Man soooo much hate going on, can we just stop for a minute and take some time to appreciate the time put into the making of this video for us??? I’m doing this build.. and couldn’t be more grateful.. thanks YamatoFactory!!
This is friggin' awesome. As much as I enjoy Tamiya kits (they're "fun"), this takes things to a whole new level. Kinda like building a long-haul version of a Class 1 crawler. Are the instructions also in English?
@@robbryan3044 I’ve done 5 of these kits since then (truck/trailer/friend) and I’ve learned a lot from them;) yeah there in English too, the 1.7mm drill holes? I used a 1/16 bit instead just a smidge smaller, bit harder to tap it, but holds the screw way better, stripped a few holes on my first kit. Don’t over tighten as well!! Just a tiny bit of thread lock…Other than that just take your time and I goes together pretty smooth!
hurts to see the drilling and tapping is done. and air suspension with hard outside plastic? what is inside a spring ???. (expected some kind of rubber bags with tubing to a control box.)
Seems like a lot of nothing for a lot of money. The setup will mostly be hidden by the frame and wheels during operation with practically zero to minimal difference in functionality.
Dude very cool. Where can I get parts for a build I am planning of a 1/14 scale 379 Peterbilt. I am going to need rear differentials, front axle those air bags of course and, well everything. I have scene some of the kits on line but I am going to tack it to the next level so I am going to need parts. Well if you can help me it would be appreciated, thanks.
Человек сверлит отверстия на сверлильном станке, с продольной и поперечной подачей, при этом прикладывая небольшое усилие (сверло около 2,5 мм) видно отклонение направляющей (. Зато резьбы в этих отверстиях нарезает вручную , не выдерживая прямой угол. Вопрос - имея такой продвинутый станок, зачем так неаккуратно нарезать резьбу?
Various reasons for wearing gloves when building models here are some examples 1. keeps away the oil on your fingers leaving finger prints on parts especially windows 2. give you more grip when picking up screws and other small parts. 3. keeps your hands and fingers clean when using oil or grease. some people have skin conditions like Eczema which can be painful. Gloves prevent foreign objects like dirt, dust, oil and grease away from your hands... hopes this helps with your question.
Possibly didn't use loctite as this was a demonstration video of how the parts are assembled and operate.. they may not be staying on the particular model he is doing it on.
Who cares, it's a toy. Go work on a real class 8 and see how precision is held to 1/8 of an inch for most stuff. It scales down about right . ITS A TOY
Man soooo much hate going on, can we just stop for a minute and take some time to appreciate the time put into the making of this video for us??? I’m doing this build.. and couldn’t be more grateful.. thanks YamatoFactory!!
This is friggin' awesome. As much as I enjoy Tamiya kits (they're "fun"), this takes things to a whole new level. Kinda like building a long-haul version of a Class 1 crawler. Are the instructions also in English?
@@robbryan3044 I’ve done 5 of these kits since then (truck/trailer/friend) and I’ve learned a lot from them;) yeah there in English too, the 1.7mm drill holes? I used a 1/16 bit instead just a smidge smaller, bit harder to tap it, but holds the screw way better, stripped a few holes on my first kit. Don’t over tighten as well!! Just a tiny bit of thread lock…Other than that just take your time and I goes together pretty smooth!
実車トラックの整備をしている者です。
かなり忠実に再現されていて素晴らしいキットですね😊
that is an amazing kit. Very detailed. While it is not a true air suspension I think it looks fantastic.
I have not seen worst tapping job. But the build is really good.
Nice video, (little too long) Main matter: I think you need to use a more solid drill, this thing flexes like a tree in the wind....
こんなのあるんですねぇ。
というかラジコンパーツの流用とか発想が凄い。
ちょっと興味出てきた。
Não é atoa que esses brinquedinhos são caros...
A malícia da montagem e de quem está montando...
Simplesmente maravilhoso...
Estou até sem palavras!
hurts to see the drilling and tapping is done. and air suspension with hard outside plastic? what is inside a spring ???. (expected some kind of rubber bags with tubing to a control box.)
