Wow.. Usually when I think of "Spark, air and fuel" I think; spark plugs, fuel line, fuel pump, MAP sensor, air filter, MAF sensor. But you just brought up a whole list of things I never would have thought of
Honesty I thought he was like Scott, but this man is in another level, great presentation and great information, love the pictures it gives a very wide idea of what to look for in case of DIY work, sir you sold me out today you gained a new subscriber, can't compare this man to other people man this man knows his thing to detail. Stay blessed.
@Daniel Brockman Is that the only problem? My tsx was having issues similar to that except all the lights kept coming on except the check engine light on. Come to find out it was a bad battery cord.
Excellent! Thanks for taking the time to be thorough. I am having issues with an older car hesitating when accelerating and didn't realize all that could affect it. I like your presentation, straight to the point.
Exactly. This video is perfect for people who don’t understand cars. They take them in with something they perceive as simple, ask for a ‘tune’ lol… yet look at what checks mechanics have to go through, and when your doing that many checks, your bound to find something else. Some of those things only take a 5-10 minute check. Some jobs 1-2 hours. But videos like this help casual mechanics understand the Pros, and try not to give them a hard time lol
Thanks Paul, I’ve looked at loads of those forum’s...useless...! You and Scotty are the only ones giving this advice to check and clean Mass Airflow Sensor for poor acceleration...what I call a flat spot...! Cleaned the MAP sensor on my daughters 2009 Vauxhall Astra 1.6 Sxi and it as done the trick. I cleaned it with WD40 Contact Cleaner which worked but, it didn’t evaporate...I had to run the hairdryer through it to dry it out. The sensor on this one has only two contacts and does not appear to be removable from the air filter hose...you can see it though from the filter end though and reach it with the tube. Hope this is useful to other people searching the internet for idea’s. By the way, it also seems to have fixed the Rev lag when changing gear, something that I saw on one forum as “perfectly normal on Astra’s”. Thanks Paul
Just bought an old ranger. My noodle is over the top blabbergasted at how many little bits and pieces serve their own purpose. Thank you for laying it all out for us women learning to do it ourselves. 👍
Thank you for the long list of what could possibly cause engine performnce issues. Lot of people think fixing or replacing a part or two can fix the issues but it's not always the case. That's why the problem must be diagnosed rather than blindly throwing parts at it. So many components and sensors work together to send the accurate amount of data to the ECM, so that the ECM can send the right ratio of fuel to gain the maximum cobustion output. Any diffiencey can disrupt the proper combustion process causing performance issues overtime. Engineers have spends decades to come up with a product that we now take it for granted. It's not a horse or a bike. This is a product of science not a miracle.
This has bar far been the best video I've seen all day!!!!! I had all spark plugs and coil for cylinfer 3 being as though thats where im having misfire, replaced and fuel injector as well and check engine light still on but this video broke it way down....Thanks
just found this. your methodically sequential description approach is so refreshing. No long BS stories like many other channels, about "there was this one guy I knew.." Thanks man!
I'm a widow and I'm living on Social Security.. And I need to get a little driving job so I've got to get this car up to speed And I live in Arizona and the summer is coming right fast.. Thank you Paul! 🤗😇
Thank you sir I do have problem with excellarateting problem, and I change the oilfilter and the fuel pump,but still problem not solve ,and I decided to check out RUclips channel try to find the solution, and what you have mention with others ,make sense to me,and I'm really appreciate, with all the advice from this channel, thank you,
I felt that way too. I identified several parts, sensors and, fixes which i have experience with but, the stuff i don't know, i'm going to have to ask you guys for help with.
🎉want to say Thank you I used your video to fix my daughter's car , my fiancee past away 6 months ago and I had to do it all alone with no knowledge of any but I got her car up and running . Thank you so much !
Very detailed and easy to follow for us who DIY, you helped me with your video about cleaning the mass air flow sensor, excellent work, Paul, keep it up!
