Top secret Tires for 250mph Sausage RC Car project
HTML-код
- Опубликовано: 13 сен 2023
- 🚗Win one of my cars raffall.com/kevin_talbot
Get Car Here amzn.to/3GNSGCZ
Scorched Parts scorchedparts.co.uk/collectio...
Perfect Pass Parts amzn.to/43w0IKt
M2C 6 Lug wheel Hex badtouchbreakers.com/products...
ONYX Lipos onyxrcpowersystems.co.uk/
Motors
ESC -
Body deltaplastikusa.com/collectio...
Tires profile.php?...
Servo - amzn.to/3oE2pWy
GPM Wing Support www.gpmparts.com/arrma-infrac...
💚Kevin Talbot Rumble rumble.com/user/KevinTalbot
🧡Kevin Talbot instagram / talbotkev
❤️Kevin Talbot TikTok / kevtalbot
💙Kevin Talbot Facebook page / kevintalbotvideos
💡Check out my Business RUclips Channel: / @kevtalbot5356
🎥My LIVE Stream RUclips Channel - / @kevintalbotrc
🚗Kev's RC Basher School - kevin-talbot.teachable.com/p/...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Most videos are RC Cars, business, Amazon FBA, eBay, Monster truck, Cars, insurance, cryptocurrency and other topics.
subscribe!!
#Kevintalbot #rccars #rc
I think you should focus more on the rim design, so it doesn’t have the deflection when it’s spinning. If you can keep the rim true the tire have a lot more lifespan, whether it be a solid strip of rubber glued on or hard foam.
i noticed this as well, i don't know how nobody has seen that. The inside part of the rim where there is no support is causing the ballooning, you can take your hand and squeeze the wheel they are so flimsy. Need a stronger rim, metal, carbon, just thicker, or some kind of support there.
I agree, the foam gets ripped off because the rim expands uneven.the weight of the car will reduce this but not enough to prevent it.those rims are key to keeping the rubber side down; :)
i would suggest a wheel out of steel;Dont use aluminium because my teacher in school told me that aluminium is actually heavier then steel because its much weaker.They say its better because it looks better But a steel rim is actually better then a aluminium one.
Almost for sure the inside is expanding more then the outside!
absolutely, maybe an inner ring to support it!
Exactly. The rims will be the point of failure. I'm surprised that he's not using aluminum.
We have a carbon filament winding machine at work, usually used for winding high speed rotors that run at well over 100k rpm. You need a carbon sleeve that presses on over the wheel under interference. The hoop stress will resist that expansion you are seeing, then possibly bond the tyre onto the sleeve.
Seems to be a good solution and on the top, the compound of cfk and genuine wheel material reduces vibrations on the rim what results in less stress too.👍
That's sounds legit to me, i love these comments. I also like smarts and problem solving
nah at that rpm only good for drifting, no speed run
Think Castle use a Kevar band in their motors?
Not sure if going for a GRP/kevlar weave wheel, but adding a grip element (ie weave a rubber element into it ,in the manufacture process) , so the tyre is a structural part of the wheel, not 'just' stuck on after?
Call me crazy I would use aluminum or carbon fiber rims
I was just thinking and came up with a idea. It seems to me that the foam isn't the problem because look how always the inner rim expands. Try cutting 1mm inner side foam and put a fiber or metal ring around it so it doesn't expand.
This is the answer that will help Kev brake the record!! It's genious in its simplicity. This needs to get upvoted hard!! Those banana's held up to nearly 50k rpm... it wasn't the foam detaching, it was the inside of the wheel failing. Strengthen that, and you've got your world record contending wheels. Kudos! :)
I was thinking either this, or a wheel that has even a little support on the inside when it’s designed. Basically what you’re saying but on the inside
This test was not in load mode. And because of the high rpm, the rims became like that, and when it is installed on the car, the main problem is the foams. Because this car is very heavy
@@amirxr8464 the same effect still happens just not as much. 100% worth trying over just assuming it’s cause it’s “under load”
Would be hard to put on. My first thought was something like a piston O-ring but that has a notch in it to allow it to expand and that is what we are trying to prevent. Would almost need to bend the wheel in to make it fit that way it isn't larger then the wheel and can't open up.
overall though the thinner the wheel the easier this will be to do as there is less lip to worry about expanding out, however it does mean less traction to get up to speed. so you would become more limited by max run distance.
The amount of power you have to have to not only strip the inner wheel while still completely blowing the outer diameter off of the rim is absolutely insane 😅 this thing is a rocket! Keep up the great work brother much respect!
tata1293
But maybe that´s also Part of the Problem. When the Car gets a little lifted, the Wheels will instantly gain a lot of speed and reach the critical Point of the Foam. Connecting it to be a 4*4 like Kevin, planed should really help. To sum it up he could maybe try to set a max. RPM for the Motors to reach, depending on what Tire he is using? Really dont know if its possible, but it would make sense to me.