TAMIYA best truck there is
Yes, awsome models, but do you know "scaleart"? Absolut perfection.
Absolutely sweet suspension. Great video. Got the website but having trouble switching it to English to understand and make a purchase
it's $175.00 for the kit. Just google scaleclub .
Brilliant, artist at work.
Esse fabricante scaleclub está parabêns. As peças que eles fabricam são muito realistico a tamiya não chega nem perto.
Good mister 👍
Cool video! Love the jack stands.. Gloves were a good idea, keeps the small finger smudges from occurring and distracting the process! fun video!
ruclips.net/video/ybKX2eE2q3Q/видео.html
Its not air suspension unless its actual air bags with a compressor, good video tho
Lindo demais perfeito 😍😍 parabéns 👏👏👏👏👏👏👏👏👏👏👏
Super video but the title is wrong. This is spring system looks like '' air system''.
Amazing
Pehhh apike ndakumum bang , sukses selalu
Nice,a Kenworth 8 bag.
The 4 torque arms are not even needed if its mostly solid ride. It just up and down movements. The differential is not going to shift left or right.
Do you not understand the point of a model?
Izin buat referensi 🙏
Videonya keren 👍🏻👍🏻👍🏻
Great but that music is grinding after 30 mins
Que coisa mais satisfatória de ver
That's very very close to Kenworth AG400 suspension
I like it. Your car is very beautiful.👍👍👍💕💕💕💕💕💕💕🎸🎸🎸🎸🎸🎸🚗🚗🚗🚜🚜🚜
Outro nível esse equipamento!
C trop classe 👍👍
Amazing product!
I have been searching the internet for this kit. No luck , anyone know where I can find this kit for sale? Tthanks
Seems like a lot of nothing for a lot of money. The setup will mostly be hidden by the frame and wheels during operation with practically zero to minimal difference in functionality.
Impressive but does it fit for rcbrmin 1:14 differential lock axles too?
Dude very cool. Where can I get parts for a build I am planning of a 1/14 scale 379 Peterbilt. I am going to need rear differentials, front axle those air bags of course and, well everything. I have scene some of the kits on line but I am going to tack it to the next level so I am going to need parts. Well if you can help me it would be appreciated, thanks.
Just buy the Tamiya kit
can you tell me what size nut driver or tool that is beeing used for the small screw?
I wonder how they manage to work with gloves, and I don't see the problem in doing what he does with bare hands
All the components are very similar to the real ones!
Человек сверлит отверстия на сверлильном станке, с продольной и поперечной подачей, при этом прикладывая небольшое усилие (сверло около 2,5 мм) видно отклонение направляющей (. Зато резьбы в этих отверстиях нарезает вручную , не выдерживая прямой угол. Вопрос - имея такой продвинутый станок, зачем так неаккуратно нарезать резьбу?
Возможно, боится сломать метчик
Is good video 👍
Mantulll bossscu 😍😍
Itu beli nya dimana bang
Buena esa suspencion escala yo las arreglo saludos desde MEXICO
Good
Nice men
I"ve never seen such a great video in my life I wish you prosperity
형제 친하게 지내봅시다.
😀😀😀
yamato = Order of the Rising Sun OK?
Does it come with the stencil for drilling?
yes it does you will see at start of video the guy pulling it out of the same bag as the other parts came in
went to the site, couldnt figure out how to order it
What are the gloves for
Various reasons for wearing gloves when building models here are some examples 1. keeps away the oil on your fingers leaving finger prints on parts especially windows 2. give you more grip when picking up screws and other small parts. 3. keeps your hands and fingers clean when using oil or grease. some people have skin conditions like Eczema which can be painful. Gloves prevent foreign objects like dirt, dust, oil and grease away from your hands... hopes this helps with your question.
I love the airbags, but the tapping starting at 10:00 was cringe inducing. Up to 45 degree tilts while tapping. *shuddering*
Interesting!