Exactly. If you watch enough RUclips instructional videos and make the time to practice what you watch, then you will one day hear someone call you a "D-I-Y GUY". Never give up in the beginning. There were times I would have videos playing at night in the background as I slept. Wake up to an answer I heard in my sleep. My next DIY Project is personal credit.
Paul, you are a good man for sharing us youre hard documentation about engine hesitation. This information will help anyone who goes with his car to a mecanic and the owner will know if there is a scam and he will pay for changing something else. Great job mate. Your video will help even the mecanics.
@@trini_boi2414 yea i agree with you. Now im tripping out cus if its not what i think it is now i have a huge list that i have to go thru to figure it out
Good and thorough. I had no idea there could be this many causes. But they mostly make sense. The water in fuel seems unlikely to just be affected during acceleration, but I'm just an apprentice.
Believe it or not, where I live, water in fuel is a common issue which affects the entire engine badly. Paul did this thoroughly, like all of his videos, helped me few months ago with a problem which a few mechanics failed to determine so I did it myself.
Thanks for the info. The scan tool is essential on these newer vehicles. I grew up in the 50's where changing plugs usually took care of the hesitation. But now..... I like my 1967 c20 best! God bless.
That’s a lot to take in. I was just looking at a issue I have with my car and I’m sure one of these would be the culprit. The thing is which one. I’m no master mechanic by a long shot but watching this at least give me some sort of idea. Well sort of. Brilliant video and God knows what we would do without RUclips and people like this, making the time and effort to share all their knowledge. Nice one. 👍😁
Of course one of these will be your problem. Anyone can open a book and list anything that could ever go wrong with a car. The whole point of being a competent tech is to pinpoint issues so you don't have to consider every random unlikely possibility. If you are still having the problem, list the details. I can't make any promises, but at the very least, I should be able to show you how to eliminate 95%+ of the issues on his list.
Just wanted to say thank you for this video. I know a little about cars but when I went through your whole video and got to the distributor information, it dawned on me that it must be the timing. Thanks again
Most thorough video ever! Musta taken forever. Thanks for takin the time to do it so well! Nothin like modern car possible failures eh? Im dealin with issues on my 94 mustang currently...
I see a lot of people giving you grief I’m just naming everything in the car and um, I ACTUALLY LIKE IT! I’ve been looking through a lot of videos searching for something that just basically tells me everything that’s in the freaking car and no one has great pictures like the ones you’re showing here which makes it a little bit easier to understand when people are talking about oh there’s this piece in this corner under this thing with the thing in the thing here’s a weird angle to it. I really enjoyed this video, thank you very much. 💜💜💜
You summed up the operations of the engine very well! Explanations of each system make troubleshooting easy for a non mechanic person (like myself) to open the hood and save a few bucks! Thank You! Do you have any videos on changing an alternator (only) belt? Without removing the power steering & a/c belts. 2000 crv.
Outstanding video! Clear and concise! Easy to follow and titles for each description and numbered areas to look for that could be the issue with your car. Plus, it’s easy to take screen shoots for review later due to the headings and subheadings!
This video has valuable info on parts that work together to make the car operate smoothly. Not necessarily one can or be able to check that long list, but it teaches you all the car components, their names & their role in a vehicle.
Yes... spend whatever it cost to buy a '64 Chevy Impala running or not... invest another 5K to make it run right and when it hesitates, farts or burps you will only have to check 3-4 things. You cannot buy a new car and take care of it yourself today.
The MAF sensor is 90% of the time the reason... New one would help but cleaning the old it won't work... I got mine new Bosh Maf for 120€... For the hesitation, it might be the air system, fuel system or even the spark plugs... These are the main reasons... Thanks for the explanation...
so whats the more common reasons for hesitation mostly at higher speeds for my e46 330ci? i have a new oem MAF and have smoked tested tf outa my car, only found a super super super small leak coming from one of the PCV hoses at the connector.
