Making an EVEN FASTER Turning Rubik's Cube
HTML-код
- Опубликовано: 20 мар 2020
- In this second installment of my quest for the furthest-spinning Rubik's Cube, I integrate some suggestions from my last video, getting a new cube to turn nearly twice as far!
Watch the original here: • Making the FASTEST Tur...
Use discount code "z3cubing" for 5% off everything at TheCubicle.com! www.thecubicle.com/?p=HJMGVPebP (Affiliate Link/Code)
Intro Music: "Forces" by Jim Yosef [NCS Release]
• Jim Yosef - Forces (fe...
Outro Music: "Ruby" by Jim Yosef and Alex Skrindo [NCS Release]
• Jim Yosef & Alex Skrin...
Merch: teespring.com/stores/Z3Cubing
#RubiksCube #cubing #Z3Cubing - Развлечения
*Meanwhile in an alternate universe...*
Z3Cubing is making the slowest cube possible by pouring glue and maple syrup in it...
And starting with a rubies brand
Just get a solid block and put 3x3 stickers on it
@@wakkle you are big brain
@@akgamer1825 no u
Alex Marat dollar store brand
I promise I'm not trying to make all these videos 9:59, it just kinda keeps happening...
Dont lie YOU JUST WANT TO BUILD UP TRUST SO YOU CAN SCAM US (lol)
I never even realized that lol
Z3Cubing nah...
Are your logos in your merch store 3x3 size?
*very impressive*
I dare you to use that cube in a comp
U12 cube challenge
@@nickd7225 lol
Oh thanks i thought that you and all the other viewers won't like it😉
AlexD- Racer na it’s a good idea
AlexD- Racer ya
You should essentially make each side a fidget spinner by using ball bearings
*yuxin huanglong throwbacks*
Not gonna lie that seems like a lit idea that i want to have.
You stole my profile picture
yes i was thinking of that
exactly my thinking
This is exactly what you don’t bring to a nervous competition 😂
Ye tru
Bank worker: You need an extra 3 dimes to make an equal deposit.
Z3Cubing: Okay lemme break out my wallet.
*pulls out a 3x3*
Lol y doesn't this get more likes its so funny
bready Brett twoset fan i just saw you from another video askng someone why theyre comment isnt underated, good to see you hear
tf i mean here*
@@swiftified4662 ayyyy ,ingling wannabes everywhere
Tf l meant lingling*
Me: *does U429*
My sleep paralysis demon: *impossible*
SupremeDucksHD I like this comment a lot 👌
CookieCubing123 thank you!
You were nine away from greatness.
roav liller it’s a joke:/
you:U9999909099999999999999989797 1234567890t
2:22 , taking the springs out......
3:25 , taking the magnets out......
4:45 , making the cube heavier by putting magnets (not to magnetize)
6:37 , again putting magnets except white side and also lubing the core with Lubicle Black......
7:54 , lubing the peices with DNM-37 and Max Fleet......
And then does a U-12......
thx
Are u kidding me? U spoiled it
@@ScrillyStories y u looking at comments while watching vid
@@ScrillyStories you looked at the comments before you even finished the video? what is wrong with you
😊
Wowzers. Imagine using that in an actual solve.😂
WCA Comp? Sorry but doesnt comply with regulations.
@Cuber 7535 Just as a solve. I wouldn't be able to get sub-1 minute!😂
I see u everywhere!
Wind Productions just say it doesn’t follow the rules. Using big words make you look stupid
@@shamuboi3261 Me?
Put the magnets repelling each other so that it will just keep going
*illuminati noises
I don't think that will work because it also repels it in the other direction. I would like to see what it does.
@@wrog7616 stuck at half a turn
MeadowsGang Illuminati
Wrog U1
QnA from comments
Q: Can I use this in a comp?
A: Doesnt comply with WCA Regulations.
Regarding to the question above, it wont comply, it can _possibly_ get you kicked.
Wind Productions why not?
Magnets have to be everywhere I think technoblade
Why? I think that the user can set it up like they want. I think that even the cube with the dimes in it is comp legal
Magnets must be in the whole cube not just one part.
@@chilledwavez your allowed to have magnets, and tension the screws, the dimes i think break a regulation. and the fact he removed springs entirely is illegal.
When you accidentaly put the sensitivity to 1000% in a game:
*s e n s i b i l i t y*
I believe its sensitivity but k-
"sensibility" lol
Ron Sexton no
Where Am I but it is
Someone should invent a 3x3 with a motor so it can do U 100+
I think i can MAYBE do it
I have a litte motor laying around and a warrior w
here I uploaded this to my other channel but here ruclips.net/video/dQw4w9WgXcQ/видео.html
B7Cuber that is incredible how did you do that
@@ANBAT Well you see I used a small motor I had lying around, and I completely gutted the cube and put the motor in, and attached it to the top layer, flicked the switch and boom. by the way I used an old Qiyi Warrior. It's still spinning now!
If you hold the up face and flick the bottom two layers, you can get a lot more spinning by measuring Dw instead of U.
Yeah we don't talk about that one...
