My husband and I look forward to watching your videos. Thank you for taking the time to make them. Enjoy this beautiful holiday season. Merry Christmas & Happy New Year. I’m going to call my husband in and let him know you’ve posted a video, that will make his day. 😁 Always good to see you. ☀️🚤🌴
I like to use Tupperware for wiring. Mount the fuse blocks and such inside the bottom of a Tupperware container right to the boat. Cut holes to run the wires then silicone around them. Then when done you can put the lid on. Easy and waterproof. You can pop the lid to access it.
My Minnkota trolling motor did the same thing but I smacked it with the handle of a screwdriver and broke the magnet 🧲 so I got a used motor Guide brute 76 LB thrust 12/24 volt it came with two older fish finders that work fine for 100 bucks no problems anymore 👍🏻🤘🏻
Did you set the armature to get most speed? With blade off, loosen the 2 bolts so you can turn it. Turn it on turn the casing until the shift turns at a higher speed and that is the set point. If you already did this, just ignore. Like the videos.
Ya wanna come up & go ice fishing in the upper peninsula of Michigan the 24th & 25th? We even got a foot & a half of the white stuff & it was snowing like crazy just after dark this evening. I will take it as a YES that you will be here.😅
Hey nice to see you made a new post I went to the Everglades fishing last week and all I caught was a 13 inch Cichlid Mayan and it weighed 1 and a half lbs and bad that was the biggest I've caught yet I don't know how big they get catch you next time
Don’t let your RV Park neighbours know about your maintenance skills cause watch out, you’ll be swamped with requests and … let with no time for fishing. 😎
Fisherman aren't going to give up there spots.thats why I coming down there and me and you are having a cold one and a fat one.i bring the green pumpkin sinkos and trd,s and we will nail the bass.they will be asking us where we got them.and mom,s the word
Hahaha funny you mentioned the green sinkos. I cleaned out my tackle box a few hours ago and sniped the heads off the green sinkos so I could use them again! C U when U get here. Happy Holidaze!
hello,do work on other peoples outboards, i have a 2000 johnson 25hp with a 30hp carb,cant get it to run right,see you have plenty experience with these,i live here in ocala,let me know,thank you
I have an older 7” Garmin GPS Map sitting in the garage I’d be happy to send you, GPS/Fish Finder works but the SD card port broke so I replaced it few years ago with a new unit. Not sure how to PM/Email you on you tube.
@@Adjustedpriorities Hey. just got the box! They dropped it off at the wrong lot a day or 2 ago, they can't read! Hahaha anyway I was thinking, thats a pretty big box for a fisfinder- WOW! HAHAHA ! Thanks! I'll put one on the front, back and both sides of the boat! Hahaa! Can I send you some cash for shipping? LMK! Thanks again and have a great Christmas!
@@THISOLDOUTBOARD1 hey man glad you got the package, don’t worry about the shipping just hope you get some use out of the stuff was just collecting dust in my garage. Merry Christmas!
1/16 oz to 1/8oz bullet sinker on main line then attach a barrel swivel to main line attach a piece of line 15"-2' long piece of lineto the bottom of the barrel swivel then at the bottom of that leader attach a #4 wide gap hook now tear a nightcrawler in half attach it to the hook DONT ball it up leave worm so it looks & swims like a store bought pladtic worm then use a syringe to puff the crawler full of air drag it with the trolling motor on low speed in 15fow to 30fow OUTSIDE of the weedline in the sand & mud bottom. Basically a Carolina rig WITH MEAT. ITS DEADLIEST RIG I HAVE EVER USED. Now go try it come back & show us the fish pictures😊 Find deep points or sunken islands & l GUARANTEE EVEN WHEN NO ONE ELSE IS CATCHING FISH YOU WILL BE CATCHING THEM. VERY VERY VERY DEADLY LIVE RIG SET UP.
Let out just enough line to get it to the bottom your basically fishing just over the side of the boat at a 45° angle keep the rod tip pointed right at the lure that way it pulls through the weeds if you hold the pole sideways it WILL catch the weeds
This is Perry, the guy that gave you the old Evinrude from Jacksonville Florida. I got a 18 horsepower Evinrude I believe in 1972, let me get a email where I can let you know some of the parts I'm looking for. It's all original, pull start only. I got it on the original boat it came on. 1972 Orlando clipper, Skipper model, 12 ft 10 in. Nice little boat I'm going to fix it up. It's rated for 30 horsepower
Hey Perry. Thanks I appreciate that! I got a couple of motors from Jacksonville. Anyway I really don't do parts or have much in spare parts especially for that year. And if I do its like Gold! Hahaha! I'm working on a 71 20 hp right now and then a 72 25- so there's not much to go around. Thank goodness they mass produced the parts for these things, they're usually available on marineengine.com or boats.net and what I normally do is get them on ebay- sometimes they're a little bit cheaper there. If you get a chance post some videos! I'd luv to see it! I've got a 56 Clipper 14'. Let me know and anyway I can help out with getting her up & running, just ask! Thanks again & Happy Holidays !