Great video..super thorough. My issue is , my sons Hyundai has no check engine light on, and no scanner codes coming up. Took it to 2 places, neither could figure it out, or didnt want to.
So basically, if any parts or sensors aren't working properly, it will cause a lean air/fuel mixture, engine misfire and the check engine light will come on. Good to know, sounds like an Easy Fix!
You forgot to mention the most common intake system component of fuel injected cars. The idle air control valve is what really makes cars hesitate and not start along with stalling.
Thank you for the help and knowledge, we've been trying everything to get the idle fixed on my 1998 Silverado 1500 vortex. I'm sure with your video we can get it done!
Yes, he made another great instructional video, and it should help guide you. Also, check the coil & IAC, for your idle issues. I just replaced the coil on my 1989 Chevy K2500, now idles much better, hope this helps.
u are a gem - I appreciate the way you put ur video together - thank u so much, ur the 1st video that I've seen that makes the most sense, its never the same thing for different cars - I will return to this video many times im sure to double check myself. U def got my like!
Bought a 2006 chrysler crossfire 3 days back. Been stuffing up the day I got it. These issues as stated in the video. Codes are telling me it's the MAF fingers crossed it's that easy
@thisorthat7626 we might have fixed it. Cleaned all the air intake stuff, did the MAF and pretty much every electrical connection you can think off. Still no luck. Sent up to the local service station bought some fuel injector cleaner. Ran that through the petrol tank and now it's driving like a dream. The last owner had it for 7 years (80 year old lady, and she drove it pretty slow for short drives too) hopefully problem stays fix lmao (also the air filters were full of bug bits, feathers and sooooo much dust it was insane)
For a diesel engine: Blanking off the EGR was the fix on my diesel. The exhaust gas was screwing up the fuel mixture and causing a very very bad hesitation and a big puff of black smoke out the exhaust when trying to take off from a stand still. The ECU was not compensating for this and that hesitation was becoming dangerous. The blank plate was the only way to fix this problem. How can an engine be Euro 5 compliant when that happens? Maybe the testing for this is compliance is suspect? Until Foton/Cummins come up with an ECU update to compensate for this the blank plate is staying in place in my car!!!
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Not what I understand as an 'Easy Fix' but very informative, keep up the good work.
Wow.. Usually when I think of "Spark, air and fuel" I think; spark plugs, fuel line, fuel pump, MAP sensor, air filter, MAF sensor. But you just brought up a whole list of things I never would have thought of
Honesty I thought he was like Scott, but this man is in another level, great presentation and great information, love the pictures it gives a very wide idea of what to look for in case of DIY work, sir you sold me out today you gained a new subscriber, can't compare this man to other people man this man knows his thing to detail. Stay blessed.
👍😊
Amen🙏
lol i mean he is good, but Scotty is a god please respect him
Thanks, your video make me park my car in the garage and start riding my bicycle.
Exactly! A bike has less issues than replacing all those parts!😂
Lmfao 🤣🤣🤣🤣🤣
😂
Well, if it's a Harley, you'll have the same problemy.5 point for started acting up.I took my bike to Walmart and back out.Do you wan to start
Thorough, good, concise, teaching with excellent use of language. Thank you very much!
This is the most informative and comprehensive video on RUclips related to Engine Stalling and Hesitation. Thank you sir
Ajab Khan Wow, thank you! 👍😊
You're welcome, keep up the great work. Really appreciate it :)
Ajab Khan 👍😊
Everything is fucked!😂
Thanks for taking your time collecting all this data and sharing with us. Your video deserve my like.
Must be related to Scotty Kilmer! Lol
Jose Betancourt yes for sure
Loo
Jose Betancourt Scotty would use his $5 K scan tool & it would tell him exactly what the problem is. 🐴🐈
He's a" knock off" of Scotty Kilmer😒
LOL
This is possibly one of the best videos I’ve seen in a while!! Perfect way of explaining everything in detail.👌🏾
I usually don't like over detailed videos , but it's always on point
I never heard Check Engine Light so much in my life lol
and not so much "lean mixture" in 5 years.
