I just got my first VR (Quest 3) I bought one of these and it was so lose on the bottom snaps. It would just fall out. I contacted their support and they issued a full refund. So.. sadly the product was bad for me but the customer service was excellent. Also, appreciate the reviews it's helped me a lot as I familiarize myself with VR.
Here's a video of the issue I was having, it was unfortunate and I'm still using the stock interface for now, I do wear glasses atm and plan to get lenses. youtube(dot)com/watch?v=ZPh9Pv0q9d4
Are you using IR attached to the headset or a bigger light illuminating the whole room? I am testing an IR light from Kkcobvr, so there will be a review on my channel.
Mam chilona za 30 zł gdzie dół nie zawsze zaskoczył, ale nie miałem wpadającego światła jak przy amvr. W amvr wpada mi bokiem prawdopodobnie ze względu na kształt twarzy i tego, że silkpad i ten drugi są dosyć cienkie. Właśnie dlatego, że jest on taki rozległy to blokuje się na czole i policzkach poprawiając komfort ale nie mam już punktu podparcia w okolicy oczu. Można dociskać, ale jakikolwiek fitnes po dłuższej chwili powoduje zaparowanie. Jest to kwestia indywidualna i jednym podpasi ten interfejs a innym nie. Silkpad jest super do gierek spokojniejszych. Co by nie robić to gdy się spocimy traci on funkcję chłodzącą. Ja używam pod to bandaż elastyczny albo opaski frotte. Bandaż trochę lepiej siedzi bo jest cieńszy i spełnia swoją rolę doskonale jeśli chodzi o pochłanianie wilgoci.
16 mm to raczej nie jest cienki pad. Nie wiem czy ktokolwiek stosuje grubsze 🤔. Natomiast tak jak napisałeś, od kształtu twarzy i interfejsu może zależeć wpadające światło. U mnie mimo, że większość interfejsów jest szersza od twarzy, to po założeniu ich dopasowują się tak, że wypełniają wszystko, ale nie każdy tak ma. Najgorzej chyba było z interfejsami do Pico, które na nieazjatyckich twarzach potrafiły mieć ogromne wycieki światła.
Magnetic interface from Globular Cluster: Official website: www.globular-cluster.com/GCF3.html?aff=affItSnPHsr Amazon: amzn.to/3A07xcY Full review will be on my channel probably this month.
I've read that, from the most popular models, the ones by Globular Cluster are the only ones that are fully compatible with the S3 Pro headstrap Haven't tried them myself though
@@VrWiz Most facial interfaces should be compatible. Globular Cluster is magnetic and very comfortable. Full review will be soon on my channel www.globular-cluster.com/GCF3.html?aff=affItSnPHsr
What configuration do you recommend to get the best fov? A few days ago I bought a KIWI H4 Boost and a V3 face interface which is on the way, now after watching your videos I realized that I probably won't get the best field of view.
It depends almost only on your face shape - for one person AMVR will have huge fov, bigger than Kkcobvr, for other opposite. Only Oblik makes facial interfaces personalized, but they are very expensive. With other, you will not know until you try them. Kiwi is an exception - it has low fov by design.
@@Thomas_Voland Thanks, I'll wait and pick up my V3, if it's bad I'll probably go for AMVR. As for halo H4 and elite K4, will the fov be better on elite due to the construction? I've had H4 for a week and I don't know if I should change to elite.
@@Thomas_Voland Napiszę już po polsku bo zauważyłem że prowadzisz również polski kanał😅 Właśnie dotarł do mnie interfejs od KIWI i powiem że chyba przy nim zostanę fov jest identyczny co na fabrycznym interfejsie na minimalnym oddaleniu. Oczywiście muszę trochę mocniej docisnąć ale i w oryginalnym też musiałem. Także pod mój kształt twarzy akurat chyba podpasowal 😂
I understand it’s not recommended to use an Elite interface with a halo head strap but can I use a halo style interface with Elite head strap? Will halo interfaces support elite head straps?
There is only one facial interface dedicated to use only with halo straps, and it's only because it has also elite version, so I am not sure why are you asking. I have even whole chapter about it in my review: ruclips.net/video/EJyObM1HNiY/видео.htmlsi=Guy5tco5Te2zwR6O&t=1112
@@christianlamb I use most of the time magnetic facial interface from Globular Cluster: www.globular-cluster.com/GCF3.html?aff=affItSnPHsr Amazon: amzn.to/3A07xcY
What do you think about the new upgrade amvr facial interface for quest 3 ? I'm between this new amvr and globular cluster and I have the bobo s30 pro strap , I'm scare the amvr is made for elite straps
I have a Kkcobvr halo headstrap and I'm planning to buy a facial interface. I was looking at the Kiwi V3, but I heard it's not great for FOV. What’s your opinion on the Kiwi facial interface? I know the Kkcobvr one is the best for FOV, but I’m not sure I want to pay double the price for it compared to the Kiwi. Could you help me decide?