Me after watching the U7 move: pls have mercy
Z3CUBING: there is no mercy
U12 move
Uno reverse card
*music intensifies*
69 likes so not liking
Star Wars clone wars reference?
*I am speed*
At this point it’s just a fidget spinner
Rubik spinner 💀☠️☠️
If you invert the magnets in the corners and edges it might reduce friccion more than if it doesnt have magnets at all
someone have this man put ball bearings on the ends of the core and basically just make a solveable fidget spinner
Next video: *Making my cube a fidget spinner*
Hehe
What if you put the magnets in the cube such that the magnets of the pieces of the top layer repel the pieces of the middle layer?
The pieces of the top layer stay together but repel the middle layer.
I wonder if that's possible
It would just make the cube stuck at 45 degrees
@@alexanderwu With that logic, the normal placement of magnets would make the cube unable to turn.
@@hairtoss7975 I mean it wouldn't literally be stuck but it would be hard to keep aligned
This isn't even Z3's final cube form.
When new vid m3ko?
@@OP-pe4yc Good question
Hi!
@@OP-pe4yc hopefully by tomorrow 🙏
@@marshi7777 ayyyy what's poppin'?
I believe the reason the Cube was spinning faster when they were magnets was because the amount of energy he's finger had to put in to breaking the magnets was so high when there's no Force pushing against his finger he can't put that much energy into the Cube.
Your channel is so great! You spend so much time during these videos and is makes a great result!
This was really entertaining and you spent a lot of time on this thank you 😃
Amazing video! Im watching many of channels like yours and i think your RUclips channel is the best!
Keep making carrier
Imagine just taking the cube apart at a comp.
the magnets made the rest of the layers stable and aligned which makes the cube have less friction, also use the gts 3 since it is already super fast and i get like u3s while turning normally without trying to flick the cube really hard. Also you should have you finger in between the top and middle layer, and start pressing really hard, and slowly more your finger up till its in only the first layer, i got a u4 on a stocked lubed gts2 and like a u6 on a stock lubed gts3
Nobody: ...
Z3 Cubing: Lets make a cube that can do u12!!!
Z3 after puttning in the Max lube: Lets see how this TURNS out.
Get it
Yes but its not funny
hellopablitonoob gaming don’t be mean and yeah get it
Next videos : Even faster cube U15
U10000000
Saturniun YT Tech U10000001
Thank you so much for making these!! Makes my sons day so much better!!
I think if you did this again but with a gan 12 pro, it would be insane. The corner to core magnets the "auto turn" it would help accelerate the cube in the last turn
Amazing, but you can add same polarity magnets in the side you want to turn to reduce the friction even more
levicube
Take out edge magnets and put them back in with opposite polarity. If magnet atraction slows it down, then magnet repulsion should speed it up :D
Alej Random 2000 iq
Ah yes, _piece MagLev_
I don't know why I started dying when he said "that's epic"
Last cube in a store: stop hurting my bros
*walks in*
NO DONT TAKE ME PLSSSSS
Heyy z3cubing this is just to inform that a channel named @decoding cube has challenged you to make the fastest pyraminx he has made a pyraminx that turns 13 times in 1 push
Z3: makes tbe fastest cube
Gallon of Lube: hold my lid
If you reverse the magnets the parts (if the magnets is strong enough) will be frictionless. It should help with friction so you can make it even faster ;)
OMG this is so cool i have to try this out!!!
You should’ve reversed the polarity of the magnets see if that would’ve worked.
I made a faster cube I took Mr. m removed the springs and did the same thing I losed the screw and added Greece,oil also ball bearings which could do u18
Edit it's makes the cube faster not make it do more turns
I will help u to 100k
let’s put Greece in this cube to make it faster!
My friend had a cube that when you flicked it it would keep spinning like one of those fidget spinners. It was crazy
Lol
I like your idea of the repelling magnets as a spring.
You could go one step further and use ball bearings in the center peaces.
And you could try to kind of polish all the other peaces to reduce the friction among them as well. Or maybe clear coat and then polish them.This way I'm sure you could get more than a U12 ;-)
but abviously you can only use a really small amount of the clear coat and maybe need to send them down a littel bevore because you cannot make the peaces any bigger.
"woahh u6, that's epic"
Boom!! Break the WR now😂😎
PLEASE ANSWER how to I take out the thing in the middle of the center when trying to do maglev tensions I am using a valk 3
Look for ridges in the cap, try and pull it then, otherwise use a screwdriver. If its a rubiks brand it wont work.
I always wait for the moment in the outro where he just throws cubes at whatever he was doing.
Turn over the cube and see how many D turns you get. Because the pieces are weighed down slowing them
Lol, I'm trying to learn F2L and I see a new vid pop up and I realized eyyyyy that's the same cube I'm using right now. My GAN XS comes in tomorrow and I can't wait. I got the beginner's method down and now I'm moving on to F2L.
The GAN really isn't necessary if you're still learning, I have a $10 magnetic YuXin Kylin V2 and it serves me well, my PB is 15.65
Wow you use Gan xs while you're leaening f2l !