This guy even needs to talk about seatbelts
Ikr lmao😹
@Daniel Brockman Is that the only problem? My tsx was having issues similar to that except all the lights kept coming on except the check engine light on. Come to find out it was a bad battery cord.
😂😂😂😂😂😂😂
Excellent! Thanks for taking the time to be thorough. I am having issues with an older car hesitating when accelerating and didn't realize all that could affect it. I like your presentation, straight to the point.
From video.
Q: What can cause this hesitation?
A: Just about everything and anything in your car.
😆😂🤣😅😂😅😅👍
Seriously
Forget it I'll just fill up the tank with water
Maf aivc...vacum leak...spark plugs...dirty fuel injectors. Blown throttle gasket. Pain in arse is final. Job
Exactly. This video is perfect for people who don’t understand cars. They take them in with something they perceive as simple, ask for a ‘tune’ lol… yet look at what checks mechanics have to go through, and when your doing that many checks, your bound to find something else. Some of those things only take a 5-10 minute check. Some jobs 1-2 hours. But videos like this help casual mechanics understand the Pros, and try not to give them a hard time lol
Thanks Paul, I’ve looked at loads of those forum’s...useless...! You and Scotty are the only ones giving this advice to check and clean Mass Airflow Sensor for poor acceleration...what I call a flat spot...! Cleaned the MAP sensor on my daughters 2009 Vauxhall Astra 1.6 Sxi and it as done the trick. I cleaned it with WD40 Contact Cleaner which worked but, it didn’t evaporate...I had to run the hairdryer through it to dry it out. The sensor on this one has only two contacts and does not appear to be removable from the air filter hose...you can see it though from the filter end though and reach it with the tube. Hope this is useful to other people searching the internet for idea’s. By the way, it also seems to have fixed the Rev lag when changing gear, something that I saw on one forum as “perfectly normal on Astra’s”. Thanks Paul
👍😊
Just bought an old ranger. My noodle is over the top blabbergasted at how many little bits and pieces serve their own purpose. Thank you for laying it all out for us women learning to do it ourselves. 👍
Thank you for the long list of what could possibly cause engine performnce issues. Lot of people think fixing or replacing a part or two can fix the issues but it's not always the case. That's why the problem must be diagnosed rather than blindly throwing parts at it. So many components and sensors work together to send the accurate amount of data to the ECM, so that the ECM can send the right ratio of fuel to gain the maximum cobustion output. Any diffiencey can disrupt the proper combustion process causing performance issues overtime.
Engineers have spends decades to come up with a product that we now take it for granted. It's not a horse or a bike. This is a product of science not a miracle.
Choghoree Karakorm 👍😊
🤯
I'm waiting the EASY DIAGOSE video to come out. I should add a can of fuel stabilizer to the tank and unhook the battery. It might be a while. 😉😉
Very informative and you realize if one is keen with one's car, then you can easily diagnoze engine problems
Agree
wow wow wow slow down buddy I'm still on number 3 you are making me in just wanting to buy a new truck
Agree. Lol
😂😂😂
Just hit 'pause'. Go back if you have to. Don't make him talk as slow as you think. Thing would be 10 hours long if he did.
shaggybreeks 😂😂😂 right. Why should all us fast thinkers suffer when there is a pause button.
hhahahaha
Great reference video. I really appreciate the knowledge, time and effort you put into making this. Thanks for the help.
👍😊
I thought this was easy imaging changing all these sensors it would be better to buy a new car 😅
He sounds like Scotty kimer
Brilliant video I may do the work myself and save some coin 👍🏽
I replaced all that sh it...cost me 20 thousand bucks. Still broken.😢
This video made me go and get a pen and paper. He is a true teacher at heart.