Check my channel tomorrow (max day after tomorrow, I recorded it already just need to edit), because there will be a very interesting video, which answers these questions.
I'm currently looking at using the stock Q3 interface, removing the padding and putting velcro on it, and then using one of the pads from the AMVR one.
i have a bad experience with D-Link VR AIR BRIDGE issus, and now it dosnt work. is there any adapter or router wifi 6E who can work perfectly with Meta quest 3 and the price is under 50$ that i can buy from aliexpress, there is so many adapters but i dont know if they can work
@@Thomas_Voland Thank you so much for this answer. I guess I am torn now. I was dead set on getting the official silicone facial interface, but now I will look into this one and see which is better. For me, I use elite style headstrap (BoboVR) and no glasses, so I should have no issues with this AMVR facial interface, from what I gather from your video. BTW, I have subscribed. Thanks for all the content and I look forward to future videos from you.
@@ASH-ou4cgHey unless the stock interface is a perfect fit for you get something else as the official interface is not really made for all face shape. It's easier to get a good fit with kiwi or amvr
very differentiated review. helps a lot, thank you
Glad it was helpful!
I just got my first VR (Quest 3) I bought one of these and it was so lose on the bottom snaps. It would just fall out.
I contacted their support and they issued a full refund. So.. sadly the product was bad for me but the customer service was excellent.
Also, appreciate the reviews it's helped me a lot as I familiarize myself with VR.
Here's a video of the issue I was having, it was unfortunate and I'm still using the stock interface for now, I do wear glasses atm and plan to get lenses.
youtube(dot)com/watch?v=ZPh9Pv0q9d4
I bought a dedicated IR light so I don't have to play with the lights on, it works perfect With KK Cobb VR and no interface.
Are you using IR attached to the headset or a bigger light illuminating the whole room? I am testing an IR light from Kkcobvr, so there will be a review on my channel.
I switched from the AMVR to to KKCOBVR, because the KKCOBVR has a wider FoV.
AMVR is nice, much better than stock. But I prefer the KKCOBVR.
@@RolandDobbins review of Kkcobvr should be on my channel in November.
Mam chilona za 30 zł gdzie dół nie zawsze zaskoczył, ale nie miałem wpadającego światła jak przy amvr. W amvr wpada mi bokiem prawdopodobnie ze względu na kształt twarzy i tego, że silkpad i ten drugi są dosyć cienkie. Właśnie dlatego, że jest on taki rozległy to blokuje się na czole i policzkach poprawiając komfort ale nie mam już punktu podparcia w okolicy oczu. Można dociskać, ale jakikolwiek fitnes po dłuższej chwili powoduje zaparowanie. Jest to kwestia indywidualna i jednym podpasi ten interfejs a innym nie. Silkpad jest super do gierek spokojniejszych. Co by nie robić to gdy się spocimy traci on funkcję chłodzącą. Ja używam pod to bandaż elastyczny albo opaski frotte. Bandaż trochę lepiej siedzi bo jest cieńszy i spełnia swoją rolę doskonale jeśli chodzi o pochłanianie wilgoci.
16 mm to raczej nie jest cienki pad. Nie wiem czy ktokolwiek stosuje grubsze 🤔. Natomiast tak jak napisałeś, od kształtu twarzy i interfejsu może zależeć wpadające światło. U mnie mimo, że większość interfejsów jest szersza od twarzy, to po założeniu ich dopasowują się tak, że wypełniają wszystko, ale nie każdy tak ma. Najgorzej chyba było z interfejsami do Pico, które na nieazjatyckich twarzach potrafiły mieć ogromne wycieki światła.
Hey thanks for the great video! What facial interface would you recommend to use with the BOBOVR S3 Pro Halo strap?
Magnetic interface from Globular Cluster:
Official website: www.globular-cluster.com/GCF3.html?aff=affItSnPHsr
Amazon: amzn.to/3A07xcY
Full review will be on my channel probably this month.
I've read that, from the most popular models, the ones by Globular Cluster are the only ones that are fully compatible with the S3 Pro headstrap
Haven't tried them myself though
I use most of the time magnetic facial interface from Globular Cluster: www.globular-cluster.com/GCF3.html?aff=affItSnPHsr
Amazon: amzn.to/3A07xcY
@@VrWiz Most facial interfaces should be compatible. Globular Cluster is magnetic and very comfortable. Full review will be soon on my channel www.globular-cluster.com/GCF3.html?aff=affItSnPHsr
Wonder if the new version with the different adjustment system fixes issues with light leakage.