Well I'm using thunderclap v3m ... My average is around 28 secs
Happy cubing :)
Keep up the good work I'm sure you can solve it in seconds since I'm a kid that's 10 and can do 47 seconds at least or under a minute
Thats almost the same for me but i have the GAN356R
My gan X serves me well, and my PB is 9.65
That's awesome!
Next make the most quiet cube possible, and the loudest cube possible!
Someone: makes a good meme
Everyone:
What if you could have turned the magnets around so they repel and keep turning
Unless that’s not how physics work
0:43 when u are so rich u litterly stuff your cube with money
literally
Not litterly
@@somebony alright.
You can put the magnet with the same pole, that way the force is opposite and creates a levitation effect, further reducing friction
I got inspired by you now i got my own cubing Channel! 😀 Thank you for inspring me
Nice
Next challenge: Use that in a comp!!
Copied
Unable to comply with WCA regulations.
@@windproductions343 but you are ruining the joke
@@eepy-eli I think he was being sarcastic
Dude, I just realized I have to cube that you used for this video!
The reason why the magnets in the cube made it turn faster is because the magnets helped the cube align better so there won't be other pieces interfering with the turn
i edited my comment so the replies wont make sense
Edit: plz stop giving hate comments plz
Haha... might me possible.
Like a fidget spinner but better
It’s legit gonna fly away into space lol
He uses lube and screws and stuff and springs
Me: just makes motorized cube that turns FOREVER
Man alex is just crazy good
I saw the thumbnail and was like “no that is well click bait” I feel SOOOOO stupid now 😂 great video btw z3
Awesome vid love it!!!!
Bring this to a comp the judges will love you
I litterally watch the other one 10 minutes ago I-
Our avatars look almost the same
Ooh yea
For those of you seeing the U12 here it is 9:20
Thank me later
Whoa *what?* a *U12* ? I gotta rewatch that!
SATISFYING TURNING
10:00 again
No it’s 9:59
BRUH U COULD OF MADE MONEY!!!! U WERE ONE SECOND OFF THE 10 MINUTE MARK smh
lol
That was probably intended
Just to annoy people ;-;
Love these vids!
Great video good tips!
the reason the magnets made it faster is that it is given more momentum each time magnets pull to each other
Man don't tell me the video's 9:59 minutes long 😂
Cmon Z3 you gotta put some efforts in 😂
Him: “I think I’m gonna make a whole video of my flicking one side.”
His finger: 👁 👄 👁
Him:*says he wouldn't wanna speedsolve with the Mr M*
Me: *used it as my main for 6 months*
Another mod is to sand the pieces down in a certain way to cause a loss of friction. This would also make the cube lose stability
This dude is flexing the amount of money he has in each cube piece
idk how you would implement it but what about using ball bearings?
Also, you should probably have tried to use some good ol’ Maru, since last time, it worked really well, and the other lubes didn’t make a dent after it.
Now try to get it to do as many M slice moves as possible instead of U moves!
Great video mate!
Try to turn the Dw layer, since it is way heavier it will turn much longer, try it on a normal speedcube and you’ll also see the difference
Z3 cubing: so first off I-
My mum baking and using the blender:so you blended food to get a Rubik’s cube?
You need reverse magnets in the core instead of springs to reduce friction and then light magnets in the corners for stability
the first guy to came up with MagLev...
he has a bonus channel called Z2cubing and this cube is features in a video from that. in the video, he managed to get a D52'!
For anyone reading this comment, the video title is “Oops.”
Replace the center pieces with ball bearings. That would be insane
OH, so THAT'S why he made a video of doing a D52 on Z2Cubing called "oops"!
the reason why the Mr. M turns more with the magnerts is because the magnets are way too strong. And because they are strong they attract each other more BUT also repel each other even more. I know that cause i put magnets that were 3x stronger than n54 in my cube and tested it. They attract each other but the force of them repeling is enough to prevent them from stopping the cube.
Ye
🇦🇪
🍥
What cube brand would you say is the best for speed solving ( I'm a beginner my best time is
2 min 49 sec not the best but I want to improve and I would love to know some tips and tricks to get faster) plz respond please
Get a speedcube (get a cheap one like Yuxin Little Magic or the MF3RS etc.) and just do a lot of practice. Once you get under one minute, switch to a better method (like CFOP or Roux).
Imagine if you made a cube called something like, ‘INFINITE SPIN CUBE’ where you just put a motor inside it and made it activate when you spin the top layer
you are amazing dude😃
You should do all the stuff you did to the Mr. M but do them on the mgc elite since it’s fast and then put the springs on 1 or 2
try to take the springs of any 3x3 and tape the fastest side and the opposite of it (to make it stable) and it goes damn fast
Rubik's Brand company: we're still win
Becasue logic
still remember when you kept saying “Make sure everything is square”
I did not do any thing to my cube and it does a u 4 it is a fan xs and it is pretty loose mid mags
Non-Cubers: NOOOOO!! You can’t modify it!
Z3Cubing: *haha u12 go brrrr*
You should have the magnets retracting eachother so instead of having the magnets in a N - S configuration you should have the, repealing eachother as a S - S or N - N configuration crests a not friction surface that spins freely
5:05 cube solve hero: are you challenging me