This guy looks like the dad from that 70’s show, sounds like the helpful diy mazda guy, and has a scotty kilmer vibe all at the same time
And if you don't do as he says he will put a foot up your ass.
Exactly what I was thinking.
Damn this guy hit on the nail... Was thinking of Scotty as well.
And how he kept rambling on about all the possibilities in the video just like the show😂😂felt like im getting lectured
I was kind of hoping I'd hear him say "Rev up your engine, DUMBASS."
This has bar far been the best video I've seen all day!!!!! I had all spark plugs and coil for cylinfer 3 being as though thats where im having misfire, replaced and fuel injector as well and check engine light still on but this video broke it way down....Thanks
Cylinder
I changed the spark plugs, coil pack and mass air flow sensor and it still womt go pass 35 mph
K Dawg might be your catalytic converter
@@444aintlifegrand well i just took off the electric plug for #4 fuel injector and it acted like it wanted to kill
@@444aintlifegrand Guess what it is the Cataylytic converter thanks fir helpung me out
I think my check brain light went on.
Mine is on all the time.
LOL
You’ve just showed me everything that’s going to soon happen to my vehicle, thank you so much 🙏🏼
just found this. your methodically sequential description approach is so refreshing. No long BS stories like many other channels, about "there was this one guy I knew.." Thanks man!
I'm a widow and I'm living on Social Security.. And I need to get a little driving job so I've got to get this car up to speed
And I live in Arizona and the summer is coming right fast..
Thank you Paul! 🤗😇
Hey I'm a widow too
Text me 540 456 1953
Halfway into this video and i just subscribed ! Can't explain how much apreciate the knowledge.
Jose Olvera 👍😊
I thing this's more important video and explicitly ever...About engine fail & hesitation...THANKS.......Appreciate
Most comprehensive video I've watched. With all the possible causes here, I don't feel so bad now when I can't diagnose a problem.
Thank you sir I do have problem with excellarateting problem, and I change the oilfilter and the fuel pump,but still problem not solve ,and I decided to check out RUclips channel try to find the solution, and what you have mention with others ,make sense to me,and I'm really appreciate, with all the advice from this channel, thank you,
Excellent! Well organized and free of excessive "personality". For those who say it goes too fast, PAUSE it, derpski.
Thanks!
Hey Punk are you referring to Scotty?
After watching this, I feel that there will be a test on Friday.
Flora There will be! LOL! 😂
best comment!
Im weak 😂😂😂
I felt that way too. I identified several parts, sensors and, fixes which i have experience with but, the stuff i don't know, i'm going to have to ask you guys for help with.
Dead 😂
Thank you. I've got a lot of info from you. Why did it take me so long to find this video. Any way thanks again buddy. Keep doing your thing.
Juan Carbajal 👍😊
🎉want to say Thank you I used your video to fix my daughter's car , my fiancee past away 6 months ago and I had to do it all alone with no knowledge of any but I got her car up and running . Thank you so much !
This man is legit at first I thought he was Great Value Scotty Kilmer but nall he is his own man and highly educated ‼️ New subscriber here‼️
Very detailed and easy to follow for us who DIY, you helped me with your video about cleaning the mass air flow sensor, excellent work, Paul, keep it up!
K
Exactly. If you watch enough RUclips instructional videos and make the time to practice what you watch, then you will one day hear someone call you a "D-I-Y GUY".
Never give up in the beginning. There were times I would have videos playing at night in the background as I slept. Wake up to an answer I heard in my sleep.
My next DIY Project is personal credit.
I think it might have been a much shorter video if you told me the the parts of my engine that could NOT cause this symptom.
He simply listed all components of the vehicle xD
Paul, you are a good man for sharing us youre hard documentation about engine hesitation.
This information will help anyone who goes with his car to a mecanic and the owner will know if there is a scam and he will pay for changing something else. Great job mate.
