receivers? I need a good transmitter!
it cannot support other brand's receivers, but AT10 support kinds of receivers from Radiolink: R9DS R6DS R6DSM R12DS R12DSM
Assalamualaikum If I buy volantex Phoenix 2400 what's come in the box radio controller has or not & I am from India and banggood does not Ship in India this product what can I do...
Wassalam
In the box only Plane PNP version. you need to have your own radio, receiver and battery to fly it
Have lost 3 planes due to controll failure with this radio.
sorry to hear that
I despise of RADIOLINK's customer support and sell everything I own that has RADIOLINK's name on it. If your unit fails I have lost trust in their support with any of their products. I have stepped over to buy another brand who has a proven track record of stepping up to the plate and supporting their customers who have purchase their equipment especially for my business.
sadly this is the case with majority of Chinese companies
no...i wont buy a radiolink remote..cheap also no....no no no
That rotary selector potentiometer wears out very quickly...No spares sold and their Website looks like 4 year old did it....The Radio is easy to use though....Dont buy it.
Radiolink is much better than futaba. 😬
Transmitter is good but Reciever sucks
Explen in hindi sir