I will make a review of the new version, probably next month.
What configuration do you recommend to get the best fov? A few days ago I bought a KIWI H4 Boost and a V3 face interface which is on the way, now after watching your videos I realized that I probably won't get the best field of view.
It depends almost only on your face shape - for one person AMVR will have huge fov, bigger than Kkcobvr, for other opposite. Only Oblik makes facial interfaces personalized, but they are very expensive. With other, you will not know until you try them. Kiwi is an exception - it has low fov by design.
@@Thomas_Voland Thanks, I'll wait and pick up my V3, if it's bad I'll probably go for AMVR. As for halo H4 and elite K4, will the fov be better on elite due to the construction? I've had H4 for a week and I don't know if I should change to elite.
@@Thomas_Voland Napiszę już po polsku bo zauważyłem że prowadzisz również polski kanał😅 Właśnie dotarł do mnie interfejs od KIWI i powiem że chyba przy nim zostanę fov jest identyczny co na fabrycznym interfejsie na minimalnym oddaleniu. Oczywiście muszę trochę mocniej docisnąć ale i w oryginalnym też musiałem. Także pod mój kształt twarzy akurat chyba podpasowal 😂
I understand it’s not recommended to use an Elite interface with a halo head strap but can I use a halo style interface with Elite head strap? Will halo interfaces support elite head straps?
There is only one facial interface dedicated to use only with halo straps, and it's only because it has also elite version, so I am not sure why are you asking. I have even whole chapter about it in my review: ruclips.net/video/EJyObM1HNiY/видео.htmlsi=Guy5tco5Te2zwR6O&t=1112
Wasn't the Q3FC3 version available when you got the second one?
I would think the light leak issue would be fixed with the knob design.
I tested it for many months before publishing the review, and Q3FC3 was just announced.
Quality review as always! Thanks! What is the preferred facial interface for halo straps, bobovr s3 pro?
@@christianlamb I use most of the time magnetic facial interface from Globular Cluster: www.globular-cluster.com/GCF3.html?aff=affItSnPHsr
Amazon: amzn.to/3A07xcY
What do you think about the new upgrade amvr facial interface for quest 3 ? I'm between this new amvr and globular cluster and I have the bobo s30 pro strap , I'm scare the amvr is made for elite straps
I didn’t test it yet, but on photos looks like the same size like previous version, so for elite straps, not halo.
I have a Kkcobvr halo headstrap and I'm planning to buy a facial interface. I was looking at the Kiwi V3, but I heard it's not great for FOV. What’s your opinion on the Kiwi facial interface? I know the Kkcobvr one is the best for FOV, but I’m not sure I want to pay double the price for it compared to the Kiwi. Could you help me decide?
Check my channel tomorrow (max day after tomorrow, I recorded it already just need to edit), because there will be a very interesting video, which answers these questions.
Buy the ourvr facial interface and and they send u an amvr 1 for half the price, don’t ask why, that’s what u get
Theres at least 3 different companies shipping the same item, all poor..
@@Trig0r for 16 bucks I was pretty impressed
I'm currently looking at using the stock Q3 interface, removing the padding and putting velcro on it, and then using one of the pads from the AMVR one.
@@Trig0r hmm, it did come with 3 pads, might try that myself 😂
i have a bad experience with D-Link VR AIR BRIDGE issus, and now it dosnt work.
is there any adapter or router wifi 6E who can work perfectly with Meta quest 3 and the price is under 50$ that i can buy from aliexpress, there is so many adapters but i dont know if they can work
@@zouheiribnabdeljalil7634 yes, on the bottom of vr.thomasvoland.com is.a list.
So for those without glasses and a BoboVR Elite strap, would this strap be better than the official Meta Silicone interface?
Yes, for me, it is definitely better. Silicone gives only sweet-proofing; it has low impact on comfort.
@@Thomas_Voland Thank you so much for this answer. I guess I am torn now. I was dead set on getting the official silicone facial interface, but now I will look into this one and see which is better. For me, I use elite style headstrap (BoboVR) and no glasses, so I should have no issues with this AMVR facial interface, from what I gather from your video. BTW, I have subscribed. Thanks for all the content and I look forward to future videos from you.
@@ASH-ou4cgHey unless the stock interface is a perfect fit for you get something else as the official interface is not really made for all face shape.
It's easier to get a good fit with kiwi or amvr
did you say pure leather or pu leather?
@@VRStoned1978 PU. There is text on the screen.
Thank you for your hard work providing good information
I should finish testing H4 from Kiwi next month, so there will be a review on my channel.