Your video will help even the mecanics.
Thanks Dan
It didn't help me it just made me stressed even more😂
@@trini_boi2414 yea i agree with you. Now im tripping out cus if its not what i think it is now i have a huge list that i have to go thru to figure it out
@@Eddie-0102 same here and the bad part you might have to buy parts and put them on to see if that's the problem which could run up a hefty bill😩
@@trini_boi2414 i just put new spark plug cables and that fixed the problem.
Amazing video, most would say “it could be anything” instead you listed out everything! Thank you
Thank you so much Scotty Kilmer Sr. Your the best.
Sincerly, your grandson
Scotty Kilmer lll
Good and thorough. I had no idea there could be this many causes. But they mostly make sense. The water in fuel seems unlikely to just be affected during acceleration, but I'm just an apprentice.
Believe it or not, where I live, water in fuel is a common issue which affects the entire engine badly. Paul did this thoroughly, like all of his videos, helped me few months ago with a problem which a few mechanics failed to determine so I did it myself.
if you don't me askimg, what part did you changed?
I JUST SAWED THIS CAR IN HALF
🤣🤣🤣🤣🤣🤣😭💥💥💥💥
"That's allot of damage!"
Probably its because of a divorce.😂😂
Thanks for the info. The scan tool is essential on these newer vehicles. I grew up in the 50's where changing plugs usually took care of the hesitation. But now..... I like my 1967 c20 best! God bless.
That’s a lot to take in. I was just looking at a issue I have with my car and I’m sure one of these would be the culprit. The thing is which one. I’m no master mechanic by a long shot but watching this at least give me some sort of idea. Well sort of. Brilliant video and God knows what we would do without RUclips and people like this, making the time and effort to share all their knowledge. Nice one. 👍😁
Of course one of these will be your problem. Anyone can open a book and list anything that could ever go wrong with a car. The whole point of being a competent tech is to pinpoint issues so you don't have to consider every random unlikely possibility.
If you are still having the problem, list the details. I can't make any promises, but at the very least, I should be able to show you how to eliminate 95%+ of the issues on his list.
@@AT-wl9yq much appreciated and cheers buddy. All the best 👍😁
After seeing this I've decided to become a Shaolin Monk so I could just fly to wherever it is I need to go.
😂
🤣🤣🤣
hahahhahha i guess he missed a couple more symptoms
Lol
Still waiting on “how to put your car back together again” tutorial
😂😂
🤣😂
🤣🤣🤣
Me to I'm lost
😂😂😂
Damn. Wtf 🤣 I need a new car basically 😂
This is the very best Video about hesitation issues I've ever seen. Thanks for sharing so much. Grettings from Venezuela. 🤔🤗🙏
Thank you so much for all the examples. Many more than I could think of and now I have so many more things to check. God bless you my man
You're legend mate.. cant believe how much I've learnt in 9mins.. 😎👌👍
👍😊
This is a great video. I definitely have an idea what my problem is now. Thanks.
This vdeo just contributed more misery to my car problems...thx alot man
Lol. I know. Now i have 39 problems wrong with my car.
Just wanted to say thank you for this video. I know a little about cars but when I went through your whole video and got to the distributor information, it dawned on me that it must be the timing. Thanks again
Most thorough video ever! Musta taken forever. Thanks for takin the time to do it so well! Nothin like modern car possible failures eh? Im dealin with issues on my 94 mustang currently...
Hi Paul, I really hand it to you guys!!
it's mind-boggling to me all the parts and all the systems on a car that can go wrong! :-( wow
After Watching this I bought another car..
At 1st he was acting like Scotty, but in the end he was Very informative. Even more so than scotty. There's many things that can cause check Engine.
Very helpful video. So many things could be causing this. Thx for the info.
I see a lot of people giving you grief I’m just naming everything in the car and um, I ACTUALLY LIKE IT!