At 26:09 are the axels ofset that the connector isnt straight?
they are often like that in 1:1 scale trucks as well
@@randomrandy1166 if he changes the direction of the front axel they aline perfectly
GREAT VIDEO THANKS
VERY HELPFUL
Wowwwww, Like ,. I also make formula 1 car models out of cardboard, how to make formula 1 car used cardboard , my.. channel , in EA Art Creator.🙏❤️
Интересно, когда он шнурки завязывает. Он их тоже по 100 раз обнюхает, с каждой стороны на них посмотрит, а потом инструкцию ищет от ботинок
will this kit work with Hercules Hobby models?
Looks awesome pity about the design flaws
ou peut on trouvé cette suspension pneumatique
Where do you buy the kit for air suspension please
that suspension is from kenworth
@sami bruh you think a mainstream truck manufacturer would get their designs from some dumb rc copy?
Tu la acheté où ?
Bom demais...
Bhai pura vidio banaya karo pz bonut sab thank you
Gostaria de saber como e onde comprar pecas para montar
Which Tamiya Chassis are you using? I'm trying on Scania 3 axles ones and it seems not possible to safely fit the last couple of aribags
Anyone see him add any Loctite to them screws?
Possibly didn't use loctite as this was a demonstration video of how the parts are assembled and operate.. they may not be staying on the particular model he is doing it on.
What company of rc cars does this fit with.
Which axles is he using?
That's a piss poor way to tap the holes as you should have used a tapping jig to keep the tap straight .
Who cares, it's a toy. Go work on a real class 8 and see how precision is held to 1/8 of an inch for most stuff. It scales down about right . ITS A TOY
Very nice 👍
So beautiful ji
Oder kese kare ji link bhejo ji
bhai ye banda korean he hindi nahi ati unko
この、エアサスパーツを現在発売中のキットに組み込むのですか………細かい作り込みですな、俺氏、イライラして放り投げそうな程精密に出来てて羨ましいッス(^^)d
一番星号に入れたいんだよねこのエアサスキットを
Keren abis
Wow
Jiga asli na nya kang
本物と同じエアサスシステムでしょうか？
エアサスではないですね。
エアサス風のやつ
Itu beli onderdilnya di mana tas..
Looks pretty and all, but they just act like regular suspension. Bit disappointing
Cómo puedo adquirir un tractocamion por favor 🙏 Soy del estado de México ojalá me lo pudieran desir 👍🙋🏻♂️
Super precise when drilling taps like a drunk octopus
Algum brasileiro aqui ou e só eu ? 😂
you Guys sell these or sum???
What is a gd beginner kit to do and where do u get them at
None of this is for a beginner.
Tengo una pregunta el motor será eléctrico o gasolina ?
Tôi có thể mua sản phẩm này ở đâu??
Where can I get this kit !@@
Gentileza informações sobre onde comprar e preços.
👍👍👍👍👍👍
Где заказываешь, чё за фирма скока стоит???
Оставлю элькомкоменто, все равно тут солянка с разных стран, никто ниче не поймёт 😂
Эх, были бы подушки пневматические, цены бы не было
Very slowly work...😴😴😴
Como comprar as peça pra montar na minha casa?
I enjoyed a great video let's be friends 😁😁😎😎🤩🤩
우리 친구 해요~~~~^^
👏
ruclips.net/video/ybKX2eE2q3Q/видео.html
Где можно купить такие модели?
Meser nu kie sabaraha pangaos na
buenos días una consulta como puedo comprar un carro de juguete soy de Guayaquil
bien
Nao entendi porque essas luvas, muita frescura.
Unfortunately, it doesn’t look scale when it’s compressing. You can tell it’s a not a real air bladder...
Well, it’s an RC toy, so I can understand why it wouldn’t fool anybody into thinking it was real.
Why are you wearing gloves
Covid
ruclips.net/video/ybKX2eE2q3Q/видео.html
Lindo,,,,,,,,
too much prescition on the drilling and too much destroying on the tapping...
🤦🏻
@canuckguy worried
😄
Seriously, that is exactly how to NOT tap threads!
Scania Mercedes suspension ...