Once again... Get you some aluminum wheels. Drill some holes around them on the inner rim. Dip them in a rubber epoxy compound. The holes will allow the compound to bleed through to both sides and provide support while preventing ballooning. Let them run off and dry sideways for easy clean up and balancing. All you need is the right rubber epoxy compound...
That is actually really smart man, I hope he tries this
This, but make the wheels out of carbon fiber over aluminum.
i know it exspensive. but what about titanium rims
I'm so excited for Kevin. He's put so much work into this. I hope that it at least makes a full potential pass without mechanical failure.
Epic. I love your updates so dang much. Look forward to them every day!
You've got me frothing at the mouth Kev! Seriously can't wait for you to make history. You have invested so much time and money, it's going to happen xx
Hey Kev
love your videos!
your a big reason I am getting back into this, you absolutely have an awesome view of this hobby, it’s all for fun !!!
Best of luck to you on getting to that world record 👍🏻
Not sure if he mentions it later in the video but on the first dyno run the wheel itself under the foam tire is expanding as well. Maybe a wheel with stronger material and or more cross bracing inside would help keep the tire together longer.
I love your content. And your the one who got me into this gig. And I love it. Thank you!
Wow I’m really impressed by the machining of those parts, well done
Dyno is genius
Tip: Left handed drill bits are really good for rounded off screws. Instead of just drilling them out, 9 times out of 10 they grip and just thread the screw out.
Great video and interesting experiment and well documented foam test, definitely enjoyed that Kev.
Looking forward to seeing these run m, good like buddy 💪
I always enjoy youre way off presenting the video,so much energy and joi in what you are doing. Keep it up Kev🎉🎉🎉
Curious about fire sprinkler system. I've been a designer of fire sprinklers for years. i was intrigued when you mentioned your system.
is that a compulsory system? or did you install, or have it installed ?
Tires are critical for electric-motor cars, because they have to carry all the power. But crucially, Project Air's jet-powered car puts power directly into the air... its tyres are just for rolling and steering. So this is vital to crack for the motorcars to win
Love the enthusiaum Kev. Keep the videos comming.
Very cool experiment with the tire speed and strength. Thank you.
Have you considered modifying some skateboard wheels to fit? I guess you could mill out the centre’s to fit hubs inside, there’s a massive range of “A” hardness ratings to suit the grip you need plus I’m guessing the extra weight might help with stability?
Just a thought?
I think you should really consider larger wheels and then go with either foam or rubber. The larger diameter wheel won’t have as many rpm’s at speed, and you will deal with a lot less centrifugal force. Just build a body with big, smooth wheel arches, and mold them smooth. Sort of like the Batmobile. If you run a wheel that is 5” vs running a 2.5” wheel, it will have to spin 1/4 the speed as a 2.5” tire to cover the same distance in the same time.
Half the speed not quarter, circumference varies linearly with diameter, but yes, bigger wheels will help.
Well yes and no because much like a cutting bit the speed on the surface is linear. A reduction in weight/density might help but ultimately it's the tensile strength of the rubber that is the problem. I would suggest using a urathane wheel which can have a certain amount of deflection under load but is much stronger than rubber or foam.
These things are REALLY coming together nicely. Best luck on your next run. It's bound to be EPIC!
I like when you put your brilliance into test!
Tip for getting small bolts and screws out without stripping - Take your driver, and a hammer, put the driver into the bolt and hit the top of it with a hammer for a few sharp shocks. This usually "breaks the seal" and makes them much easier to turn without stripping
My question is: Why don't you use bigger tires? The bigger the tire, the lower the rpm for any given speed. Also, you forgot to blur a frame with the wheel when you were balancing it, so... I think I know what you're doing.
The surface speed remains high
Centrifugal forces
Raises the car off the ground as well and is more aerodynamic surface area
@@maxwellfrank4166wheels are covered and are narrower, so the frontal area(critical in this case) is actually smaller
Get ahold of good year
Seeing that start up test was amazing, can't imagine in person. Craziest rc rig I have seen by far, makes me think of the massive jets or large helicopters it's on another level dood.
Kev, I have never seen you doing so much science in your videos before. This is awesome. Science is what gets you to 250 mph. It was never gonna be stupid amounts of horsepower. Keep it up. This is amazing content.
Nothing from your tests indicate your wheels are better.
Another great video. Keep them coming. Can't wait till you get that car over 200mph
Totally awesome Kev cant wait to see this thing take flight 🤣
I love your vids Kev!
i love you so much kevin you are the reason i love rc :)
Absolutely mental u go brother
Had to pause the video real quick to mention the work bench Kev has and how he uses it. I have one similar and it's beat to crap lol. Nice to see someone taking full advantage of their work bench ❤. Love ya Kevin!
you are bang on kev with your tire design top-secret
awww just when i want sleep. aaaallright one more video kev!