I’ve been looking through a lot of videos searching for something that just basically tells me everything that’s in the freaking car and no one has great pictures like the ones you’re showing here which makes it a little bit easier to understand when people are talking about oh there’s this piece in this corner under this thing with the thing in the thing here’s a weird angle to it. I really enjoyed this video, thank you very much. 💜💜💜
👍😊 Thanks Natalia I really appreciate your comment. I have been called just about every name in the book for making this video.
All comments are positive yet in the only one that thought to like this video???
You did an amazing job on this and I thank you!
👍😃
ok im gonna find a nice cliff and accidentally give my car a lil push ;) thanks!!!
That's a good one. LOL!
Strait to the point. Nice video!!
Holy cow how many valves and ports are on these new dangled machines?
this is the best as can get with a little of knowledge and handy anyone can fix lots of small problems listening to this man
Wish you were near by, I need a good mechanic. That was wonderfully said and illustrated, I understood you clearly.
You summed up the operations of the engine very well! Explanations of each system make troubleshooting easy for a non mechanic person (like myself) to open the hood and save a few bucks! Thank You! Do you have any videos on changing an alternator (only) belt? Without removing the power steering & a/c belts. 2000 crv.
Outstanding video! Clear and concise! Easy to follow and titles for each description and numbered areas to look for that could be the issue with your car. Plus, it’s easy to take screen shoots for review later due to the headings and subheadings!
👍😊
That's what I did. Screenshot every different thing that could be wrong and I hit each one at a time.
I’ll just drive the car into the ocean, thanks.
🤣
😂😂😂😂😂
Lmao dead af it’s 2 am and I’m tryna fix my car 😂😂😂
😂
Thanks for the tip lol😹
This video has valuable info on parts that work together to make the car operate smoothly.
Not necessarily one can or be able to check that long list, but it teaches you all the car components, their names & their role in a vehicle.
1996 Lumina THANK YOU video saved me from expensive transmission service!!! it was my fuel pump!
Wufff, finally, I found an easy to follow tutorial!!! Now my car won’t start because I took my whole engine apart... tips anyone 🥺🥺🥺
Yes... spend whatever it cost to buy a '64 Chevy Impala running or not... invest another 5K to make it run right and when it hesitates, farts or burps you will only have to check 3-4 things. You cannot buy a new car and take care of it yourself today.
The MAF sensor is 90% of the time the reason...
New one would help but cleaning the old it won't work...
I got mine new Bosh Maf for 120€...
For the hesitation, it might be the air system, fuel system or even the spark plugs... These are the main reasons...
Thanks for the explanation...
0
so whats the more common reasons for hesitation mostly at higher speeds for my e46 330ci? i have a new oem MAF and have smoked tested tf outa my car, only found a super super super small leak coming from one of the PCV hoses at the connector.
@@ArekThorne a super small leak is all it takes
Gil I give up on DIY
Wow,,. Very nice. Your video has to be the best I've seen so far. Very informative. Very good. Keep up the good work.
Thanks! I really appreciate it.
I agree !
God bless you patriot❤. And thanks for teaching an old lady about old cars.
Great video..super thorough. My issue is , my sons Hyundai has no check engine light on, and no scanner codes coming up. Took it to 2 places, neither could figure it out, or didnt want to.
Thank the Lord for you Bro!!!!! Great Teacher!!!? Showing every possibly plus pictures and names!!!!!!!
I never knew so many things could cause an engine misfire and a check engine light 😵
Welcome to the world of incredibly complex engines.
Me too
Me either
Me also
Neither did I!
So basically, if any parts or sensors aren't working properly, it will cause a lean air/fuel mixture, engine misfire and the check engine light will come on. Good to know, sounds like an Easy Fix!
Best upload I've seen in a long time! Thank you for your time and efforts, it's appreciated!