I'm impressed. You have made friends at your new park already!!! That proves you are a nice person!!!
Yeah- sometimes too nice- volunteered to help hang xmas lights and it turned into a Griswold Christmas! Hahaha Happy Holidays !
I'm coming to see you friday. Merry Christmas brother.
Merry Christmas!
Great job on the woman's deck. You are definitely good with your hands. The make-shift bracket looks sturdy and will hold for a long time. Good video!
Hey, Thanks for watching. Stay tuned!
My husband and I look forward to watching your videos. Thank you for taking the time to make them.
Enjoy this beautiful holiday season. Merry Christmas & Happy New Year. I’m going to call my husband in and let him know you’ve posted a video, that will make his day. 😁
Always good to see you. ☀️🚤🌴
Hey! Thanks for Tuning in! Happy Holidays !
Beautiful weather. Happy holidays
Same to you!
Nice job on the porch…good video 👍
Thanks for tuning in! Happy Holidays!
Another great vid! Happy Holidays!!!
Thanks for tuning in! Happy Holidays !
I didn't know there was an armature replacement for the trolling motor....great videos
Yeah its sweet! trollingmotorparts.com or ebay- Thanks!
Hope you have a wonderful Christmas and new year TOO. 👍
Happy holidays to you too!
I sure wish you would make a video of you Crappie fishing with minnows at night. Glad to see you’re getting settled in 👍🙏
Yeah. Now you're talking my language! Happy Holidays !
Get after them crappies!
Mity fine if you like mild fish.
Boat is coming along nicely!
Good luck fishing!
Thanks for tuning in! Happy Holidays !
Coming along TOO
Happy Holidays ! Thanks!
Back at you
I like to use Tupperware for wiring. Mount the fuse blocks and such inside the bottom of a Tupperware container right to the boat. Cut holes to run the wires then silicone around them. Then when done you can put the lid on. Easy and waterproof. You can pop the lid to access it.
Yeah- I like that Idea! Thanks & Happy Holidays !
Happy holidays ,!!!
Same to you!
Merry Christmas 🎄
Same to you!
My Minnkota trolling motor did the same thing but I smacked it with the handle of a screwdriver and broke the magnet 🧲 so I got a used motor Guide brute 76 LB thrust 12/24 volt it came with two older fish finders that work fine for 100 bucks no problems anymore 👍🏻🤘🏻
Sounds Sweet! Happy Holidays !
Did you set the armature to get most speed? With blade off, loosen the 2 bolts so you can turn it. Turn it on turn the casing until the shift turns at a higher speed and that is the set point. If you already did this, just ignore. Like the videos.
Thanks for tuning in!
Ya wanna come up & go ice fishing in the upper peninsula of Michigan the 24th & 25th?
We even got a foot & a half of the white stuff & it was snowing like crazy just after dark this evening.
I will take it as a YES that you will be here.😅
Can't afford a snow suit! Hahaha Happy Holidays Have Fun!
Hey nice to see you made a new post I went to the Everglades fishing last week and all I caught was a 13 inch Cichlid Mayan and it weighed 1 and a half lbs and bad that was the biggest I've caught yet I don't know how big they get catch you next time
I had to look that one up! Now I know what they're called. That was a big one! Hahaha Happy Holidays !
Same to you hope you have a awesome Happy Holidays 🙏😊
I've noticed you don't fish for catfish. I love fishing for cat's and they are one of my favorite tasting fish!!
Hey. Yeah not since I was a kid. They are tasty! Happy Holidays !
Don’t let your RV Park neighbours know about your maintenance skills cause watch out, you’ll be swamped with requests and … let with no time for fishing. 😎
Too late- Hahaha! That's why I haven't put any vids up lately. Happy Holidays !
1001 uses for those seat backs
Hahahaha! Happy Holidays !
Get them crappies in the boat
It will happen! Happy Holidaze!