We need the next part!!!!!!!!! ;-) thanks Kev
Absolutely brilliant Kev !!!!! 🌟🌟🌟🌟🌟🌟🌟🌟🌟🌟
Wow I’m really impressed by the machining of those parts, well done. Wow I’m really impressed by the machining of those parts, well done.
Cant wait 4 Part 2🤩💪
Holy awesomeness!!! I think you are going to succeed!!! I also think the people who commented about the wheel/tire design are on to something. It is pretty crazy how much the rim itself expanded.
Sounds awsome like a drone!
Excellent looks like the new wheels will do the trick 🚀😁👌 hopefully you'll be celebrating next time Kev 🎉
this is great content. im so excited with this car
Awesome as always
Fair play David’s scorched parts are absolute quality I’m buying them as well 👍👍👍👍👍. First class
Oh nice you took my advice on the bench testing 😊
Can't wait to see it go down a proper drag strip!!!! Much smoother and way stickier!
Have some of the track adhesive on hand to help out with grip... I wonder if wheel slip is contributing to tire destruction? The tires are putting a lot of power down, and they must be slipping and getting damaged, especially as wind resistance increases.
👍 hell yea!
Love your vids man
outstanding!
Really nice RUclips channel I like how you do honest reviews because you don't get sponsors by the RC companies
Love the video kev 😊
you're the best Kevin
I think your vids are great! Always watch. I agree with the commenters it’s the actual wheel that’s letting the tyre down. A solid thin wheel may be the go. Good luck, get that record.
I like to think of Kevin as the late Rik Mayall of RC. THE Brit we love to watch 🇬🇧
your so right
Those are some highly satisfying parts right there
ITS A GREAT DAY WHEN KEV POSTS! 🎉🎉🎉
Those scorched parts knuckles are a work of art!
i really enjoyed this video
Really good video as always 😀😀 Greetings from Sweden
Amazing how the tires expanded.
Looking forward to see how you get on with them kev👌
Good luck, kev. Hope you get that record
Grate Video
Can’t wait for there next run
Great video
You make the best rc fast car project in world 💪🔥 you are the best and most fun rc youtuber in the world!!!
Nice Kev 🤩👍🏻
Niceeee. Need me some of them wheels
There can be only ONE Kevin Talbot. Never mind what James and Raz are up to.....GET THAT RECORD!!!👍🤴👍
Kev!!!
Get yourself a set of reverse twist drills for removing screws where you've rounded the hex off. As they bite in they unscrew your damaged screws. Easy peasy.
Kev has this in the bag
Love the vid
love this video..Kevin woke up and said "I can do science me"
I love your videos
Awesome
It's good you are trying your own design. Should be interesting to see if it's a world record breaker. Looking forward to it
This is gunna be goood 👍
Best of luck Kev
Hey Kev. Great video. But I like it when you go BOOOOM and what ever you were doing is done. That is SO cool man
Send it Kev!!
Lookin good Kev, those mambas look and sound mean. Get that world record and launch that sausage to the moon!
Go on Kev
Good luck bro hope you smash the record,I was reading the comments and someone mentioned the metal ring on the inside of the rim. I think that is a great idea. Or aluminum rims with your prototype tires on them.
Wow😱😱😱❤️❤️😂👏🏽👏🏽👏🏽 speed and powah!!!! 250mph+ in the bag. Most definetly beating the 220mph current record. You will have both offroad and on road rc speed records welldone Kev 🎉🎉🎉
I liked your cub cadet invention 😊😊😊
Good luck!!!
I dont know how to make a top speed build but it sure is fun to watch!
*_Michelin or Pirelli needs to make speed run tires for RC cars!!!😅🤣🤣_*
Quad motor is insane!!
3:56 Carnage 😳 Wasn't expecting that 😂
I can't wait to see this break some records.
Two suggestions, as others have mentioned the plastic deforming is a definite issue, for something light weight and tough you could try having the wheel printed in carbon fiber filament which might hold together better and still be light and cost effective. Also have you tried a harder durometer rubber? Awesome videos, thanks man!
This is my favorite video so far. Those tires that deformed
But didn't fly apart have potential. Stronger stiffer wheels to hold their shape.
Mans making the world most intense electric skateboard
Love your videos I wish I could have seen your monster truck show and you should visit Canada 🇨🇦
You should put a rubber O-ring or some thin-cut fuel tubing between all the ball links and rod ends to remove all the slop and also make them more precise feeling. The speed sausage is so bad arse, Kevin!
Insane, amazing but insane
The speed sausage is scary on the bench 😮 it sounds fast as fook 💪 best of luck with the record 🤞