Sir I never learned so much sitting on the toilet my entire life💯❗️Thank you❗️
You are a gem sir, God help you! Love the work and the organization that you put into your videos! Also I appreciate your clarity when talking!
So in general every single part in the car is faulty
Thank you 🙏 for taking the time to share this Video. Very informative.💯
Great infor. I fixed my F250 Super Duty miss fire based on his video, appreciated.
think ill just buy another car
Foreals lol
and I'm thinking of selling the car instead 😂
😁😁😁😁 good idea
I just put some black tape on the "Check Engine Light".
Runs grreat.
@@Imoverit9414 😂😂😂
Thank for all possible causes. Very informative!!!! Very a FORD able,☺️
Rutherford NJ Drywall Repair- Steve's Home Repairs 👍
This is great information. I would recommend it for any old-school amateur mechanics who think they know it all...
You've probably saved a lot of folk a new Clutch,,, thanks buddy
You forgot to mention the most common intake system component of fuel injected cars. The idle air control valve is what really makes cars hesitate and not start along with stalling.
I have never associated the idle air control valve with engine hesitation during acceleration but rather irregular idle speed and stalling.
Thank you for the help and knowledge, we've been trying everything to get the idle fixed on my 1998 Silverado 1500 vortex. I'm sure with your video we can get it done!
Yes, he made another great instructional video, and it should help guide you. Also, check the coil & IAC, for your idle issues. I just replaced the coil on my 1989 Chevy K2500, now idles much better, hope this helps.
What a EASY FIX!love this video =)
u are a gem - I appreciate the way you put ur video together - thank u so much, ur the 1st video that I've seen that makes the most sense, its never the same thing for different cars - I will return to this video many times im sure to double check myself. U def got my like!
👍😊 Thanks Daniel!
Bought a 2006 chrysler crossfire 3 days back. Been stuffing up the day I got it. These issues as stated in the video. Codes are telling me it's the MAF fingers crossed it's that easy
Clean the MAF on a regular basis. It's easy and cheap. Good luck.
@thisorthat7626 we might have fixed it. Cleaned all the air intake stuff, did the MAF and pretty much every electrical connection you can think off. Still no luck. Sent up to the local service station bought some fuel injector cleaner. Ran that through the petrol tank and now it's driving like a dream. The last owner had it for 7 years (80 year old lady, and she drove it pretty slow for short drives too) hopefully problem stays fix lmao (also the air filters were full of bug bits, feathers and sooooo much dust it was insane)
@@SLOP_JOCKS Good that you fixed the problem. And now you know that the electrical connections are clean. thanks for the update!
Great explanation video, thanks for putting that all together in a straight to the point video🤩
too many ifs getting tired of chasing false leads.
I like your teaching method! Top job😊 greetings from Australia! Just subbed 👍
Greetings Edmond from Australia. Australia seems like a really beautiful place. Thanks for subscribing!
I love your presentation. Great visuals and clear explanations! Will refer to you again.
Great video. This also started playing automatically and I genuinely thought it was Bob Odenkirk talking 😂
For a diesel engine:
Blanking off the EGR was the fix on my diesel.
The exhaust gas was screwing up the fuel mixture and causing a very very bad hesitation and a big puff of black smoke out the exhaust when trying to take off from a stand still. The ECU was not compensating for this and that hesitation was becoming dangerous. The blank plate was the only way to fix this problem.
How can an engine be Euro 5 compliant when that happens? Maybe the testing for this is compliance is suspect?
Until Foton/Cummins come up with an ECU update to compensate for this the blank plate is staying in place in my car!!!
So informative!!! Thank you so much and God bless you for sharing this.
I'm surprised you went over literally every possible thing that could be causing this issue. A like well deserved!
It is an easy fix once you have already replaced everything else that wasn't it 🤣🤣.
The information is great thanks .
That shit got me weak I guess I need another engine!!!
@wisdomoftruth0
No! You need another car!!! 😅🤣😂