Fisherman aren't going to give up there spots.thats why I coming down there and me and you are having a cold one and a fat one.i bring the green pumpkin sinkos and trd,s and we will nail the bass.they will be asking us where we got them.and mom,s the word
Hahaha funny you mentioned the green sinkos. I cleaned out my tackle box a few hours ago and sniped the heads off the green sinkos so I could use them again! C U when U get here. Happy Holidaze!
hello,do work on other peoples outboards, i have a 2000 johnson 25hp with a 30hp carb,cant get it to run right,see you have plenty experience with these,i live here in ocala,let me know,thank you
Hey. Thanks for tuning in! Not at this time I'm to backed up!
Where did you get die hard battery's that used to be only sears but they closed did Walmart buy out sears ?
advance auto parts sells diehard in buffalo area.
Awww got ya, cool .
Yeah Advance AP. I've had a few of these batteries and they all had different stickers on them! Happy Holidays !
I have an older 7” Garmin GPS Map sitting in the garage I’d be happy to send you, GPS/Fish Finder works but the SD card port broke so I replaced it few years ago with a new unit. Not sure how to PM/Email you on you tube.
almost forgot- Happy Holidays !
Good deal, I’ll get it sent over to you. Merry Christmas!
@@Adjustedpriorities U DA MAN!
@@Adjustedpriorities Hey. just got the box! They dropped it off at the wrong lot a day or 2 ago, they can't read! Hahaha anyway I was thinking, thats a pretty big box for a fisfinder- WOW! HAHAHA ! Thanks! I'll put one on the front, back and both sides of the boat! Hahaa! Can I send you some cash for shipping? LMK! Thanks again and have a great Christmas!
@@THISOLDOUTBOARD1 hey man glad you got the package, don’t worry about the shipping just hope you get some use out of the stuff was just collecting dust in my garage. Merry Christmas!
1/16 oz to 1/8oz bullet sinker on main line then attach a barrel swivel to main line attach a piece of line 15"-2' long piece of lineto the bottom of the barrel swivel then at the bottom of that leader attach a #4 wide gap hook now tear a nightcrawler in half attach it to the hook DONT ball it up leave worm so it looks & swims like a store bought pladtic worm then use a syringe to puff the crawler full of air drag it with the trolling motor on low speed in 15fow to 30fow OUTSIDE of the weedline in the sand & mud bottom.
Basically a Carolina rig WITH MEAT.
ITS DEADLIEST RIG I HAVE EVER USED.
Now go try it come back & show us the fish pictures😊
Find deep points or sunken islands & l GUARANTEE EVEN WHEN NO ONE ELSE IS CATCHING FISH YOU WILL BE CATCHING THEM.
VERY VERY VERY DEADLY LIVE RIG SET UP.
Let out just enough line to get it to the bottom your basically fishing just over the side of the boat at a 45° angle keep the rod tip pointed right at the lure that way it pulls through the weeds if you hold the pole sideways it WILL catch the weeds
Sounds good all except the syringe part- yuck! Hahaha. Happy Holidays !
@@THISOLDOUTBOARD1 that's what lifts the worm off bottom into fish's view
Keep that trolling motor going…….New ones have 3 zeros in the price…….
Yeah I knowc crazy! Happy Holidays !
@@THISOLDOUTBOARD1 Happy holidays…….
I still think I would of got a old 50' OMC 7.5 or 10hp no Battery charge and more reliable
One of these days! Happy Holidays !
This is Perry, the guy that gave you the old Evinrude from Jacksonville Florida. I got a 18 horsepower Evinrude I believe in 1972, let me get a email where I can let you know some of the parts I'm looking for. It's all original, pull start only. I got it on the original boat it came on. 1972 Orlando clipper, Skipper model, 12 ft 10 in. Nice little boat I'm going to fix it up. It's rated for 30 horsepower
Hey Perry. Thanks I appreciate that! I got a couple of motors from Jacksonville. Anyway I really don't do parts or have much in spare parts especially for that year. And if I do its like Gold! Hahaha! I'm working on a 71 20 hp right now and then a 72 25- so there's not much to go around. Thank goodness they mass produced the parts for these things, they're usually available on marineengine.com or boats.net and what I normally do is get them on ebay- sometimes they're a little bit cheaper there. If you get a chance post some videos! I'd luv to see it! I've got a 56 Clipper 14'. Let me know and anyway I can help out with getting her up & running, just ask! Thanks again & Happy Holidays !
Beautiful weather. Happy holidays
Thanks for tuning in!